Hi everybody!
We just released on the Play Store a free app called QshareR.
The main idea is to give an easy way to transfer text from pc to smartphone.
To do it, surf to our webpage qsharer.com [*need link here*], insert your text and create the QR code. Scanning it with QshareR you will have the text automatically copied on your smartphone clipboard, ready to be shared through any app installed on your phone.
It is also possible to encrypt the QR code that contains your text, with a 4 digits PIN. So you can share the QR publicly, but it can only be read by someone who knows the PIN. Scanning an encrypted QR with QshareR will automatically make appear a dialog, now insert the right PIN and you'll be able to read the content.
Play Store link: play.google.com/store/apps/details?id=com.ackorim.qsharer
We'll keep improving the app, so any comment, tip or review is more than welcome!
Let us know what you think, thanks! :laugh::good:
Hey, is someone able to scan the qr code on chrome browser to use whatsapp Web on the tablet?
Here the qr code is cutted and I can't scan it, because it's not complete.
How can I solve this?
Hi everybody from Quebec city
My Bip watch is is with firmware 0.1.0.86
How could I show the record tracking on my walking on Google earth or other ?
I'm on Mac and I have a android phone to "sync" with Mi-Fit and Notify & Fitness app install
(android 5.X)
You can export the .tcx file on Notify and Fitness app, then import it into whatever mapping software you want.
How?
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
pinkabou said:
Seem we have many version of Notify and Fitness. What is the version I need and where do I "extract" GPS tracking ?
Thanks in advance
Click to expand...
Click to collapse
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Big Thanks
Kéno40 said:
Notify and Fitness fior Amazfit
Pro version is needed to see the content of the messages.
For exporting, just open the activity in the app.
On the top right, there is a 3 dot menu
Synchr with others apps
You have 4 choices : Google fit, Export tcx, Strava or RunKeeper
Click to expand...
Click to collapse
I finally be able to sync and export to my iMac and see my run on google earth app
Seem precise for the recording
I'm happy
but how I can do it on iOS?
ciopik said:
but how I can do it on iOS?
Click to expand...
Click to collapse
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
FREE
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
iPhone/ iPad supported !
Joost39/2 said:
You sadly can´t - so I sold my iPhone X and bought an Android phone
Now I can sync any TCX file with or without GPS to Endomondo etc. or directly to Strava from Notify & Fitness and from there automatically to most other platforms through the website Tapiriik.
Click to expand...
Click to collapse
Found 'AmazTools' in the Apple App store recently, and it works well on latest BIP s/w version !! Including GPX/ Strava/ loads of WatchFaces, and extra button functions. Give it a try!
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
Thanks, it's still working, but I had to set in Mi Fit my Amazfit Bip as visible BT device, then pairing with Gadgetbridge was ok.
Hello @Vinicius_Gonzo & @adrianfp
Vinicius_Gonzo said:
I guess everybory already spent their money on the Notify and Fitness Pro.
But for those who want to know, i have found a Free Way.
Install these apps: Gadgetbridge and GPX Viewer.
In Gadgetbridge you will open the activity and choose the GPX Viewer.
And that's it. Now your .gpx file is in the GPX Viewer folder.
(Gadgetbridge is still a work in progress, but i succeeded here)
Click to expand...
Click to collapse
I tried GB but i had somekind of offset in GPS trace, did you experienced the same..?
adrianfp said:
Hi,
for those using Notify & Fitness. I also use this app, but I have observed a problem in the 1st km statistics when running. Strava will show between 30-40 seconds less for first km compared to what the watch shows, or what you can see in Mi Fit or Notify.
When I export activity to tcx file, I see that first tracking points, aproximately first 200-300 meters, always has same time stamp, and that is causing problems in Strava. So far I dont know if this is a problem of how Notify & Fitness export data, or is the watch that is doing it wrong, any idea?
Thanks
Click to expand...
Click to collapse
Trying N&T i get a slight difference, here are stats :
- mi fit : 3.87kms / 14min43sec
- N&T : 3.88kms / 15min03sec
- Strava : 3.87kms / 14min17sec
Haven't much other tracks, i'll try, is it alike what you experienced..?
Further informations here : https://forum.xda-developers.com/showpost.php?p=78148443&postcount=78
Thanks in advance for insight
Regards
Hello @Vinicius_Gonzo
That kind of offset : see attachment
I didn't used gpx viewer but took directly gpx file from Android/data/ee.aegrel.gadgetbridge/files
Thx
Hi,
What's the easiest way to export GPS data to a PC? I have Android phone, not iOS.
Also, how long will be battery last with GPS recording? What's the record frequency (1 pt per second, etc)? And how much data can it hold (e.g. 10 hours)?
Thanks
Hi, have you found a solution? I will only use gadgetbridge and not mi-fit (data-collector)
Hi !! Have you try to use ZEPP App for connect AMAZFIT BIT to Strava ??
Thanks for the tip, it works just fine, I have a question though: the workouts in Gadgetbridge are all off by 1 hour, so my Strava runs aren't in sync with my friend' tracks, have you met this isuue?
I had a bad experience where my phone prompted me to repair the stratos again for unknown reason. I tried and of course it wouldn't pair. So i thought i would just disconnect and pair it again. Big mistake!
The QR code in the watch was nowhere to be found. Then i realised it would only pop up on initial setup after booting from factory settings. So long story short, i had to factory reset it just to get QR code to pair back my phone and watch, lost a day's data. This setup is thoughtless, in my opinion.
JJ
I facing this issue when i get my phone today
just reboot the watch and my phone able to pair with it already
1. You can always show QR code, simply by enabling app list and starting a (hidden) builtin app called "BLE connect", search XDA for more info;
2. Your report is very weird, first I have never seen a "prompt to repair" anything on phone or watch (I have Pace), what exactly showed this message? Amazfit app? Secondly, if you logout from your account on Amazfit app and remove the watch from phone's Bluetooth settings it automatically pairs again next time you login (using the same account, of course).
I've just try and error here, and succeed.
Apparently, another way would be generate the QR code online using the Bluetooth address of the watch, then scan using the phone.
QR code picture
I have had this happen to me several times so the last time I needed to re-pair the watch, after defaulting the watch to bring up the QR code I just used my wifes phone to take a picture of the QR code. Now I can just scan the QR code jpeg off my laptop screen with the phone app to pair the watch and keep all of my settings, watchfaces etc withought a default reset on the watch.
Showing QR code on Stratos 2
lfom said:
1. You can always show QR code, simply by enabling app list and starting a (hidden) builtin app called "BLE connect",
Can you please provide more information on this - it doesn't seem simple or obvious to me. Thanks
Click to expand...
Click to collapse
graemekw said:
Can you please provide more information on this - it doesn't seem simple or obvious to me. Thanks
Click to expand...
Click to collapse
Either install Amazmod and go to settings->QR code or go to watch settings->about click many times on serial number until Lab is unlocked, scroll down, a new selection "Lab" will be shown (inside about) click that and then click on App List. Get out of settings, your launcher will be restarting, go to apps and select the "BLE connect" app.
Hi,
I found how to enable "Lab", clicked on it, but don't have "App list"...
the simplest way is to generate a qr code with your devices bluetooth address (like "12:34:ab:cd:89:xy"). and just scan it in the app.
please help me
qr code does not appear on my amazfit verge
I already uninstalled the app on my phone
already reset the settings in amazfit verge
nothing solved
can you help?
qr code on my amazfit verge
almirfiorio said:
please help me
qr code does not appear on my amazfit verge
I already uninstalled the app on my phone
already reset the settings in amazfit verge
nothing solved
can you help?
Click to expand...
Click to collapse
Yes. I'll try..... You need to do a factory reset of the watch or you can install the amazmod app/widget on the watch and on your smartphone. On the amazmod app on the watch then you'll have menu item qr-code where you can redisplay the code.
About how to install amazmod on the phone and watch just search this forum or go to https://forum.xda-developers.com/smartwatch/amazfit/app-amazmod-t3810252 where you find everything explained. Hope this helps you further. Cheers