autoinstaller_twrp:
1) Download the archive, unpack it to any disk
2) Switch to fastboot mode (power button and volume down, hold until the logo appears)
3) Run the file "RUN TRWP.bat", then space, wait, space again to close the window
4) Reboot into recovery mode.
Hello my friend. Are you good ? How i see if my 12t pro is a12 or a13 version ?
tbarrosaugustoo said:
Hello my friend. Are you good ? How i see if my 12t pro is a12 or a13 version ?
Click to expand...
Click to collapse
Go to settings,my device ,and you will see android version , miui version that you using....
Related
can any one pls help me ..i want to knw hw to root karbonn smart tab 3 blade.i am unable to install cracked games n apps
thanks
aleemmjf said:
can any one pls help me ..i want to knw hw to root karbonn smart tab 3 blade.i am unable to install cracked games n apps
thanks
Click to expand...
Click to collapse
comes pre-rooted, afaik. install superSU 1.04
m0han said:
comes pre-rooted, afaik. install superSU 1.04
Click to expand...
Click to collapse
My Smart Tab 3 is stuck at the boot-up screen.
I found this link http://forum.gsmhosting.com/vbb/f824/how-karbonn-st3-flash-1697678/
I downloaded both ROM and Flashing tool but it did not help:
1. I don't know how to bring ST-3 in download mode (I tried Volume - and power)
2. The Driver availabe at the link is also not getting installed, it shows device unrecognised.
Try this
bediinderjit said:
My Smart Tab 3 is stuck at the boot-up screen.
I found this link http://forum.gsmhosting.com/vbb/f824/how-karbonn-st3-flash-1697678/
I downloaded both ROM and Flashing tool but it did not help:
1. I don't know how to bring ST-3 in download mode (I tried Volume - and power)
2. The Driver availabe at the link is also not getting installed, it shows device unrecognised.
Click to expand...
Click to collapse
It is because livesuit needs tab to be in download mode
Unlike samsung, we go to download mode by pressing vol- +menu + power,
In tab,
1 switch tab 3 off
2 press volume down (or up....I dont exactly remember..try both)
3 keep pressing and put the usb in
4 press power repeatedly untill Tab gets detected via LiveSuit
Also I would ask u not to update to jelly bean as I just updated and Its too buggy... lags too much and all
In case u get image of Stock ICS 4.0.4, Please put the link here!
Im in a bad need of it
Hit thanks
another easy option is to take it to service centre,, they'll restore and then just install SU.
TWRP INSTALL TUTORIAL OF GALAXY CORE PRIME [SM-G360H] 100 % WORK
REQUIRED :
1.A windows pc 32 bit.
2. SM-G360H TWRP 4.4.4.tar File
OKK LETS START....!
1. Download SM-G360H TWRP File from this link
mediafire.com/download/xadnurbtu2s54ob/SM-G360H__TWRP_4.4.4.tar
2. Put your device on USBdebugging mode,,
Go to (-->About Device--->Bulid Number (tap it {7-9} times)---> now you will be able to go to "Developer Option"* Now tick USB Debugging mode.
3. Install SAMSUNG usb driver your computer.
mediafire.com/download/23pvwn5l5an8s6i/samsung_android_usb_driver.rar
4. Power off your phone,Connect your device to your laptop..
Now open Odin as administrator..
5- Now press and hold (volume down + HomeScreen key + Power key) then press volume Up to continue...
6- Go to Odin when recognize your device click "AP"* then select were does "360H TWRP.tar"* saved and click Start.
After Finished your phoneboot automatically..
7. after install Twrp successfully your phone reboot automatically..
8.then press (home button)+ (volume + button)+(power button) all button and wait until go to recovery mode...
ENJOY IT..
NOTE- [I DON'T RESPONSIBLE FOR ANY DAMAGE OF UR PHONE]
Anyone have a link for a TWRP image for a SM-G360V ?
thanx
it works....!!!!
i have tried it multiple times and it is successful but when i go in recovery mode idont have twrp..................................... pls help....
:crying:
This video will help you out
HADIHASSAN04 said:
i have tried it multiple times and it is successful but when i go in recovery mode idont have twrp..................................... pls help....
:crying:
Click to expand...
Click to collapse
Here is a video posted by #MobileScience team on how to flash and boot into custom recovery like #TWRP .
Kindly watch it and enjoy & if help you out then just subscribe the channel and ask your friends and to do the same and also share the video with your friends and WhatsApp group.
If YouTube video not playing then go to the below mentioned YouTube link to view the video.
https://youtu.be/-FT-brwwj-o
Thanks. But where is marshmallow touchwiz rom sir? What happened? What went wrong?
arnette said:
Thanks. But where is marshmallow touchwiz rom sir? What happened? What went wrong?
Click to expand...
Click to collapse
first..this is very old twrp thread...anyways about tw mm dont worry. will make thread later.
mv2007 said:
first..this is very old twrp thread...anyways about tw mm dont worry. will make thread later.
Click to expand...
Click to collapse
mobile data will not be fixed? as without them.
Sent from my Samsung SM-G360H using XDA Labs
Any 1 have a link for Samsung Galaxy Core Prime sm-g360v ?
Hello, I am fresh Xiaomi Redmi 3s user. I want to flash my rom to latest global dev version but i can't start the download mode.
I am holding vol up + power button, phone starts in Recovery Mode, I click the Download button and smartphone starts the system normally without any „black screen”.
Do you have any ideas how to flash this phone (bootloader disabled)? I need it because there is small bug with BT that make impossible to use Mi Band.
Thanks in advance.
mustek36 said:
Hello, I am fresh Xiaomi Redmi 3s user. I want to flash my rom to latest global dev version but i can't start the download mode.
I am holding vol up + power button, phone starts in Recovery Mode, I click the Download button and smartphone starts the system normally without any „black screen”.
Do you have any ideas how to flash this phone (bootloader disabled)? I need it because there is small bug with BT that make impossible to use Mi Band.
Thanks in advance.
Click to expand...
Click to collapse
i am a redmi 3 pro user so i dont know how you can go to edl mode.google on how to boot redmi 3s in edl mode then you can flash the rom.
can you boot on fastboot mode ?
So I check this tut: xiaomitips.com/guide/how-to-put-redmi-3-into-edl-mode/
1st method doesn't work. Phone restart and starts system normally.
2nd don't work on win 10 64bit,.
3rd - nothing happens. Phone shows battery charging. Nothing more.
BUT on the windows 7 64 bit second method works correctly
Hi there!
Two simple guides for you... since I had a lot of trouble finding all the information in one post.
1. How to get into recovery mode on our Nokia 7 (TA1041).
2. How to restore stock (official) software phones shipped with unofficial software so you can easily update to the newest software!
This is what to do, and it WORKS!
1. Shut the phone down.
2. Connect a power source. Wait for the device to start charging.
3. Press and hold Volume Up and Power Button together. Release the Power Button when the phone vibrates, but keep the Volume Up pressed.
4. If you do it correctly, then you will be on the "no command" screen of stock recovery.
5. Press and hold the Power Button and quickly press and release (so 1 short press) the Volume Up key . Then release the Power Button too.
6. You should be in the recovery. And you can now use the Volume Buttons to navigate and Power Button to select your choice.
Good luck!
Oke, so I thought it might be useful to share some other info too..
If you bought a Nokia 7 from China and it has the unofficial software which can not be updated this is the way to get it back to 100% stock!
What is needed?
Minimal Fastboot & ADB
Unlock key (from the_laser or techmesto - search for it on Google)
Stock firmware & OST LA & Patch (Google Drive link - thanks to hikari_calyx & Heineken78)
0.1 You need a bootloader unlock key. Some users on here know how to make it, I do not. I bought mine for $5 here on a website called techmesto allthough I rather see it as a donation because the guy is really helpful and excited. He also has a Nokia 7
0.2 Install OST LA, copy patched .exe to the installation folder.
0.3 Install Minimal Fastboot ADB
Then the real works starts:
1. Start up you Nokia 7 and in the Google Setup click "next" all the time. When it asks for a username just press "ok", do not write anything as a username.
2. Go to about phone and tap "build" 7 times to get acces to developer options.
3. In developer options allow "oem unlock"
4. Turn of the phone and boot into Download Mode (which is fastboot!): plug in usb charger and then press Volume Down and Power Button
5. Use the following fastboot commands:
Code:
fastboot devices
fastboot flash unlock [unlock_file.bin] #whatever the name of your unlockfile is
fastboot oem unlock-go
6. Select "Yes" by pressing Volume Up and Power Button
7. Phone will reboot. Now go back into Download Mode (fastboot).
8. Use the following fastboot commands:
Code:
fastboot flash unlock [unlock_file.bin] #whatever the name of your unlockfile is
fastboot flashing unlock_critical
9. Select "Yes" by pressing Volume Up and Power Button
Now your phone is fully unlocked.
10. Go into Download Mode (fastboot again).
11. Unpack the stock rom file and open OST LA (by opening the patched onlineupdatetool.exe). Click "edit phone information". Wait for the error and click "ok" then click "next" and select the stock rom file and click "next" again, the software will now flash the stock rom and reboot.
12. After reboot, turn off the phone and go into recovery mode.
13. Select "factory reset" with the Volume Buttons and click Power Button to do a factory reset, then reboot the phone.
14. Turn off the phone again and enter Download Mode (fastboot).
15. With Minimal ADB Fastboot use the following command:
Code:
fastboot oem lock
16. Select "Yes" by pressing Volume Up and Power Button
17. Your phone will now boot into Android. Now you have Android 7.1.1 stock rom with locked bootloader! Go to system settings and start updating your phone
Good luck! Hope this helps out. It helped me out for sure!
Q: I get stuck on the "Powered by Android" screen or the phone keeps rebooting into Download Mode?
A: Just plug in the phone, get into Download Mode and use OST LA to flash the firmware. Nothing needs to be flashed, it will get stuck. But after it gets stuck you can reboot your phone again!
Thank you so much for the guide! It worked for me
However, I could only flash the stock rom with the OST v6.0.4.
During flash OST v6.1.2 blocks when 'Checking device status' and nothing happens.
Just a warning to other users that might face the same thing.
Cheers!
So if I do this I will get ota update to 8.1 and maybe (in future) 9.0 Pie? Another question, I will have my native language Brazilian portuguese or only chinese and english?
There's no way to "translate" it to portuguese? Thankyou.
I have problem with fastboot devices - it not see my Nokia 7 at all...
PaideLis said:
So if I do this I will get ota update to 8.1 and maybe (in future) 9.0 Pie? Another question, I will have my native language Brazilian portuguese or only chinese and english?
There's no way to "translate" it to portuguese? Thankyou.
Click to expand...
Click to collapse
1. Yes, you can update via OTA to Android 8.1.
2. Only Chinese and English.
3. You can add more languages by using "MoreLocal2" app on Play Store. Search tutorial on YouTube, many people make video about this app.
kaisoulpro said:
1. Yes, you can update via OTA to Android 8.1.
2. Only Chinese and English.
3. You can add more languages by using "MoreLocal2" app on Play Store. Search tutorial on YouTube, many people make video about this app.
Click to expand...
Click to collapse
Wow cool.
One last question (I swear): Can I make a backup of this current shop ROM to go back if something goes wrong or I don't like it?
PaideLis said:
Wow cool.
One last question (I swear): Can I make a backup of this current shop ROM to go back if something goes wrong or I don't like it?
Click to expand...
Click to collapse
You can ask as much as you like =))))
I think you can't because we don't have this "custom ROM" file.
Chinese sellers mod a stock ROM to Android One version, but it is lag and unstable, it's not official ROM, either
Just wanted to add that for me, in the OST v6.0.4 tool, the 'Check System AP Status' update option is selected by default along with 'Normal Download' and seemed to cause the update process to fail. Deselecting it having only 'Normal Download' selected solved it.
I did unlock my nokia 7 and I get the 5 sec delay when its unlocked
Then I Flash the rom C1N-0430-0-00CN-B05.nb0 it does flash but when it tells me finished and does boot its still my old android with dutch language and error com.android.phone I can click on it but its directly back phone is useless now.
Can someone help me ?
After factory reset my phone did boot the stock ROM. I select english and it works ok.
Done several OTA downloads and finished the 10-2018 update no more available.
I wanted to remove some of the stock apps but failed.
Can someone tell me how I can root my Nokia 7 (is there a guide supersu or magisk ?) and how to install TWRP I read something about saving a partition or maybe mistaken. A good guide with steps would be great.
HELP!!
My nokia 7 plus hard bricked, trying to use ost la, so far 40 mins and counting been in download mode, no errors so far.
just there in the reflash service bootloader, is this normal or is there a problem.
Before trying ost my phone wasnt responding,no buttons working or combo and no charging indication..basically no type of boot up
stevenjj28 said:
My nokia 7 plus hard bricked, trying to use ost la, so far 40 mins and counting been in download mode, no errors so far.
just there in the reflash service bootloader, is this normal or is there a problem.
Before trying ost my phone wasnt responding,no buttons working or combo and no charging indication..basically no type of boot up
Click to expand...
Click to collapse
OST 6.1.2 cannot be cracked so it will not work. You should use OST 6.0.4. You will need to have an unlocked bootloader to flash it yourself.
Bootloader unlock
singhnsk said:
OST 6.1.2 cannot be cracked so it will not work. You should use OST 6.0.4. You will need to have an unlocked bootloader to flash it yourself.
Click to expand...
Click to collapse
Have you tried unlocking your bootloader for free? Does anyone in here knows how to unlock it? thank you.
software update
I was be able to unlock bootloader and flash the rom but why the software update is december 2017 patch?
kylemarco03 said:
I was be able to unlock bootloader and flash the rom but why the software update is december 2017 patch?
Click to expand...
Click to collapse
Are you not receiving any updates? Check in settings
Thanks. But why there is no pie update on my nokia 7? others has pie update. Please help
---------- Post added at 03:19 AM ---------- Previous post was at 03:18 AM ----------
singhnsk said:
Are you not receiving any updates? Check in settings
Click to expand...
Click to collapse
Thanks. But why there is no pie update on my nokia 7? others has pie update. Please help
I followed the guide to unlock the bootloader of my Realme 7(RMX2155)
All went smoothly until the end where i had to install the custom recovery
I flashed the vbmeta.img and then i installed the twrp recovery.img
Now after the reboot my device is bootlooping and i cant access the reovery nor the fastboot (bootloader mode)
Pls help
NickkilllerXD said:
I followed the guide to unlock the bootloader of my Realme 7(RMX2155)
All went smoothly until the end where i had to install the custom recovery
I flashed the vbmeta.img and then i installed the twrp recovery.img
Now after the reboot my device is bootlooping and i cant access the reovery nor the fastboot (bootloader mode)
Pls help
Click to expand...
Click to collapse
Turn your device off, and re-flash the stock ROM linked in the guide. You may need to uninstall then reinstall the LibUSB filters, and then run the brom.bat again afterwards. After that, use the latest PBRP. Here:
Realme 6/6i(Indian)/6s | RMX2001 - PitchBlack Recovery Project
PBRP Version: 3.2.0 Maintainer: Firdaus Hakimi
pitchblackrecovery.com
Once you've flashed it, hold Vol- and the power button until the Realme logo shows up. Then release the power button, and continue to hold Vol- until you enter recovery mode. Hope this works out for you.
OrthodoxOxygen said:
Turn your device off, and re-flash the stock ROM linked in the guide. You may need to uninstall then reinstall the LibUSB filters, and then run the brom.bat again afterwards. After that, use the latest PBRP. Here:
Realme 6/6i(Indian)/6s | RMX2001 - PitchBlack Recovery Project
PBRP Version: 3.2.0 Maintainer: Firdaus Hakimi
pitchblackrecovery.com
Once you've flashed it, hold Vol- and the power button until the Realme logo shows up. Then release the power button, and continue to hold Vol- until you enter recovery mode. Hope this works out for you.
Click to expand...
Click to collapse
I have fixed the problem thanks
NickkilllerXD said:
I have fixed the problem thanks
Click to expand...
Click to collapse
I've got the same problem. Mind if you share some tips on how to fix this
hafidhbai said:
I've got the same problem. Mind if you share some tips on how to fix this
Click to expand...
Click to collapse
I waited for the phone to turn off completely by itself an then I flashed the stock ROM using sp flash tool