Related
Hello,
I am relatively new to the forum, so please, forgive me some mistakes . I decided to upgrade my LG g4 H815 to Nougat, rooted it and started in TWRP mode. I followed an youtube step by step guide, so i wiped cache and the system .And...accidentally dropped the phone and it disconnected
I have no android now and have a fresh bricked phone on the loading screen, and more-the phone is not detected by the PC. LGUP with Uppercut gives model unknown , not found by device manager as well. "Adb devices" in the console produces the same result. I can enter download mode, but when the phone is not detected, the stock firmware can't be flashed. The drivers are up to date of course.
Any help or solution will be highly appreciated.
Thank you in advance
Aimanan said:
Hello, I am relatively new to the forum, so please, forgive me some mistakes . I decided to upgrade my LG g4 H815 to Nougat, rooted it and started in TWRP mode...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3166384
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
I also have exact problem no solution till now!!!
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
This u read?
https://www.getdroidtips.com/stock-rom-realme-u1-firmware/
Please reply
I accidentally hard bricked my realme u1 while I am rooting it.
Any solution please reply.
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
Hey man!
It's not a hardbrick, its soft brick.
If you can access recovery then flash a custom recovery, then flash the original boot.img and recovery.img, then reboot to COS recovery flash your ozip and reboot this should fix it!
Hope this helps!
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
DHANOLA said:
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
Click to expand...
Click to collapse
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
[email protected]#$ said:
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
Click to expand...
Click to collapse
You can contact me by mail: [email protected]
DHANOLA said:
You can contact me by mail: [email protected]
Click to expand...
Click to collapse
Hello Everyone!! It has been two years for me to be in this situation. I get mail from many of those who have a similar problem. So I am here, providing the solution to how I solved this solution.
For the solution, you may, first of all, join the given below Telegram. Link from anybody's phone and ask there for your problem or describe your problem in the group someone will help you out. The group icon has been attached.
Just connect to them on telegram and tell your issue they will surely help..
Telegram link
https://t.me/RealmeU1
Or search for Realme U1 group in telegram
Group icon attached
If then also you need help, please contact me by my mail. As mentioned in the above chat reply,
Requesting someone's backup of emmc so I can unbrick my XT2117-4 Retail(Retus) Moto G power 2021. Stuck in Qusb-HS Dloader 9008 mode after setting active slot to b with nothing on slot b in fastboot. If I could atleast somehow swap back to slot_a I feel like that would work but I don't think that's really a possibility in edl. Mainly the GPT also would be helpful. Motorola/borneo_retail/borneo:10/QZBS30.Q4-43-35-2/f8e93:user/test-keys is the build I was on at the time. My phone is hard bricked not soft bricked. There is no fastboot mode only edl mode with Qcom HS-USB 9008. I believe It got bricked by me switching to slot_b in fastboot mode with nothing on slot_b not even bootloader. Also my bootloader is unlocked and it was rooted with magisk at the Time of hard brick. I believe fastboot set_active_slot b was the command that bricked it or what ever the correct usage of the set active command was if that's not exactly it. I just need the emmc_prog_firehose for SM_KAMORTA_H or SDM662 or SM6115. Whatever the proper name out of those it would be I guess for this phones type.
Can't use LSMA since it's hard bricked it doesn't even recognize anything is plugged in. I need a blankflash file to use with qboot or the emmc_programmer and then use QFIL or QPST possibly. I use Linux and Windows both if that helps at all somehow.
More info from a reply of mine.
REPLY:
"No it specifically warned that there was nothing on b and it was dangerous but I wasn't paying much attention to it because I was watching family guy so I told it to go ahead and switch. Insta brick after that decision. It does warn you though or it did with me on my phone. Whenever you've done it your slot probably wasn't really "empty" in the sense it didn't have a bootloader on it. You can't boot up a phone that's on a slot without even a bootloader on it otherwise you'll literally have nothing to load your boot image in the first place which means no recovery or fastboot either for A/B devices hence you then have a hard bricked phone in emergency download mode afterwards that either needs reprogrammed or deep flashed (If there's really a difference I don't know). I think you still need a firehose_emmc_programmer or Blank-flash file which has a programmer in it to do that though which is what I need. Some phones might have different emergency protocols for that situation or maybe it's been updated since to where it prevents A/B phones from getting stuck in limbo on an empty slot but the XT2117-4 Moto G Power 2021 doesn't it just warns or atleast when I bricked mine. It's nice to have the option for developer and testing purposes probably or just as a way to get into EDL Mode. I just wasn't paying as much attention as I should have been while tweaking my phone. I'm not a developer or expert though so someone correct me if I'm mistaken somewhere but I have atleast an alright understanding of what's going on I hope from my experience with rooting/rooted phones. A/B partitioning is still kind of a weird newer thing to me since I haven't done much after bricking my G Power and I was used to System As Root before that."
snuffinaround said:
Requesting someone's backup of emmc so I can unbrick my XT2117-4 Retail(Retus) Moto G power 2021. Stuck in Qusb-HS Dloader 9008 mode after setting active slot to b with nothing on slot b in fastboot. If I could atleast somehow swap back to slot_a I feel like that would work but I don't think that's really a possibility in edl. Mainly the GPT also would be helpful. Motorola/borneo_retail/borneo:10/QZBS30.Q4-43-35-2/f8e93:user/test-keys is the build I was on at the time.
Click to expand...
Click to collapse
Did you by any chance track down anything or solve this? Mine is currently soft bricked also.,,bootloader locked and will only boot to fastboot. any help would be great!
HazyBoneX said:
Did you by any chance track down anything or solve this? Mine is currently soft bricked also.,,bootloader locked and will only boot to fastboot. any help would be great!
Click to expand...
Click to collapse
You already tried LMSA?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
sd_shadow said:
You already tried LMSA?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes every time it says fastboot flash single partition failed
Hello guys. I have this device and I'll help you. Mine's not rooted yet which is why I came to ask a question and accidentally clicked this thread. Tell me what I need to do to get what you need and I'll do it. i don't know how to use a mouse in TWRP and it sounds like that's what you need. I have a wireless mouse with a usb dongle but no type-c otg at the moment. I just found out from another post in here about using twrp from a terminal. I need to learn more about that too. Dude made a kernel backup with an adb twrp command. I asked him about it but have gotten no response.I also only run linux, but may install a windows 11 virtual machine to use LMSA since every lolinet kernel I've rooted so far results in no touch response.
Have you guys tried fastboot flashing the entire lolinet firmware? I just made a tutorial on it. I've never had a problem that wouldn't fix and I have quite a bit of experience....
Fastboot Flash Firmware Commands (borneo)
I made this list because I needed it and didn't see one around here. If anyone can use it, here it is with a link to the firmware. Taylor made for the XT2117 Moto G Power 2021 (borneo). https://mirrors.lolinet.com/firmware/moto/borneo/...
forum.xda-developers.com
I'd bet that would fix it. It re-writes all partitions.
arkansawdave74 said:
Hello guys. I have this device and I'll help you. Mine's not rooted yet which is why I came to ask a question and accidentally clicked this thread. Tell me what I need to do to get what you need and I'll do it. i don't know how to use a mouse in TWRP and it sounds like that's what you need. I have a wireless mouse with a usb dongle but no type-c otg at the moment. I just found out from another post in here about using twrp from a terminal. I need to learn more about that too. Dude made a kernel backup with an adb twrp command. I asked him about it but have gotten no response.I also only run linux, but may install a windows 11 virtual machine to use LMSA since every lolinet kernel I've rooted so far results in no touch response.
Have you guys tried fastboot flashing the entire lolinet firmware? I just made a tutorial on it. I've never had a problem that wouldn't fix and I have quite a bit of experience....
Fastboot Flash Firmware Commands (borneo)
I made this list because I needed it and didn't see one around here. If anyone can use it, here it is with a link to the firmware. Taylor made for the XT2117 Moto G Power 2021 (borneo). https://mirrors.lolinet.com/firmware/moto/borneo/...
forum.xda-developers.com
Click to expand...
Click to collapse
If you If you could pull a total nandroid backup i think that should be what i need to restore my phone if any one could chime in it would be greatly qpp
Yes I have tried that. Check out command line android backup twrp.
HazyBoneX said:
If you If you could pull a total nandroid backup i think that should be what i need to restore my phone if any one could chime in it would be greatly qpp
Click to expand...
Click to collapse
Ok. I have a question as I've never used a mouse with my phone before. Are you guys using a mouse through OTG to use im TWRP? To help you any time soon I'll have to find info for using TWRP with ADB commands as I don't think I have the hardware to use my mouse.
Edit: I found information faster than I thought I would. I looked it up in the past and could find nothing but it's a new feature.
HazyBoneX said:
If you If you could pull a total nandroid backup i think that should be what i need to restore my phone if any one could chime in it would be greatly qpp
Click to expand...
Click to collapse
Okay, that would require me to factory reset because I won't send a backup of my logged in system. I would do that if I thought it would help, but it won't. I don't thiink amyone has beennable to restore a stock nandroid on these auto-encrypting motos. If I''m wrong, and I may be, show me. I've tried many times and many ways. I have been able to restore custom backups, but never stock.
arkansawdave74 said:
Okay, that would require me to factory reset because I won't send a backup of my logged in system. I would do that if I thought it would help, but it won't. I don't thiink amyone has been able to restore a stock nandroid on these auto-encrypting motos. If I''m wrong, and I may be, show me. I've tried many times and many ways.
Click to expand...
Click to collapse
I I'm not really sure I can't get any files to flash on it I can get TWRP to load I can't get the Motorola restore program to flash anything so I'm literally just stuck in fast food with a locked bootloader and non-rooted and no developer options turned on any help would be appreciated
HazyBoneX said:
I I'm not really sure I can't get any files to flash on it I can get TWRP to load I can't get the Motorola restore program to flash anything so I'm literally just stuck in fast food with a locked bootloader and non-rooted and no developer options turned on any help would be appreciated
Click to expand...
Click to collapse
I feel your pain. You have tried the obvious
fastboot set_active a
of course? I'm not trying to be a smartass. You just may have switched slots with twrp and don't know the fastboot command.
arkansawdave74 said:
I feel your pain. You have tried the obvious
fastboot set_active a
of course? I'm not trying to be a smartass. You just may have switched slots with twrp and don't know the fastboot command.
Click to expand...
Click to collapse
Fastboot set_active a retutns....
Setting current slot to 'a'...
FAILED REMOTE FAILURR
HazyBoneX said:
Fastboot set_active a retutns....
Setting current slot to 'a'...
FAILED REMOTE FAILURR
Click to expand...
Click to collapse
Ok. How was it that you switched slots and got stuck? I want to experiment but I don't want to make the same mistake.
Also, if your bootloader is locked, aren't you still under warranty? Can you make a warranty claim?
If not, you may be able to unlock it in your current state which might make fixing it easier. You could try
fastboot oem get_unlock_data
and if it returns some lines of code you can likely unlock it now.
With a locked bootloader you are very limited and my twrp backup of a RETUS would have had no chance at all of helping you unless you happen to have a factory unlocked US variant.
I had it rooted and the bootloader unlocked...then i tried to follow a flash back to stock and re lock boot loader guide....but now when it boots it says no valid os or i can go into fastboot and thats about it....
HazyBoneX said:
I had it rooted and the bootloader unlocked...then i tried to follow a flash back to stock and re lock boot loader guide....but now when it boots it says no valid os or i can go into fastboot and thats about it....
Click to expand...
Click to collapse
Have you tried to unlock it again with the same code? I have never even tried to relock a bootloader. I may have nightmares. If you still have the unlock email I would try that.
arkansawdave74 said:
Have you tried to unlock it again with the same code? I have never even tried to relock a bootloader. I may have nightmares. If you still have the unlock email I would try that.
Click to expand...
Click to collapse
I have tried that also and developer options are not on so i cant
So sorry. If i think of anything else I'll let you know. I think relocking your bootloader with an altered kernel was a bad idea, but I think relocking your bootloader is a bad idea anytime.
My phone is hard bricked not soft bricked. There is no fastboot mode only edl mode with Qcom HS-USB 9008. honestly a mmcblk0 backup would definitely help if anyone would want to backup and then pm me a link or something. I believe It got bricked by me switching to slot_b in fastboot mode with nothing on slot_b not even bootloader. Also my bootloader is unlocked and it was rooted with magisk at the Time of hard brick
snuffinaround said:
Requesting someone's backup of emmc so I can unbrick my XT2117-4 Retail(Retus) Moto G power 2021. Stuck in Qusb-HS Dloader 9008 mode after setting active slot to b with nothing on slot b in fastboot. If I could atleast somehow swap back to slot_a I feel like that would work but I don't think that's really a possibility in edl. Mainly the GPT also would be helpful. Motorola/borneo_retail/borneo:10/QZBS30.Q4-43-35-2/f8e93:user/test-keys is the build I was on at the time.
Click to expand...
Click to collapse
My phone is hard bricked not soft bricked. There is no fastboot mode only edl mode with Qcom HS-USB 9008. honestly a mmcblk0 backup would definitely help if anyone would want to backup and then pm me a link or something. I believe It got bricked by me switching to slot_b in fastboot mode with nothing on slot_b not even bootloader. Also my bootloader is unlocked and it was rooted with magisk at the Time of hard brick
sd_shadow said:
You already tried LMSA?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
LSMA won't work because my phone won't turn on its stuck in emergency download mode and so LSMA doesn't even detect device
So my company sent me a VR headset for development. I tried to update it, but upon doing so, it produced an error and bricked the VR headset. The customer support isn't helping at all, so I'm thinking of just flashing it myself (I'm new to this,).
I tried doing a factory reset, but it only showed me "No command" and reboots again. It has no SD card, and ADB can't recognize the device. The bootloader says it's locked, so I'm pretty sure it's almost impossible for me to crack it. The OS is available on the website, but again, it's almost impossible for me to replace the OS without the SD card and having it recognized by ADB.
If it's not possible to flash it, is there anything interesting I could do with it?
aoaofox said:
So my company sent me a VR headset for development. I tried to update it, but upon doing so, it produced an error and bricked the VR headset. The customer support isn't helping at all, so I'm thinking of just flashing it myself (I'm new to this,).
I tried doing a factory reset, but it only showed me "No command" and reboots again. It has no SD card, and ADB can't recognize the device. The bootloader says it's locked, so I'm pretty sure it's almost impossible for me to crack it. The OS is available on the website, but again, it's almost impossible for me to replace the OS without the SD card and having it recognized by ADB.
If it's not possible to flash it, is there anything interesting I could do with it?
Click to expand...
Click to collapse
Hello and good afternoon, @aoaofox
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
aoaofox said:
So my company sent me a VR headset for development. I tried to update it, but upon doing so, it produced an error and bricked the VR headset. The customer support isn't helping at all, so I'm thinking of just flashing it myself (I'm new to this,).
I tried doing a factory reset, but it only showed me "No command" and reboots again. It has no SD card, and ADB can't recognize the device. The bootloader says it's locked, so I'm pretty sure it's almost impossible for me to crack it. The OS is available on the website, but again, it's almost impossible for me to replace the OS without the SD card and having it recognized by ADB.
If it's not possible to flash it, is there anything interesting I could do with it?
Click to expand...
Click to collapse
when it boots up click power and vol up on the no command screen. then factory data reset and see if it will work . if not. let me know drivers dont exist for this headset for adb sideload updating so ya.
try using a usb c to usb c adaptor try putting the zip on the root of the sd or usb drive if not try making a file and call it dload.
owomushi said:
when it boots up click power and vol up on the no command screen. then factory data reset and see if it will work . if not. let me know drivers dont exist for this headset for adb sideload updating so ya.
Click to expand...
Click to collapse
where i can find adb drivers for Pico Vr neo 3?
leo6990 said:
where i can find adb drivers for Pico Vr neo 3?
Click to expand...
Click to collapse
they really dont exist because of what pico is using they are using old nexus 5 drivers for the pico recovery. and that is terrible. the best thing to do is download and install ubuntu on a spare pc. once its on the spare pc you will need to setup adb there. ince you have adb there you can run the normal adb sideload in recovery.
fyi you have 2 different kinds of headsets this is why it may or maynot fail at recovery.
pico has oem and non oem firmware and lucky we have access to this on the pico 3 website where the downloads are. the pico 3 pro on there is non oem firmware and the pico 3 link is oem firmware.
the best thing to do after this or if you need more help find my you tu be channel and contact me there i hardly check xda
What a crazy few days it's been.
This phone is really locked down hard by vodaphone.
I need to root it in order to install the full NetHunter suite. Some features are not available if the phone is not rooted. ie adding another wifi adapter that supports packet injection and monitor mode.
So my 1st move was Frija, and odin. This nearly bricked my device. Got it restored and went with the magisk route.
This is kind of where I'm stuck. fastboot. I did adb reboot-bootloader and it just sits on this green text that says...
Entering fastboot...
Click to expand...
Click to collapse
Fastboot commands does not work. Obviously.
My 1st mission is to fastboot oem unlock.
So I've read a few devices has fastboot disabled by the providers. ie vodaphone, or even samsung?
I've tried my google foo but found nothing of value for these parameters. note 10 lite, android 12, vodaphone.
What should my next angle be?
craftyza said:
What a crazy few days it's been.
This phone is really locked down hard by vodaphone.
I need to root it in order to install the full NetHunter suite. Some features are not available if the phone is not rooted. ie adding another wifi adapter that supports packet injection and monitor mode.
So my 1st move was Frija, and odin. This nearly bricked my device. Got it restored and went with the magisk route.
This is kind of where I'm stuck. fastboot. I did adb reboot-bootloader and it just sits on this green text that says...
Fastboot commands does not work. Obviously.
My 1st mission is to fastboot oem unlock.
So I've read a few devices has fastboot disabled by the providers. ie vodaphone, or even samsung?
I've tried my google foo but found nothing of value for these parameters. note 10 lite, android 12, vodaphone.
What should my next angle be?
Click to expand...
Click to collapse
Hello and good afternoon, @craftyza
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Solved the fastboot portion. But it would seem this phone is unrootable.
Bootloader is unlocked.
But no TWRP available:
Twrp For Note 10 lite
any updates ? :rolleyes:
forum.xda-developers.com
Hello, I have successfully rooted a Samsung tablet without TWRP. After unlocking the bootloader, you need to use Frija to download the firmware file, and then you need to extract it. After that, you can send the AP partition file to your phone over adb, patch it in the Magisk app, and pull it back to your computer. From there you need to flash it in Odin, and do a factory reset from recovery mode. (When downloading the firmware file choose the correct model, software version, and CSC.) I can send a short video proof of the rooted tablet later when I get home from school)
$cronos_ said:
Hello, I have successfully rooted a Samsung tablet without TWRP. After unlocking the bootloader, you need to use Frija to download the firmware file, and then you need to extract it. After that, you can send the AP partition file to your phone over adb, patch it in the Magisk app, and pull it back to your computer. From there you need to flash it in Odin, and do a factory reset from recovery mode. (When downloading the firmware file choose the correct model, software version, and CSC.) I can send a short video proof of the rooted tablet later when I get home from school)
Click to expand...
Click to collapse
Thanks. Will go down that path again. Last time I did that, I semi bricked the phone. but bootloader was locked, so it came up with an error that vender disabled custom roms
And here we go again. How do I recover from this blue screen?
Followed this Guide
How to Root Samsung Galaxy Note 10 on Android 12?
In this article you will find the step-by-step guide on How to Root Samsung Galaxy Note 10 on One UI 4.0 based on Android 12?
krispitech.com
craftyza said:
And here we go again. How do I recover from this blue screen?
Followed this Guide
How to Root Samsung Galaxy Note 10 on Android 12?
In this article you will find the step-by-step guide on How to Root Samsung Galaxy Note 10 on One UI 4.0 based on Android 12?
krispitech.com
Click to expand...
Click to collapse
try putting it in download mode and flashing stock, if it does not work then use edl and qfil
here is tablet https://a.pomf.cat/rlynth.mp4 https://a.pomf.cat/bivwso.jpg
$cronos_ said:
try putting it in download mode and flashing stock, if it does not work then use edl and qfil
here is tablet https://a.pomf.cat/rlynth.mp4 https://a.pomf.cat/bivwso.jpg
Click to expand...
Click to collapse
Can you possibly point me to a writeup for edl and qfil?
craftyza said:
Can you possibly point me to a writeup for edl and qfil?
Click to expand...
Click to collapse
So what you need to do is:
Install some drivers
Build an edl cable with an old USB cable to force it into edl without test point
And then download stock firmware and flash it in qfil
$cronos_ said:
So what you need to do is:
Install some drivers
Build an edl cable with an old USB cable to force it into edl without test point
And then download stock firmware and flash it in qfil
Click to expand...
Click to collapse
Would you be able to help me locate the stock rom? I have this gut feel this is why I'm bricking it all the time. Maybe Frija is grabbing the wrong image. Then when magisk patch it, the core is wrong, then it goes haywire
craftyza said:
Would you be able to help me locate the stock rom? I have this gut feel this is why I'm bricking it all the time. Maybe Frija is grabbing the wrong image. Then when magisk patch it, the core is wrong, then it goes haywire
Click to expand...
Click to collapse
Can you show me a picture of the sticker on the side of the box where it says "SW VER"
$cronos_ said:
Can you show me a picture of the sticker on the side of the box where it says "SW VER"
Click to expand...
Click to collapse
The only sticker on the box.
We can close this thread. I've come to the conclusion that the Note 10 Lite is a terrible platform to try and root. Virtually zero roms out there. Bricked it 3 times already.
Going to sell it, and try and get my hands on something like an old netbook