OnePlus Nord CE 2 Lite 5G Diagnostic Mode (DIAG Mode) - Android Q&A, Help & Troubleshooting

Hi all,
I am trying to enable Diagnostic Mode on my OnePlus in order to use apps like SnoopSnitch or QCSuper.
I tried different codes but they don't seem to work with the Google dialer.
I tried manually installing OnePlus Diagnostic via APK but it returns error due to conflict with existing packages.
Any idea? Thanks!

softdiam said:
Hi all,
I am trying to enable Diagnostic Mode on my OnePlus in order to use apps like SnoopSnitch or QCSuper.
I tried different codes but they don't seem to work with the Google dialer.
I tried manually installing OnePlus Diagnostic via APK but it returns error due to conflict with existing packages.
Any idea? Thanks!
Click to expand...
Click to collapse
Hello and good afternoon, @softdiam
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator

Related

change the ROM on a little known phone

Hi I have a problem with changing the rom on my phone, I have a little known device called Geotel Note and the fact that it is an unknown phone makes sure that when I go to install a custom rom and I have to select my device in the list does not appear, is there any way to make the custom rom compatible with the device?
greensciuto64 said:
Hi I have a problem with changing the rom on my phone, I have a little known device called Geotel Note and the fact that it is an unknown phone makes sure that when I go to install a custom rom and I have to select my device in the list does not appear, is there any way to make the custom rom compatible with the device?
Click to expand...
Click to collapse
@greensciuto64
Welcome to XDA. I hope you'll always get the support you require.
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
I've moved the thread to Android Q&A.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

Umidigi A11

Can someone please teach me how to install TWRP on the Umidigi A11
Fa_bro29 said:
Can someone please teach me how to install TWRP on the Umidigi A11
Click to expand...
Click to collapse
Hello and good morning, @Fa_bro29
Welcome to XDA. I hope you'll always find and get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Hello, can some one tell me how to fix this issue...
The camera is not working, and even the icon on the "desktop" disapeared; and when trying to use any other app with camera, sends mesajes like "cant connect to the camera" or "camera is not working, restart device".
I have restart several times, and has no effect. I have erase data cache, and has no effect.

Is it possible...

Hi folks, this forum is really different to when I last visited so I am not sure where to post this...
I have the DJI RC Pro, screened remote control that's running a very slim Android 10.
The RC does not have Google services installed so I'm sure you can understand the issues that this leads to.
I am not even sure how one would even go about rooting the RC but ideally I would like Google services added, any advice please?
bashy said:
Hi folks, this forum is really different to when I last visited so I am not sure where to post this...
I have the DJI RC Pro, screened remote control that's running a very slim Android 10.
The RC does not have Google services installed so I'm sure you can understand the issues that this leads to.
I am not even sure how one would even go about rooting the RC but ideally I would like Google services added, any advice please?
Click to expand...
Click to collapse
Hello and good morning, @bashy
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Hello and good morning, @bashy
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
My apologies, I am on my phone, whilst it's not much of an excuse, I will try to post when in the laptop so I can check things 1st, again, my apologies.
I don't know anything about the device but if your main goal for right now is simply services, maybe you can look into "microG" to get the services, or there is an option called the "aurora store" both of which you can download on your android device without having to setup adb or fastboot.
MicroG's Website
I wrote some knowledge on aurora here
if you have adb and fastboot access that opens you to being able to just flash gapps normally but idk your situation

Help for upgrading from android 2.3.6 to 4.0

I have a tablet called general mobile e-tab 1, I want to make it 4.0, but I could not enter fastboot with either key combinations or adb, recoverye cannot be entered with key combinations, only when I enter from adb with the adb reboot recovery command, the device resets itself directly, what can I do?
note: you registered to the forum 5 minutes ago, I don't know how to use and categories, sorry if I'm wrong
Enter the exact model name from the system information about the tablet.
ze7zez said:
Enter the exact model name from the system information about the tablet.
Click to expand...
Click to collapse
Unfortunately, the exact model of the device is e-tab 1, there is no information on the internet, I could only find a few resources in Turkish, even there is no rom, so I will install the rom of the tabs named pipo t9s, which uses the same motherboard
Info for another model should also clarify how to flash.
ze7zez said:
Info for another model should also clarify how to flash.
Click to expand...
Click to collapse
Unfortunately, the device does not start like this. Is there a solution other than adb and key combinations?
You can add inserting the power/usb plug while pressing the keys in various combinations.
It may also be that the bootloader does not allow for a different mode of operation.
borakok said:
I have a tablet called general mobile e-tab 1, I want to make it 4.0, but I could not enter fastboot with either key combinations or adb, recoverye cannot be entered with key combinations, only when I enter from adb with the adb reboot recovery command, the device resets itself directly, what can I do?
note: you registered to the forum 5 minutes ago, I don't know how to use and categories, sorry if I'm wrong
Click to expand...
Click to collapse
Hello and good afternoon, @borakok
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Hello and good afternoon, @borakok
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
thanks

[QUESTION] How to flash GSI on Hard-Bricked Nokia T20 WiFi? (TA-1392)

Hello,
I recently tried to find a workaround for installing an Android 13 GSI for my Nokia T20 tablet (TA-1392). It unfortunately backfired and now I don't know how to install the new GSI for my tablet without an unlocked bootloader. If possible, how can I unlock the bootloader? If not, is there a workaround?
This is an absolute emergency because I do not know if I bricked my tablet by trying to install a new GSI.
SaturaniumYT said:
Hello,
I recently tried to find a workaround for installing an Android 13 GSI for my Nokia T20 tablet (TA-1392). It unfortunately backfired and now I don't know how to install the new GSI for my tablet without an unlocked bootloader. If possible, how can I unlock the bootloader? If not, is there a workaround?
This is an absolute emergency because I do not know if I bricked my tablet by trying to install a new GSI.
Click to expand...
Click to collapse
Hello and good morning, @SaturaniumYT
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Hello and good morning, @SaturaniumYT
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
Thank you for the heads up, I'm sorry that I'm unable to properly navigate your site in order to post in the correct places. It's been dizzyingly confusing. No offense intended.
SaturaniumYT said:
Thank you for the heads up, I'm sorry that I'm unable to properly navigate your site in order to post in the correct places. It's been dizzyingly confusing. No offense intended.
Click to expand...
Click to collapse
I certainly believe you. A forum with 11+ million members, 3.5+ million threads incorporating 75+ million posts in ??? (I've never tried to count them) fora is certainly not easy to organise to everybody's satisfaction. For this reason, some staff guidances and announcements are stuck at the top of every forum that might be helpful - if read!
Have you already had a look at this great guide by our RC @sd_shadow?
[Index] XDA 2021: How to Navigate the New Site Layout
XDA 2021 [INDEX] Helpful Information Welcome, this thread has been created to encompass everything you may need to navigate the new site layout. Please only post in this thread with feedback on how to improve this document. Do not post "Thank...
forum.xda-developers.com
Regards
Oswald Boelcke
To whom this may concern,
As of today, 5/14/2023, I have updated the title of the thread to try to get better insight on my problem.
This is no longer an emergency.
As for today, I have discovered that my tablet was hard-bricked when I clean-erased it back in April 2023. However, with some deeper research, I found that it is recoverable. In terms of how, since the tablet tends to, when turned on, intermittently get detected by my Windows 11 desktop as 2 different identities, I need to somehow install/flash something onto the tablet within that split-second of identification to keep it from turning off while flashing the GSI. OR: have a tool that is not the HMD DeviceKit, as I cannot get permission for my Microsoft account to access such an app. I have no fastboot or recovery mode, as that was erased when the tablet was bricked.
NOTE: The GSI that I have installed is a stable version of Android 13. It has not yet been flashed onto the tablet as of the time this post was published.
Hello Again,
I have done more research and found out that I need to put my tablet into EDL Mode. In terms of how to do so, I do not yet know. In this later research that I made over the past 24 hours, a hint points me to the internal pinout of my tablet. Can someone help me identify the pins that I need to short out to enter EDL mode if possible? Or, if this hint is not true for this device (Nokia TA-1392), can someone point out how else to enter EDL mode on my tablet? Please note that the info about the GSI that I posted yesterday is still valid.

Categories

Resources