Samsung a21s fail odin and vbmeta - Samsung Galaxy A21s Questions & Answers

I have a problem: when flashing a vbmeta, odin stays in file analysis and when flashing another it fails, do you know where I can get a working vbmeta or another version of odin to use? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Tengo un problema:al flashear un vbmeta odin se queda en file analysis y al flashear otra me da fail, saben dónde puedo conseguir un vbmeta que funcione u otra version de odin a usar?

Related

[Q] E10a se queda con el logo SonyEricsson luego de actualizar con ROM MiniCM7-2.2.1

Hi, i was installing a custom rom following this thread: http://forum.xda-developers.com/showthread.php?t=1068553 but y forget make a wipe and now the phone only show the logo, i have used, the original 'Sony PC Companion' but not detect the phone
The flashTool stop working whit this log
29/059/2012 17:59:47 - INFO - Device connected in flash mode
29/059/2012 17:59:48 - INFO - Selected X10a_2.1update1_r2.1.A.0.435_Generic.ftf
29/059/2012 17:59:48 - INFO - Preparing files for flashing
29/059/2012 17:59:49 - INFO - Please connect your device into flashmode.
29/059/2012 17:59:50 - INFO - Opening device for R/W
29/059/2012 17:59:50 - INFO - Reading device information
29/059/2012 17:59:50 - INFO - Start Flashing
29/059/2012 17:59:50 - INFO - Flashing loader
29/059/2012 17:59:50 - INFO - Ending flash session
29/059/2012 17:59:50 - ERROR -
29/059/2012 17:59:50 - ERROR - Error flashing. Aborted​
If someOne can help me.... I know the problem is the wipe
First of all, this should be in Q&A section
I don't think your problem is the wipe
Steps:
1- unlock bootloader
2- flash kernel with flashtool
3- flash rom and googleapps through clockworkmod recovery
Did you do all of this?
Primero q nada, esto debería ir en la sección de preguntas y respuestas (Q&A) No creo q tu problema sea lo del wipe, checa los pasos de arriba, seguro q hiciste todo bien?
Sorry
thegearhead said:
First of all, this should be in Q&A section
I don't think your problem is the wipe
Steps:
1- unlock bootloader
2- flash kernel with flashtool
3- flash rom and googleapps through clockworkmod recovery
Did you do all of this?
Primero q nada, esto debería ir en la sección de preguntas y respuestas (Q&A) No creo q tu problema sea lo del wipe, checa los pasos de arriba, seguro q hiciste todo bien?
Click to expand...
Click to collapse
I sorry, i can not unlock the bootloader, every blog that I have readed make this with the phone working if you can help me thank
First of all, READ! very well before doing anything, that's your biggest mistake
Then, download SEUS, open it and select ''repair'', your phone will get back to stock, once you do that let me know
Primero q nada, LEE! antes de hacer nada, ese fue tu más grande error, por eso tu celular no funciona
Entonces, ve a la página de sony ericsson y busca el programa llamado SEUS, bajalo y abrelo, presiona el botón q dice "reparar" y conecta tu teléfono como ahí te lo dice, esto debe dejarlo funcionando de nuevo, entonces me avisas y te explico todo lo demás ok?
Ready
thegearhead said:
First of all, READ! very well before doing anything, that's your biggest mistake
Then, download SEUS, open it and select ''repair'', your phone will get back to stock, once you do that let me know
Primero q nada, LEE! antes de hacer nada, ese fue tu más grande error, por eso tu celular no funciona
Entonces, ve a la página de sony ericsson y busca el programa llamado SEUS, bajalo y abrelo, presiona el botón q dice "reparar" y conecta tu teléfono como ahí te lo dice, esto debe dejarlo funcionando de nuevo, entonces me avisas y te explico todo lo demás ok?
Click to expand...
Click to collapse
Ready, some time ago I used this post 'http://forum.xda-developers.com/showthread.php?t=1200675' and after install I could make the wipe without problems but the phone work very slow
I tried some times do this but it never worked, reading I found the solution , the problem was the kernel, I use the miniCM9 and in this post them talk about the kernel and instaling this the rom work perfect
To install the kernel:
http://forum.xda-developers.com/showthread.php?p=25550442
To install the rom ti ICS:
http://forum.xda-developers.com/showpost.php?p=25532205&postcount=1
XDA is great.
Thank for all

Videotutorial BMM in Spanish

I think that are many people who talks spanish, so i've made a how-to in spanish using the BBM
- Installing from PlayStore
- Installing the recovery
- Make backups
- Installing custom rom and gApps
- Uninstalling recovery and BMM
-----
Imagino que hay muchas personas que hablan español, entonces se me ocurrió hacer un videotutorial usando BBM
- Instalación desde Play Store
- Instalación del recovery
- Crear backup
- Instalar Custom rom y Gapps
- Desinstalación del recovery, más el BMM
http://www.youtube.com/watch?v=EOAoW0ggaDM

[ROM] [UNO] [P76x] [JB] [PORT] Baidu OS

Before flagging me as SPAM or something like that, please check that this post isn't dead, I'm just working hard on trying to get it booting. Stay tuned . If you ever need more information, please check the "Editing reason".
If you want to see the spanish version please check at the bottom of the post. // Si quieres ver la version en español, por favor mira al final del post.
Hi guys, I'm now here to show my first ROM port and my first touch on Android development.
Code:
[COLOR="red"]* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*[/COLOR]
Features: (the ones that must work, taking in mind the working features on the base ROM)
- WiFi
- LCD
- Graphics card
- Bluetooth
- External memory
Working:
- Installer
- Flashing and formatting partitions
- Getting to the bootloader (LG Logo), passing it and start to show the bootanimation.
Currently NOT working:
- Complete the first boot
To do:
- Get it to boot
- Make the installer nicer and sync it with TWRP's progress bar.
Download links:​
ROM: Will be available in some hours.
Model-based fixes: p768, for the rest of the models, it should work without any trouble.
Code:
Credits:
- To @artit for the [URL="http://d-h.st/T63"]camera fix for p768[/URL] available above.
- To the CyanogenMod Team for their official and clean CM ROM. (for more info check [url]http://get.cm/?device=p760[/url] at [B]2013-07-12 09:45:40[/B] as build date).
- [STRIKE]To @mateo1111 for the [URL="http://forum.xda-developers.com/showthread.php?t=2405724"]base ROM[/URL].[/STRIKE]
- [STRIKE]To @Rohan Taneja for the [URL="http://forum.xda-developers.com/showthread.php?t=2436035"]ported ROM[/URL] (which might need to be changed, because it feels not compatible with the base ROM, I'll give more news later).[/STRIKE] ([I][COLOR="Gray"]unable to get it to boot, trying with another PORT[/COLOR][/I])
- To @vvaibhavv for the [URL="http://forum.xda-developers.com/galaxy-core/development/rom-baidu-os-samsung-galaxy-core-duos-t2999293"]ported ROM[/URL].
- To @rishabh.raj37 for his nicely [URL="http://forum.xda-developers.com/showthread.php?t=1908008"]simple ROM porting tutorial[/URL].
Speaking spanish? // ¿Hablando español?
Hola chicos, estoy aqui para mostrarles mi primera ROM portada y mi primer toque en relacion con el desarrollo en Android.
Code:
[COLOR="red"]* Include <std_disclaimer.h>
* Tu garantia esta ahora vulnerada.
* No me hago responsable por dispositivos brickeados, tarjetas SD muertas,
* guerras termonucleares, o tu enojandote porque la aplicacion de Alarma fallo. ¡Por favor
* investiga un poco si tienes alguna duda acerca de las caracteristicas de esta ROM
* antes de flashearla! TU eliges hacer estas modificaciones, y si
* me culpas por haber danado tu dispositivo, me reire de ti.
*[/COLOR]
Caracteristicas: (las que deben funcionar, teniendo en cuenta las que funcionan en la ROM base).
- WiFi
- LCD
- Tarjeta grafica
- Bluetooth
- Memoria externa
Funcionando:
- Instalador
- Flashear y formatear las particiones
- Entrada al cargador de arranque, pasarlo y entrar a la animacion de inicio de la ROM portada
Actualmente NO funcionando:
- Completar el primer inicio
A do:
- Hacer que arranque
- Lograr que el instalador se vea mas bello y sea sincronico a la barra de progreso del recovery TWRP
Links de descarga:​
ROM: Estara disponible en unas horas.
Correciones segun el modelo: p768, para el resto de los modelos, deberia funcionar sin ningun problema.
Code:
Creditos:
- A @artit por la [URL="http://d-h.st/T63"]correcion de camara para p768[/URL] disponible arriba.
- Al equipo de CyanogenMod por su ROM oficial y limpia. (para mas informacion por favor visita [url]http://get.cm/?device=p760[/url] en [B]2013-07-12 09:45:40[/B] como fecha de compilacion).
- [STRIKE]A @mateo1111 por la [URL="http://forum.xda-developers.com/showthread.php?t=2405724"]ROM base[/URL].[/STRIKE]
- [STRIKE]A @Rohan Taneja por la [URL="http://forum.xda-developers.com/showthread.php?t=2436035"]ROM portada[/URL] (la cual puede necesitar ser cambiada, porque parece incompatible).[/STRIKE] ([I][COLOR="Gray"]imposible hacerla arrancar, intentando PORTAR desde otra ROM[/COLOR][/I])
- A @vvaibhavv por la [URL="http://forum.xda-developers.com/galaxy-core/development/rom-baidu-os-samsung-galaxy-core-duos-t2999293"]ROM portada[/URL].
- A @rishabh.raj37 por su hermosamente [URL="http://forum.xda-developers.com/showthread.php?t=1908008"]simple tutorial para portar ROMs[/URL].
Delayed development.
PS: MOD, if you want, delete this, I'm not sure if I'll be able to continue testing.
Changelogs
04/03/16: Just bootanimation, changed updater-script parameters to fulfill permission requirements.
06/03/16: Not booting, seems to be a deadboot case. Booted to recovery and re-flashed last working ROM.
07/03/16: Switched base ROM from mateo1111's ROM to CM Team's one. Still trying to get it to boot. As a side note, it seems like SELinux is getting it to not-boot as a side-effect of the system files being constantly changed from the first build, will now try without SELinux.
Hi, it could be intresting. Good work
satiryco said:
Hi, it could be intresting. Good work
Click to expand...
Click to collapse
Thanks, I'll be still trying in a while.
Hei any news?
Which android version is this ROM? You better get it working soon because XDA doesn't like placeholder threads.
EdwinMoq said:
Which android version is this ROM? You better get it working soon because XDA doesn't like placeholder threads.
Click to expand...
Click to collapse
I know that, anyways, I'm still trying to get it to boot. Any hints will be appreciated, if you like, I can upload it just as an ALPHA flashable .zip.
It makes use of Android 4.2.2 Jelly Bean - No SELinux.
facuarmo said:
I know that, anyways, I'm still trying to get it to boot. Any hints will be appreciated, if you like, I can upload it just as an ALPHA flashable .zip.
It makes use of Android 4.2.2 Jelly Bean - No SELinux.
Click to expand...
Click to collapse
The first thing you should do is get logs. While bootlooping connect the phone to the PC and if you are lucky the adb service have already loaded and you can get logcats.
EdwinMoq said:
The first thing you should do is get logs. While bootlooping connect the phone to the PC and if you are lucky the adb service have already loaded and you can get logcats.
Click to expand...
Click to collapse
It's been loaded, anyways, thanks to the base ROM being 4.3.x it's been using ADB secure. Disabling it on build.prop will make it to boot to a blank screen. Such a strange issue.
Switching to an older base ROM (CM 10.1 ) will also get to a blank screen and no drivers loaded.
Any hints?

Limonade Rom SM-G570M[J5 Prime] [7.0] [BETA]DELETED

Deleted
Gracias
Gracias señor Tutti. Sos grande. :good:
Gracias William, cuando sale la oficial?
Enviado desde mi SM-G570M mediante Tapatalk
Logre instalarlo sin problemas, y estuve probando y parece muy estable, peero, al momento de intentar entrar al recovery me saltó un mensaje " only official released binaries are allowed......", ahora al momento de encender el móvil me salta el mensaje y no bootea, no entra al recovery porque salta el mismo mensaje, solo a modo download.
Para poder usar el móvil tuve que instalar por ODIN la version 7.0 de TTT pero ahora tengo el "RMM STATE: Prenormal" nuevamente y no puedo instalar el recovery.
PD: Gracias por la Rom
Install it without problems, and I was trying and it seems very stable, but, when trying to enter the recovery jumped a message "only official released binaries are allowed ......", now when I turn on the mobile jump the message and does not boot, does not enter the recovery because it jumps the same message, only to download mode.
To use the mobile I had to install the TTT version 7.0 through ODIN but now I have the "RMM STATE: Prenormal" again and I can not install the recovery.
PD: Thanks for the Rom.
How to install TWRP in 7.0?
Cool! looks great with simplistic features.
Can you port this rom for Galaxy J5 510FN..?
Para que versiones del j5 2016 es compatible la rom?
Suuzuaw said:
Para que versiones del j5 2016 es compatible la rom?
Click to expand...
Click to collapse
supongo que leer el título responde tu pregunta
I need to support J5 prime G570y for this help the doctor help
Gracias Hermano por tu arduo trabajo sigue asi.. exitos!!:good::good:
tutibreaker said:
Hello guys i bring to you the first nougat based rom for SM-G570M variant; let start !!
Changelog 1.0B:
added floating windows
optimized kernel
better battery life
performace x2
system apps updated from oreo
csc features enabled
video player with gesture search
Grx touchwiz
added init.d scripts
added Spowerplannig
directional unlock
email app changed to samsung focus
smartcaller enabled by default
splashscreen from apps enabled
added performance mode
removed DVFS
added UHQ audio optimizer
edge lightning in music player
a lot more
Bug are spected, please report them
Screenshots:
Screenshots
DOWNLOAD:
Link removed due some critical issues reported by users, will be reuploaded when is bug free, sorry for that
How to install TWRP and the ROM:
1) install the Unlocked bootloader trough odin
2) after install the BL enter in download mode and install TWRP for 7.0
3)then enter recovery mode and format data partition
4) enter in advance wipe and wipe dalvik, system,data,internal storage and cache
5) flash the rom
6) enjoy!!
File for Unlock bootloader:
Unlocked bootloader
TWRP 7.0
ROM OS Version: 7.0.x Nougat
ROM Kernel: Linux 3.18.14
ROM Firmware Required: Stock Nougat Android 7.0
Status: Beta
Created 30-11-2017
Last Updated 30-11-2017
Hit thanks if you like my work
Click to expand...
Click to collapse
The Unlocked bootloader is apparently causing the phone to randomly reboot
Thread closed at OPs request

Moto g6 plus soak update, android 9

Hola a Todos, Este es el proceso de actualización a Android Pie (Soak Test)​
Esto no sería posible sin el apoyo y colaboración de los miembros del grupo "evert "​
"Entre todos podemos hacer las cosas posibles"​
Primero que nada, debemos tener el Bootloader Desbloqueado lo cual pueden conseguir desde cualquiera de estos dos Post
Unlock Bootloader (English & Español)
Preparing-to-unlock-bootloader-t3854240
Luego bajar la Rom Stock con la compilación: OPWS27.113-89-2
Descargar
Seguido de esto bajar los archivos Ota´s
Descargar
No nos olvidemos de los archivos ADB y Los Drivers de Motorola
Hilo: Minimal ADB and Fastboot
ADB Descarga Directa
Drivers
Y de paso los BootLogos
Instalador Automatico BootLogo (Blanco y Negro)
Una vez con todos los archivos ya descargados, procedemos a meterlos a una sola carpeta, para así utilizarlos mas rápidamente.
Descomprimir La ROM 89-2, y adb en una sola carpeta
Ejecutar el Archivo " flash rom.bat
Conectar el Teléfono en modo fastboot y esperar
Saltamos toda la configuración sin permitirle conectarse a Internet
Descomprimimos el zip con las otas y pasamos el archivo mas grande 27.----- a la memoria del teléfono
Nos vamos a permisos de Apps -> Almacenamiento -> Mostrar Sistema -> Activamos, desactivamos y activamos "Actualización de Motorola"
Nos debería aparecer el menú de actualización, si no es así vamos a actualizaciones y aparecerá
Dejamos que se instale y reiniciamos
Ahora ponemos los demás archivos en la memoria interna y automáticamente las actualizaciones serán detectadas, las instalamos y ya.
Después de Instalar todas las actualizaciones, hacemos un hard reset.
Si queremos quitar el anuncio de Bootloader, descomprimimos el zip con los Logos y elegimos el blanco o negro y ejecutamos el ".bat" correspondiente (Importante no usarlo antes o dará error en el proceso de actualizaciones)
Root:
Lo conseguimos con Magisk
Pasamos el zip a la memoria externa (la interna esta encriptada) y ponemos el teléfono en modo fastboot
Descargamos el Recovery y lo ejecutamos
Download TWRP ejecutable
Instalamos el Zip y reiniciamos, en dado caso que presente errores o no aparezca repetimos el paso anterior.
English
Hi Everyone, This is the update process to Android Pie (Soak Test) ​
[FONT= "Century Gothic"] This would not be possible without the support and collaboration of the members of the "evert" group [/FONT]​
"We can do all things together" ​
First of all, we must have the Unlocked Bootloader which can be obtained from any of these two Post
Unlock Bootloader (English & Español)
Preparing-to-unlock-bootloader-t3854240
Then download the Stock Rom with the compilation: OPWS27.113-89-2
Download
Download the Ota's files
Download
Let's not forget the ADB files and Motorola Drivers
Thread: Minimal ADB and Fastboot
ADB Direct Download
Drivers
And of course the BootLogos
BootLogo Automatic Installer (Black and White)
Once with all the files already downloaded, we proceed to put them into a single folder, so they can be used more quickly.
Unzip ROM 89-2, and adb in a single folder
Run the File " flash rom.bat
Connect the phone in fastboot mode and wait
We skipped all the configuration without allowing you to connect to the Internet
Unzip the zip with the otes and pass the largest file 27 .----- to the phone's memory
We go to Apps permissions -> Storage -> Show System -> Activate, deactivate and activate "Motorola Update"
We should see the update menu, if not, let's go to updates and it will appear
We let it install and restart
Now we put the other files in the internal memory and automatically the updates will be detected, installed and now.
After installing all the updates, we do a hard reset.
If we want to remove the announcement from Bootloader, unzip the zip with the Logos and choose the white or black and execute the corresponding ".bat" (Important not to use it before or give an error in the update process)
Root:
We got it with Magisk
We pass the zip to the external memory (the internal one is encrypted) and we put the phone in fastboot mode
Download the Recovery and execute it
Download TWRP executable
We install the Zip and reboot, in case it presents errors or does not appear we repeat the previous step.
OTA files need permission to download
AparecidoFaro said:
OTA files need permission to download
Click to expand...
Click to collapse
I'm uploading the file again, but it might take a while
Miiiis said:
I'm uploading the file again, but it might take a while
Click to expand...
Click to collapse
Can not you just put the file as public?
AparecidoFaro said:
Can not you just put the file as public?
Click to expand...
Click to collapse
The link is not mine, I can not change it
give me two hours and the link will be updated
Miiiis said:
The link is not mine, I can not change it
give me two hours and the link will be updated
Click to expand...
Click to collapse
Got it. All right then, no problem.
Guys, it looks like the stable update has been released in India
https://support.motorola.com/in/en/solution/MS136260
OTA links are not working...
ColaDeveloper said:
OTA links are not working...
Click to expand...
Click to collapse
new links
Thank you. I'm downloading and I will test it. I hope it will work.
I put a massive warning out here for anyone that's going to install this. First of all, with the public version rollout probably very soon, you should ask if it's worth it to install the soak because you have to go back to stock oreo for the official pie ota.
But aside from that, i'm putting a warning here as there have been people bricking their device with the soak.
Obviously, bricking is always a risk factor when your flashing things but i don't know if there will eventually be a fix for those that end up bricked. Do with your device whatever you want but keep this in mind. Yes you get stock pie with soak, but consider if the risk taken is worth the gain.
Miiiis said:
new links
Click to expand...
Click to collapse
Can't seem to open the rar file in the new link. Anyone else having this problem?
The OTA link does not work
The update for Moto G6 plus is started to rolling out buth good take wail before its on youre phone avalbe..
https://www.talkandroid.com/335911-moto-g6-android-pie/
Boot logo fails
Awesome! I flashed this on my Moto G6 plus and it worked, took 30 minutes while all the updates where installing.
I've got this message while running Bootlogo Moto G6 Plus White-Black in fastboot:
Code:
C:\G6+\platform-tools_r28.0.1-windows\platform-tools\roms\stock\Pie\Bootlogo Moto G6 Plus White-Black\Bootlogo Moto G6 Plus>White.bat
C:\G6+\platform-tools_r28.0.1-windows\platform-tools\roms\stock\Pie\Bootlogo Moto G6 Plus White-Black\Bootlogo Moto G6 Plus>fastboot flash logo logo_white.bin
(bootloader) partition-typ: not found
(bootloader) max-download-sizego: not found
target didn't report max-download-size
sending 'logo' (2071 KB)...
(bootloader) Requested download size is more than max allowed
FAILED (remote failure)
finished. total time: 0.007s
Also every time I boot the phone it sends a message in yellow saying: "Verity mode is set to disabled"
Thank you for your work!
Google phone work? Direct from the play store?
angelpradomx said:
Awesome! I flashed this on my Moto G6 plus and it worked, took 30 minutes while all the updates where installing.
I've got this message while running Bootlogo Moto G6 Plus White-Black in fastboot:
Also every time I boot the phone it sends a message in yellow saying: "Verity mode is set to disabled"
Thank you for your work!
Click to expand...
Click to collapse
Hello, what firmware version were you on? I'm on 89-5 and I'm not sure if downgrading to 89-2 can cause bricks

Categories

Resources