Related
Facebook patched with messenger inside from this thread http://forum.xda-developers.com/android/apps-games/app-facebook-apk-patcher-to-enable-t3366080
Thanks to @lorantm
You're welcome.
Don't forget that the variant you've uploaded is built for ARM devices running Android 5.0+.
I'd recommend for everyone to visit the patcher's official thread where you can find the latest version of the patcher, important notes and even a link to patched apk's uploaded by @wolfballz.
PS: Installation is slow on 5.0+ variants only (in case of the original apk too) because code within 10+ dex files is being optimized and put into an oat file. 4.0+ variants install really fast.
lorantm said:
You're welcome.
Don't forget that the variant you've uploaded is built for ARM devices running Android 5.0+.
I'd recommend for everyone to visit the patcher's official thread where you can find the latest version of the patcher, important notes and even a link to patched apk's uploaded by @wolfballz.
PS: Installation is slow on 5.0+ variants only (in case of the original apk too) because code within 10+ dex files is being optimized and put into an oat file. 4.0+ variants install really fast.
Click to expand...
Click to collapse
Thank you for great work :good:
I have android 6.0.1 , CM13. Thinking to try 4.0+ variants to see how will work
Boki11111 said:
Thank you for great work :good:
I have android 6.0.1 , CM13. Thinking to try 4.0+ variants to see how will work
Click to expand...
Click to collapse
Use 5.0+ variants. They install slower though, but they're faster and smoother during usage because of install-time code optimization.
First post updated to better version with latest patch (V2.9) by @lorantm
Any one test this rom https://www.androidfilehost.com/?fid=385035244224410391 ?
changelog??
It's legit and runs fine. I've used the other three updates of this rom by the same Dev PSSGCSim. If you check the wip thread for lineage in the forum dedicated to lineage you can scroll down and see an unofficial build link that will show all unofficial builds for all devices that have one already all ROMs from that link are legit and if you found this one (which I did see it there this morning) then it's legit and seeing the devs name more frequently there is more assurance that it's safe. That page it's just were third party unofficial builds that are not made by the lineage team are going cause they are still working on their new site and trying to get builds official. They released the source to open public so anyone can make their own build. so far everyone I've seen for onyx is perfectly safe to flash. All ROMs by this dev do require custom kernel to bout though I use arsenic kernel. You can find it here on XDA. Hope this helps.
For the changelog see (ugh, can't post urls yet, cause I'm new, hope this helps anyhow): triple w dot cmxlog dot com slash 14.1
Seems to be already updated to reflect LineageOS instead of CM since few days back. Nice progress, I think.
hubot said:
For the changelog see (ugh, can't post urls yet, cause I'm new, hope this helps anyhow): triple w dot cmxlog dot com slash 14.1
Seems to be already updated to reflect LineageOS instead of CM since few days back. Nice progress, I think.
Click to expand...
Click to collapse
https://www.cmxlog.com/14.1/
I know not an appropriate question.. Anyways, can anyone confirm if we still get to use shelf on this rom?? Or is there some sideload app that supports oneplus shelf feature??
Your response is greatly appreciated.
Have a great day!
Alex711 said:
I know not an appropriate question.. Anyways, can anyone confirm if we still get to use shelf on this rom?? Or is there some sideload app that supports oneplus shelf feature??
Your response is greatly appreciated.
Have a great day!
Click to expand...
Click to collapse
Shelf is an OOS specificity.
But you can try some launcher's that have a lot of options replacing this.
Pretty sure there's a page for this Dev but he closed the thread as soon as Ashwin started posting builds.
Kéno40 said:
Shelf is an OOS specificity.
But you can try some launcher's that have a lot of options replacing this.
Click to expand...
Click to collapse
Thanks for sharing information :good:
Are there any Custom ROM's or Stock Android options for haydn devices? I'm open to something that is not 100% working with a few exceptions though.
I haven't tried it yet, but since we have a partially working and unsupported TWRP, try out Pixel Experience GSI or AOSP GSI. Someone in this device forum suggested but not sure if it would even work in the first place.
sundhar88 said:
I haven't tried it yet, but since we have a partially working and unsupported TWRP, try out Pixel Experience GSI or AOSP GSI. Someone in this device forum suggested but not sure if it would even work in the first place.
Click to expand...
Click to collapse
I'm curious to know the same. Waiting patiently.
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Well, I have the same phone. Couldn't find ROMs for it.
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Click to expand...
Click to collapse
look in this forum here, there are a couple floating around for it, I've made one, that I was able to fully flash to mine and has touch (Android 10. there's another that is 11 on here too by another poster), but as there are multiple display options out there it seems for how they were made, that is the sticking point, as not all will behave properly when booted into a recovery like mode it seems. I have tried installing it over bootloader and it will have touch then, but when flashed to recovery the touch never activates properly. So it all likely comes to that, as we'll need combine them in, properly applying proper checks for each display type and having it use the proper driver files, since can't load them all at once or it breaks things.
Working shrp for Borneo
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Click to expand...
Click to collapse
First place to start: twrpdtgen
Read the "readme"
Also check out:
[DEV]How to compile TWRP touch recovery
Device tree made from A10. Should still be relevant for A11.
Kernel for A10. Unfortunately I don't think Moto released the one for A11 yet. You can ask on their GitHub and devs might consider your request.
TWRP for A11. Touch is working.
Edit : here's a link for the device tree (in text) from A11
maybe this will work
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Click to expand...
Click to collapse
maybe this will help probably https://github.com/MotorolaMobilityLLC/kernel-msm
UPDATE: I have a telegram account where we are discussing how to make a custom lineage OS. I'm at the gathering stage and in the process of porting a device tree. For starters I want to start with lineage OS 18 because its the same android version the stock OS is, to be on the safe side, and that I've never done ROMS before.
Moto G Power 2021
I now have a device tree with the help of AOSPdtgen from the stock ROM from mirrors.lolinet: https://github.com/thebestofall007/android_device_motorola_borneo
I have started the build and got the first error:
https://imgur.com/a/XZoqy8B
I've looked this error up and they say it's because of the ram, but the error recurs at the same point. I have 16gb of swap, too.
thebestofall007 said:
I have started the build and got the first error:
https://imgur.com/a/XZoqy8B
I've looked this error up and they say it's because of the ram, but the error recurs at the same point. I have 16gb of swap, too.
Click to expand...
Click to collapse
you need alot of ram to build a rom for android 36GB of RAM or more will be beater to it wont crash
KILLFIREY1389 said:
you need alot of ram to build a rom for android 36GB of RAM or more will be beater to it wont crash
Click to expand...
Click to collapse
The error turned out to be entries in the proprietary-files.text file that needed to be deleted.
@thebestofall007 If you'll suceed. please take in consideration to build \e\ (aka deGoogled Lineage) too.
Here's a couple of interesting links that may help:
https://doc.e.foundation/support-topics/build-e
https://community.e.foundation/t/howto-building-e-roms-a-beginners-guide/26371
Last but not least, we've also suggested them (check here) to setup a "build (V)Machine" by modding this colab notebook to made it device agnostic:
https://github.com/viam1-dev/colab_lineage_build
Hope can "inspire" you.
Thanks in advance.
Does anyone have a complete list of sources so far? I have some experience in the past building ROMs for Android 5 and I wouldn't mind trying. I have a lot of computer resources to dedicate to building as well.
Device tree: https://github.com/thebestofall007/android_device_motorola_borneo-old
Does anyone know if there is a kernel source? I looked on the Moto github and couldn't find one. Is everyone using prebuilt for the time being? Also, do we need a vendor tree?
Thanks
AOSP 12.0 GSI - G6 ALIHello friends, how are you? I was pretty tired of the traditional roms we have for the Moto G6 there, (I got sick), these roms are excellent, but with time it ended up being more the same, that's when phhusson released an Android 12 GSI, I went to test it and found it amazing the operation on the system, unfortunately there is no way to use the SIM, but some improvements are even nice, I'm starting in this area of customization of the latest ROMs (current android)
You need a recovery that accepts ARM64 ROMs, and the GSI itself
In the link you select system-squeak-arm64-ab-vanilla.img.xz and download, then unzip and install on your system and test
GSI:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Depending on when you are watching this post the performance is already better, however I made this post to motivate the community (us) to try to port ROMs and GSIs for the Moto G6 ALI.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
How were you able to get an a/b partition GSI to boot properly on an A-only partition device like the Moto G6?. I've used A-only GSIs successfully on mine in the past but my understanding is A-only has been discontinued with release of a12.
I don't know man, but I just installed it, in the application that sees which system it is if it's AB or A only says it's AB, if I'm not mistaken I've already tested A only roms for it but it didn't work for some reason, I don't know if it's the current Vendor of the custom Roms I'm using or something else, I think it's the vendor since it's not an ARM32 but an ARM64, it can also be for recovery. In short, I don't know.
but it works
Don't know why an a/b gsi works on an a-only device but it does. Give this a12 gsi a try OctaviOS-v3.2-arm64_bvN-29122021-Unofficial.img.xz. It booted and I got an LTE signal no problem.
doesn't work for me
tried both 64 and 32, i'm using twrp 3.6.0_9-0 though, not sure if that is the problem, rolling back to 11 for now.
You might to flash permissive v4 before first boot after flashing the gsi image. https://androidfilehost.com/?w=search&s=Permissiver
Skippy12359 said:
You might to flash permissive v4 before first boot after flashing the gsi image. https://androidfilehost.com/?w=search&s=Permissiver
Click to expand...
Click to collapse
Nope, still gets a boot loop into the bootloader, i'll give it another try though
adhamnasr said:
Nope, still gets a boot loop into the bootloader, i'll give it another try though
Click to expand...
Click to collapse
Try man, because it's worth testing and seeing the Moto G6 ALI running Android 12, pretty cool
HeroRicky_Games09 said:
Try man, because it's worth testing and seeing the Moto G6 ALI running Android 12, pretty cool
Click to expand...
Click to collapse
i am, but maybe i'm doing something wrong
do you guys push the img and install using twrp or sideload?
edit: i reflashed it to stock, and gonna repeat the process
I didn't use stock boot or vendor when Octavia gsi booted for me. I was on the latest Ali Crdroid11 Dec patch, backed it up in latest twrp, did a normal wipe and flashed the vanilla Octavia arm64 a/b system gsi link above. Don't recall if it booted right away or if I went back to twrp and flashed permissiver v4. Either way it booted fine, got carrier signal right away (t- mobile) , sound also worked fine. Didn't flash gapps or anything else. Just was curious if an a/b gsi would actually boot on a G6 and both Aosp12 and Octavia both did for me. Try this permissive zip if the other doesn't work https://androidfilehost.com/?fid=6006931924117886495
Did a little research on telegram and found out a12 a/b gsi's will also work on an a-only device as long as the device supports SAR (system as root). Treble check app shows the G6 supports SAR and is arm64 so that's likely why they boot OK for some of us. That said the two I've tried Aosp12 and Octavia12 were laggy and would hang occasionally.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
I can't believe it, but I made it work...
adhamnasr said:
I can't believe it, but I made it work...
Click to expand...
Click to collapse
The cool thing about this GSI is that it runs without lags, the only problem is the mobile data. if it worked it would be perfect
HeroRicky_Games09 said:
AOSP 12.0 GSI - G6 ALIHello friends, how are you? I was pretty tired of the traditional roms we have for the Moto G6 there, (I got sick), these roms are excellent, but with time it ended up being more the same, that's when phhusson released an Android 12 GSI, I went to test it and found it amazing the operation on the system, unfortunately there is no way to use the SIM, but some improvements are even nice, I'm starting in this area of customization of the latest ROMs (current android)
You need a recovery that accepts ARM64 ROMs, and the GSI itself
In the link you select system-squeak-arm64-ab-vanilla.img.xz and download, then unzip and install on your system and test
GSI:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Depending on when you are watching this post the performance is already better, however I made this post to motivate the community (us) to try to port ROMs and GSIs for the Moto G6 ALI.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
Click to expand...
Click to collapse
I made a video installing this GSI on it, go there and check it out! It is in Portuguese Brazil.
Will it work on moto g6 play Jeter 3gb ram 64 bit cpu snapdragon 430 currently on Android 11 pixel experience
Nikhil15 said:
Will it work on moto g6 play Jeter 3gb ram 64 bit cpu snapdragon 430 currently on Android 11 pixel experience
Click to expand...
Click to collapse
possibly yes!
Can you tell the steps of installation because I don't understand brazilian
And please tell about bugs of anything