Related
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script to get into fastboot at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
So you solve it! :good:
:/
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
foreverman said:
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
Click to expand...
Click to collapse
Then try enter in lelus fastboot mode, ad then flash x-loader, uloader, boot.img and recovery.img from stock rom for your device type model. Then repeat steps 1 and 2
Where can I find the lelus script?
Sent from my Note II
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Then you need a Technician with a Octopus Box to repair your partition table...
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Can you boot into recovery? We now have a custom recovery for locked bootloaders (and CM roms). If you can get into recovery, I would try some adb commands to mount the partitions.
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
ciccillover said:
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
Click to expand...
Click to collapse
Your EMMC partition is wiped or fried... you really need a JTAG service or a Box like octopus because your L9 is Hard-bricked...
Thanks for your opinion. Yet, I still want to hear from others.
I'm running into more and more problems with the L9 as their me grows.
-Fastboot doesn't work under Windows 8.1 and 10, but under the now obsolete(for me) Windows 7, unlike my other devices, which are fine with Win 10.
-ADB seems to work, but requiring the device to be still able to boot.
-I always boot to recovery from within Android as long as the L9 ain't bricked. After a failed rom install, during which the sd card failed(could no longer write or be formatted afterwards, the last time stamps of files and folders were set during the failed install) I discovered a problem with TWRP(Artas182x's and Edwin's), which may have been present since a long time: Trying to invoke TWRP via keypress will brick the device!
So, if my P760 no longer boots, there's only download mode available, sort of the final line of defense.
-There's sort of a trick if even download mode fails: After a failed attempt unplug phone, force switch-off, if the phone is in brick state. Then switch on, force switch-off again, and only then attempt download mode again. And have patience while holding down the vol button, it might take up to 20 seconds for the phone to switch itself on into download mode. (A single forced powerdown will cause Fastboot NOT to work the next time)
But I'm absolutely clueless about the recovery issue, for now TWRP is semi-working, can only be accessed via Android, as long as the phone is fully working.
W/o Fastboot, I now have flashed stock rom several times and rooted it with Kingo rooter just to be able to run Flashify to install TWRP. If Flashify is the culprit for the TWRP issues, I could need a recommendation for a better working app.
ciccillover said:
Thanks for your opinion. Yet, I still want to hear from others.
Click to expand...
Click to collapse
Tried OMAP flasher ? It needs memory configuration file in order to work with our device
No, I didn't. I have sold the phone for spares.
Inviato dal mio LG-D855 utilizzando Tapatalk
I never needed the OMAP drivers and tools. As they are ancient, they will probably make even more problems with newer Windows versions.
I could by no means invoke Fastboot on this device with Windows 8.1 and 10, Seven worked. So you had to go for Download Mode instead to recover to stock rom, then root with the Kingo tool, then install TWRP via Rashr or Flashify, the most time consuming way to recover from the frequent bricks.
And the LG Flash Tool 2014 always needed several attempts to get the job done. The latest official recovery tool from LG works in D/L Mode, but will always download the rom image anew.
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
Maybe I'm just stupid, but I have a weird problem.
So: I was at new bootloader and I wanted to install an old backup I made with old bootloader. So I searched on XDA for an instruction to install the old bootloader. I found this http://forum.xda-developers.com/oneplus-x/general/2-2-x-lollipop-bootloader-download-t3479948 and I flashed the second zip. I installed my old backup and there was just the oneplus Logo, without the powered by android text. I tried to boot into recovery and flash my newest OOS zip. - Buuut there was just the Oneplus Logo too. So I tried to manually boot into recovery with fastboot - buuut fastboot did not recognize it (I cant even boot into fastboot mode on phone). So I thought that I have maybe hardbricked it and I did the hardbricked guide - buuut my phone was not even recognized as the Qualcomm xxx or so. It was just nothing (and yes I checked my USB connection). So I have no idea what I have to do now. Thanks for your help and sorry for my bad english.
IchBinNoob said:
Maybe I'm just stupid, but I have a weird problem.
So: I was at new bootloader and I wanted to install an old backup I made with old bootloader. So I searched on XDA for an instruction to install the old bootloader. I found this http://forum.xda-developers.com/oneplus-x/general/2-2-x-lollipop-bootloader-download-t3479948 and I flashed the second zip. I installed my old backup and there was just the oneplus Logo, without the powered by android text. I tried to boot into recovery and flash my newest OOS zip. - Buuut there was just the Oneplus Logo too. So I tried to manually boot into recovery with fastboot - buuut fastboot did not recognize it (I cant even boot into fastboot mode on phone). So I thought that I have maybe hardbricked it and I did the hardbricked guide - buuut my phone was not even recognized as the Qualcomm xxx or so. It was just nothing (and yes I checked my USB connection). So I have no idea what I have to do now. Thanks for your help and sorry for my bad english.
Click to expand...
Click to collapse
If it's not recognized, search and ask in mega unbrick guide thread. U may find your answer there.
Hi everyone,
first of all, I guess there should be a section dedicated to the Z5 to keep the forum clean!
Other than that, I'm really having trouble with my Z5. I can't find a way to move on from fastboot mode! Can't boot to edl, tried to flash recovery but they won't boot and so on...
Do someone has some idea? I can provide every information you need to troubleshoot that!
Thank you in advance,
Lorenzo Benevento.
Hi , inside stock firmware which .img files you have ?
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
edsmanco said:
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
Click to expand...
Click to collapse
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Teddy Lo said:
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Click to expand...
Click to collapse
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
help
how do u fix it? i have the same problem here, please help
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
Yes, how do u fix it? Share withy us.
xplozia said:
Yes, how do u fix it? Share withy us.
Click to expand...
Click to collapse
Join the telegram group: Lenovo Z5 Brasil, the guys there can help.
I used qfil to restore it.
I also used the video by rendroid. Send him a PM and he'll reply.
Hi there!
I've been trying out a few things and was wondering how on Earth you got it into fastboot mode in the first place? I can't find a way.
xplozia said:
Hello,
I bricked my Lenovo Z5. I need your help, please!
I installed from fastboot, Pixel Dust ROM and after that, the phone not starting. When I connect the phone to PC, I have message with Unlocking Bootloader (was unlocked initialy, on old rom) then Lenovo logo and after a black screen.
I downloaded ZUI_3.9.075_ST for Lenovo, I installed Qualcomm drivers, I installed Qfill but when connect the phone I don't have 9008 Port, to me is 900E. I read few forums about this error (https://zukfans.eu/community/threads...e-easily.3504/ and https://club.lenovo.com.cn/thread-3021991-1-1.html), I makeed a USB cable for DEEP Flash,I peeled the usb-c cable and touched Green and Black wires, but without success.
I installed a new Lenovo USB driver and with USB cable for DEEP Flash, I put the phone in the 9008 port, and Installed with successful, many ROMs 3.9.075, 3.9.200, 4.0.390 but every time after the first reboot appear message with opened bootloader then Lenovo logo and restarting to infinite.
When the phone is connected to PC I have on the phone a menu with "First Boot Mode" and the phone is accesible from PC:
"C:\Users\user>fastboot devices
bb806aa3 fastboot"
I will apreciate yours help. Thank you!
Click to expand...
Click to collapse
Did you follow this guide? https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/guide-how-to-flash-android-8-1-9-0-t3840839
Yes I see your post and I solved my phone
greetings,
im rookie here but once my MEDIATEK phone got stuck in fastboot mode and i fixed it with connecting to pc and type " fastboot reboot " in adb
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
share the fix
Please refer to the replies above
Lenovo z5s stuck in fastboot
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Thelostman said:
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Click to expand...
Click to collapse
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
xplozia said:
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
Click to expand...
Click to collapse
Don't worry i've already solved with some CHINESE PIROMANCY!!!!!!! Even with effective IMEI restoration (I couldn't restore the 2nd IMEI because I didn't know how to set up this one manually with the method I've used with my lenovo)
Hello,
I have a Lenovo Z5s. I wanted to install new android rom like Pixel Experience
I managed to unlock the bootloader with adb fastboot.
I succeeded in flashing TWRP recovery 3.3.1-0529 for my device.
I've downloaded Pixe Experience GSI rom available here https://forum.xda-developers.com/z5...evelopment/lenovo-z5s-pro-twrp-3-3-1-t3953346
I have copied and pasted the Pixel Experience rom (.img file) on my SD Card.
With TWRP, I have wiped necessary files for a clean install.
I have launched the installation of the rom, installation was complete, the phone has reboot, I show Pixel Experience boot sequence with Google logo. The process asked me a password (Encrypted?) . I decided to reboot the phone.
Now, the phone is blocked with a bootloop in recovery mode. I can't access anymore to TWRP recovery. (Erased?)
To explain clearly the situation: I have the menu showing these options: Restart bootloader > Recovery mode > Power Off > Boot to FFBM > Boot to QMM I> Start
FastBoot Mode
PRODUCT_NAME - sdm710
VARIANT - SDM EMMC
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - ********
SECURE BOOT - yes
DEVICES STATE - unlocked
No Bootloader, no Baseband.
All of the options return the phone back to the same menu.
The situation seems to be critical (phone bricked) and I can't do anything and I don't know what to do. Is there a chance to save my phone?
Your help will be precious to make my phone work.
Thanks in davance . Best regards.
Hey guys i am also in bootloop with unlocked bootloader ,can you please help us to save our phone !!!???
Hello guys!
I've been looking for a solution to this problem, I have a Moto One XT1941-5 that was never rooted nor bootloader unlocked. I left it charging and after about one hour it was at Fastboot Mode, it says that it failed booting from normal mode. Even if I try to restart or start normally, it gets back to Fastboot.
What have I done until now?
- Tried to flash the whole latest STOCK ROM again (manually with fastboot tools)
- Tried with a ROM from another region (mine is OPENMX and tried with RETLA) and I get the same
- Tried with Repair Assistant from Motorola, nothing happens.
- Tried to unlock bootloader, it asks me to enable OEM unlock on Developer settings (I can't, phone doesn't power up)
* Something that gets me confused is about the slots, $fastboot getvar all reports that none of the slots are bootable, every time I flash the ROM it says that slot A is bootable and B not, or that A is not bootable and B yes, or none of the slots are bootable.
Here are some screenshots about the info I have.
You can follow these steps from https://forum.xda-developers.com/motorola-one/how-to/unroot-ota-wipe-data-tested-t3905745 and then fastboot erase userdata and try to boot again.
lucasdeeiroz said:
You can follow these steps from https://forum.xda-developers.com/motorola-one/how-to/unroot-ota-wipe-data-tested-t3905745 and then fastboot erase userdata and try to boot again.
Click to expand...
Click to collapse
Just unzipped the bat, and opened with a text editor... those are exactly the commands I manually used, nothing has worked until now.
adri_sefp said:
Just unzipped the bat, and opened with a text editor... those are exactly the commands I manually used, nothing has worked until now.
Click to expand...
Click to collapse
When did you buy this phone?
borksek said:
When did you buy this phone?
Click to expand...
Click to collapse
On June 2018, warranty is not valid any longer. Carrier just give us 1 year here in Mexico.
I never had a problem like this, I was looking forward to find the blankflash for this model but it doesn't exist yet, maybe all I can do is wait for it or hard brick it. :crying:
adri_sefp said:
On June 2018, warranty is not valid any longer. Carrier just give us 1 year here in Mexico.
I never had a problem like this, I was looking forward to find the blankflash for this model but it doesn't exist yet, maybe all I can do is wait for it or hard brick it. :crying:
Click to expand...
Click to collapse
did you manage to solve this problem?
claudiusuflea said:
did you manage to solve this problem?
Click to expand...
Click to collapse
No, I think this problem has to do with the EMMC memory.
Yesterday I was trying again with the Android 10 stock rom using fastboot, nothing changes.
adri_sefp said:
No, I think this problem has to do with the EMMC memory.
Yesterday I was trying again with the Android 10 stock rom using fastboot, nothing changes.
Click to expand...
Click to collapse
that means there's no work-arround
adri_sefp said:
No, I think this problem has to do with the EMMC memory.
Yesterday I was trying again with the Android 10 stock rom using fastboot, nothing changes.
Click to expand...
Click to collapse
also, anyone having an ideea how to hard brick it to qualcomm 908/906 if it's fastboot bricked to blank flash it?
claudiusuflea said:
also, anyone having an ideea how to hard brick it to qualcomm 908/906 if it's fastboot bricked to blank flash it?
Click to expand...
Click to collapse
Even if you do that, there's no blankflash for this model... as long as I know, I was looking forward to find it somewhere but there is none available.
claudiusuflea said:
that means there's no work-arround
Click to expand...
Click to collapse
That's correct, now my device shows nothing on screen, it is just black but when I plug the usb cable, fastboot detects it as fastboot mode, all commands are working but nothing else works.
I'm giving up now.
claudiusuflea said:
also, anyone having an ideea how to hard brick it to qualcomm 908/906 if it's fastboot bricked to blank flash it?
Click to expand...
Click to collapse
UPDATE:
- I finally found a blankflash (my phone still the same) but you can give it a try.
LINK (copy and paste om your browser) drive.google.com/file/d/1-Dgj4WlbitUUHgcZmuBVR_bSendXLdAx/edit
1. To make your phone go to Qualcomm 9008 all you have to do is download an Android 8.1 stock rom from any region, flash it all using fastboot. You may get an error trying to flash boot.img but keep flashing the files.
2. Once you finish flashing and type: "fastboot reboot", your phone will boot into Qualcomm mode, it should be listed in Device Manager.
3. DISABLE any antivirus and download this blankflash, just unzip it and execute the blankflash.bat file.
4. Your phone should boot up in fastboot mode and you can start flashing the latest stock rom.
adri_sefp said:
UPDATE:
- I finally found a blankflash (my phone still the same) but you can give it a try.
LINK (copy and paste om your browser) drive.google.com/file/d/1-Dgj4WlbitUUHgcZmuBVR_bSendXLdAx/edit
1. To make your phone go to Qualcomm 9008 all you have to do is download an Android 8.1 stock rom from any region, flash it all using fastboot. You may get an error trying to flash boot.img but keep flashing the files.
2. Once you finish flashing and type: "fastboot reboot", your phone will boot into Qualcomm mode, it should be listed in Device Manager.
3. DISABLE any antivirus and download this blankflash, just unzip it and execute the blankflash.bat file.
4. Your phone should boot up in fastboot mode and you can start flashing the latest stock rom.
Click to expand...
Click to collapse
works if I have the bootloader still locked?
adri_sefp said:
UPDATE:
- I finally found a blankflash (my phone still the same) but you can give it a try.
LINK (copy and paste om your browser) drive.google.com/file/d/1-Dgj4WlbitUUHgcZmuBVR_bSendXLdAx/edit
1. To make your phone go to Qualcomm 9008 all you have to do is download an Android 8.1 stock rom from any region, flash it all using fastboot. You may get an error trying to flash boot.img but keep flashing the files.
2. Once you finish flashing and type: "fastboot reboot", your phone will boot into Qualcomm mode, it should be listed in Device Manager.
3. DISABLE any antivirus and download this blankflash, just unzip it and execute the blankflash.bat file.
4. Your phone should boot up in fastboot mode and you can start flashing the latest stock rom.
Click to expand...
Click to collapse
followed all the steps, bricking worked, but after flashing the latest software had the same problem
it would be nice if motorola would give us qfil software so we could flash it from the scratch
also, anyone any other option in this case? also found a dump of deen android 10 but I don't know what to do with it
claudiusuflea said:
followed all the steps, bricking worked, but after flashing the latest software had the same problem
it would be nice if motorola would give us qfil software so we could flash it from the scratch
also, anyone any other option in this case? also found a dump of deen android 10 but I don't know what to do with it
Click to expand...
Click to collapse
Was your device detected as Qualcomm? Did you use the blankflash file? Did yor phone boot to fastboot?
adri_sefp said:
Was your device detected as Qualcomm? Did you use the blankflash file? Did yor phone boot to fastboot?
Click to expand...
Click to collapse
Indeed, after flashing an Android 8 firmware my phone went into Qualcomm 908 EDL mode. After blankflashing and flashing the latest firmware had the same issue with "No bootable A/B slot". The same state before hardbricking the phone (AP Fastboot flash mode secure).
adri_sefp said:
Hello guys!
I've been looking for a solution to this problem, I have a Moto One XT1941-5 that was never rooted nor bootloader unlocked. I left it charging and after about one hour it was at Fastboot Mode, it says that it failed booting from normal mode. Even if I try to restart or start normally, it gets back to Fastboot.
What have I done until now?
- Tried to flash the whole latest STOCK ROM again (manually with fastboot tools)
- Tried with a ROM from another region (mine is OPENMX and tried with RETLA) and I get the same
- Tried with Repair Assistant from Motorola, nothing happens.
- Tried to unlock bootloader, it asks me to enable OEM unlock on Developer settings (I can't, phone doesn't power up)
* Something that gets me confused is about the slots, $fastboot getvar all reports that none of the slots are bootable, every time I flash the ROM it says that slot A is bootable and B not, or that A is not bootable and B yes, or none of the slots are bootable.
Here are some screenshots about the info I have.
Click to expand...
Click to collapse
maybe works "lenovo rescue and smart assistant"
Marc.os said:
maybe works "lenovo rescue and smart assistant"
Click to expand...
Click to collapse
No, lmsa would recognise the phones after A10 update, but the problem persists. Someone who has repaired this or someone who has managed to take it to the service or managed to revive the phone from this state? With locked bootloader
Marc.os said:
maybe works "lenovo rescue and smart assistant"
Click to expand...
Click to collapse
That didn't help either, there's nothing else we can do than replacing the main board.
Hello.
I have a similar problem. I have tried all of the methods listed, unfortunately nothing works. I ended up replacing the motherboard. The old PCB is waiting, maybe someday it can be repaired.