Related
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Some personal thoughts:
- you should read everything from top to bottom of this first page at least - i won't offer support for any issues that were already mentioned;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick), via paypal, if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Initial notes:
ONLY G950F / G950FD / G955F / G955FD / N950F / N950FD VARIANTS ARE SUPPORTED.
1. Don't forget to check bugs before any kind of questions
2. Since most of the GSIs are AOSP, forget about VoLTE, Knox features, Samsung apps, spen features, Camera mods or features, Iris or other Samsung related features.
3. The GCam we use in OneUI also doesn't work, i know, don't spam with "fix pls".
4. On Note 8 only one camera works, i want and i would like to fix that too, but i can't promise anything.
5. You can use any non-treble rom even if you have treble vendor installed, as long as you flash a non-treble kernel. The rom will ignore your vendor and everything will be as non treble.
* To go back to treble just flash vendor/treble kernel and the desired GSI.
* For the cases when you flashed back official twrp or reverted to normal - follow again all the "how to" steps, from below.
6. Not many kernels support treble now, don't try to flash/boot with others unless they specifically mention the kernel supports treble or you will drastically fail.
If any kernel dev wants to support this project feel free to reach me to provide some critical (ramdisk) patches.
General features:
- based on G965FXXU5CSGD August release
- Note8 files from N950FXXS7DSH1 - August release
- S8(+) files from G95*FXXS5DSH5 - August release
- Aroma vendor zip with selection of some things
- latest hadesKernel included with most of the features of OneUI kernel + other patches
- misc things enabled in framework overlay for better experience
- will update when i will remember
What works:
- everything else that's not listed under the bugs
General bugs:
- no signal bars shown (signal is fine tho) starting with mid-august builds signal bars are working
- fingerprint gestures
- touchscreen dies after a while with AOD/Ambient display always on (fixable with spamming power button 2-3 times)
How to convert to treble layout:
! make sure you are on latest official TWRP for your device (links in #2 post)
1) Download a PIE GSI from here, use ARM64, A only
2) Put GSI in internal storage
3) Reboot to recovery
4) Flash treble-convert zip
5) Reboot recovery
6) Flash downloaded GSI as image-system image
7) Reboot recovery
8) Flash treble-pie-vendor zip
9) Optional flash Magisk > 19.3
How to revert treble layout:
1) Reboot to recovery
2) Flash treble-revert zip
3) Reboot recovery
4) Wipe CACHE in twrp wipe menu
5) Flash any non treble rom or restore your previous twrp backup
Credits
@ananjaser1211
@prashantp01
@Noxxxious
@SuperR.
@jesec
@dron985
@phhusson
@ivanmeler
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
Project hadesTreble, Tool/Utility for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
corsicanu
Source Code: https://github.com/corsicanu/android_kernel_samsung_universal8895/tree/treble
Version Information
Status: Beta
Current Beta Version: v0.4
Beta Release Date: 2019-09-03
Created 2019-07-31
Last Updated 2019-09-19
Reserved
Download links:
v0.4-treble-pie-vendor
v0.3-treble-pie-vendor
v0.2-treble-pie-vendor
v0.1-treble-pie-vendor
MEGA folder
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
Latest Magisk stable or test/beta
O/P Bootloaders and modems
Reserved
You can find GSIs here , use ARM64, A only
Working GSIs and their bugs:
- phh AOSP - bootable, only general bugs
- phh Resurrection Remix - bootable, only general bugs
- EnesSastim AospExtended - bootable, only general bugs
- EnesSastim Pixel Experience Plus - bootable, only general bugs
- EnesSastim HavocOS - bootable, only general bugs
- peaktogoo Evolution X - bootable, only general bugs
- parags Evolution X - bootable, only general bugs
- ExpressLuke Evolution X - bootable, only general bugs (ril and brightness fixed)
- ExpressLuke HavocOS - bootable, only general bugs
- Vince31fr HavocOS 11.08.2019 - bootable, gapps needed, only general bugs
- ErfanGSI DirtyUnicorns - bootable, general bugs + advanced settings FC, stock cam crash, no account can be added
- Yey59 nitrOS - bootable, general bugs + stock camera crashing
- NFound DotOS (2019-04-09) - bootable, only general bugs
- Technical Bootleggers (2019-06-07) - bootable, only general bugs
- ErfanGSI MIUI Pie (2019-05-29) - bootable, brightness + general bugs + #miuifix
- king1990 Bliss (2019-04-05) - bootable, brightness + general bugs
- sixohtew OmniROM (2019-07-15) - bootable + general bugs
- Dil3mm4 Descendant (2019-07-10) - bootable + general bugs
- ErfanGSI Pixel Q beta 5 - bootable, general bugs + wifi (setup fails too because of this), fingerprint, storage, brightness slider, sdcard, low sound, bluetooth calls
- OxygenOS-Aonly-9-20190826-ErfanGSI - bootable after deleting "overlay" folder from /vendor, gms update needed, ril works, bugs: brightness, bt audio, face unlock, smart lock
- MIUI-9-20190831, bootable, general bugs + PlayStore and GMS update needed, BT don't pair, MI account, possible 2-3 reboots,
Not working GSIs and their bugs:
- ErfanGSI FlymeOs (2019-07-02) - not booting, black screen after bootsplash
- ErfanGSI ColorOS (2019-06-05) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-07-01) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-06-02/06) - not booting, stays at bootanimation
- ErfanGSI POSP (2019-05-30) - not booting, infinity reboots at bootsplash
- ErfanGSI Nubia (2019-06-05) - not booting, stays on bootanimation
- OnePlus7Pro5G (2019-07-06) - not booting, stays on bootanimation
- MacTavish ColorOS (2019-03-23) - not booting, stays on bootanimation
- ErfanGSI ZUI (2019-06-17) - bootable(?), black screen
- ErfanGSI OxygenOS Q (2019-07-29) - bootable(?), SystemUI crashes
- MIMAX3Global (20190802) Pie - booting, reboots every 3sec
- OnePlus7Hydrogen (20190725) - booting, SysUi crashing every 3sec
- OnePlus6THydrogen (20190807) - not booting
- OxygenOS 10 (20190808) Erfan - booting, black screen
Others might work too, test and report and i will update the list.
I strongly recommend using PIE built from source gsis, oem ported images might not boot at all or be filled with other bugs, i won't care of those, remember you are on Samsung, Exynos, on a ported vendor, if you want real/better treble, move to any other device/soc.
As for Q, ErfanGSI Pixel Q beta 5, but it has tons of unfixable bugs right now, flash at your own risk or wait for Q source to drop in order to become patch'able.
Special thanks for testing and contributing on updating the list to @ZcoderDEV, @AndrzejDwo, Pócs Márk, Shayan, @snikerfreak @Soydere and many other users, this place is too small to mention everyone.
FAQ (for later)
Great work as always corsi. this is big
Good job Mate
That is very big step. Thank you for your works.
Amazing alpha port
Thank you @corsicanu for your amazing work You're the best dev for the 8895 family :victory:
Now it's time to break the ice :
- Following your instructions, I was able to boot GSI in about five minutes.
- I chose to install Evolution X GSI (download link : https://sourceforge.net/projects/evolution-x/files/GSI), don't forget to choose A ONLY !
- When you reboot to boot for the first time, it's possible that your Note will reboot itself several times (for me it was 3 times, and it isn't a bootloop if you follow the OP installation).
- Every reboot you will be getting prompt saying you're having an internal problem with your device, don't worry it isn't the case.
- I experienced all the bugs you've mentionned. And don't let the battery discharge completly because you won't be able to charge it again in "offline mode" (thus I wonder if wireless charging will work in this mod but i don't have one to test unfortunately).
- Bluetooth isn't working, only the switcher in settings is. And in QP if you turn it on it will turn off 10 sec later. In settings there is a mention that your device isn't able to detect anthing around.
- NFC isn't working either. Everything seems to be fine (won't switch off by itself) but can't share something via Android Beam (Galaxy Note 3).
- Dual Boot Patcher isn't working, will end up in bootloop.
If you need help for testing just tell me
Once again, amazing job and well done :highfive:
Alek7 said:
Thank you @corsicanu for your amazing work You're the best dev for the 8895 family :victory:
Now it's time to break the ice :
- Following your instructions, I was able to boot GSI in about five minutes.
- I chose to install Evolution X GSI (download link : https://sourceforge.net/projects/evolution-x/files/GSI), don't forget to choose A ONLY !
- When you reboot to boot for the first time, it's possible that your Note will reboot itself several times (for me it was 3 times, and it isn't a bootloop if you follow the OP installation).
- Every reboot you will be getting prompt saying you're having an internal problem with your device, don't worry it isn't the case.
- I experienced all the bugs you've mentionned. And don't let the battery discharge completly because you won't be able to charge it again in "offline mode" (thus I wonder if wireless charging will work in this mod but i don't have one to test unfortunately).
- Bluetooth isn't working, only the switcher in settings is. And in QP if you turn it on it will turn off 10 sec later. In settings there is a mention that your device isn't able to detect anthing around.
- NFC isn't working either. Everything seems to be fine (won't switch off by itself) but can't share something via Android Beam (Galaxy Note 3).
- Dual Boot Patcher isn't working, will end up in bootloop.
If you need help for testing just tell me
Once again, amazing job and well done :highfive:
Click to expand...
Click to collapse
Nice and complete feedback, thanks for it.
However, try to reflash vendor, i used bluetooth on Evo X with car bluetooth for media and for calls so i can confirm it works. As for nfc, it worked for me as i use my phone to pay for things.
Sent from my SM-N950F using Tapatalk
v0.2 is up
Changelog:
fixed autobrightness thanks to @dron985
added gpu driver apps
How to install:
if you are already on a GSI and have v0.1 flashed, flash only vendor as a normal zip, (optional - flash Magisk > 19.3)
coming from any other setup - check first post install instructions.
Download:
Mega
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
O/P Bootloaders and modems
Personal notes:
If you are new here, make sure you read everything from first page before messing with your phone.
Make sure you backup everything before flashing, things might not work as expected.
Regards!
ananjaser1211 said:
Great work as always corsi. this is big
Click to expand...
Click to collapse
You know you've done an good job when Anan himself drops by! This is big indeed! Thanks Corsi
Reflashed my Note with Odin and installed everything again with vendor v0.2, now Bluetooth and NFC are working properly
When installing or flashing the GSI as zip, an error message comes or do I need to unpack the file beforehand?
Shogunes said:
When installing or flashing the GSI as zip, an error message comes or do I need to unpack the file beforehand?
Click to expand...
Click to collapse
Unpack and flash image as system image.
Sent from my SM-N950F using Tapatalk
Following all the steps I installed RR image, the first time it stayed in the boot, then try again doing a format data and voila! Excellent Bluetooth connection with the car, camera OK and I almost feel no bugs. I do not know if it will be basic but just in case, the image is installed in System and do not forget to download Gapps ... Thank you very much.
Installed pixel experience gsi, works great, haven't experienced any new bugs yet.
Camera is ok.
GOD OF HADES!!! TRUE AND THE ONLY!!!
How many sleepless nights it had costed since first attempt 10 months ago, probably only Your Wife knows ? But as many @Eliteteam members' projects, which we know from the past (big KISS to @ananjaser1211 ?), also this one - EFFECTS ARE THE MOST IMPORTANT, time is not even a minor thing.
Big CONGRATS to You, smaller for the testers ? (but truly deserved) and the biggest THERE U GO for All that didn't have enough patience and FAITH.
Keep Exy8895 alive as long as possible (tho Ur new toy is already on the desk)!
Pls delete
I had already tried rr,nitrOs,nitrogen os,Havoc os,,octopus,dot os ,only rr, nitr n havoc can boot n just some bags.
Is there a way to install the beta of the Pixel with Android Q?
About LineageOS
LineageOS is a free, community-built, aftermarket firmware distribution of Android 10.0 (Ten) which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS GitHub repo and if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website
Downloads Links
begonia | begoniain
Google Applications (optional) :
OpenGapps (Use packages for ARM64, Android 10.0, Nano)
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
LineageOS clean install :
- Boot into the LineageOS recovery.
- Format data and install the latest LineageOS build
- Install OpenGAPPS package, if you want GAPPS otherwise skip this step
- Wipe Dalvik/Cache and Reboot into System
About the builds
- Device Side Sources are on official org
Issues and reports
- Report issues only if you use the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error and steps to reproduce it
You can also join and help me debug your issues in the following Telegram Group: https://t.me/xiaomi_begonia | Not required but donations are welcome: Paypal
XDA:DevDB Information
LineageOS-17.1, ROM for the Redmi Note 8 Pro
Contributors
TheImpulson
Source Code: https://github.com/LineageOS/android_kernel_xiaomi_mt6785
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 17.1
Stable Release Date: 2020-08-11
Created 2020-03-26
Last Updated 2020-08-12
Current Bugs include:
The camera doesn't have full resolutions support yet
SELinux is Permissive
Don't report bugs related:
to CTS failures (LineageOS does not tamper with CTS results)
with Magisk (It sets a number of props on boot like changing build type to the user resulting in broken adb root etc)
with Custom Kernel, MODs (Report that to MOD maintainer)
with non-recommended vendor or builds (Use what is told in instructions)
Reserved
Reserved
Amazing to see this around. Thanks for your hard work. Will probably play around with this for a while
This rom willl be good for daily driver?
L1nx99 said:
This rom willl be good for daily driver?
Click to expand...
Click to collapse
Please, it's just 3 posts above, read. See BUGS and decide if this can be a daily driver for you.
For ME, when Wifi is fixed, it will be a daily driver. And I will wait patientily until then, helping the dev whenever I can testing releases.
wifi working fine
Reserved !
Is USB tethering work?
when NFC will be working ?
Is it even possible for NFC to make it to working?
Ask it another time in the same page please. If it was possible it would've been done already. Probably working on it, figuring out how to do it or just busy with other stuff. Be patient and be glad that some of these devs are working in this device.
korbielow said:
when NFC will be working ?
Click to expand...
Click to collapse
Asking for ETA is against XDA forum rules and disrespectful to the developer.
It will be done when it's done. If you can't wait, use stock.
I must downgrade Android 10 to 9,to be able to flash this ROM,or any other?
tze_vitamin said:
I must downgrade Android 10 to 9,to be able to flash this ROM,or any other?
Click to expand...
Click to collapse
If you are on MIUI 11 - Android 10, you WILL need to downgrade to Android 9! This method will not work if you're on Android 10. Use MiFlashPro or fastboot to flash all partitions to a compatible MIUI 10 or 11 Android 9 build.
copypasta from megathread.
L1nx99 said:
This rom willl be good for daily driver?
Click to expand...
Click to collapse
L1nx99 said:
Is USB tethering work?
Click to expand...
Click to collapse
korbielow said:
when NFC will be working ?
Click to expand...
Click to collapse
Pushed a new update on GitHub Releases. Here is the changelog:
- Updated safe media volume warning level
- Hided sRGB toggle in developer options
- Fixed Ambient display and enabled Always on Display
- Fixed brightness issues by importing overlays from Google Pixel (marlin)
- Added Trust Hal, see it in Privacy Settings
- Enable option for full-screen aspect ratio
- Added notch overlay, this makes center clock and network speed indicator unavailable as they are unsupported with notched devices
- Added led notification and battery led customization options, see it in Notifications settings
- Turned on WiFi MAC randomization
- Hex-edited MTK RIL lib to fix incoming calls
- Upstreamed kernel to v4.14.158
The hotspot is also working, however, it's buggy. You need to remove SIM cards to make it work. That will be fixed in future builds (hopefully).
TheImpulson said:
Pushed a new update on GitHub Releases. Here is the changelog:
- Updated safe media volume warning level
- Hided sRGB toggle in developer options
- Fixed Ambient display and enabled Always on Display
- Fixed brightness issues by importing overlays from Google Pixel (marlin)
- Added Trust Hal, see it in Privacy Settings
- Enable option for full-screen aspect ratio
- Added notch overlay, this makes center clock and network speed indicator unavailable as they are unsupported with notched devices
- Added led notification and battery led customization options, see it in Notifications settings
- Turned on WiFi MAC randomization
- Hex-edited MTK RIL lib to fix incoming calls
- Upstreamed kernel to v4.14.158
The hotspot is also working, however, it's buggy. You need to remove SIM cards to make it work. That will be fixed in future builds (hopefully).
Click to expand...
Click to collapse
Thank you for the update!
video bug in instagram,whatsapp,facebook etc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (marlin) (Download from here)
TWRP (sailfish) (Download from here)
GApps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
Unlock the Bootloader.
Download and install the latest version of SDK Platform-Tools.
Download the latest TWRP version to your PC from the link in the OP and boot it using:
Code:
fastboot boot <name_of_twrp_file>.img
Perform a factory reset and also format the data partition using TWRP.
Download the crDroid version of your liking to your PC (Vanilla version is to be used without GApps, the GApps version already has GApps included.)
Sideload the crDroid Zip:
In TWRP enable adb sideload.
On the PC type:
Code:
adb sideload <name_of_crDroid_downloaded_package>.zip
OPTIONAL: Do you want to install Magisk?
Download the version of your choosing from Magisk's repo (link in OP).
In TWRP tap Reboot and then tap Reboot to recovery and swipe the slider to reboot to recovery.
In TWRP enable adb sideload.
On the PC type:
Code:
adb sideload <name_of_Magisk_package>.zip
Reboot
Done
OPTIONAL: If you installed Magisk, you an check out the magisk modules linked in the OP, they include fixes, add-ons and useful mods for the crDroid builds.
Update installation:
Download the latest TWRP version to your PC from the link in the OP and boot it using:
Code:
fastboot boot <name_of_twrp_file>.img
Download the crDroid update to your PC (Vanilla version is to be used without GApps, the GApps version already has GApps included.)
Sideload the crDroid Zip:
In TWRP enable adb sideload.
On the PC type:
Code:
adb sideload <name_of_crDroid_downloaded_package>.zip
Done
Thanks to @Homeboy76 for helping with the updated flashing instructions.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/blckbearx/android_kernel_google_marlin/tree/lineage-18.1-upstream
Device tree: https://github.com/blckbearx/android_device_google_marlin/tree/crdroid-11
Vendor: https://github.com/blckbearx/proprietary_vendor_google/tree/crdroid-11
Download:
marlin:
Vanilla
GApps
sailfish:
Vanilla
GApps
All builds:
marlin
sailfish
Magisk modules:
GApps Add-on: Flash this Magisk module in order to systemlessly install Android System Intelligence and Google app, thus enabling Live Captions and other functions. This should also work on LineageOS 18.1 if for whatever reason your GApps package doesn't already contain these apps.
Camera patches: This Magisk module enables the long exposure for Camera PX, 2K video recording for both front and back cameras (with OpenCamera or similar), it enables near 4K video resolution for the front camera (with OpenCamera or similar) and it gives Camera PX the proper SELinux permissions in order to process HDR+ images faster. Only use this module on crDroid 7.x.
VoLTE: This Magisk module makes the system always show the VoLTE, ViLTE and VoWiFi toggles regardless of your carrier, useful for people whose service provider supports this options but can't enable them for some reason. Your carrier needs to support VoLTE for marlin/sailfish in the first place, this won't make VoLTE work magically on any carrier. This module can be used on any ROM.
Changelog:
crDroid 7.30 (17/05/2023):
May 2023 Security Patch.
Switched back to Stock+ kernel (I mistakenly built the two previous updates with LineageOS' kernel).
crDroid 7.29 (24/04/2023):
April 2023 Security Patch.
crDroid 7.27 (22/02/2023):
February 2023 Security Patch.
crDroid 7.26 (20/01/2023):
January 2023 Security Patch.
crDroid 7.24 (15/11/2022):
November 2022 Security Patch.
crDroid 7.23 (15/10/2022):
October 2022 Security Patch.
Small kernel improvements.
Boot animation is now fixed.
crDroid 7.22 (7/10/2022):
September 2022 Security Patch.
Reduced zRAM size back to 512MB.
Boot animation is broken, this issue is fixed for October's update.
crDroid 7.21 (22/08/2022):
August 2022 Security Patch.
Reverted fingerprint to March 2018, SafetyNet is now fixed.
A bunch of I/O improvements in the kernel.
crDroid 7.20 (20/07/2022):
July 2022 Security Patch.
Removed PixelPropsUtils. You may need MagiskHide Props Config to pass SafetyNet.
A bunch of kernel improvements.
Renamed kernel to Stock+.
Added USB Fast Charging (you need a kernel manager like FKM to enable it).
Increased minimum CPU frequencies.
Set zRAM size to 1GB.
Added High Brightness Mode (you need a kernel manager like FKM to enable it).
Added Westwood TCP algorithm and set it as default.
Added Backlight Dimmer and enabled it as default.
Enabled High Performance Mode for the Audio DAC.
Some small device tree changes.
crDroid 7.19 (1/07/2022):
June 2022 Security Patch.
A bunch of kernel improvements picked from LunarKernel and NeutrinoKernel (Thanks @Lunarixus and @spezi77).
Added schedutil CPU governor and set it as default.
Reduced GPU idle power level. It should now idle at the lowest power level.
Some small device tree changes.
crDroid 7.18 (18/05/2022):
May 2022 Security Patch.
Dirac Sound Enhancer added.
Some small device tree changes.
crDroid 7.17 (28/04/2022):
April 2022 Security Patch.
Upstreamed kernel to v3.18.140 from v3.18.137.
Removed in-built MatLog as it didn't work quite well and this saves some /system space.
Gave SystemUI acces to thermals, now the CPU Info floating widget should show temperature of the CPU.
Some schedtune and hotplug changes to improve boot times and foreground app performance.
Fixed OEM charger detection. Now when plugging a PD compliant charger the phone should always say that it's fast charging.
Removed the forced availability of VoLTE, ViLTE and VoWiFi for all carriers because it cluttered the UI for people that don't have VoLTE. It's now included in a Magisk module available under the Downloads section.
crDroid 7.16 (16/03/2022):
March 2022 Security Patch.
Removed ih8sn from all builds.
Forced availability of VoLTE, ViLTE and VoWiFi for all carriers (your carrier should support it to use it obviously).
Merged all changes to date from Official LineageOS trees.
crDroid 7.15 (03/03/2022):
February 2022 Security Patch.
GApps version now available.
Removed ih8sn from Vanilla builds.
Updated ih8sn.
Using Official LOS 18.1 trees as base.
crDroid 7.14 (03/02/2022):
Enabled Smart Pixels.
Enabled Smart Charging.
Enabled Always On Display.
Enabled Extra Battery Info.
Enabled OEM Fast Charging detection.
Updated ih8sn and it's configs.
crDroid 7.14 (23/01/2022):
Initial build.
January 2022 Security Patch.
ih8sn included.
Known issues:
None
Visit official website @ crDroid.net
Google Pixel/Pixel XL Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
New Update
Changelog:
crDroid 7.14 (03/02/2022):
Enabled Smart Pixels.
Enabled Smart Charging.
Enabled Always On Display.
Enabled Extra Battery Info.
Enabled OEM Fast Charging detection.
Updated ih8sn and it's configs.
Awesome, thank you!
New Update
Changelog:
crDroid 7.15 (03/03/2022):
February 2022 Security Patch.
GApps version now available.
Removed ih8sn from Vanilla builds.
Updated ih8sn.
Using Official LOS 18.1 trees as base.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to flash the GApps Add-on Magisk module or download the Google App from the PlayStore to get full functionality.
New Update
Changelog:
crDroid 7.16 (16/03/2022):
March 2022 Security Patch.
Removed ih8sn from all builds.
Forced availability of VoLTE, ViLTE and VoWiFi for all carriers (your carrier should support it to use it obviously).
Merged all changes to date from Official LineageOS trees.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to flash the GApps Add-on Magisk module or download the Google App from the PlayStore to get full functionality.
blckbear said:
New Update
Changelog:
crDroid 7.16 (16/03/2022):
March 2022 Security Patch.
Removed ih8sn from all builds.
Forced availability of VoLTE, ViLTE and VoWiFi for all carriers (your carrier should support it to use it obviously).
Merged all changes to date from Official LineageOS trees.
Notes:
For GApps version the Google App had to be removed, so it's hardly recommended to download the Google App from PlayStore to get full functionality.
Click to expand...
Click to collapse
In notes you mentioned "it's hardly recommended.." I guess you meant "it's highly recommended.."
gverma1 said:
In notes you mentioned "it's hardly recommended.." I guess you meant "it's highly recommended.."
Click to expand...
Click to collapse
You're absolutely right, thanks for the head up!
blckbear said:
New Update
Changelog:
crDroid 7.16 (16/03/2022):
March 2022 Security Patch.
Removed ih8sn from all builds.
Forced availability of VoLTE, ViLTE and VoWiFi for all carriers (your carrier should support it to use it obviously).
Merged all changes to date from Official LineageOS trees.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to download the Google App from PlayStore to get full functionality.
Click to expand...
Click to collapse
Hi, regarding "Forced availability of VoLTE, ViLTE and VoWiFi for all carriers", is this behaviour any different from LineageOS. Thanks.
simplex19 said:
Hi, regarding "Forced availability of VoLTE, ViLTE and VoWiFi for all carriers", is this behaviour any different from LineageOS. Thanks.
Click to expand...
Click to collapse
HI, forced availability means that the option is always there, for everyone, even if your carrier doesn't support it, it will obviously not work if your carrier doesn't support it even if you enable it. This was done because for some carriers that do support it, it wasn't available.
blckbear said:
HI, forced availability means that the option is always there, for everyone, even if your carrier doesn't support it, it will obviously not work if your carrier doesn't support it even if you enable it. This was done because for some carriers that do support it, it wasn't available.
Click to expand...
Click to collapse
Thanks for the response! I shall check it out. As far as I know, my carrier only supports iPhones and a limited roster of Androids for VoLTE so I'm curious how the forced availability will play out.
simplex19 said:
Thanks for the response! I shall check it out. As far as I know, my carrier only supports iPhones and a limited roster of Androids for VoLTE so I'm curious how the forced availability will play out.
Click to expand...
Click to collapse
Then it will probably not work, the forced availability just makes the setting visible, but if your carrier only supports iPhones, then even if you enable VoLTE in settings it will still not work.
New Update
Changelog:
crDroid 7.17 (28/04/2022):
April 2022 Security Patch.
Upstreamed kernel to v3.18.140 from v3.18.137.
Removed in-built MatLog as it didn't work quite well and this saves some /system space.
Gave SystemUI acces to thermals, now the CPU Info floating widget should show temperature of the CPU.
Some schedtune and hotplug changes to improve boot times and foreground app performance.
Fixed OEM charger detection. Now when plugging a PD compliant charger the phone should always say that it's fast charging.
Removed the forced availability of VoLTE, ViLTE and VoWiFi for all carriers because it cluttered the UI for people that don't have VoLTE. It's now included in a Magisk module available under the Downloads section.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to flash the GApps Add-on Magisk module or download the Google App from the PlayStore to get full functionality.
New Update
Changelog:
crDroid 7.18 (18/05/2022):
May 2022 Security Patch.
Dirac Sound Enhancer added.
Some small device tree changes.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to flash the GApps Add-on Magisk module or download the Google App from the PlayStore to get full functionality.
ขอบคุณ
Satit888 said:
ข
Click to expand...
Click to collapse
б
@blckbear thank for the builds i dusted of my OG PXL thanks again
nice breath of life into the old phone
New Update
Changelog:
crDroid 7.19 (1/07/2022):
June 2022 Security Patch.
A bunch of kernel improvements picked from LunarKernel and NeutrinoKernel (Thanks @Lunarixus and @spezi77).
Added schedutil CPU governor and set it as default.
Reduced GPU idle power level. It should now idle at the lowest power level.
Some small device tree changes.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to flash the GApps Add-on Magisk module or download the Google App from the PlayStore to get full functionality.
no luck dirtyflashing gapps version, since I started with non-gapps back on 7.14.
had to flash non-gapps rom then opengapps and it boots again with my data intact ^^'
New Update
Changelog:
crDroid 7.20 (20/07/2022):
July 2022 Security Patch.
Removed PixelPropsUtils. You may need MagiskHide Props Config to pass SafetyNet.
A bunch of kernel improvements.
Renamed kernel to Stock+.
Added USB Fast Charging (you need a kernel manager like FKM to enable it).
Increased minimum CPU frequencies.
Set zRAM size to 1GB.
Added High Brightness Mode (you need a kernel manager like FKM to enable it).
Added Westwood TCP algorithm and set it as default.
Added Backlight Dimmer and enabled it as default.
Enabled High Performance Mode for the Audio DAC.
Some small device tree changes.
Notes:
For GApps version the Google App had to be removed, so it's highly recommended to flash the GApps Add-on Magisk module to get full functionality.
Anx Camera for custom ROMs [ DEPRECATED ]
PS: Use Mi camera new port from second post.
Android 12 & 12L
Download:
- v7.0
Android 13
Download:
- v7.1 ( working on Pixel Os except 48MP)
- v7.2 ( working on many roms )
1. Flash miui camera magisk module.
2. Reboot.
3. Enable Permissions in App Info if launching the app at first does not ask for any permission (Camera, Files, Location, Microphone).
Changelogs:
09.09.2022
• Fixed slow motion along with 48MP mode.
• Fixed Portrait mode + filters along with wide/uw/macro lens.
• Enabled documents, Night, short video, time-laps, long exposure and clone modes.
• Enabled and edited watermark as "SHOT ON REDMI NOTE 10 AI QUAD CAMERA".
18.09.2022
• Fixed portrait again on some Roms.
• Fixed HDR mode on back camera.
• Fixed broken zoom ( green screen ).
17.10.2022
• Upgraded to v7.2 and dropped A12 builds.
• Fixed 48MP on A13 ( thanks to @Anush02198 for help).
• Fixed front portrait.
• Removed front slow motion button ( was causing crashes ).
• Removed scanner miui app and fixed Document option.
AEonAX link
AnxCamera wiki
Thanks to:
AEonAX, SonalSingh18 and AMRGAMAL1
New Mi Camera port [ magisk module]
Version 4.3
Build date : 18-11-2022
For mojito A13 Custom Roms
Mi Camera magisk module:
➥ Download [Gdrive]
Instructions:
• Delete any anx / miui camera magisk modules if there is already.
• Flash via magisk manager Mi Camera magisk module and reboot to system.
• If necessary, flash 48MP fix magisk module according to android security patch then reboot to system ( uninstall 48MP fix if you get "can't connect to camera").
48MP fix for android 13 magisk module (November 2022 security patch and previous):
➥ Download [Gdrive]
48MP fix for android 13 magisk module (+December 2022 security patch):
➥ Download [Mega]
48MP fix for android 12 magisk module:
➥ Download [Gdrive]
Changelog:
• Optimized for mojito.
• Added necessary vendor libraries.
• Unnecessary codes removed.
• Experimental features unlocked.
• Enabled Night, 48MP, Short video, Panorama, Documents, VLOG, Time-Laps, Slow motion, Movie Effects, Ai Watermark, Custom Watermark, Clone modes..
15-12-2022
• added new 48MP fix for December security patch.
29-12-2022
• Removed parallel processing from experimental features.
• Switched to platform keys.
• Fixed few sepolicy rules.
11-06-2023
• Fixed timed burst in pro mode.
• Fixed back portrait in some ROMs.
• Removed experimental features and its annoying message.
• Switched to original mi camera icon.
• Added monet support (only in camera settings for now).
• Fixed parallel-processing on Android 13 (by ceracz)
• Set default HDR mode to Auto (by ceracz).
• Dropped stock camera provider (by ceracz), so no need to 48MP fix.
19-06-2023
• Fixed blur in background on portrait mode.
Notes:
• ROMs builders should add this commit, to fix front camera & portrait issues if it is not included in rom source: https://github.com/SpiceOS/android_bionic/commit/e1b0c860ea4dfc74cf9c016812b0d3aea315b1d0
• For those who want include Mi Camera on their builds, use this repo, this commit and this commit.
• To fix 48mp from source add this commit:
https://review.lineageos.org/q/topic:twelve-camera-privapp
• Don't use spoofing module like Dolby Atmos or Pixel props .. Otherwise they will affect camera functionallies.
Thanks to:
AmrGamal, Ceracz ,Praditia Nur, Anush,
Anx team and all testers.
Do you have MIUI gallery?
ibanezred16 said:
Do you have MIUI gallery?
Click to expand...
Click to collapse
This apk worked for me:
Google Drive - Download warning
drive.google.com
Disable Force Encryption for
Mojito / oss vendor :
Usage:
1- Comming from encrypted rom
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Format data
- Reboot system
2- Comming from decrypted rom
- Wipe data/dalvik/cache
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Reboot system
Notes:
• This zip decrypt your data.
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Increase sawp (ZRAM) from 2Gb to 4Gb
installation:
- Go to ofox recovery
- Flash attached zip
- Reboot to system
Ps:
Some roms have limited vendor partition size and RO, so they don't accept fstab.zram file modification or decryption.
Don't flash this zip on Roms having Neternels kernel as it has by default 4gb vbswap.
KProfiles modes (only for neternels kernel) :
Switch between battery , balanced and performance modes (manual or auto) using KProfiles app ( settings / battery / or using qs tile ).
- Flash Kprofiles magisk module.
- Reboot.
- Tested and worked on many a12L/a13 roms.
Ps:
It won't work on Roms using non-Neternels kernel.
Hami_Do said:
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Click to expand...
Click to collapse
This is a great achievement. Weldone Hami_do
Hami_Do said:
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on Roms having RO vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Click to expand...
Click to collapse
Unlike the classic method which decrypts data at vendor fstab level, the new method can decrypt data even on RO roms such as erofs roms.
Soon i will let you know how..
Edit:
Last time I have decrypted successfully Arrow Os A13 erofs (Read Only ROM) using dfe-neo from here :
[A/B][A-ONLY][SCRIPT][READ-ONLY][EROFS][ANDROID 10+] Universal Disable Force Encryption for RO and RW "NEO STABLE"
Disable Force Encryption NEO Do you all know what DFE is? no? Anyway. Basically, your device has an encrypted data section "/data" by default. Let's look at the advantages of google's solution that we will lose after disabling encryption: -...
forum.xda-developers.com
thanks for the miui camera port
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Has anyone tried the flashable anx camera on pixel os a12?
devcon69 said:
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Click to expand...
Click to collapse
Can you show which pixel props to disable?
Mthw said:
Has anyone tried the flashable anx camera on pixel os a12?
Click to expand...
Click to collapse
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
pihpih95 said:
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
Click to expand...
Click to collapse
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Samir2298 said:
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Click to expand...
Click to collapse
I see, thanks for the information i think i will try anxcam with WCSF later and report it back here
Mthw said:
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Click to expand...
Click to collapse
Flashing files directly in system you can't on erofs i agree, but flashing magisk modules on erofs is possible , there is no problem.
----
@pihpih95 I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Hami_Do said:
I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Click to expand...
Click to collapse
i found that whenever i record the video , it is not save to any of my storage , how to overcome this problem ? im using WCSF-PLC latest on AncientOS GSI,taking picture just fine , im using port v7 anxcam
FEATHER PROJECT
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Index:
OneUI 4:
|--> Galaxy S10e port for A20 Click here discontinued
OneUI 5
|--> Galaxy S22 port for A20 Click here Priority updates
|--> Galaxy M12 port for A20 Click here
Latest ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
More credits mentioned in sub pages
Release Date: 2023-04-02
Last Updated 2023-04-02
FEATHER PROJECT S22 T
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Features:
Based on S901BXXU4CWCG
Security Patch April 2023
OneUI 5.1 - Android 13
Eureka Kernel R11
Enforcing Selinux
Magisk V-25.2
Samsung Stock AOD
S22 + S23 Wallpapers
Side Key Functions
Edge Panel
Disabled FRP
VoLTE & VoWiFi
Bluetooth Calls
Flagship animations
Samsung Dex
Dolby Atmos
Enhanced GPS
AppLock
A13 Colour Palette
Secure folder pre-patched
BT lib pre-patched
OneUI5 Apps
WiFi Sharing
Bugs:
Safetynet with root only
Face Unlock
Netflix L1
Low light Photos
Moving Apps to Sdcard
Installation:
Spoiler: Installation
Installation Procedure:
Preferred Recovery: Latest TWRP
1. Make a Backup of EFS and all your important data
2. Start by wiping System,Vendor,Product,Data,Cache, Dalvik-Cache
3. Reboot to Recovery
4. Read carefully and select Wisely in Aroma Installer
5. Reboot to System
6. Install Magisk apk normally in the system
7. Update Android System Webview from Play Store by searching it
7. Enjoy
- Dex Touchpad is only supported in newer kernel 10.1+, while the rest of the Dex works fine on all kernels
Changelog:
Spoiler: Changelog
Changelog v0.1:
Initial Release S901BXXU2BVJA
Changelog v0.2:
- update audio hal
- using s10e audio policy for fixing audio
- added sdhms for battery stats
- face unlock removed for stability
Changelog v0.5:
- Added Samsung camera ui5
- Unlocked all cameras in Night mode
- Fingerprint fixed
- Audio fixes
- More minor change
Changelog v0.7
- Updated to new base S901BXXU2BVKB
- Security patch November 2022
- New integrated CSC (Asia + Europe)
- Using full S22 Oneui5 Samsung Camera
- Wide camera disabled in samsung cam
- Updated audio effects from s22
- New audio policy from s22
- Added fix for bt calls from @xnavis
- bt media still ded
- Some apps moved to user apps to save space
- Photo Editor Fixed
- Object Remover from S22 enabled & working
- Added NFC support
- Switched to dtb5
- Using complete aosp partition entries as in eureka.
Changelog v1.0:
- Updated base to S901BXXU2BVL1
- Security Patch 01 December 2022
- Internal tuning
- Graphics improved
- Switched to A51 CSC
- Auto Brightness Fixed
- FOD removed
- AOD unlocked
- AR Camera fixed
- Screen Recorder fix
- Partial fixes for DEX
- Secure Folder Patch
- BT Library Patched
- BT Media and Calls fixed
- More Camera fixups
- Fixed overnight battery drain
- Added headphone fix @xnavis
- Added Voice Focus @GalaxyA51user
Hotfix for v1.0
- Resolves the screenshot issue
Changelog v1.1
- SELinux fixes
- Dex Fixed
- WiFi hal updated
- Switched to aroma installer
- RAW support in Samsung camera
- Unlock uw camera in pro mode
- Some camera modes fixed
- Enabled Motion Photo
- Kernel upgraded to r11 final
- Optional kernels R8 enforcing R9 enforcing R11 permissive
Changelog v2.0
- New Oneui5.1
- Updated to S901BXXU3CWAI
- Security Patch updated
- Bixby added
- S22 and S23 Wallpapers combined
- Audio workaround removed
Changelog v2.1
- GPS fixed
- Quality of Wallpapers enhanced
- Patches for Secure folder
- Added applock @mujammilk_476
- Added camera assistant @GalaxyA51user
- Add R11 Enforcing (lazy)
- Revert to A51 csc
- Added debloat list from @slorixsh
- Added debloat list from @KudretP
- Chrome Audio fix up
Changelog v2.2 beta
- Base updated to S901BXXU3CWBE
- Security update March 2023
- Fixes for widevine L1 (untested)
- Fixed dual speaker mod
- Update menu for debloat
Changelog v3.0 beta
- !! fstab changed. Use Eureka fstab in mods to avoid data format
- Added band selector @FlorinelulX123
- Some more csc tweaks from @GalaxyA51user
- Fixed move App to Sdcard issue
- Fixed testing codes issue
- Fixes for Screen Record issue
- AV1 Decoding Support
- More Codec fixes
- Slightly Aggressive lmk
- Re-tuned Behaviour
Changelog v3.1
- Base updated to S901BXXU4CWCG
- Security patch April 2023
- Revert fstab changes (now Uses Eureka fstab by default)
- Magisk updated to v26.1
- Gpuwatch fixed
- DEX experience improved
- Fix wallpaper issue
- Fix a GPU throttling issue. For reporting @kudretP
- Added Dailyboard @GalaxyA51user
- Added some knox apps
- Photo clipper added by Samsung
- Overhaul audio, report any weird bugs
- Product is now Read only to preserve space
Changelog v3.2
- Fixed Secure Folder issue
- Some more Securities Disabled
Downloads:
Spoiler: Download
Do a brief reading of Installation Notes above before proceeding!
V2.1B
Google Drive : Click Here
Mega : Click Here
V3.2
Direct : Click Here
Mega : Click Here
Credits:
@kevios12 & @FlorinelulX
@Chatur27 & @Royna For Eureka Kernel
@TBM 13 for his RAW Capture libs
@ianmacd for multidisabler
@ricci206 for Secure Folder patch
@MrWaehere for CRB Kitchen
@amarullz for Aroma Installer
@GalaxyA51user for Tweaks
@mojave0 (github) for Aroma theme
@xnavis (telegram) for helping with patches
missing someone? dm me
ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
Release Date: 20-04-2023
Last Updated 20-04-2023
FEATHER PROJECT M12 T
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Features:
Based on M127FXXU4DWC4
Security Patch March 2023
OneUI 5.1 - Android 13
Eureka Kernel R11
Enforcing Selinux
Magisk V-25.2
FM Radio
S22 + S23 Wallpapers
Edge Panel
Disabled FRP
VoLTE & VoWiFi
Bluetooth Calls
Flagship animations
Samsung Dex
Dolby Atmos
Enhanced GPS
AppLock
A13 Colour Palette
Secure folder pre-patched
BT lib pre-patched
OneUI5 Apps
WiFi Sharing
Why M12 ? :
Netflix Widevine L1
Signature Verification Nuked
Working FM Radio
Better Ram Management
Bugs:
Safetynet with root only
Face Unlock
Low light Photos
Moving Apps to Sdcard
Installation:
Spoiler: Installation
Installation Procedure:
Preferred Recovery: Latest TWRP
1. Make a Backup of EFS and all your important data
2. Start by wiping System,Vendor,Product,Data,Cache, Dalvik-Cache
3. Reboot to Recovery
4. Read carefully and select Wisely in Aroma Installer
5. Reboot to System
6. Install Magisk apk normally in the system
7. Update Android System Webview from Play Store by searching it
7. Enjoy
Changelog:
Spoiler: Changelog
V2.0
- Base updated to M127FXXU4DWC4
- Security Patch March 2023
- Fixed Game Tools
- Fixed Blue Light Filter
- Fixed Extra Dim
- Some Camera Issues fixed @duhansysl
- Magisk Updated to v26.1
- Full GCAM Pre Installed
- Camera RAW support enabled
- better gaming @slorixsh
- Added R11 Enforcing
- S22 + S23 Wallpapers
- Spotify Audio issue resolved
- Fix Wired headphones issue
- Added option to Disable Extended Brightness
- Added optional Light LMK
- Added Object Eraser
- Added Reflection Remover
- Added Object Clipper
- Fixed Fingerprint issue
V2.1
- Fixes for AppLock
- Camera improved
- Sleep App Function fixed
- Minor Fixes
Downloads:
Spoiler: Download
Do a brief reading of Installation Notes above before proceeding!
V2.1
Gdrive: Click here
Credits:
@kevios12 & @FlorinelulX
@Chatur27 & @Royna For Eureka Kernel
@TBM 13 for his RAW Capture libs
@ianmacd for multidisabler
@ricci206 for Secure Folder patch
@MrWaehere for CRB Kitchen
@amarullz for Aroma Installer
@GalaxyA51user for Tweaks
@mojave0 (github) for Aroma theme
@xnavis (telegram) for helping with patches
missing someone? dm me
ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
Release Date: 12-04-2023
Last Updated 12-04-2023
This rom is soo good, thanks raptor!
This ROM is beautiful (Talking about S22 port). I'm a developer and test apps on A20, would it be possible if you add KLMS and other Knox Related stock apps please? I need knox license activation only. (I know rooting breaks knox but the KLMS agent etc they do work while being rooted. I'm using all of that stuff on my rooted S21 FE and they work fine).
Edit: As my S21 FE is also Android 13, I will try to copy all Knox related stuff into this and check !
zubair1836 said:
if you add KLMS and other Knox Related stock apps please? I need knox license activation only.
Click to expand...
Click to collapse
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
RiskyEagle said:
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
Click to expand...
Click to collapse
Thanks for quick reply. I'd prepare the list.
For now, I've manually copied the files as I said and it worked but when I restarted the phone. It locked me "Phone Locked, Authorization needed" and there was no way out.
I've wiped everything again and flashed again (this time with my original CSC because I think that could have caused that).
I'll get back to you after checking out everything.
RiskyEagle said:
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
Click to expand...
Click to collapse
It's strange that flashing a different CSC locks the phone.
Anyways, The required files are the folders names as KLMSAgent, KnoxCore, KnoxPushManager,knoxvpnproxyhandler and KPECore.
They should be at /system/priv-app/
For now, I've made it work. But it'd be lovely if you include them in next update.
Many thanks for this Beauty
This is a realy nice ROM. Great work !!! Would it be possible to add Samsung stock Radio app?
Trying this new rom, so one question is possible add more buttons like download mod, recovery mod in turn off menu?
Amazing Rom!
does it work for A207F ?
zubair1836 said:
Anyways, The required files are the folders names as KLMSAgent, KnoxCore, KnoxPushManager,knoxvpnproxyhandler and KPECore.
They should be at /system/priv-app/
For now, I've made it work. But it'd be lovely if you include them in next update.
Click to expand...
Click to collapse
The required files are now optional in aroma. Selecting the option will remove the knox apps.
Please do notify me about your experience.
Version Update v3.2
Major Changes:
- Added Dailyboard
- Added Object Clipper Feature
- GPU Watch fixed
- April 2023 Security Patch
Downloads are updated in the main post
RiskyEagle said:
Version Update v3.2
Major Changes:
- Added Dailyboard
- Added Object Clipper Feature
- GPU Watch fixed
- April 2023 Security Patch
Downloads are updated in the main post
Click to expand...
Click to collapse
Thanks for the Knox stuff as well.
Dirty flash possible?
BasitQayyum said:
does it work for A207F ?
Click to expand...
Click to collapse
A20s is not supported
lux070 said:
This is a realy nice ROM. Great work !!! Would it be possible to add Samsung stock Radio app?
Click to expand...
Click to collapse
Stock Radio is not available in this version due S22 not supporting it.
btw Radio is available in a51 and m12 oneui5 port. Currently only at telegram for beta testing
Eliather said:
Trying this new rom, so one question is possible add more buttons like download mod, recovery mod in turn off menu?
Click to expand...
Click to collapse
I would add those but they make the system less responsive on this low end device. Also a hassle to provide security updates.
zubair1836 said:
Thanks for the Knox stuff as well.
Dirty flash possible?
Click to expand...
Click to collapse
Dirty Flash should be possible, but do a clean flash if you face bugs.
Also do take a look at installation procedure as it is also updated
Does Samsung A20e is supported ?
Fury_Craft said:
Does Samsung A20e is supported ?
Click to expand...
Click to collapse
If any a20e user is available for testing, We can add support for it.
RiskyEagle said:
If any a20e user is available for testing, We can add support for it.
Click to expand...
Click to collapse
Hi I have the a20e for testing thanks