Looks like Cafebabe is going to add LOS 19.1 support for our 3s!
hudson: Ship Mi8917 & Mi8937 & Mi439 with lineage-19.1 · LineageOS/[email protected]
Change-Id: Icd37c6dc4fc5807cf07047c5b05379808feb0d4c
github.com
Update: Builds are out for LOS 19.1 and 20 - https://download.lineageos.org/Mi8937
Thanks to Cafebabe and the work others have done in the past like nichcream and sairam to get to this point!
Will probably give this a try in about a month or so.
I've just flashed LOS 20 on my Redmi Note 5A right after it's out. (It's the same Mi8937 as Redmi 3S.)
It's great! It's amazing to have Android 13 running on a so aged device! Not a single problem so far!
The only pity is that I cannot disable hardware buttons and enable gesture control.
I know maintainers are busy, but where could I ask Mr. Cafebabe for a feature request? I'm really begging for this, as I'm so used to gestures now.
wren945 said:
The only pity is that I cannot disable hardware buttons and enable gesture control.
Click to expand...
Click to collapse
You might need to disable hardware buttons via build props with a Magisk module. See https://libreddit.pussthecat.org/r/LineageOS/comments/rivta7/how_to_disable_hardware_buttons/. This would enable softkeys. Then, you can try the info in this thread: https://forum.xda-developers.com/t/solved-oneplus-back-gestures-on-pixel-7-pro.4506607/.
Thanks a lot for the information! I'll give it a try. May I ask, if later I want to use the OTA to update to new versions of LOS and want to keep gesture control, do I have to this every time?
aospray said:
You might need to disable hardware buttons via build props with a Magisk module. See https://libreddit.pussthecat.org/r/LineageOS/comments/rivta7/how_to_disable_hardware_buttons/. This would enable softkeys. Then, you can try the info in this thread: https://forum.xda-developers.com/t/solved-oneplus-back-gestures-on-pixel-7-pro.4506607/.
Click to expand...
Click to collapse
Using Magisk to disable the hardware buttons should work and persist through OTA updates.
Cheers for the information.
I've installed LOS20=A13 but have the following problem:
VoLTE does not work for me!
In SIM-Status and with *#*#4636#*#* I can see that the data SIM says Voice=LTE, but calling to and from takes forever (5-10 secs) and thus is not VoLTE. (The same SIM-card works in a RedMiNote4x and LOS19 without a hitch...
What are your experiences concerning VoLTE and mido+LOS20?
Curious!
Cheers, raimerik
Related
Hello there,
while I'm more than happy and satisfied with the latest builds and what this Rom already provides I'd really love to see any form of Pie in settings.
Could it be possible to get either the old 4.3 pie source from PA and use it here or the slim version?
Thank you in advance!
Edit :I've used and loved LMT but it's simply not the same.
Edit 2: I know about navigation ring, not the same.
Edit 3: It's said that 4.4 version is already out/open source.. haven't actually found it that's why I suggested the older version.
SlimPie is coming http://review.pac-rom.com/#/c/1220/
You just need to wait a little longer
bud77 said:
SlimPie is coming http://review.pac-rom.com/#/c/1220/
You just need to wait a little longer
Click to expand...
Click to collapse
I cannot believe I missed that :-\
Been a huge fan of Pie back in the old days!
Thank you for the info, will wait patiently!
Update : Tried PIE with Gravity Box xposed module and halo with xfloating notifications etc and to be honest I'm more than happy with what I have!
_Sofos_ said:
Update : Tried PIE with Gravity Box xposed module and halo with xfloating notifications etc and to be honest I'm more than happy with what I have!
Click to expand...
Click to collapse
Using Xposed me no more ART.
SlimPIE is still under review.
i want apple PIE too, please bring in soon,
And PIE got abandoned!
http://review.pac-rom.com/#/c/1220/
PAC without PIE, missing most prominent feature of ParanoidAndroid.
neobuddy89 said:
And PIE got abandoned!
http://review.pac-rom.com/#/c/1220/
PAC without PIE, missing most prominent feature of ParanoidAndroid.
Click to expand...
Click to collapse
Or Halo. Or Per App Fonts. Or Hybrid Mode. Or DPI Selector. Or Native Window Support. We have nothing from PA.
Right now PA has Peek And some iteration of Active Display. They are rebuilding almost from scratch.
I personally like LMT, it's crippled me in regards to working without it.
I created this simple module at the request of a friend.
It disables the double tap to like feature of Instagram to prevent accidental liking.
A similar module for this was created before, however, the dev hasn't updated it in over a month.
Download:
http://repo.xposed.info/module/com.akif.instagram.disabledt2l
any issues, please post them here. I will keep this app updated.
To-do:
- add GUI w/ dialog option
will try this, i hope this resolve instalike module that no update till now.
@Akif97
Yes it work, but it does not have notification like InstaLike (do yo want to like this "yes" / "no"?)
If there's a high enough demand for it I'll add it soon.
I thought that option was rarely used, lol
Akif97 said:
If there's a high enough demand for it I'll add it soon.
I thought that option was rarely used, lol
Click to expand...
Click to collapse
Add it please, + add icon + UI also, so we can configure it.
Nice work! hope you add the ask for like popup thingy
Seems like it doesn't work for me. Cataclysm (5.1.1), Instagram 7.9.0 (build 15997156)
I've updated it for 7.9.0 and it'll be on Xposed soon
I'll add the UI and dialog next update
Thank you?. Whether it's possible to make a universal module, so it's not necessary to make fixes after every Instagram update?
dniwe1337 said:
Thank you. Whether it's possible to make a universal module, so it's not necessary to make fixes after every Instagram update?
Click to expand...
Click to collapse
Not possible, the only suggestion I can give is to disable auto updating for Instagram and only update until the module is updated
This is awesome. Does it work on lollipop?
Gibz97 said:
This is awesome. Does it work on lollipop?
Click to expand...
Click to collapse
yeah, should work on any ROM with Xposed
I'm here because I saw it there first. Great module and thank you.
@Akif97 Broken on 7.11.1
@Akif97 Update pls, broken on 7.12.1 final google play
@Akif97 broken on 7.13.1 , pls update!
Can you please update it for 7.13.1?
any plans to make it work with latest instagram? v7.15.x ?
bump for updating the module for v7.16.x
dead?
Samsung Pixel Experience PBy CodeFox & OpenSauce9810
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimised as much as possible for our Samsung Devices. This is what differentiates this rom from the one you can find in the Project Treble Forum. I also plan to provide regular updates and improvements very frequently. I'm aiming for weekly if not more.
Why not Rainbow_Dash?
We're a part of the same team and he's taking a break from developing for the moment, so I'm going to do my best to support you with regular updates and support where possible. So his previous version should be considered redundant.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
Flash the ARH6 Vendor Image to your Vendor Partion from TWRP (Press the Install Image button at the bottom right of where you usually select a flashable zip)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
What's different to the PE in project treble forum?
Smoother UI Performance Fixes
Debloated unneccessary libs from other devices
Vibration Motor has been corrected (it's too powerful in GSI)
Regular Maintenance / Builds & Support
Changelog:
30.11.2018 - Initial XDA Release & Unofficial rollout.
01.12.2018
Animation integers corrected to be smoother
Black boot-animation added, no more being blinded by the boot animation
Pixel Live Wallpapers included
High Resolution default wallpaper added
09.12.2018 (Now maintained by @malinathani
Made system ui a hella smoother compared to before
Face unlock works
Phh settings removed. All samsung options should now be persistent.
14.12.2018
-Fixed fingerprint on note 9, should work now with almost any vendor so get the latest one
-Almost everything works now
Downloads:
ARH6 Vendor
System Image
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
XDA:DevDB Information
[Discontinued]Pixel Experience P[UNOFFICIAL][14.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy Note 9
Contributors
CodeFox, Rainbow_Dash, malinathani, Mohammed Nathani, Ivan Meler, Pixel Experience Team, phhusson
Source Code: https://github.com/PixelExperience
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: ARH6 Vendor
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2018-11-30
Created 2018-11-30
Last Updated 2019-01-07
So nice I'm on the 7 days jail but a soon I get out I definitely will install this amazing Rom ... thanks for share your work with us ? keep going
Thanks but still fingerprints doesn’t work
Sent from my iPhone using Tapatalk
---------- Post added at 11:38 PM ---------- Previous post was at 11:33 PM ----------
azooooooooo said:
Thanks but still fingerprints doesn’t work
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Edit o just add my fingerprint again and it works. Thanks
Sent from my iPhone using Tapatalk
I notice that you haven't added known issues to the op? Are you waiting on further testing? Would be useful to have.
Thank you for the rom btw. And thanks to the entire opensauce9810 team. Very much appreciated
MANY THANKS, rom looks awesome!! My screen brightness is set to 100% however it looks like it is on 15% I can hardly see stuff on my screen, is there a way to increase brightness with build prop or something?
UPDATE
Never mind established it was the universal ctsprofile: false that I installed
zoltain73 said:
MANY THANKS, rom looks awesome!! My screen brightness is set to 100% however it looks like it is on 15% I can hardly see stuff on my screen, is there a way to increase brightness with build prop or something?
UPDATE
Never mind established it was the universal ctsprofile: false that I installed
Click to expand...
Click to collapse
You need to enable the extended brightness range in phh settings too under Samsung. Will let your screen go brighter
CodeFox said:
You need to enable the extended brightness range in phh settings too under Samsung. Will let your screen go brighter
Click to expand...
Click to collapse
Thanks is there a way to pass ctsProfile in magisk? It remains falls.
Since my Note 9 is still on it's way and I'm on a S9 now I have a simple question.
In 8.1 AOSP ROM's IMS services and the Iris scanner don't work. Do they work on this ROM? And if Iris scanner doesn't work, can we still use biometric unlocking? I hate fingerprint scanner so on the rear as I use wallet cases and can't easily reach it.
I believe smart lock face unlock does not work. I added my face to it but I'm unable to 'improve face matching'. It simply says cannot start finding your face. And nothing happens when I try to unlock my phone using face unlock either.
Other than that, the typing feels a bit slower than stock Samsung roms. Not sure if it's the touch response or what. I disabled the haptic feedback for the keyboard but it still seems a bit slower. Could be just me though..
Apart from these issues, rom is definitely a daily driver so hats off to the entire team
zoltain73 said:
Thanks is there a way to pass ctsProfile in magisk? It remains falls.
Click to expand...
Click to collapse
Download hideprops in Magisk downloads. Reboot to initialise it. then download a terminal emulator from the playstore and type the command "props" without the quotes.
Grant SU to the terminal
then pick edit fingerprint. Select Samsung, and choose the s9+ fingerprint (number 22 I think). Reboot and then CTS will pass.
Imprezzion said:
Since my Note 9 is still on it's way and I'm on a S9 now I have a simple question.
In 8.1 AOSP ROM's IMS services and the Iris scanner don't work. Do they work on this ROM? And if Iris scanner doesn't work, can we still use biometric unlocking? I hate fingerprint scanner so on the rear as I use wallet cases and can't easily reach it.
Click to expand...
Click to collapse
Iris Scanner will never work in an AOSP Rom. The libs are proprietary to Samsung experience roms.
Nasty_z said:
I believe smart lock face unlock does not work. I added my face to it but I'm unable to 'improve face matching'. It simply says cannot start finding your face. And nothing happens when I try to unlock my phone using face unlock either.
Other than that, the typing feels a bit slower than stock Samsung roms. Not sure if it's the touch response or what. I disabled the haptic feedback for the keyboard but it still seems a bit slower. Could be just me though..
Apart from these issues, rom is definitely a daily driver so hats off to the entire team
Click to expand...
Click to collapse
Yeah it's a little quirk with GSI's unfortunatley. The vibration motor causes somewhat of a delay when typing. Turning off haptic feedback completely seems to make it normal for me. I've gotten used to typing without haptic feedback now haha.
CodeFox said:
Yeah it's a little quirk with GSI's unfortunatley. The vibration motor causes somewhat of a delay when typing. Turning off haptic feedback completely seems to make it normal for me. I've gotten used to typing without haptic feedback now haha.
Click to expand...
Click to collapse
I noticed that you mentioned in the OP that you use Galaxy wear?
A bit OT but is there a way to use the Gear with different roms without having the Gear being reset every time? It just seems to get reset every time I pair with it on a new rom.
Nasty_z said:
I noticed that you mentioned in the OP that you use Galaxy wear?
A bit OT but is there a way to use the Gear with different roms without having the Gear being reset every time? It just seems to get reset every time I pair with it on a new rom.
Click to expand...
Click to collapse
I wish there was, I'm so sick of having to reset it I literally use my watch just as a watch most of the time because I'm flashing new builds so often. It's a pain in the neck and I don't know why Samsung did it this way, it's frustrating.
Hi #CodeFox thanks for your work I want to ask you something, I know that the answer will be absolutely no but I loved to give it a try
Can you please make a pixel experience p ROM for Samsung galaxy j4
Awesome
Can't wait to try this
New Build Uploaded. See OP for details.
CodeFox said:
Download hideprops in Magisk downloads. Reboot to initialise it. then download a terminal emulator from the playstore and type the command "props" without the quotes.
Grant SU to the terminal
then pick edit fingerprint. Select Samsung, and choose the s9+ fingerprint (number 22 I think). Reboot and then CTS will pass.
Click to expand...
Click to collapse
MANY THANKS, worked like a dream and passed!
Hi all,
Will Dolby atmos work?
Hi there,
great ROM. Flashed it today and so far everything looks very good.
Just tried out the camera and found a weird bug:
When taking videos (front and back camera), the screen flashes green about every second during recording. The video itself is not affected.
Seems to happen for every camera app.
Any way to fix this?
How to remove navigation bar (three button) in Android 11. NOTE: Root is required to use this method!
Hi guys! Please either move or remove this thread if it's either in the wrong place or covered by another thread. This thread is intended to walk through removing the three-button navigation bar in Android 11 since the traditional way ('wm overscan') doesn't work anymore.
This is useful for if you want to use an alternative gesture system, such as Fluid Navigation Gestures (FNG). Before you get started with the below, be sure you have enabled the replacement system first. FNG's built in navbar disabler doesn't work on Android 11, so you don't need to have this switched on.
Assuming you have root already (there should be plenty of tutorials available to help you out on this), all you really need to do is download Substratum Lite and nonavbar.apk (available at: https://1drv.ms/u/s!AsqLR2yZd3fMiaV4fcCSAw7trgl8AQ?e=e9ncai). Choose to install nonavbar.apk, then it should show up as a theme in 'lite'. After pressing the NoNavBar theme, you should see 'Android System (android [11])' to the left of a checkbox. After checking this box, press the '1 SELECTED' button on the bottom right. Then, press 'Install selected', restart, and get back to this screen to finally 'Enable selected'.
See for screenshots: https://photos.app.goo.gl/HL48xhsZMPMkmcdV7
And at that, you should have your replacement gestures as your primary input now! Enjoy!
I'm by no means an expert, so my ability to help with questions is limited. Hope this helps!
Works perfectly on OP8 Pro with latest Android 11 update. Thanks a lot.
I would appreciate if there is the way to completely
hide status bar in android 11 with "no display cutout magisk module".
Been searching this for awhile now. Thanks for the solution, works great
Amazing! Thanks so much for looking into this, was very torn away when I couldn't disable nav bars given I used immersion mode with FNG on Android 10. Tried this on android 11 and it worked. Actually for Galaxy OneUI devices I don't need to be rooted.
You can just use the substratum lite and install synergy - OneUI compiler app. It will apply the modifications on a built in OneUI theme.
Question; how did you find or created that nonavapp.apk?
Since android 11 came out and google pulled that overscan crap, I have been scouring the net for a solution to use FNG. Thank you. Thank you. Thank you.
As the creator of the Fullscreen/Immersive gestures module, I'll just say, thanks for offering users the ability to use their favorite alternative navigation methods on Android 11
It's really unfortunate that people have to be either forced to use Android's standard navigation gestures (which quite a few people dislike) or an impossible to be hidden 3 button navbar (due to the removal of Overscan)
Keep up the good work
On Pixel 5, after enabling NoNavBar, there's a delay when switching between camera modes. It goes from 1 sec without it enabled to almost 5 second after enabling it
Works perfectly fine on my 7T Pro running OOS Beta 1! Thanks!
Works on great on mi A3! Thanks a lot!
Works great, but, could you possibly build it for the "normal" substratum?
Thanks a lot
Excellent work!
I was looking for a solution to this problem with FNG.
Now, If I can say something about this, in my case, the Home Gesture (Swipe Up) dindt work. I reboot the phone and nothing happened. After some minutes, I decided to try this:
Configuration > Adittional Settings > Full Screen Display > Activate the option "Full Screen Gestures".
This way, I could to use the Swipe Up gesture.
To finish, I would like to know what to do to undo all this configuration when I decide not use FNG anymore. I'd really appreciate it.
NOTE: I have a xiaomi phone (MI 9).
Substratum lite is free, but it requires another app called synergy (it's just $2, but it's annoying to have to pay for it). haha
Either way, this tutorial worked very well for my galaxy s10+, so that I could use FNG instead of the new navigation bar from android 11 (the new navigation bar is pretty good actually, but it's annoying as hell that it didn't let me disable the Google Assistant shortcut that is activated by holding the mid button). Thank you for this solution!
Thanks for this apk. I used to use XDA navigation gestures a lot on A10. Which I really miss a lot on Note 20 OneUi 3.1. so question is can I use this on a non rooted OneUi 3 with synergy and substratum lite?
hi, does anyone tried it on ONEPLUS 8 ?
thanks
giusmobile said:
hi, does anyone tried it on ONEPLUS 8 ?
thanks
Click to expand...
Click to collapse
This works perfectly on my OnePlus 8T on Android 11, so it should work the same on OP8.
Thank you so much @Veiran for sharing with us, it has been many months that a lot of us were searching for the solution. I didn't know that this was posted back then in Nov 2020, but I am glad to find it today!
Is the source code open for this?
giusmobile said:
hi, does anyone tried it on ONEPLUS 8 ?
thanks
Click to expand...
Click to collapse
Yes i am on the current stock rom and its working great on my Oneplus 8
The provided link to the nonavbar.apk does not work anymore. Can someone share this apk with me?
Link is working.
@Fr1day_13 - thanks. I tried it under windows and it works, but not under Android. My fault!
Has anyone updated to ColorOS13? I am loving the phone, but the layout limit of 5x5 is killing me. Also because you have to have the same home screen on both screens it the biggest inconvenience.
I hope they have changed that in the new ColorOs, so I'm just wondering to hear from anyone who has updated.
Also please advise whether VoLTE works again.
Just bought my Find N - such an awesome phone, it's a shame that VoLTE is disabled on recent updates.
I am also looking for Volte Support on oppo find N
Color OS 13 Update was made available to me via the Beta trial notification tonight (Nov.9 2022).
Downloading as we speak. You all should check your device update via the Trial.
No different layout
No VolTe
sorry
miciobigio67 said:
No different layout
No VolTe
sorry
Click to expand...
Click to collapse
Thanks too bad. Sucks.
VolTE was enabled under my carrier. Before that option wasn't there.