How can I enter in fastboot mode using a usb without recovery mode in Infinix Hot 11? My boot.img are deleted so i can't enter in recovery, and my phone its in a bootloop because that. Helppppp
rael7979 said:
How can I enter in fastboot mode using a usb without recovery mode in Infinix Hot 11? My boot.img are deleted so i can't enter in recovery, and my phone its in a bootloop because that. Helppppp
Click to expand...
Click to collapse
try button combinations.
Force reboot then try various button combinations of power button and volume buttons
Related
I just officialy unlocked my bootloader because I Can't enter EDL mode somehow. Tried everything, EDL scripts, adb, holding the volume buttons...
The phone always restart the the system (it works fine). This is weird because I can't do factory reset either, it always boots back into my system.
Can somebody help me in this?
If you have an unlocked bootloader, why do you need to go to EDL mode instead just use fastboot.
Care to explain better?
The issue is: I flashed TWRP with fastboot. When I try to boot into it (Holding Volume up + power) i just get back into system.
This is just weird, as I can't do a Factory Reset either!
Download edl7.zip file from xda thread and go into fastboot mode and double tap on cmd file...your device will go in edl mode (red led blink)
Zerei said:
Care to explain better?
The issue is: I flashed TWRP with fastboot. When I try to boot into it (Holding Volume up + power) i just get back into system.
This is just weird, as I can't do a Factory Reset either!
Click to expand...
Click to collapse
EDL is for flashing fastboot files for locked bootloader as flashing through fastboot doesn't work. If your bootloader is unlocked you can just use fastboot. For TWRP are you getting any error while flashing it, if not you should boot into TWRP by holding volume down and power button with your phone turned off.
harishmenace said:
EDL is for flashing fastboot files for locked bootloader as flashing through fastboot doesn't work. If your bootloader is unlocked you can just use fastboot. For TWRP are you getting any error while flashing it, if not you should boot into TWRP by holding volume down and power button with your phone turned off.
Click to expand...
Click to collapse
Hey man. Thank you for your help. But I think that I'm not being clear on what my issue is. I have some experience on flashing twrp and rooting. But never faced something like this before.
I can't even do a factory reset (from the settings menu) as the phone restarts and just goes back to the system. I flashed twrp but when I try to boot into it I get back to the system. I try to reboot into bootloader via the update menu and the phone resets and just get back to system.
It's just as if I can't acess the bootloader menu at all.
That never happened, try holding volume button before pressing power button. You can also try it through adb, make sure you have usb debugging turned on. For fastboot use adb reboot bootloader and for recovery adb reboot recovery
harishmenace said:
That never happened, try holding volume button before pressing power button. You can also try it through adb, make sure you have usb debugging turned on. For fastboot use adb reboot bootloader and for recovery adb reboot recovery
Click to expand...
Click to collapse
Yeah, tried that too. This is just way too weird to be normal. I'm sure that I did everything right.
Hello,
i have just flashed the cm13 rom but I stuck in a "Just a sec..." window during the first registration. Now I wanted to reflash the rom but i can not enter the recovery. If i hold volume up and power it just stuck at the mi logo. At least i can enter fastboot. Is there anything i can do?
Before it was possible to enter recovery via adb.
What should i do?
domina said:
Hello,
i have just flashed the cm13 rom but I stuck in a "Just a sec..." window during the first registration. Now I wanted to reflash the rom but i can not enter the recovery. If i hold volume up and power it just stuck at the mi logo. At least i can enter fastboot. Is there anything i can do?
Before it was possible to enter recovery via adb.
What should i do?
Click to expand...
Click to collapse
Perfectly matched with my case.
I'm entering Recovery mode by reinstall the TWRP under fastboot.
Could you try the process of installing your Custom Recovery under fastboot?
domina said:
Hello,
i have just flashed the cm13 rom but I stuck in a "Just a sec..." window during the first registration. Now I wanted to reflash the rom but i can not enter the recovery. If i hold volume up and power it just stuck at the mi logo. At least i can enter fastboot. Is there anything i can do?
Before it was possible to enter recovery via adb.
What should i do?
Click to expand...
Click to collapse
padiyes said:
Perfectly matched with my case.
I'm entering Recovery mode by reinstall the TWRP under fastboot.
Could you try the process of installing your Custom Recovery under fastboot?
Click to expand...
Click to collapse
if you are in cm then you have to press volume up and volume down+ power button untill it takes you to twrp recovery.hope you get what i mean
sir I tried to use the 64x and also x86 TWRP recovery image on my lenovo p70 android 5.1 and flash it using flashify and also using mobileuncle tools. Even rebooted it, upon instruction., but nothing happens...
I am unable to access recovery mode. Just vibrates and sleep's, and again vibrates and sleep.Now I switch off my phone and boot in recovery mode (Volume up+ power button) but it never boot in TWRP recovery mode the same thing happens.
Kindly help me with this.
srkumar1008 said:
sir I tried to use the 64x and also x86 TWRP recovery image on my lenovo p70 android 5.1 and flash it using flashify and also using mobileuncle tools. Even rebooted it, upon instruction., but nothing happens...
I am unable to access recovery mode. Just vibrates and sleep's, and again vibrates and sleep.Now I switch off my phone and boot in recovery mode (Volume up+ power button) but it never boot in TWRP recovery mode the same thing happens.
Kindly help me with this.
Click to expand...
Click to collapse
Is your bootloader is unlocked.
Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
power off the phone, put USB port in phone, press volume down key, now connect USB port to PC with volume down key press. it should boot to fastboot.
Rob1hn said:
Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
Click to expand...
Click to collapse
Try this command
Code:
adb reboot fastboot
miststudent2011 said:
Try this command
Code:
adb reboot fastboot
Click to expand...
Click to collapse
hi. Please, help, i cant reboot to fsstboot. If i do this from app or from adb my phone just reboots twice. I can boot into recovery and into download mode
Don't reboot into fastboot, boot into fastboot.
1st hold the up and down and power to start up so that it shows more than that "...is now booting". Then power off and press "down" and "power" with USB plugged to enter fastbboot. In fastbbot, flash the userdata.img and the cache.img (This cleans data and cache totally) from Huawei's updates, then you will be able to get into TWRP without being stucked.
How do you get into recovery mode? Running Android 10 Build QKQ1 and can't seem to access recovery mode through the power button and volume up combination.
Forgot the password, so can't reset the phone through Settings either.
try using PC with Minimal adb and fastboot
if anyone find any way to boot into recovery pleas reply