What can I attempt to hide root from 8 Ball Pool
I know for certain because as soon as I remove root, the game works. The following is what I have done to Hide Root:
1. Configured Denylist within Magisk hiding root from 8 Pool, Google Play Store, Google Play Services, Carrier services, and Android System
2. Installed the Modules MagiskHidePropsConf and Universal Safety Net Fix and set to enforce Denylist
3. Installed the Module Shamiko (and disabled enforce Denylist)
4. Installed the module LSPoded and installed Hide-My-Applist -> Activated Hide-My-Applist in LSPosed and set a whitelist rule preventing 8 Ball pool from seeing all Apps
All of the aforementioned steps did not work. So, I tried the following:
5. Installed Magisk Delta
6. Used Island/Shelter to create a work environment and cloned the app as a work app. Did not work. Interestingly enough, my Banking apps stopped detecting root at this point.
7. Froze Magisk before opening 8 Ball Pool using various different freezing apps
8. Installed VMOS Pro (Virtual machine) to see if it would run there. Crashed Immediately no matter the version of android within the virtual machine (ensured root was disabled within the settings)
8 Ball pool still detects root.
NOTE:
I cleared 8 Ball pool app data everytime before I attempted to open it and did the same for Google Play Services and Google Play Store.
I ensured that the root detecting apps such as RootBeer and Applist Detector Passed.
Same issue, tried using gbox and gspace both didn't work as well. The game digs really deep into the system to still be able to detect root even after multiple magisk masgisk modules. All my banking apps work without any issues and all other games work as well.
The game still works on V5.11.2
MuhannadYT said:
Same issue, tried using gbox and gspace both didn't work as well. The game digs really deep into the system to still be able to detect root even after multiple magisk masgisk modules. All my banking apps work without any issues and all other games work as well.
The game still works on V5.11.2
Click to expand...
Click to collapse
Yeah it works on 5.11.2 but there are a lot more hackers there which is why I want to move to the next version
Any luck?
Still any update yet?
the game have been updated to 5.12.3 and still no answer to this question
Many cheaters that are using cheeto or similar hack since past 2-3 years will again start using them and ruin the game's experience for everyone.
So even if someone finds out a way to bypass the root check they won't share or I would say should not share.
maxs8007 said:
Many cheaters that are using cheeto or similar hack since past 2-3 years will again start using them and ruin the game's experience for everyone.
So even if someone finds out a way to bypass the root check they won't share or I would say should not share.
Click to expand...
Click to collapse
Do u know that the auto play cheat and most of the cheats for 8bp doesn't require root by any means ?!
i don't cheat but i kinda looked up this matter
and btw i found a way to to bypass root detection for 8bp latest update :")
Mu7am3D said:
Do u know that the auto play cheat and most of the cheats for 8bp doesn't require root by any means ?!
i don't cheat but i kinda looked up this matter
and btw i found a way to to bypass root detection for 8bp latest update :")
Click to expand...
Click to collapse
Do you mind sharing the steps to hide root detection in latest version?.
OMG. I've tried installing so many ROMs thinking this was a ROM issue..
I found this post thankfully..
So yeah, update me on how to bypass please
shazee666 said:
OMG. I've tried installing so many ROMs thinking this was a ROM issue..
I found this post thankfully..
So yeah, update me on how to bypass please
Click to expand...
Click to collapse
maxs8007 said:
Many cheaters that are using cheeto or similar hack since past 2-3 years will again start using them and ruin the game's experience for everyone.
So even if someone finds out a way to bypass the root check they won't share or I would say should not share.
Click to expand...
Click to collapse
eslam.essa.2011 said:
the game have been updated to 5.12.3 and still no answer to this question
Click to expand...
Click to collapse
You can fix the problem by switching to magisk alpha it's basically the same magisk but better
arsalturtle891 said:
What can I attempt to hide root from 8 Ball Pool
I know for certain because as soon as I remove root, the game works. The following is what I have done to Hide Root:
1. Configured Denylist within Magisk hiding root from 8 Pool, Google Play Store, Google Play Services, Carrier services, and Android System
2. Installed the Modules MagiskHidePropsConf and Universal Safety Net Fix and set to enforce Denylist
3. Installed the Module Shamiko (and disabled enforce Denylist)
4. Installed the module LSPoded and installed Hide-My-Applist -> Activated Hide-My-Applist in LSPosed and set a whitelist rule preventing 8 Ball pool from seeing all Apps
All of the aforementioned steps did not work. So, I tried the following:
5. Installed Magisk Delta
6. Used Island/Shelter to create a work environment and cloned the app as a work app. Did not work. Interestingly enough, my Banking apps stopped detecting root at this point.
7. Froze Magisk before opening 8 Ball Pool using various different freezing apps
8. Installed VMOS Pro (Virtual machine) to see if it would run there. Crashed Immediately no matter the version of android within the virtual machine (ensured root was disabled within the settings)
8 Ball pool still detects root.
NOTE:
I cleared 8 Ball pool app data everytime before I attempted to open it and did the same for Google Play Services and Google Play Store.
I ensured that the root detecting apps such as RootBeer and Applist Detector Passed.
Click to expand...
Click to collapse
Hay una beta el 5.13.0_Beta1 lo instalas y con el universal safety funciona
Mod translation: There is a beta on 5.13.0_Beta1 you install it and with universal safety it works
Lramirez12 said:
Mod translation: There is a beta
Click to expand...
Click to collapse
Greetings, and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50
Lramirez12 said:
Hay una beta el 5.13.0_Beta1 lo instalas y con el universal safety funciona
Mod translation: There is a beta on 5.13.0_Beta1 you install it and with universal safety it works
Click to expand...
Click to collapse
Can confirm this works, but I'm unable to login with both facebook or google play and am forced to use a guest account. New to this so I'm unsure if that's intentional?
Swizzla said:
Can confirm this works, but I'm unable to login with both facebook or google play and am forced to use a guest account. New to this so I'm unsure if that's intentional?
Click to expand...
Click to collapse
I'm playing with my Facebook account. I wasn't able to open the game when I was using normal magisk but when I downloaded magisk alpha i can play it and I downloaded it from Google play. I think magisk alpha is much better at hiding even other apps that I couldn't open, now I can bypass their detection. And the cool thing is you can switch between the 2 magisk alpha and normal magisk by just pressing at the app you want to switch to. then pressing update then reboot without needing to flash using custom recovery.
bilz_ said:
I'm playing with my Facebook account. I wasn't able to open the game when I was using normal magisk but when I downloaded magisk alpha i can play it and I downloaded it from Google play. I think magisk alpha is much better at hiding even other apps that I couldn't open, now I can bypass their detection. And the cool thing is you can switch between the 2 magisk alpha and normal magisk by just pressing at the app you want to switch to. then pressing update then reboot without needing to flash using custom recovery.
Click to expand...
Click to collapse
I was talking about that 5.13 beta that was posted just above, it works but yeah, just logins are busted and I'm unsure if that's due to me having something in denylist or something unrelated.
Would also rather keep using the official magisk tbh.
Swizzla said:
I was talking about that 5.13 beta that was posted just above, it works but yeah, just logins are busted and I'm unsure if that's due to me having something in denylist or something unrelated.
Would also rather keep using the official magisk tbh.
Click to expand...
Click to collapse
Do you know how can I download the beta because I don't see any updates
arsalturtle891 said:
What can I attempt to hide root from 8 Ball Pool
I know for certain because as soon as I remove root, the game works. The following is what I have done to Hide Root:
1. Configured Denylist within Magisk hiding root from 8 Pool, Google Play Store, Google Play Services, Carrier services, and Android System
2. Installed the Modules MagiskHidePropsConf and Universal Safety Net Fix and set to enforce Denylist
3. Installed the Module Shamiko (and disabled enforce Denylist)
4. Installed the module LSPoded and installed Hide-My-Applist -> Activated Hide-My-Applist in LSPosed and set a whitelist rule preventing 8 Ball pool from seeing all Apps
All of the aforementioned steps did not work. So, I tried the following:
5. Installed Magisk Delta
6. Used Island/Shelter to create a work environment and cloned the app as a work app. Did not work. Interestingly enough, my Banking apps stopped detecting root at this point.
7. Froze Magisk before opening 8 Ball Pool using various different freezing apps
8. Installed VMOS Pro (Virtual machine) to see if it would run there. Crashed Immediately no matter the version of android within the virtual machine (ensured root was disabled within the settings)
8 Ball pool still detects root.
NOTE:
I cleared 8 Ball pool app data everytime before I attempted to open it and did the same for Google Play Services and Google Play Store.
I ensured that the root detecting apps such as RootBeer and Applist Detector Passed.
Click to expand...
Click to collapse
Maybe is detecting official Zygisk, try to use Magisk Alpha.
bilz_ said:
Do you know how can I download the beta because I don't see any updates
Click to expand...
Click to collapse
Lramirez12 said:
Hay una beta el 5.13.0_Beta1 lo instalas y con el universal safety funciona
Mod translation: There is a beta on 5.13.0_Beta1 you install it and with universal safety it works
Click to expand...
Click to collapse
this post
Lramirez12 said:
Hay una beta el 5.13.0_Beta1 lo instalas y con el universal safety funciona
Mod translation: There is a beta on 5.13.0_Beta1 you install it and with universal safety it works
Click to expand...
Click to collapse
- I've also tried so many way..magick, second space, parallel space, virtual android.. no one work!
Thanks man.. finally 2 month later, I've logged with miniclip id, Facebook didn't work for log in. hopefully next official update will working rooted device like beta;
Related
On Angler (Nexus 6p) I flashed the latest stock rom. (After a complete wipe) Afterwards I flashed TWRP and unzipped Magsik. Subsequently I did update to the latest version. After that I changed the packagename of Magsik manager. Furthermore I installed Xposed framework. Afterwards I enabled root hide for the TAN app:
https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.dkbpushtan&hl=en
This software is meant to give you the tan without using sms services.
Still, the app crashed right at the start without any error notification. Android Version is 8.1 and Magsik is v16. While I did the test, the bootloader was unlocked and TWRP was still the recovery. Can these two things affect the verification of the Banking app? I tried this several times ago in the past, but I was never to make this app running.
If anyone would be able to give helpful advice here, it would be very much appreciated.
Best,
scarline
I have heard that DKB Tan2Go does not work with newer Android versions like Oreo 8.1.x at all.
I can also confirm that. I tried it on a Sony cellphone. The cellphone was not rooted and with a completely new and 'clean' ROM. It was to no avail.
A friend has been forced to buy a chip reader. I am fortunate to be able to use normal TAN lists at the moment. If the DKB tries to exclude me from online banking, I will change the bank.
DKB Tan2Go seems to be one of the worst and most insecure apps ever. The reviews in Google PlayStore confirm this conclusion.
Maybe there will be a solution someday?
DKB TAN2go works with Magisk:
1. Install the TAN2go app (but don't open it)
2. Add the TAN2go app in Magsik Manager in the menu "Magisk Hide"
3. Reboot the phone (I don't know if this is necessary)
4. Open TAN2go, works fine.
**** DKB and this stupid security features which bring absoltuely no security.
That's exactly what I tried - without success. I read that it only worked with an old, obsolete version of Tan2Go. However, I could not find this version and I'm not sure if it still works at all. Did you have the latest version of Tan2Go from Google PlayStore? According to DKB, the recent Tan2Go does not work with devices that was once rooted or had a CustomROM. Even if you go back to stock the Root Counter changed and DKB Tan2Go will never work on this device. Unfortunately, I have to confirm that.
I am working on it to change the bank, because of that.
exaveal said:
DKB TAN2go works with Magisk:
**** DKB and this stupid security features which bring absoltuely no security.
Click to expand...
Click to collapse
Indeed!
Yes, I have installed the latests version of LineageOS, latest version von Magisk and the latests version of the TAN2go app.
I tried that to no avail. I heard once the root counter has a value other than 0, one can't go back. Probably it is also the Sony bootloader and it is different with other devices?
exaveal said:
Yes, I have installed the latests version of LineageOS, latest version von Magisk and the latests version of the TAN2go app.
Click to expand...
Click to collapse
I have a Xiomi Mi5 rooted with Magisk and Tan2go used to work for the last year or so. But yesterday I tried to make a transaction and BOOM! App crashed without an error message. Tried to use a newer Magisk, tried reinstalling the App, nothing helped.
The worst thing is that I do not know if some of my programs have a battery checker or a screen reader plugin that I am not aware of, or if Tan2Go suddenly detects my root. Regardless, crashing without an explanation is like the worst programming practice ever.
Since I do not need this kind of ****e in my life I will probably change Bank, I mean what good is an internet Bank if you cannot do transactions over your mobile device?
Well, willy-nilly I try to use the only other option from DKB: the German TAN Generator. Every other bank equips you with such a device, if they want you to use it. The DKB does not. Actually, I ordered the 3rd TAN Generator and fully paid for it. The first one drains the battery within days. The second one let me type in all the numbers and for no reason the TAN code does not show up on display.
These devices are very annoying anyway, because you have to type in a lot of numbers for every money transfer, the characters are very small (on the laptop) and you have to carry the TAN Generator + the DKB debitcard all the time. Of course this is less secure.
I would change the bank immediately, but want to keep the Visa credit card. I have higher limits on it. That's the only reason. As soon as I found an alternative bank in Europe, I will leave the DKB for good.
It dont worked with Lineage 14.1 but with 15.1 unoffical build on Samsung S4 together with latest Magisk .Rom from here
https://www.cyanogenmods.org/forums/topic/lineageos-15-1-for-galaxy-s4-lte-android-8-1-oreo/
Works for me
Just tried again. It hasn't been working for me in the past. When downloading & opening the app, I had the same problems.
Then I simply followed the above advice: downloading the app again, didn't open it, hide with Magisk, reboot and opened the app - worked well and was able to register for tan2go.
I am using Lineage 16.0 and Magisk v18.0
DKB already updated their app - they patched it
kyodhin said:
Just tried again. It hasn't been working for me in the past. When downloading & opening the app, I had the same problems.
Then I simply followed the above advice: downloading the app again, didn't open it, hide with Magisk, reboot and opened the app - worked well and was able to register for tan2go.
I am using Lineage 16.0 and Magisk v18.0
Click to expand...
Click to collapse
The app version from September (version 2.3.0) does work, the newer app version from 4.4.19 (version 2.4.0) does not...
Tested working combination: Magisk 18.0, Magisk Manager 6.1, DKB version 2.3.0
Can confirm that, working with magisk and 2.3.0. Not working anymore with 2.4.0.
I have another Tan app from another bank and with the new version it also stops working. Seems that magisk is now quite to popular and they working on better detection. Magisk hide is useless on the recent version of these tan apps.
That really sucks. No way to get 2.4.0 working. Hoping for a magisk fix. Are the magisk developer informed that there are problems with magisk hide? I think others will have similar problems too.
I successfully got 2.4 working again, after it got updated and refused to start.
Following the steps from this post made it work again (German):
https://www.android-hilfe.de/forum/...trotz-magisk.901517-page-2.html#post-11532359
I installed Magisk 19.0 (beta) but contrary to the above mentioned post I left my Magisk modules installed as they were before the update.
Both the Magisk modules as well as TAN2Go 2.4 are now working again.
I had to authenticate the new TAN2Go installation by adding it as a "new device" using SMS verification.
I was not able to get it to run with the above mentioned instuctions.
Device: Nexus 6P (angler), ROM: LineageOS 15.1-20190419, Magisk modules: MagiskHide Props Config (required for ctsProfile test), Busybox for Android NDK (required for MagiskHide Props Config).
DKB Tan2Go crashes immediately when started.
Same for me. The above instruction doesn't work.
Downgrade to 2.3.0
I experienced the same problem. Had to do an important transfer yesterday. And of course Tan2Go-2.4.0 crashed. I'm using Magisk v18.1.
Today I did a downgrade via Aptoide to 2.3.0 and had to register the smartphone again via SMS. This worked without any problems.
To avoid the update problem and keep with 2.3.0:
Start Titanium Backup
Select the DKB Tan2Go App
Long click on the App.
Connect with Google Play Store (forced)
Long click the App again.
Disconnect from Google Play Store
Hope it helps. I don't think there's much to change in the DKB Api. I'll use 2.3.0 until they block it via the API.
If more people confirm the proposed solution with Magisk v19, I'll try it maybe.
I got it working with v2.4.0, but don't know which step was the solution. Switching to the "Canary" channel of Magisk or hiding the Magisk Manager in the settings. I think the last one was the solution.
Can you guys try and give feedback?
Don't forget to uninstall and install the app before testing again.
musv said:
If more people confirm the proposed solution with Magisk v19, I'll try it maybe.
Click to expand...
Click to collapse
I have the same issue. Hopefully it can be fixed via Magisk one day.
Worked with T2G 2.4, 19, 7.1.1
Walhalla said:
I got it working with v2.4.0, but don't know which step was the solution. Switching to the "Canary" channel of Magisk or hiding the Magisk Manager in the settings. I think the last one was the solution.
Can you guys try and give feedback?
Don't forget to uninstall and install the app before testing again.
Click to expand...
Click to collapse
Hi Walhalla,
Hi All
In Settings "General">"Hide" via other apk name it worked for me. V19.0, v7.1.1, Tan2Go 2.4
It looks like it should with Magisk, but I can't seem to get it to work. I have pay hidden, using magisk 17.1 and passing safety net. It sticks at card verification. It says "verifying with bank", then kicks me to the payment screen where it says "verification needed". Clicking on that gives me a momentary waiting circle, but nothing else happens. I've tried it with 2 different cards. US998, RR oreo 8.1.
nola mike said:
It looks like it should with Magisk, but I can't seem to get it to work. I have pay hidden, using magisk 17.1 and passing safety net. It sticks at card verification. It says "verifying with bank", then kicks me to the payment screen where it says "verification needed". Clicking on that gives me a momentary waiting circle, but nothing else happens. I've tried it with 2 different cards. US998, RR oreo 8.1.
Click to expand...
Click to collapse
That's not an issue with Pay. If Magisk was being blocked by root/unlocked bootloader, you would get a message when you first fire up Pay that your phone can't be verified so "Google Pay can't run on this device".
Have you contacted your bank to make sure they support it? If it's not being verified with your bank, sounds like you need to call them. For the last few years, my bank didn't. It wasn't until this past year that they actually allowed it.
I'm not sure what the issue was. It wasn't with the bank(s). I was having the same issue with all the cards I tried. Eventually did a wipe and it worked.
nola mike said:
I'm not sure what the issue was. It wasn't with the bank(s). I was having the same issue with all the cards I tried. Eventually did a wipe and it worked.
Click to expand...
Click to collapse
Well that's weird. Glad it's working though! :good:
After installing Google Pay, hide it using Magisk Hide, and Hide Magisk Manager in Magisk Settings. Then remove phone permission from Google Play Services and Play Store. Now you can register Pay on your rooted phone. After registration is complete, you should allow phone permission to Play Services and Play Store. This trick works always, I've tested with multiple custom roms with and without selinux enforcing.
If we want to reuse root features should we give phone permissions again ?
If we want to use Google pay again later should we re hide magisk and permissions ?
JackFrost said:
After installing Google Pay, hide it using Magisk Hide, and Hide Magisk Manager in Magisk Settings. Then remove phone permission from Google Play Services and Play Store. Now you can register Pay on your rooted phone. After registration is complete, you should allow phone permission to Play Services and Play Store. This trick works always, I've tested with multiple custom roms with and without selinux enforcing.
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
Sent from my Redmi 4 using Tapatalk
Yes and No
cneeli78 said:
If we want to reuse root features should we give phone permissions again ?
If we want to use Google pay again later should we re hide magisk and permissions ?
Sent from my Redmi 4 using Tapatalk
Click to expand...
Click to collapse
Phone permissions have nothing to do with root features, I didn't exactly understand what do you mean by reuse root features but I don't recall any root solution app or framework asking for Phone Permission. If you are asking about granting phone permission to Google Play Services after Google Pay registration, you should do it, it's not recommended to deny phone permission to Google Play Services. And once you hide Magisk you don't need to change it's state as Magisk will continue to work as expected whether it's hidden or not.
JackFrost said:
After installing Google Pay, hide it using Magisk Hide, and Hide Magisk Manager in Magisk Settings. Then remove phone permission from Google Play Services and Play Store. Now you can register Pay on your rooted phone. After registration is complete, you should allow phone permission to Play Services and Play Store. This trick works always, I've tested with multiple custom roms with and without selinux enforcing.
Click to expand...
Click to collapse
Yes it's working
JackFrost said:
After installing Google Pay, hide it using Magisk Hide, and Hide Magisk Manager in Magisk Settings. Then remove phone permission from Google Play Services and Play Store. Now you can register Pay on your rooted phone. After registration is complete, you should allow phone permission to Play Services and Play Store. This trick works always, I've tested with multiple custom roms with and without selinux enforcing.
Click to expand...
Click to collapse
thanks.its working
You are welcome
Arokia said:
Yes it's working
Click to expand...
Click to collapse
Karthik Arun said:
thanks.its working
Click to expand...
Click to collapse
There is a thanks button you can press if I could help you
JackFrost said:
There is a thanks button you can press if I could help you
Click to expand...
Click to collapse
Am I doing something wrong? I did everything but when I deny phone permissions I get a pop up saying its required to open google pay and cannot get passed that
raguilera510 said:
Am I doing something wrong? I did everything but when I deny phone permissions I get a pop up saying its required to open google pay and cannot get passed that
Click to expand...
Click to collapse
Did you by any chance remove phone permission from Google Pay app? You need to turn off telephone permission from Google Play Services and Google Play Store. Google Pay app needs phone permission to verify the phone number, don't turn off phone permission from Pay, do it for only play store and play services. Hope that helped.
Does not work
Once I renable telephone permission for Google Play Services, googlepay does not work anymore. Asks me to register and then I cannot register as I dont pass the security test. I am on lineage os 15.1
Non rooted lineageOS
I am a real newbie but i do use google pay a lot.
Will google pay just work on lineageOS that wasnt rooted or with magisk install, only with an unlocked bootloader. Or will i need extra work to do before i can use it?
kekekelasomot said:
I am a real newbie but i do use google pay a lot.
Will google pay just work on lineageOS that wasnt rooted or with magisk install, only with an unlocked bootloader. Or will i need extra work to do before i can use it?
Click to expand...
Click to collapse
Extra work? There's no extra work to install Magisk. It's part of the instructions when unlocking the bootloader and installing TWRP. Magisk Hide (part of Magisk Manager) lets Google Pay work.
When you unlock the bootloader and install TWRP (which you need to install ROMs), the next steps in the process include flashing three files IN TWRP: the no root checker, the no encryption and Magisk. I'm not clear why you would just stop short of finishing the process.
Unless you use Magisk Hide, simply unlocking the bootloader will cause Google Pay to then fail -- even without installing TWRP or a ROM.
Unlocked bootloader by itself -- without Magisk Hide (a part of Magisk) -- will cause Safety Net to fail. Google Pay will not work.
Why do you want Lineage OS without root? That's like owning a car with internal combustion engine, but refusing to put in gasoline. (or refusing to charge a Tesla.) You can do it, but to me it doesn't make sense.
You might as well stay on stock unrooted firmware.
I have stock rooted firmware. I'm not using any custom ROMs -- but at least I have root and my Magisk mods.
ChazzMatt said:
Extra work? There's no extra work to install Magisk. It's part of the instructions when unlocking the bootloader and installing TWRP. Magisk Hide (part of Magisk Manager) lets Google Pay work.
When you unlock the bootloader and install TWRP (which you need to install ROMs), the next steps in the process include flashing three files IN TWRP: the no root checker, the no encryption and Magisk. I'm not clear why you would just stop short of finishing the process.
Unless you use Magisk Hide, simply unlocking the bootloader will cause Google Pay to then fail -- even without installing TWRP or a ROM.
Unlocked bootloader by itself -- without Magisk Hide (a part of Magisk) -- will cause Safety Net to fail. Google Pay will not work.
Why do you want Lineage OS without root? That's like owning a car with internal combustion engine, but refusing to put in gasoline. (or refusing to charge a Tesla.) You can do it, but to me it doesn't make sense.
You might as well stay on stock unrooted firmware.
I have stock rooted firmware. I'm not using any custom ROMs -- but at least I have root and my Magisk mods.
Click to expand...
Click to collapse
Thank you. Just flash magisk and hide google pay using it. From what i under stand is i have root access+ unlocked bootloader+ google pay functionalities. And the reason not to root is just because i want the feel of stock android+some nice modification
Recently had this problem with G Pay also. Found where some just deleted 'cache' and 'data' from Google Play and Play Services. That worked for me too. Of course hide Magisk etc first.
AsItLies said:
Recently had this problem with G Pay also. Found where some just deleted 'cache' and 'data' from Google Play and Play Services. That worked for me too. Of course hide Magisk etc first.
Click to expand...
Click to collapse
Thank you. That's all I had to do to get it working for me.
Hi, I'm not able to get Google Pay working on my rooted V30. I unlocked bootloader and flashed TWRP, no checker, no encryption, using chazzdave's WTF tutorial. Now have Havoc installed. I have hidden root from play, play services, and pay. I've hidden magisk by scrambling APK. I've cleared cache and data of play, play services, and pay. I've revoked telephone permission for play services and play store, although I had to re-enable play services telephone permission during card setup because pay wouldn't go any further. But nothing. Just error message that root is enabled and cannot proceed.
One of my banking apps which didn't work on root is working after hiding from magisk, but no Google pay. Has something updated and a loophole been closed?
Thanks
Forsh said:
Hi, I'm not able to get Google Pay working on my rooted V30. I unlocked bootloader and flashed TWRP, no checker, no encryption, using chazzdave's WTF tutorial. Now have Havoc installed. I have hidden root from play, play services, and pay. I've hidden magisk by scrambling APK. I've cleared cache and data of play, play services, and pay. I've revoked telephone permission for play services and play store, although I had to re-enable play services telephone permission during card setup because pay wouldn't go any further. But nothing. Just error message that root is enabled and cannot proceed.
One of my banking apps which didn't work on root is working after hiding from magisk, but no Google pay. Has something updated and a loophole been closed?
Thanks
Click to expand...
Click to collapse
Use Magisk v19. I believe it's a beta at the moment
hi need help on dbs banking app detecting root starting from December 2021, i am unable to hide root from dbs digibank app tried magisk hide, xprivacylua. But gpay is working fine . Device htc u11 rooted with magisk 24.1
One more thing if I unroot my device dbs bank app works fine but gpay detecting unlocked bootloader and stopped working
Solved - zygisk and shamiko do the thing
raokashan said:
hi need help on dbs banking app detecting root starting from December 2021, i am unable to hide root from dbs digibank app tried magisk hide, xprivacylua. But gpay is working fine . Device htc u11 rooted with magisk 24.1
One more thing if I unroot my device dbs bank app works fine but gpay detecting unlocked bootloader and stopped working
Click to expand...
Click to collapse
Just try using Magisk brother or you can also try with Magisk 23.0, and just hide the app fully.. and also just change the name of Magisk app.
Already did that no use
raokashan said:
Already did that no use
Click to expand...
Click to collapse
Bypass DBS banking App
Resently BDS banking app(India) is updated.is there any modules to make that work...:rolleyes:
forum.xda-developers.com
Check this out
Tried every version of magisk from 20 to 24.1 no luck, someone got working for this help me
After June update Kotak Bank app also stopped working. It is detecting root even after Universal Safetynet Fix + Shamiko.
abhinavkumar842 said:
After June update Kotak Bank app also stopped working. It is detecting root even after Universal Safetynet Fix + Shamiko.
Click to expand...
Click to collapse
Yeah, cant say what they did within app or server side detecting root, but safety net is passed
raokashan said:
Yeah, cant say what they did within app or server side detecting root, but safety net is passed
Click to expand...
Click to collapse
They did something within the app, nothing server side to detect root. I am able to use older version of Kotak app and disabled auto update.
Can you share apk
raokashan said:
Can you share apk
Click to expand...
Click to collapse
Extracted using another app from older device, most likely it wont work but you can try after renaming it ofcourse. If it doesnt work you can always use net-banking instead of mobile-banking using phone browser, it is also quite secured with OTP codes & password.
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Tech = Spy-Biz said:
Extracted using another app from older device, most likely it wont work but you can try after renaming it ofcourse. If it doesnt work you can always use net-banking instead of mobile-banking.
Click to expand...
Click to collapse
Not working
raokashan said:
Not working
Click to expand...
Click to collapse
now check and see,
In my old phone J2 2018 A7 using Magisk 23 version 5.3.3 is working but under magisk hide the service [ (isolated) BlaBlaBla ] does not show as [ (isolated) Detect Root BlaBlaBla ] so when I install the same version 5.3.3 on A11 it shows [ (isolated) Detect Root BlaBlaBla ] under magisk hide. What that could mean is KB 5.3.3 version bank app is OPTIMIZING itself depending on android version installed in the device.
Version 534 working fine on my device after updating to 536 started detecting root, and i don't have a backup too, if anyone have 534 version share it
L
raokashan said:
Version 534 working fine on my device after updating to 536 started detecting root, and i don't have a backup too, if anyone have 534 version share it
Click to expand...
Click to collapse
Look by apkmirror
@Tech = Spy-Biz kbank-811 v537 got working with usnf modded version
raokashan said:
@Tech = Spy-Biz kbank-811 v537 got working with usnf modded version
Click to expand...
Click to collapse
Yup v537 working.
( FYI, I used Android 11 GSI + USNF MOD Version + Signature Spoofing Enabled + microG Gapps Module with microG-GooglePlayStore frozen + 6 Services from v537 disabled + I installed v537 from aurora ) So thats either a miracle or the KB app Dev had mercy on KB clients
ICICI iMobile from Aurora is working too .
RBL Mobank detects Developer Mode ON & also detects Aurora download & installed using package installer, so wont work unless google Account present which means have to keep that peeemp-azz playstore app inside the phone with a peemped-azz gmail account on the phone, I find all this unnecessary on part of the bank bcoz i know one of the older versions of KB App was working with Superuser permission from Magisk app .
If a bank app asks for SU permissions to work then thats a tradeoff the bank customers wouldnt really mind much bcoz there are plenty other possibly shady apps like SeFix App (malware flagged by Malwarebytes) using root privileges as well (I uninstalled it ofcourse).
I just wish the bank acts more maturedly with its customers coz its relation with its customers is a financial one not to spy on its customers which thankfully its not doing uptill now. By the word "Maturedly" I meant the banks should allow their customers to use rooted devices and should rather focus on other means to find out if security breach is happening real-time or offline remotely from a cloned SIM Card etc. For example -The banks can have some kind of software to check with their customers Mobile Carrier if there are multiple SIM cards registered under the same phone number, that would be better than to cause incovenience to its customers by not allowing them to use their bank app on rooted devices. It doesnt make any business sense unless google is paying/forcing the banks to make their customers use google accounts and Gapps. Thats really sick man! They can just create 2-step Verification or maybe 3 or 4 step verification for their banking apps instead of forcing clients to use google. Absolutely sold-out garbage peemping going on between the banks and google admob. I'm sick to the point of vomit looking at how LOW google is ready to stoop just to secure mainly one presumably sweet corner of the world and to make ships full of spy-money! What a PEEEEMP!
Will it work if you download an un-rooted version of VM's like VMOS, Virtual Android, etc.?
A13 stock. Magisk 25203. PS Remote Play app 5.5, and hidden in the Magisk deny list, like other apps.
Other typical root detecting apps foiled, but not this one. Hiding the Magisk manager itself didn't help.
Suggestions?
Assuming you're on the stock ROM, else you might need to use MagiskHide Props Config. Try turning on Zygisk and adding Displax's version of USNF and Shamiko (note: Shamiko is a closed-source root hider, so your call if you trust it). Keep in mind that if you use Shamiko, then the "enforce deny list" switch needs to be off. Shamiko reads from the list and handles it instead (so you do still need to have Google Play Services and PS Remote Play in the deny list). So far I haven't had anything detect root with this setup as long as it's in my deny list, though I don't have a PlayStation so I can't test it with this specifically.
I am on A13 stock. I'll look into this. FWIW, one doesn't need a PlayStation to see the app PS Remote App fail the root check, which is upon opening it, resulting in error 88001003
PS Remote Play - Apps on Google Play
Access your PS5 or PS4 wherever you go.
play.google.com
Interesting, it's happening the moment you open the app? I don't have a Playstation account, but I can open the app and get in far enough to see the account login screen with no error. That's on my system with the above utilities installed as well as Magisk and LSposed, running the Android 13 QPR1 beta. If you set all that up and it's still happening, try clearing the PS Remote Play app's data, too.
Jaitsu said:
Interesting, it's happening the moment you open the app?
Click to expand...
Click to collapse
Yes. It may be using some data from the general PS App to auto-login, but it appears as instantaneous error to me, even after full storage/cache wipe and force close.
I just updated USNF, and installed the MOD version on top of that as you suggested, still no go. Disney+, Nintendo, other apps that check still work. Play Store certified, pass YASNAC.
Haven't tried the Shamiko thing yet
Are you hiding the Magisk app itself?
I'm using Canary manager, btw
deusfaux said:
Yes. It may be using some data from the general PS App to auto-login, but it appears as instantaneous error to me, even after full storage/cache wipe and force close.
I just updated USNF, and installed the MOD version on top of that as you suggested, still no go. Disney+, Nintendo, other apps that check still work. Play Store certified, pass YASNAC.
Haven't tried the Shamiko thing yet
Are you hiding the Magisk app itself?
I'm using Canary manager, btw
Click to expand...
Click to collapse
I am hiding the Magisk app itself, with the default "Settings" name. Normal release (25.2/25200) of Magisk. Do you have any other root-related apps the PS Remote Play app might be looking for? (Though I myself have Fox's Magisk Module Manager, LP, the TWRP app, and Franco Kernel Manager installed on my phone and they don't seem to be setting it off.)
I'd suggest turning off USB debugging. I had similar issue with some of my banking and other apps and tried every possible solution but didn't work. Finally I read somewhere to turn off USB debugging and Eureka!!
I've narrowed it to something the recent app version 5.5 is doing
Versions 5.0 and earlier have no problems loading.
My USB debugging is/was off.
It must be looking at / for some other app I have installed, which is really annoying to troubleshoot
Hello,
As you said, I downgraded the app to the version 5.0 ans now I can login
But I can't associate the playstation
It ask me to upgrade to the last version and if i refuse, the association failes.
Do you have the same problem ?
Thx
twingo_man said:
Hello,
As you said, I downgraded the app to the version 5.0 ans now I can login
But I can't associate the playstation
It ask me to upgrade to the last version and if i refuse, the association failes.
Do you have the same problem ?
Thx
Click to expand...
Click to collapse
Ver 5.01 asked me if I wanted to update but i could choose 'later' and successfully connect to my PS5
i choose later but I can't connect to my ps5
i will try to put it on wifi...
twingo_man said:
i choose later but I can't connect to my ps5
i will try to put it on wifi...
Click to expand...
Click to collapse
We should also try to determine what exactly latest version is detecting and preventing app from working
I have a rooted Samsung SG10Exynos/OS9 that bypasses SafetyNet with the help of Magisk 26.0 & safetynet-fix-v2.4.0-MOD_1.2 (meets BASIC INTERGITY) that I have been using the Starling Bank app 2.92.1.79025 without an issue. I stupidly upgraded to the latest version and got the attached screenshot saying that I had 14 days to restore the device to factory settings (I was still able to use the app after pressing ok). I even more stupidly thought that I could revert back to the previous version that I was using, using Titanium Backup which failed (the app would just flash continuous on launch) and then Swift backup (where it would just repeatedly crash even even before being launched requiring a force stop)
If I wipe data/uninstall/restart phone and install fresh from google play, I now get the attached screenshot saying again to restore to factory, but the button says close app. So being a digital bank, I'm now locked out of my account.
I've tried to install previous versions from APKMirror mirror after wiping data/uninstall/restarting phone, and then just restoring my data with my Titanium/Swift backups but still no joy.
Does anyone know how to downgrade/install not the latest version of Starling Bank, which doesn't have the increased STRONG INTERGITY check?
nukescript said:
I have a rooted Samsung SG10Exynos/OS9 that bypasses SafetyNet with the help of Magisk 26.0 & safetynet-fix-v2.4.0-MOD_1.2 (meets BASIC INTERGITY) that I have been using the Starling Bank app 2.92.1.79025 without an issue. I stupidly upgraded to the latest version and got the attached screenshot saying that I had 14 days to restore the device to factory settings (I was still able to use the app after pressing ok). I even more stupidly thought that I could revert back to the previous version that I was using, using Titanium Backup which failed (the app would just flash continuous on launch) and then Swift backup (where it would just repeatedly crash even even before being launched requiring a force stop)
If I wipe data/uninstall/restart phone and install fresh from google play, I now get the attached screenshot saying again to restore to factory, but the button says close app. So being a digital bank, I'm now locked out of my account.
I've tried to install previous versions from APKMirror mirror after wiping data/uninstall/restarting phone, and then just restoring my data with my Titanium/Swift backups but still no joy.
Does anyone know how to downgrade/install not the latest version of Starling Bank, which doesn't have the increased STRONG INTERGITY check?
Click to expand...
Click to collapse
It will force you to use the latest app.
Block firebaseremoteconfig.googleapis.com
theoneofgod said:
It will force you to use the latest app.
Block firebaseremoteconfig.googleapis.com
Click to expand...
Click to collapse
Also having the same issue. Is this something I should be blocking in Zygiskhide? I can't see it there. Googling the above isn't helping me.
Undeadwolfy said:
Also having the same issue. Is this something I should be blocking in Zygiskhide? I can't see it there. Googling the above isn't helping me.
Click to expand...
Click to collapse
You could try Magisk Delta as it now acts as whitelist so you add only what you want with root. This won't bypass Starling security though. You need to also block address above.
Undeadwolfy said:
Also having the same issue. Is this something I should be blocking in Zygiskhide? I can't see it there. Googling the above isn't helping me.
Click to expand...
Click to collapse
Blocking this address (firebaseremoteconfig.googleapis.com) through AdAway has fixed it for me! That is along with all the things that were needed to run it previously.
theoneofgod said:
You could try Magisk Delta as it now acts as whitelist so you add only what you want with root. This won't bypass Starling security though. You need to also block address above.
Click to expand...
Click to collapse
I think the part where I'm stuck is, what would you suggest to block that address? I can't do that in HMA or in Denylist because it doesn't exist.
I've tried blocking in AdAway and manually adding and still getting Starling recognising root.
I've blocked anything Google Play Services, Play Protect, Wallet too. Starling is my main bank. Has only been an issue in the last couple weeks.
A13 P6 Pro running the April security update 13 (TQ2A.230405.003.E1), Magisk 26101, USNF 2.4.0 Mod 1.2, passing Safetynet Basic+ CTS.
Will look at Magisk Delta next.
marian42 said:
Blocking this address (firebaseremoteconfig.googleapis.com) through AdAway has fixed it for me! That is along with all the things that were needed to run it previously.
Click to expand...
Click to collapse
This isn't working for me :/. Can you share what other modules you're running/how you've set up Magisk?
I followed the directions in this video.
I didn't do the final step where he renames the Magisk app, seems that it isn't necesary.
The YASNAC app shows that the device passes "Basic integrity" and "CTS profile match".
Also remember that blocking firebaseremoteconfig.googleapis.com might break other apps that use this domain (I've found one so far).
Undeadwolfy said:
I think the part where I'm stuck is, what would you suggest to block that address? I can't do that in HMA or in Denylist because it doesn't exist.
I've tried blocking in AdAway and manually adding and still getting Starling recognising root.
I've blocked anything Google Play Services, Play Protect, Wallet too. Starling is my main bank. Has only been an issue in the last couple weeks.
A13 P6 Pro running the April security update 13 (TQ2A.230405.003.E1), Magisk 26101, USNF 2.4.0 Mod 1.2, passing Safetynet Basic+ CTS.
Will look at Magisk Delta next.
Click to expand...
Click to collapse
It's a recent update that broke it.
Try Magisk 26.1, enable Zygisk and enforce deny list. Add systemless hosts. Add only Starling to the deny list.
Install safetynet fix 2.4.0 mod 1.2 by displax.
Add the domain I posted to adaway blocklist. Make sure its enabled and in root mode.
theoneofgod said:
It's a recent update that broke it.
Try Magisk 26.1, enable Zygisk and enforce deny list. Add systemless hosts. Add only Starling to the deny list.
Install safetynet fix 2.4.0 mod 1.2 by displax.
Add the domain I posted to adaway blocklist. Make sure its enabled and in root mode.
Click to expand...
Click to collapse
That's exactly how I have it running now. No change.
Undeadwolfy said:
That's exactly how I have it running now. No change.
Click to expand...
Click to collapse
It's the domain that did it for me. Working fine as of now.
theoneofgod said:
It's the domain that did it for me. Working fine as of now.
Click to expand...
Click to collapse
Thanks for updating. I have both of these in my AdAway too
Code:
firebaseinstallations.googleapis.com
firebaseremoteconfig.googleapis.com
Nothing doing
Undeadwolfy said:
Thanks for updating. I have both of these in my AdAway too
Code:
firebaseinstallations.googleapis.com
firebaseremoteconfig.googleapis.com
Nothing doing
Click to expand...
Click to collapse
Clean install for Starling? I'm trying to think if I did something else.
Oh. Have you "hidden" Magisk?
Just to weigh in here, I can confirm blocking:
firebaseremoteconfig.googleapis.com
Does indeed allow the Starling app to work. Yes blocking Firebase is going to stop some applications working, but you could always pause AdAway until you are done using the problematic app then resume AdAway when you want to use Starling.
Many thanks @theoneofgod
Not working
Reverting the Starling app back to version 2.95.1.79953 fixes things - just don't forget to re-add it to the Deny List.
I'll probably stay on this version until a new fix is found for the current version 2.96.0.80202.
darsh said:
Reverting the Starling app back to version 2.95.1.79953 fixes things - just don't forget to re-add it to the Deny List.
I'll probably stay on this version until a new fix is found for the current version 2.96.0.80202.
Click to expand...
Click to collapse
Wild, even this didn't work for me. No idea why I'm having issues.
Hi All
Quick update - Can confirm that rolling back to 2.95.1.79953 does fix things for now
This is using adaway to block the Firebase URLs in a custom host file and using enforce denylist. It doesnt work beyond that for now.
I swapped over to Magisk Alpha for now but i dont know what Starling are doing in the background to see that you have root at this point. Its very annoying
- Edit 2
They seem to be detecting the Enforce Denylist in Magisk (In any form)
Disabling it on version 2.95.1 shows the app can see root. Enabling it allows the app to proceed as if you are not rooted.
Give KernelSU a try if you can. No modules or any workarounds required.
theoneofgod said:
Give KernelSU a try if you can. No modules or any workarounds required.
Click to expand...
Click to collapse
Isnt that the same as the setting in magisk that hides root from everything not on the su list. Which also doesnt work.