Hello everyone,
I was looking for a solution of my problem, i have found similar topic > https://forum.xda-developers.com/t/android-transfer-doesnt-connect.4569285/ , but it won't help me.
So few days ago i bought used phone - redmi note 9 pro. Previous user restarted device to factory settings. I wanted to transfer files from my PC to phone, but i can't do it. When I connect my phone and my PC,phone start charging but it didn't show me options. There should be options like file trasfer or charging etc. But i don't get any popup.
I have tryed:
1. Connect phone and PC by two diffrents USB cable, and two PC. One with WIN 7, second WIN 11 - not working
2. Turn on developer mode, and turn on debugging USB. Set configuration USB as sending files - still not working
3. Restarted phone, PC - still not working.
I don't know what i should do right now. Any ideas ? Please.
Thanks
Related
Hi, first post here.. so Hi
I have an issue with my S3, i can't get my pc to detect it in download mode at all, no reaction from windows.. if didnt plug it in to the pc at all, it worked once, and it took me reinstalling drivers for hours to get it working, this is when i first rooted the phone using the cf-root method..
When i wanted to install a custom rom a few months ago i discovered it went back to not getting detected and has stayed that way
it's as if i've not connected it to the pc at all, i'm using a rear usb port, with the original cable, below is a short list of what i've tried
Tried 3 different cables
Used a brand new install of windows 7 with SP1
tried various Samsung ADB Drivers
Tried every single USB port, front and back on my pc
Used as many different USB Debugging options as possible
I noticed that when i turn on USB debugging after enabling developer mode, nothing changes on the pc, if i remember rightly my S2 made windows install the adb driver when i turned USB debugging on..
Any help is appreciated with this, never had any of this happen with my S2 lol :/ i've been messing around on and off the last few months with it, thankfully there's Mobile Odin and also Nandroid backups for me to fall back on
Pulling the battery with the cable plugged in while my S3 was in download mode is what fixed this for me...
With the usb cable plugged into the PC but NOT the phone, go into download mode.
Connect cable to the phone, then pull the battery out.
Once windows detects the phone and installs drivers it's safe to put the battery back in.
Phone will be detected by Odin/ CyanogenMod installer and so on.
Why in hell having the battery in stops windows detecting the phone in download mode is beyond me.. unless samsung did it on purpose? lol..
Installed CM 11 using the above method and it went perfectly, but i do have to use the above method whenever i want to flash something using my pc, so it's more of a work around than a fix..
Fix was found on YouTube of all places! hope this helps anyone else
Hi guys. i really need for your help. I just bought Honor 5x today. After i reached home i tried to connect the device with PC. At the beginning i transferred files that I downloaded from phone to PC and its going fine. Later, i once again want to transfer few songs to the device. When it connected i accidentally choose charge only and after that whenever i connected the device to the PC it just charging without any prompt to choose MTP or USB even after I reboot PC and device. FYI my device os running on 5.0.1 lollipop and my PC is running on win 7. Thank you in advance guys
Arobase40 said:
Changing options is in the notification bar once your phone is connected to your PC.
Click to expand...
Click to collapse
Yes but after i accidentally chose charging only, there is no notification anymore after i plugged it in usb port. It only charging the device without any option to choose
Hello,
recently my bluboo xtouch (android 5.0.1) got its display broken and so i cna't see anything on screen, so to get access again to it i wanted to use [email protected] but my device isn't recognized by adb.
the touch on the phone still works but i don't know how well, the phone is still working as it is receiving messages and phone call, i managed to get the phone connected to the same network of my pc.
Now, usb debugging should be on as i never turned it off (is there a way of testing if it is enabled?), the phone is set to PTP as windows recognize it as a camera and i can access the phone but only the folders called
DCIM and Pictures. Under device manager it shows up as a portable device. The problem is that it won't show up in adb, i tried a lot of solution but nothing worked (the adb_usb.ini is set to the right VID, i got the drivers for my phone installed, i got 2 version of adb (one sohuld be 32 another 36) one from a freshly new install of android studio and another that i think is the universal one).
IT DOES SHOW UP IF I PUT IT IN (VOL+)+(POWER) MODE
Now i have no clues of to get it working i thought that, if the problem is the PTP mode i would need screenshots of the ui so i can change the mode without seeing the real screen, but the rom that is used by my device
is not that popular.
Anyone has any idea on how to show it under adb devices?
Thanks in advance
NEWS
i managed to reach the "select type of connection" and i've tried charge mode (doesn't work), old for xp (it shows up as a cd rom), and now i'm trying with MTP but i got problem with drivers
NEWS II
i managed to connect the phone in mtp and to copy all the files i needed to the pc, but still i'd like to get [email protected] working, i can swap between connection mode (mtp, ptp, charge) and i can unlock the phone (cause it's fingerprint locked). My new problem is: how do i backup all of my contacts?
Hi!
I have searched XDA forum and other forum concerning LineageOS. But I have not found a solution.
My latest experiments were with installation of the adb interface on windows. At first, this worked well and I got full massstorage access. The Galaxy and its both memories did show up in Windows Explorer (like in old ages).
At the next restart of Windows (Win 7 64-bit Pro) when I connected my phone, Windows immediately did install the samsung drivers again. And since that things got even worse: No even the MTP and PTP Mode did not work, so that the Smartphone does not show up at all in the Windows Explorer!
At F-Droid, I have found an app, called USB Mountr. I tried this, but without any effort.
In the device manager of Windows I can see an „Android Composite ADB Interface”. It tells, that the device would work OK.
Now I am stuck with this and I hope, someone will help me, to activate usb massstorage access.
BTW: I have flashed my Galaxy S2 with Heimdall, running on Ubuntu. Heimdall on Windows 7 did not work, because of libusb error -12.
Latest status:
I have uninstalled the app USB mountr and did reboot the phone. Now the USBconnector is only active for charging the battery. I even get no connection in PTP or MTP mode.
Then I have deactivated USB debug mode and ADB. did a reboot, reactivated ADB and USB debug etc. and did further reboot the phone but with no success.
USB connection is nearly dead and cannot have connect with LUBUNTU Laptop. On Win 7, I get the signal tone, which is typical for connecting an USB device. The GT.i9100 shows up in Explorer but cannot be connected. Device manager tells me, that it is an Android device and all would be OK.
As a work around I am using MyPhoneExplorer on Win-7 and KDEconnect for Ubuntu.
Please can anybody tell me, what I should do, to get back at least USB connection in MTP or PTP mode???
I have the exact same problem.
I did notice, that after first boot, there was a message (several times) the MTP daemon/service stopped working (Crashed ?)
Does anyone else encounter this ?
Did anyone else resolve this ?
(Currently I was only able to get/send files to the device via BT, which is slow, annoying,
and a lot of work moving files to their required places after transmitting over BT)
Quick Fix for stuck on boot
This probably isn't the right place but you said there weren't many solutions. If your phone randomly gets stuck on boot you need to Delete Everything including system, factory data reset, flash ROM again with ADB, go through setup. The reason it probably hanged is because you installed an old version of SuperSU Binary or because you flash OpenGapps before setting up phone.
Hope this works
P.S Sorry for the late reply
Hi,
I have a Redmi note 5, just 5 months old. Recently it fell down and the screen is completely broken. Unable to see the screen and touch is not working. I want to recover data from the phone. I was trying without any luck for past couple of days. Tried following things and none helped.
1. Connected phone to PC via USB cable, but since by default MTP is not enabled internal storage is not displayed.
2. Tried to use MI PC suit but seems like it's not supporting the Android version or MiUi version. I have Android N and MiUi 10. Tried with multiple versions of PC suit and no luck.
3. Reboot to fastboot mode : I don't have debugger option enabled, so only fastboot commands work, adb commands not working. Tried to unlock OEM, flash custom recovery etc: and nothing works! (Next time first thing I'll do with a new phone is enabling debug mode!!)
4. Tried to use Mi account to unlock bootloader but since device is not added into my acount, that also not possible.
5. Tried a bunch of softwares to cast screen to pc or control from pc , but nothing works as debugging not enabled.
I need help if anyone having any other ideas.
One way in my mind is to enable usb debugging just by using an otg keyboard. But this requires help from some one really kind.; to upload a video showing how to open settings and enable debugging only using a keyboard connected via OTG cable ( My phone is running on MiUi 10). I know it's too much to ask..but.. still..
Thank You