My P20 lite is stuck on boot, i can enter in fastboot mode and obtain the following:
(bootloader) :ANE-LX1 9.1.0.132(C432E5R1P7)
OKAY [ 0.005s]
Finished. Total time: 0.005s
(bootloader) ANE-LX1
OKAY [ 0.002s]
Finished. Total time: 0.002s
vendorcountry: hw/eu
Finished. Total time: 0.002s
(bootloader) :ANE-LX1-CUST 9.1.0.13(C55)
OKAY [ 0.003s]
Finished. Total time: 0.003s
(bootloader) :ANE-LX1 9.1.0.132(C432E5R1P7)
OKAY [ 0.003s]
Finished. Total time: 0.003s
BUT:
fastboot oem get-psid
FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
I have tried trough dload method several times but i obtained error everytimes.
I can put the phone in recovery mode.
Someone can help me?
Enter eRecovery mode and tap "Download latest version etc."
tury1979 said:
I can put the phone in recovery mode.
Click to expand...
Click to collapse
Wipe cache or Factory reset ?
-Alf- said:
Enter eRecovery mode and tap "Download latest version etc."
Click to expand...
Click to collapse
"Getting package info failed!"
-Alf- said:
Wipe cache or Factory reset ?
Click to expand...
Click to collapse
it is not available, it is grayed
You can try to disconnect the battery for a few minutes (or let the battery discharge completely), but
tury1979 said:
it is not available, it is grayed
Click to expand...
Click to collapse
probably your memory is dead.
Ok trought hardware test point i solved.
I'm now with pixel experience A11. Do you know how to fix NFC?
tury1979 said:
how to fix NFC?
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/...plus-a11-gsi-unofficial.4298551/post-85255135
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84394147
-Alf- said:
https://forum.xda-developers.com/t/...plus-a11-gsi-unofficial.4298551/post-85255135
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84394147
Click to expand...
Click to collapse
I understand that i have to go back to stock 9.1
I'm right?
tury1979 said:
I'm right?
Click to expand...
Click to collapse
Read carefully :
-Alf- said:
Note: you can use this procedure additionally, with LOSQ on board:
- In TWRP unmount all except SD Card , Vendor and System (unmount and mount again if needed)
- Flash nfc_universal_patch
- From TWRP menu reboot into stock recovery and perform factory reset .
Click to expand...
Click to collapse
-Alf- said:
Read carefully :
Click to expand...
Click to collapse
I've tried but now i have only a toggle for NFC.
tury1979 said:
I've tried but now i have only a toggle for NFC.
Click to expand...
Click to collapse
Which P.E. did you install?
-Alf- said:
Which P.E. did you install?
Click to expand...
Click to collapse
PixelExperience_arm64-ab-11.0-20211009-UNOFFICIAL
tury1979 said:
PixelExperience_arm64-ab-11.0-20211009-UNOFFICIAL
Click to expand...
Click to collapse
If you followed the instructions to the letter, NFC should work with this ROM. During installation, there are two important moments - 1. unmount everything in twrp except system and vendor (and of course SD card) 2. factory reset. But we talked about that before...
-Alf- said:
If you followed the instructions to the letter, NFC should work with this ROM. During installation, there are two important moments - 1. unmount everything in twrp except system and vendor (and of course SD card) 2. factory reset. But we talked about that before...
Click to expand...
Click to collapse
I didn't make factory reset. I will try. And Magisk? I installed Magisk manager but i don't understand how to root my p20 lite.
NFC seems fixed but now play store says that i don't have enough space.
tury1979 said:
NFC seems fixed but now play store says that i don't have enough space.
Click to expand...
Click to collapse
I would suggest the following:
- go back to stock EMUI 9.1 via dload method and try to install [11] P.E. Plus,
https://forum.xda-developers.com/t/my-experience-pixel-experience-plus-a11-gsi-unofficial.4298551/
Download link
Here
Which rom 9.1?
tury1979 said:
Which rom 9.1?
Click to expand...
Click to collapse
Are you kidding me?
Or are you really .....?
https://forum.xda-developers.com/t/...ocked-stuck-in-bootloop.4572423/post-88375139
Sorry, but these dialogues are just a waste of time...
-Alf- said:
Are you kidding me?
Or are you really .....?
https://forum.xda-developers.com/t/...ocked-stuck-in-bootloop.4572423/post-88375139
Sorry, but these dialogues are just a waste of time...
Click to expand...
Click to collapse
I do not want to kid you buy i have tried with this rom in dload but i get failed error
tury1979 said:
I do not want to kid you buy i have tried with this rom in dload but i get failed error
Click to expand...
Click to collapse
on EMUI 9, you need to have stock recovery installed to be able to flash dload.
Related
I have found threads where this was asked too but it didn't get solved or it did but for a specific device.
I have a OPX with OOS 3.1.4
In command prompt typed "fastboot oem device-info" it gives me this info "device unlocked true" typed "fastboot flash recovery recovery.img" i named my recovery file "recovery" obviously. i get info
target reported max download size of 536870912 bytes
sending 'recovery' (14758 KB)...
OKAY [ 0.531s]
writing 'recovery'...
OKAY [ 0.313s]
finished. total time: 0.844s
but when i reboot to my recovery it is still the stock OP recovery.
medick_ said:
I have found threads where this was asked too but it didn't get solved or it did but for a specific device.
I have a OPX with OOS 3.1.4
In command prompt typed "fastboot oem device-info" it gives me this info "device unlocked true" typed "fastboot flash recovery recovery.img" i named my recovery file "recovery" obviously. i get info
target reported max download size of 536870912 bytes
sending 'recovery' (14758 KB)...
OKAY [ 0.531s]
writing 'recovery'...
OKAY [ 0.313s]
finished. total time: 0.844s
but when i reboot to my recovery it is still the stock OP recovery.
Click to expand...
Click to collapse
after flashing by "fastboot flash recovery recovery.img", boot into recovery directly by giving this cmd "fastboot boot recovery.img" this time it should overwrite your stock op recovery. try this and report back.
I'm assuming your trying to immediately boot into recovery after flashing because it will overwrite it. You can try the command "fastboot erase recovery" before flashing twrp. After flashing recovery completely turn off the phone. Then hold down volume down and proceed powering on into recovery. Sorry for the step by step if your not a noob just have to make sure we cover step by step. The above post is the proper way to boot after flashing try it first.
cva_kabil said:
after flashing by "fastboot flash recovery recovery.img", boot into recovery directly by giving this cmd "fastboot boot recovery.img" this time it should overwrite your stock op recovery. try this and report back.
Click to expand...
Click to collapse
Thanks for the reply
This is the the info i get:
downloading 'boot.img'...
OKAY [ 0.531s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.578s
And it stays in fastboot mode (guessing cause the dtb wasn't found)
medick_ said:
Thanks for the reply
This is the the info i get:
downloading 'boot.img'...
OKAY [ 0.531s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.578s
And it stays in fastboot mode (guessing cause the dtb wasn't found)
Click to expand...
Click to collapse
Which recovery u tried?
Exodusche said:
I'm assuming your trying to immediately boot into recovery after flashing because it will overwrite it. You can try the command "fastboot erase recovery" before flashing twrp. After flashing recovery completely turn off the phone. Then hold down volume down and proceed powering on into recovery. Sorry for the step by step if your not a noob just have to make sure we cover step by step. The above post is the proper way to boot after flashing try it first.
Click to expand...
Click to collapse
When i boot it stays stuck on the OP logo so I want to try other methods before ereasing my recovery. Cause I think this will give me another problem. Of course if you have more knowledge about this problem and say that it works then i will try it
cva_kabil said:
Which recovery u tried?
Click to expand...
Click to collapse
this one https://dl.twrp.me/onyx/twrp-3.0.2-0-onyx.img.html
medick_ said:
this one https://dl.twrp.me/onyx/twrp-3.0.2-0-onyx.img.html
Click to expand...
Click to collapse
The one u flashed ll not work in oos 3.x.x as u r in new bootloader,
Try flashing this one.. this ll work https://www.androidfilehost.com/?fid=457095661767115910
cva_kabil said:
The one u flashed ll not work in oos 3.x.x as u r in new bootloader,
Try flashing this one.. this ll work https://www.androidfilehost.com/?fid=457095661767115910
Click to expand...
Click to collapse
thanks mate this twrp worked. Is there a way to see if the recovery version is compatible or not? Just for should i get another phone or when i update too nougat
medick_ said:
thanks mate this twrp worked. Is there a way to see if the recovery version is compatible or not?
Click to expand...
Click to collapse
Not exactly,but as of now there is no official twrp for onyx new bootloader.. Luckily we hv smart dev like @Nachiket.Namjoshi Thank for dem.. And not sure about other devices,but u can update to nougat using this unofficial recovery,all AOSP,CM based Nougat roms are compatible with this..
cva_kabil said:
The one u flashed ll not work in oos 3.x.x as u r in new bootloader,
Try flashing this one.. this ll work https://www.androidfilehost.com/?fid=457095661767115910
Click to expand...
Click to collapse
how do you edit the thread title so it's [solved] ?
medick_ said:
how do you edit the thread title so it's [solved] ?
Click to expand...
Click to collapse
Found Go to edit, then advanced edit :good:
cva_kabil said:
Found Go to edit, then advanced edit :good:
Click to expand...
Click to collapse
i know who to contact when i have another problem ;p Thanks a lot
medick_ said:
i know who to contact when i have another problem ;p Thanks a lot
Click to expand...
Click to collapse
Lol happy to help
cva_kabil said:
Lol happy to help
Click to expand...
Click to collapse
hahahah unbelievable phone won't boot after installing superSU any advice
medick_ said:
hahahah unbelievable phone won't boot after installing superSU any advice
Click to expand...
Click to collapse
Welcome back use this one https://www.androidfilehost.com/?fid=24591000424944601
cva_kabil said:
Welcome back use this one https://www.androidfilehost.com/?fid=24591000424944601
Click to expand...
Click to collapse
quick question how do i place this in my internal storage since it won't boot
medick_ said:
quick question how do i place this in my internal storage since it won't boot
Click to expand...
Click to collapse
Connect ur device with usb cable to pc while u r in twrp screen...
cva_kabil said:
Connect ur device with usb cable to pc while u r in twrp screen...
Click to expand...
Click to collapse
thanks, i had to boot recovery with out usb cable else it wouldnt find my phone. I tried deleting the supersu before i came for help but it wouldnt find my phone
SOLVED & THREAD CLOSED
Hi,
searched a lot of Threads but no one helped. is there an all in one Solution to get stock Firmware and Recovery back? I tried at last this one: https://forum.xda-developers.com/zenwatch-2/help/watch-update-failing-factory-image-t3573236 but as soon i try to reboot to twrp i get the Error
Code:
[email protected]:~# fastboot boot twrp-v3.0.0-0.jk-v3.recovery.img
downloading 'boot.img'...
OKAY [ 0.369s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.757s
So please help
Thanks in advance
no one?
Gesendrt aus der Tardis aus irgendeiner Zeit
Which model do you have? There's the WI501Q and WI502Q.
Lrs121 said:
Which model do you have? There's the WI501Q and WI502Q.
Click to expand...
Click to collapse
Ah sorry, its the "big" one WI501Q
KleinerKObold said:
Ah sorry, its the "big" one WI501Q
Click to expand...
Click to collapse
Try using this TWRP image. I keep it up to date so it might help you get through the guide.
http://lrsservers.org/downloads/devices/asus/sparrow/
Lrs121 said:
Try using this TWRP image. I keep it up to date so it might help you get through the guide.
http://lrsservers.ddns.net/download/devices/asus/sparrow/twrp-jenkins-sparrow.img
Click to expand...
Click to collapse
Thanks for the file but i coldnt get to twrp. as soon as i type
fastboot boot twrp-v3.0.0-0.jk-v3.recovery.img
i get the Errror
downloading 'boot.img'...
OKAY [ 0.369s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.757s
Is there a chance that i get the watch working again?
KleinerKObold said:
Thanks for the file but i coldnt get to twrp. as soon as i type
fastboot boot twrp-v3.0.0-0.jk-v3.recovery.img
i get the Errror
downloading 'boot.img'...
OKAY [ 0.369s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.757s
Is there a chance that i get the watch working again?
Click to expand...
Click to collapse
I'm not sure, it looks like they may changed something's in the boot that need addressing with twrp.
Lrs121 said:
I'm not sure, it looks like they may changed something's in the boot that need addressing with twrp.
Click to expand...
Click to collapse
Got it, i have to download another TWRP Image now i have my watch working again. But i nedd still a plain stock rom because i have still some that have dnot be there if i have a Stockrom (Advanced Settings and Wear Root check) but how do i get a stock rom?
KleinerKObold said:
Got it, i have to download another TWRP Image now i have my watch working again. But i nedd still a plain stock rom because i have still some that have dnot be there if i have a Stockrom (Advanced Settings and Wear Root check) but how do i get a stock rom?
Click to expand...
Click to collapse
https://forum.xda-developers.com/zenwatch-2/general/dump-zenwatch-2-sparrow-wi501q-build-t3578459
https://forum.xda-developers.com/zenwatch-2/general/m6e69n-twrp-backup-stock-boot-firmware-t3484961
Thread Closed
Thread Closed
Dude, this may work on the xt1772??
If no, you can port to it??
If you need something like the boot image, i can give upload one
Sorry for my english
hetor99 said:
Dude, this may work on the xt1772??
If no, you can port to it??
If you need something like the boot image, i can give upload one
Sorry for my english
Click to expand...
Click to collapse
No, its not working in XT1772.
Please upload your device recovery image & boot image here.
Francesco Franz said:
No, its not working in XT1772.
Please upload your device recovery image & boot image here.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1jbSjLAMabwDar9tcc_VCSlPCNFVizWt1/view?usp=drivesdk
https://drive.google.com/file/d/1tKGXsT4qSkSoXj17Ur-QsdgsGtl1Fz_Q/view?usp=drivesdk
hetor99 said:
https://drive.google.com/file/d/1jbSjLAMabwDar9tcc_VCSlPCNFVizWt1/view?usp=drivesdk
https://drive.google.com/file/d/1tKGXsT4qSkSoXj17Ur-QsdgsGtl1Fz_Q/view?usp=drivesdk
Click to expand...
Click to collapse
Wait, until i upload a test version of twrp here?
After installing stock rom,i m not getting any info(shows null) on SKU in fast boot mode.please help
RagChith said:
After installing stock rom,i m not getting any info(shows null) on SKU in fast boot mode.please help
Click to expand...
Click to collapse
Me too, my device is the xt1772 and as you said, on the bootloader doesn't show any info, sku, model, imei and some other info, but the device is working well when it boot
---------- Post added at 06:47 PM ---------- Previous post was at 06:11 PM ----------
Francesco Franz said:
Wait, until i upload a test version of twrp here?
Click to expand...
Click to collapse
Sure guy, i will wait
@hetor99
You have to wait till this sunday.
Francesco Franz said:
@hetor99
You have to wait till this sunday.
Click to expand...
Click to collapse
It's fine dude, take your time
Im working on build LOS 14.1 for the mediatek variant, but i dont know how to build twrp
hetor99 said:
Me too, my device is the xt1772 and as you said, on the bootloader doesn't show any info, sku, model, imei and some other info, but the device is working well when it boot
Click to expand...
Click to collapse
Don't worry about it, it is kind of normal behavior in the fastboot mode
Sent from my Nexus 7 using Tapatalk
sir ............ can we flash using SP flash tool
rsmani1965 said:
sir ............ can we flash using SP flash tool
Click to expand...
Click to collapse
Yes, you can. But only when you have a working scatter file else use fastboot method.
#UPDATE
Click Here For TWRP Recovery For Moto E4 Plus XT1772 MediaTek Variant !
@Francesco Franz
Well, i think that the recovery is working fine, i tried the functios of wiping partitions like a factory reset and works, it detects the adoptable storage, the unique "bug" is when the recovery boot and stuck on black screen like on other variants.
I tried to take sc from all the options but i dont understand the lenguage that have the recovery pre-selected.
sorry for my english and any misunderstood
I get the following
PS C:\adb> fastboot flash recovery twrp.img
target reported max download size of 134217728 bytes
sending 'recovery' (13618 KB)...
OKAY [ 0.339s]
writing 'recovery'...
OKAY [ 0.394s]
finished. total time: 0.745s
Nothing changes in my phone i think.
Recovery mode is still the same No command with the dude on his back
DrunkenPanda2000 said:
I get the following
PS C:\adb> fastboot flash recovery twrp.img
target reported max download size of 134217728 bytes
sending 'recovery' (13618 KB)...
OKAY [ 0.339s]
writing 'recovery'...
OKAY [ 0.394s]
finished. total time: 0.745s
Nothing changes in my phone i think.
Boot to Recovery mode is still the same No command with the dude on his back
EDIT:
Apearantly i have a model 1762 And not 1772 Annyne got anny tips on how t proceed is this a fulitele task or will someone be a hero once again?
Click to expand...
Click to collapse
DrunkenPanda2000 said:
DrunkenPanda2000 said:
I get the following
PS C:\adb> fastboot flash recovery twrp.img
target reported max download size of 134217728 bytes
sending 'recovery' (13618 KB)...
OKAY [ 0.339s]
writing 'recovery'...
OKAY [ 0.394s]
finished. total time: 0.745s
Nothing changes in my phone i think.
Boot to Recovery mode is still the same No command with the dude on his back
EDIT:
Apearantly i have a model 1762 And not 1772 Annyne got anny tips on how t proceed is this a fulitele task or will someone be a hero once again?
Click to expand...
Click to collapse
Already mentioned its for xt1772 not xt1762.
Upload your device recovery and boot image. i will make one for you.
Click to expand...
Click to collapse
hetor99 said:
@Francesco Franz
Well, i think that the recovery is working fine, i tried the functios of wiping partitions like a factory reset and works, it detects the adoptable storage, the unique "bug" is when the recovery boot and stuck on black screen like on other variants.
I tried to take sc from all the options but i dont understand the lenguage that have the recovery pre-selected.
sorry for my english and any misunderstood
Click to expand...
Click to collapse
Its not a bug anymore since it takes few secs to enter into recovery mode. Black screen issue not at all. since you have a working twrp in your device. if theirs a black screen issue you will be on default recovery.
will fix the language bug soon.
@DrunkenPanda2000
That is because this section of xda is for the moto e4 plus, not the e4
the moto e4 already have twrp and to many roms on development
Hi,
Last week I got my phone stuck in a bootloop which led to me making a lot of mistakes, I flashed a boot.img as a kernel, I deleted my entire software, and I lost a lot of files. I currently have my phone in an error mode, it says I have to update the system again. I have access to fastboot but I do not have access to twrp (flashing the recovery doesn't work).
Can anyone help me with this problem?
pim8181 said:
Hi,
Last week I got my phone stuck in a bootloop which led to me making a lot of mistakes, I flashed a boot.img as a kernel, I deleted my entire software, and I lost a lot of files. I currently have my phone in an error mode, it says I have to update the system again. I have access to fastboot but I do not have access to twrp (flashing the recovery doesn't work).
Can anyone help me with this problem?
Click to expand...
Click to collapse
Is a really fastboot mode or error mode?
If it is fastboot what you see, Phone unlocked and FRP unlock?
kilroystyx said:
Is a really fastboot mode or error mode?
If it is fastboot what you see, Phone unlocked and FRP unlock?
Click to expand...
Click to collapse
I can get in both fastboot and error mode, I think fastboot is the most useful. It says PHONE Unlocked and FRP unlocked.
pim8181 said:
I can get in both fastboot and error mode, I think fastboot is the most useful. It says PHONE Unlocked and FRP unlocked.
Click to expand...
Click to collapse
-Do you know exactly which files or partitions did you mess?
-What is your region code and build number?
If you don’t know run this command is fastboot mode => fastboot oem get-build-number
-Do you have a TWRP backup from your device?
kilroystyx said:
-Do you know exactly which files or partitions did you mess?
-What is your region code and build number?
If you don’t know run this command is fastboot mode => fastboot oem get-build-number
-Do you have a TWRP backup from your device?
Click to expand...
Click to collapse
I don't know for sure which parts I messed up, but I do know these thing: I don't have an OS installed, and my kernel is a boot.img.
I don't know my region number for sure, but according to this post: https://forum.xda-developers.com/8-lite/how-to/huawei-regional-codes-t3740473 it should be C432.
My build number is ANE-LX1 8.0.0.126 (C432) and I should have a TWRP backup on my sd card from the moment my phone was only bootlooping.
pim8181 said:
I don't know for sure which parts I messed up, but I do know these thing: I don't have an OS installed, and my kernel is a boot.img.
I don't know my region number for sure, but according to this post: https://forum.xda-developers.com/8-lite/how-to/huawei-regional-codes-t3740473 it should be C432.
My build number is ANE-LX1 8.0.0.126 (C432) and I should have a TWRP backup on my sd card from the moment my phone was only bootlooping.
Click to expand...
Click to collapse
Do you have currently TWRP installed?
-Boot in the TWRP recovery and restore your backup.
-If your backup don't have all partitions let me know and I'll send you what is missing.
If you currently don't have TWRP installed?
-Go to fastboot mode and flash this TWRP
If boot then should be ok.
If remains bootlooping then you can wipe cache and reboot
If remains bootlooping you can test flash B126 with HuRUpdater
kilroystyx said:
Do you have currently TWRP installed?
-Boot in the TWRP recovery and restore your backup.
-If your backup don't have all partitions let me know and I'll send you what is missing.
If you currently don't have TWRP installed?
-Go to fastboot mode and flash this TWRP
If boot then should be ok.
If remains bootlooping then you can wipe cache and reboot
If remains bootlooping you can test flash B126 with HuRUpdater
Click to expand...
Click to collapse
I can't install TWRP, I currently install it by flashing the file as a recovery_ramdisk.
After it is flashed I execute the command fastboot reboot and hold volume up whilst disconnecting my phone from my PC.
Do you have any tips?
pim8181 said:
I can't install TWRP, I currently install it by flashing the file as a recovery_ramdisk.
After it is flashed I execute the command fastboot reboot and hold volume up whilst disconnecting my phone from my PC.
Do you have any tips?
Click to expand...
Click to collapse
No, you are doing right. Can you post the output from fastboot during the installation?
kilroystyx said:
No, you are doing right. Can you post the output from fastboot during the installation?
Click to expand...
Click to collapse
Code:
fastboot flash recovery_ramdisk TWRP_3.2.1-0_ANE-LX1_Full_01.img
gives:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (24962 KB)...
OKAY [ 0.689s]
writing 'recovery_ramdisk'...
OKAY [ 0.122s]
finished. total time: 0.811s
Since I can't boot in TWRP by holding down the volume up button when rebooting I tried to use the boot command:
Code:
fastboot boot TWRP_3.2.1-0_ANE-LX1_Full_01.img
downloading 'boot.img'...
OKAY [ 0.690s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.695s
pim8181 said:
Code:
fastboot flash recovery_ramdisk TWRP_3.2.1-0_ANE-LX1_Full_01.img
gives:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (24962 KB)...
OKAY [ 0.689s]
writing 'recovery_ramdisk'...
OKAY [ 0.122s]
finished. total time: 0.811s
Since I can't boot in TWRP by holding down the volume up button when rebooting I tried to use the boot command:
Code:
fastboot boot TWRP_3.2.1-0_ANE-LX1_Full_01.img
downloading 'boot.img'...
OKAY [ 0.690s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.695s
Click to expand...
Click to collapse
I don't believe that fastboot boot can work...
That is strange...
Can you flash TWRP one more time?
After successful flash don't use the command fastboot reboot
Unplug the USB cable and press ON/OFF and VOL+ and stay pressings until you see TWRP screen.
kilroystyx said:
I don't believe that fastboot boot can work...
That is strange...
Can you flash TWRP one more time?
After successful flash don't use the command fastboot reboot
Unplug the USB cable and press ON/OFF and VOL+ and stay pressings until you see TWRP screen.
Click to expand...
Click to collapse
It didn't work , maybe I can flash the stock system image from fastboot?
pim8181 said:
It didn't work , maybe I can flash the stock system image from fastboot?
Click to expand...
Click to collapse
Yes, system, cust, recovery_ramdisk.... all partions that might be mess by you.
kilroystyx said:
Yes, system, cust, recovery_ramdisk.... all partions that might be mess by you.
Click to expand...
Click to collapse
I don't know how to get these ones can you explain it to me?
pim8181 said:
I don't know how to get these ones can you explain it to me?
Click to expand...
Click to collapse
Check this thread, this applies to recovery_ramdisk but for all other partitions is the same.
kilroystyx said:
Check this thread, this applies to recovery_ramdisk but for all other partitions is the same.
Click to expand...
Click to collapse
It worked, many thanks for your help!
For those that have issues with the programme, I had to uncheck the verify header checksum button in the settings file in order for it to work properly.
kilroystyx said:
Do you have currently TWRP installed?
-Boot in the TWRP recovery and restore your backup.
-If your backup don't have all partitions let me know and I'll send you what is missing.
If you currently don't have TWRP installed?
-Go to fastboot mode and flash this TWRP
If boot then should be ok.
If remains bootlooping then you can wipe cache and reboot
If remains bootlooping you can test flash B126 with HuRUpdater
Click to expand...
Click to collapse
I guess I spoke too soon, I can get my phone in TWRP but it continues to bootloop.
pim8181 said:
I guess I spoke too soon, I can get my phone in TWRP but it continues to bootloop.
Click to expand...
Click to collapse
Did you do wipes?
If didn't work use your TWRP backup or use HuRUpdater
kilroystyx said:
Did you do wipes?
If didn't work use your TWRP backup or use HuRUpdater
Click to expand...
Click to collapse
My TWRP is completely lost and the tool doesn't seem to work, I wiped data cache and dalvik.
When you flash a rom aren't you just supposed to flash the rom itself, when I bricked my phone by installing Xposed I just reflashed the rom it's sytem image and a boot image. How should I do it?
C:\Android>fastboot devices
317251cf fastboot
C:\Android>fastboot erase data
erasing 'data'...
FAILED (remote: Check device console.)
finished. total time: 0.004s
Hello,
I want to erase data because i can't do this unbrick method (https://forum.xda-developers.com/one...lus-6-t3796665)
despite that it worked before.
(and the Msm recovery don't work)
this problem appeared after many successful uses of the method mentioned above. The problem appeared after wanting to install an older rom on my OP6 for downgrade the play services
I am desperate, I searched for hours and hours on the internet so if a little genius goes through, a little help would not be refused
Awehweh said:
C:\Android>fastboot devices
317251cf fastboot
C:\Android>fastboot erase data
erasing 'data'...
FAILED (remote: Check device console.)
finished. total time: 0.004s
Hello,
I want to erase data because i can't do this unbrick method (https://forum.xda-developers.com/one...lus-6-t3796665)
despite that it worked before.
(and the Msm recovery don't work)
this problem appeared after many successful uses of the method mentioned above. The problem appeared after wanting to install an older rom on my OP6 for downgrade the play services
I am desperate, I searched for hours and hours on the internet so if a little genius goes through, a little help would not be refused
Click to expand...
Click to collapse
Flash a compatible recovery first by dv minimal tools from PC to phone,in fastboot mode,if you cannot enter in twrp
Sent from my LEX820 using Tapatalk
bilausdaniel said:
Flash a compatible recovery first by dv minimal tools from PC to phone,in fastboot mode,if you cannot enter in twrp
Sent from my LEX820 using Tapatalk
Click to expand...
Click to collapse
it dont work, its possible to have recovery stock ?
Awehweh said:
it dont work, its possible to have recovery stock ?
Click to expand...
Click to collapse
Don't know about stock twrp...ask in telegram group.but you tried latest official twrp to flash it by adb in fasboot mode?press volume up and power both time 15 seconds,
Sent from my LEX820 using Tapatalk
bilausdaniel said:
Don't know about stock twrp...ask in telegram group.but you tried latest official twrp to flash it by adb in fasboot mode?press volume up and power both time 15 seconds,
Sent from my LEX820 using Tapatalk
Click to expand...
Click to collapse
yes i already did it