my phone is a Galaxy A10 and I'm using the Optx 2.5 Oneui 3.1 rom, when trying to install any mod that uses Key-select it gives the bug showing the numerical options infinitely in a loop, this occurs in any mod that uses this practice, I've already tried to reinstall several times these types of modes without success, I already installed Lineoage Os 18.1 and I still have the bug. Please someone help me, I have no idea how to solve the problem,. thanks!
Related
Hello,
First, I want to say that I hope this is in the right subforum. Otherwise, please, move this thread.
So I have a big issue with using Cyanogenmod 12 and 13 on two totally different devices; the international version of Samsung's Galaxy S4, and the OnePlus One. Installing either version of Cyanogenmod works perfect, but as soon as OpenGApps is flashed (Tried nano, pico...) and Android is loaded up, it gets stuck in an infinite stream of crash messages, telling me that "Unfortunately, the process com.google.process.gapps has stopped."
I have found a fix. BUT this only works on CM13. If you click-spam your way through the first time launcher, then navigate to Settings and find System Restore and perform said operation, then the crashes with magically go away and the phone will run without any problems at all. This is good enough for my OnePlus One.
However: There is no stable build of CM13 for the Galaxy S4 international, in the latest Nightly-build I tried for it, call audio was not working at all.
Does anyone know why this is happening, and how do I go about fixing this, other than the solution I found above?
Help is much appreciated!
I really suspect it being an OpenGApps issue. Though I do not understand why as the same build/phone has worked fine with it before.
Are there any reliable alternatives?
I have a sprint note 4. I don't have it activated currently and use it as a tablet of sorts. Recently it's been giving me problems and I've wanted to break it. I got it about 2 years ago, and since then I rooted it, then installed twrp recovery, then flashed custom software. The software I used was called Dr.Ketans I believe, it combined the note 5 and s6 edge plus softwares. It started to crash occasionally so I installed cyanogenmod onto it. It worked for a bit, but now when Turing the device on, it takes like 10-15 minutes to boot up. And it only stays on for 5 minutes before it crashes and freezes. When it does that, the only way I can boot it up again is take the batter out and put it back in a few times because sometimes I get an error message. The error message barely happens but it says something along the line of "cant boot up". If I use twrp, my phone doesn't freeze. I've tried reinstalling the software, I've tried formatting the entire phone and refreshing. Nothing seems to work. I've even tried changing my kernel but I'm not entirely sure what it is, and how it affects the phone. I'm not the smartest with phones, but I'm good with following directions and googling. If anybody can help me I'd greatly appreciate it cause I've been dealing with this issue for 3 months.
Reinstall the original firmware and make sure it doesn't freeze / crash with it and then you can reinstall the custom software. Make sure that you have the required recovery, bootloader, and baseband version to run the newer custom roms. The requirements should be located in the OP.
I appreciate the response. I will try this as soon as possible. Should i use odin to flash or would it be possible to use twrp recovery? Also, what do you mean when you say the requirements are in the OP?
You should use Odin to recover to make sure you have a fresh start.
The requirements of the rom you pick afterwards should be in the OP.
Hello,
It's been 2 weeks I am trying to make the fingerprint options show on my Leagoo Power 5, that has a 6763V SOC.
It happened after I installed TWRP and formatted the data the first time. After that, I have reinstalled both stock firmware that exist for this device, but no chance to see this feature. I formatted it and did that more than 20 times.
I even installed other firmware like AOSP, AEX, Havok OS, Lineage OS 16, but no one of all these was able to see the fingerprint settings inside Android (not existing).
I noticed that another user of Leagoo Power 2 has opened a thread in another forum, and he has the same issue.
Could it be that there is a fingerprint partition hidden in the system, that might deleted or corrupted, or something like that?
I tried to use logcat, while touching the fingerprint and I get several errors, which means the hardware is working, but it must be a software issue.
I have attached the output of the logcat file, where it shows HAL issues.
Would appreciate if anybody has any idea how to solve this.
PS: Where can I add this device to XDA, and contribute with formwares that work with it, TWRP, boot unlocking and common issues, solutions ?
Hi everybody, excuse me because i'm a newbie.
After many tries, i have been able to flash a new rom on my Galaxy J320FN (if uou are interested on the method and toos that i used :
Install Twrp 3.0.2 (the only one i have been able to download using Odin, all the other newer releases seemd good downloaded but in the reboot were replaced by original Samsung recovery).
After the install of Twrp i followed the procedure, cleaning data, cache and flashing Lineage OS214 and in a second moment the Gapps package.
The phone is much more better than with old Android 5.1 originally installed and everything works fine except the Wifi.
I can see all the ssids near to me but when i try to connect i can see that the devices makes many tries (i see Connecting) and after a while writes (Saved).
The tries continue and while the device says Connecting i see a toast message (Password may be incorrect) but the password is good because with the same password i connect with my notebook.
I have googled and i found someone that had my same simptoms after flashing Lineage Os214, in some cases one of them solved with some tips in developer section, in other cases , changing the Country in the advanced section of the wifi Menu, but noone of these solutions worked for me.
Is there someone that can help me to solve the problem ?
Another question, is Lineage Os14 the newer rom for my Galaxy SMJ320FN ?
Same here!
maurososcia said:
Hi everybody, excuse me because i'm a newbie.
After many tries, i have been able to flash a new rom on my Galaxy J320FN (if uou are interested on the method and toos that i used :
Install Twrp 3.0.2 (the only one i have been able to download using Odin, all the other newer releases seemd good downloaded but in the reboot were replaced by original Samsung recovery).
After the install of Twrp i followed the procedure, cleaning data, cache and flashing Lineage OS214 and in a second moment the Gapps package.
The phone is much more better than with old Android 5.1 originally installed and everything works fine except the Wifi.
I can see all the ssids near to me but when i try to connect i can see that the devices makes many tries (i see Connecting) and after a while writes (Saved).
The tries continue and while the device says Connecting i see a toast message (Password may be incorrect) but the password is good because with the same password i connect with my notebook.
I have googled and i found someone that had my same simptoms after flashing Lineage Os214, in some cases one of them solved with some tips in developer section, in other cases , changing the Country in the advanced section of the wifi Menu, but noone of these solutions worked for me.
Is there someone that can help me to solve the problem ?
Another question, is Lineage Os14 the newer rom for my Galaxy SMJ320FN ?
Click to expand...
Click to collapse
I am in a similar situation with my OnePlus.
Hello, I've recently installed the H-ROM S20 Port by Astrako.
It was working fine until after a few days I realized that Wi-Fi is not working when my friend tried to give me hotspot (It was the first time I was accessing Wi-Fi on Astrako's masterpiece).
I realized this was a big annoyance so I decide to go back to my J6 stock ROM only to find that SAMSUNG doesn't allow for downloading ROMS (The error while flashing the stock ROM was something like: sw rev. check fail (bootloader) device: 9 binary: 7).
I tried several ways of flashing the stock ROM, even tried flashing single components like CSC, BL, AP alone but it always gave me that error and resulted into a soft brick.
I managed to get around the soft brick by booting into TWRP and flashing H-ROM again. But after this episode, the SIM won't work either in addition to the already broken Wi-Fi.
Searchs around the Internet have suggested that it is the `efs` partition that is broken. All tutorials suggested to restore the efs partition but I did not have a backup so nothing to do. Another solution suggested messing with USSD codes like `*#06#` which always made the Phone app to go unresponsive.
So these are the possible solutions:
- Is there a way to allow downgrading of ROMs so that I flash the stock ROM?
- Someone with a J600G can provide me with their EFS backup
- Somehow fix the Wi-Fi/SIM issues otherwise because these issues are definitely not H-ROM's side effects.
Some screenshots