Hi, I'm trying to use erecovery to download latest system update. It got a little broken in system and I can't seem to reset.
So, why am I writing here? My display is broken and I can see only the very bottom part (like 15%). And I also didn't find any pictures taking a deep look at erecovery.
My request is, if someone can show me everything I can do in erecovery so I know where to tap and what I'm actually doing. For example if I go to wipe data (or atleast I think, because I can't see that aswell) I see a keyboard and that's it. I don't know what's above.
So, can anyone please send me pictures of erecovery?
Edit: My bootloader is unlocked if that helps.
Sucharek 233 said:
For example if I go to wipe data (or atleast I think, because I can't see that aswell) I see a keyboard and that's it
Click to expand...
Click to collapse
if you see the keyboard in Recovery mode, then you are not in that mode or the screen is completely destroyed. On the other hand, you can navigate in the Recovery/eRecovery menu using the buttons, so you don't need touch. The problem will probably be when you get to the "Select wifi network" point, imo. Maybe it would be better to use the service ROM and dload method. But this process will erase your data and lock the bootloader.
-Alf- said:
if you see the keyboard in Recovery mode, then you are not in that mode or the screen is completely destroyed. On the other hand, you can navigate in the Recovery/eRecovery menu using the buttons, so you don't need touch. The problem will probably be when you get to the "Select wifi network" point, imo. Maybe it would be better to use the service ROM and dload method. But this process will erase your data and lock the bootloader.
Click to expand...
Click to collapse
If I bend the display a little I get a glimpse of what's on top of the screen and I got an error (couldn't get info).
Related
Hi,
I HAVE GOT A VERY BIG PROBLEM.After i installed the App AutoRec(i had TWRP befoe,but i thougt when i install it it updates TWRP to a newer version) my phone only starts in Fastboot Mode-no DownloadMode-no Recovery Mode.
After that i erased all the things(aboot,boot,cache,system,laf,....) und flashed them again,after that the Phone only starts until the LgLogo then it stops.No Fastboot,no recovery,no DownloadMode.When I Press VolumeUp+PowerOff i get into the Factory Reset.When i press on Erase all user data&restore default settings?---When i press Yes the phone the logo comes an on the left up side stands"Error:boot ceryfication verify
Secure Boot error
Cause :Boot cerification verify
After that the display is black,and i have to restart the Phone.
When i press all 3 buttons on my phone,i got into the hardware key control mode,does me help that everthing?
When i plug in the phone in my pc,it says "unknown device",when i use to do something with fastboot it says"waiting for device"?
Please help me,what can i do?I have the Phone only since 2 two days,an i wouldnt lost it Unhappy
Sorry for my bad english
Can you still get into twrp? With the phone off hold power and vol down til LG logo comes up the release and press again after. Should take you to a menu, just hit yes. If it takes you to recovery just hit factory reset and it'll,take you to twrp. If so, I'd recommend putting a Rom onto an sd and flashing it. You'll lose everything but it's better then losing this beautiful phone
Ilikecheese said:
Can you still get into twrp? With the phone off hold power and vol down til LG logo comes up the release and press again after. Should take you to a menu, just hit yes. If it takes you to recovery just hit factory reset and it'll,take you to twrp. If so, I'd recommend putting a Rom onto an sd and flashing it. You'll lose everything but it's better then losing this beautiful phone
Click to expand...
Click to collapse
You obviously didnt read his post correctly. He stated that when he gets to the factory reset area which leads you to Recovery Mode/TWRP it shows the LG logo appears and nothing happens.
As for you my friend if you are able to somehow get into download mode with a button combination you have a chance at saving yourself by using a TOT or KDZ file to restore your phone to stock software. But i also have a question for you.........Why the hell would you allow an app to flash a recovery file that has nothing to do with BUMP'D? The Bump'd recovery for our phones is specific to our phones! You should never auto update any recovery unless stated its ok from the Bump'd developers, Which they never did or will because our TWRP Recoveries are different than any other phones because of the bump'd implementations with in them and the boot.img's. Sounds to me like you may have screwed up your partitions and/or boot stack. Your are better going on IRC and requesting the help of TheCubed/IOMonster and AutoPrime, but mark my words you will face some heavy criticism from members of the IRC channel when you explain this story to them. But they are always willing to help.
I dont know why i have done it,im new on Lg.Before i had an HTC there is so many other.I will aks that guys.I hope i can save my new phone.
But the Problem is,i dont get into download Menu,i did everthing
same thing
I am i the same problem. I am stuck and can only get to the hardware menu.
vaughnr said:
I am i the same problem. I am stuck and can only get to the hardware menu.
Click to expand...
Click to collapse
Same problem too.
1. no download mode, no fastboot no recovery.
2. In windows, g2 is detected as LGE Androidnet and modem when is on lg screen. Green and blue led flash.
3. Stuck on lg screen
When I try to enter download mode it stay stucked on download image, no firmware upgrade.
Thanks
Try using board diag if you're not getting dl mode: http://forum.xda-developers.com/showthread.php?t=3132359
malhovic said:
Try using board diag if you're not getting dl mode: http://forum.xda-developers.com/showthread.php?t=3132359
Click to expand...
Click to collapse
Not sure it will work.
I have G2. Tryed the G2 metod but nothing.
Thanks guys,
I managed to get back my phone. I had to put it on qualcomm 9008 and after that to flash again all files.
Best regards.
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account
I have problem with getting back to stock fullmics 5.5 on h850. I have installed it reboot and now Im stuck in secure start-up lock pattern from previous rom I believe. Pattern wont work and also meanwhile "FC system UI has stopped" warning is showing all the time.
I can get into download mode but port is not recgonized in vista so ADB cant be used (WHQL usb drivers 4.4.2 are installed ok)
problem is also that I cant get into recovery mode or
factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect.
Im really getting out of ideas to solve this...tech brain of the world please gather for help
fonejay said:
I have problem with getting back to stock fullmics 5.5 on h850. I have installed it reboot and now Im stuck in secure start-up lock pattern from previous rom I believe. Pattern wont work and also meanwhile "FC system UI has stopped" warning is showing all the time.
I can get into download mode but port is not recgonized in vista so ADB cant be used (WHQL usb drivers 4.4.2 are installed ok)
problem is also that I cant get into recovery mode or
factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect.
Im really getting out of ideas to solve this...tech brain of the world please gather for help
Click to expand...
Click to collapse
Go into twrp format data type yes how I fixed it on mine
TheMadScientist said:
Go into twrp format data type yes how I fixed it on mine
Click to expand...
Click to collapse
Why dont you fully read what I wrote
"...problem is also that I cant get into recovery mode or factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect."
ps: please excuse my writing my first language is clearly not english :fingers-crossed:
edit: just right now I opened phone up for check if buttons are OK...well turns out I wrecked button pins on motherboard.f*ck...now I know why I cant get into powerup menus...more specific I wrecked power button down pin on MB while opening back case with plastic card fkmylajf. Can be closed. SORRX
edit2: luckly I solved problem with straighteing pins so now twrp works as it should. What a noobish mistake huh...Be careful w with opening case!!??!
fonejay said:
Why dont you fully read what I wrote
"...problem is also that I cant get into recovery mode or factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect."
ps: please excuse my writing my first language is clearly not english :fingers-crossed:
edit: just right now I opened phone up for check if buttons are OK...well turns out I wrecked button pins on motherboard.f*ck...now I know why I cant get into powerup menus...more specific I wrecked power button down pin on MB while opening back case with plastic card fkmylajf. Can be closed. SORRX
edit2: luckly I solved problem with straighteing pins so now twrp works as it should. What a noobish mistake huh...Be careful w with opening case!!!
Click to expand...
Click to collapse
Sorry bout that mate I speed read a lot of stuff and sometimes miss Key details:silly::silly:
I ran into the problem with the corrupt startup and couldn't get out of it.So thats what I saw...
I run across a lot of devices so i spend a lot of time reading many many pages hard to catch it all
When I tried to get on my Moto G Power phone yesterday, it would not boot up. It goes to the blue Motorola screen, waits a minute, goes black and restarts again. After awhile (10-ish minutes) it goes to "fastboot" screen with the "dead" android on its back opened up. The displays says "USB connected" but the phone does not display in Windows 10 (file explorer) as a drive or a network device. To my knowledge, the USB file transfer option is NOT enabled and I cannot get to it anyway since the phone won't boot up. I can only power it off (the state when I plug it in and it shows the charging icon percentage only) by selecting "power off" in one of the two "android" recovery screens (fast boot and the menu select mode).
I have downloaded the "Rescue and Smart Assistant" application but it does not "recognize" the phone for anything EXCEPT it DOES see the phone enough to find and suggest what firmware I need to load to "rescue" the phone! Of course that deletes all my data (pictures, contacts, etc.). While doing this, nothing is displayed in windows explorer.
Bottom line -- Based on it "seeing" the phone and suggesting firmware I THINK I can recover/repair the phone by "factory resetting" it, but FIRST I want to be sure no one at Motorola and/or this forum has any suggestions and how to get my files off the phone. I am willing to send it in for "repair" if they will try to get the files before resetting and/or replacing the phone. Yes I have gotten into the other "menu select" screen that lists the options and comes up by holding the power button down and tapping volume up. I went through everything in there that I though might work (other than factory reset).
Anyone out there have any suggestions or tools I should try? Thanks!
Headdog said:
When I tried to get on my Moto G Power phone yesterday, it would not boot up. It goes to the blue Motorola screen, waits a minute, goes black and restarts again. After awhile (10-ish minutes) it goes to "fastboot" screen with the "dead" android on its back opened up. The displays says "USB connected" but the phone does not display in Windows 10 (file explorer) as a drive or a network device. To my knowledge, the USB file transfer option is NOT enabled and I cannot get to it anyway since the phone won't boot up. I can only power it off (the state when I plug it in and it shows the charging icon percentage only) by selecting "power off" in one of the two "android" recovery screens (fast boot and the menu select mode).
I have downloaded the "Rescue and Smart Assistant" application but it does not "recognize" the phone for anything EXCEPT it DOES see the phone enough to find and suggest what firmware I need to load to "rescue" the phone! Of course that deletes all my data (pictures, contacts, etc.). While doing this, nothing is displayed in windows explorer.
Bottom line -- Based on it "seeing" the phone and suggesting firmware I THINK I can recover/repair the phone by "factory resetting" it, but FIRST I want to be sure no one at Motorola and/or this forum has any suggestions and how to get my files off the phone. I am willing to send it in for "repair" if they will try to get the files before resetting and/or replacing the phone. Yes I have gotten into the other "menu select" screen that lists the options and comes up by holding the power button down and tapping volume up. I went through everything in there that I though might work (other than factory reset).
Anyone out there have any suggestions or tools I should try? Thanks!
Click to expand...
Click to collapse
Moto service will not save your data/photos.
If adb debugging was not enabled, and the bootloader is locked, you likely will not have any success.
You can try reflashing the firmware manually using the LMSA firmware.
Use LMSA to download the firmware but do not select Rescue Now.
Find downloaded firmware
Use Online FlashFile Converter to get the correct flash commands commands
Before flashing, remove this line if it's there.
Code:
fastboot erase userdata
If you get some errors, post them here.
Motorola bootloader will throw errors, but still, boot
if it will not boot see
Having trouble flashing with a locked bootloader?
If that fails
Your best hope is a data recovery company, that may cost thousands of $$$
sd_shadow said:
Moto service will not save your data/photos.
If adb debugging was not enabled, and the bootloader is locked, you likely will not have any success.
You can try reflashing the firmware manually using the LMSA firmware.
Use LMSA to download the firmware but do not select Rescue Now.
Find downloaded firmware
Use Online FlashFile Converter to get the correct flash commands commands
Before flashing, remove this line if it's there.
Code:
fastboot erase userdata
If you get some errors, post them here.
Motorola bootloader will throw errors, but still, boot
if it will not boot see
Having trouble flashing with a locked bootloader?
If that fails
Your best hope is a data recovery company, that may cost thousands of $$$
Click to expand...
Click to collapse
SD_Shadow:
Thanks for the message. I have used the levono RSA program, hopefully that is what you are referring to by "LMSA firmware". The rescue finds the phone but the firmware it selects DOES NOT match my firmware EXACTLY. Mine says "RPMS31.Q1-54-13.3-5" but the firmware it suggests is "Sofia_Retail_RPMS31.Q1-54-13.3-6_subsidy-CCAWS_regulatory-DE". I have downloaded it and edited the XML file in it. My concern is if I flash in the "-6" version, will it find something "wrong" and either fail or corrupt the files I am trying to save.
I found a version-5 on the mirror site with I am thinking I should use it instead of what it is suggesting. Do you agree? I don't really understand why you are telling me to use "online flashfile converter"? My guess is if I just move the firmware I found into an appropriate folder like the one I downloaded already (the -6 version), how do I tell the RSA program to use the file I want flashed? Is that the reason for the OFC?
You may need to explain that a little bit more and then I will try to burn whichever version you think I should try.
By the way, my model is "XT2041-6". I think it is a Moto G Power (original version, not 2021 or 2022).
HD
Hey SD_Shadow, are you still available? Was hoping you would comment on my last message / questions. If not, it is OK, but I could sure use some confirmation on what I am going to do (load the version -5 instead of the recommended -6). Mainly wondering why you have to convert any commands since it seems like it would load it automatically (at least for the pre-picked -6 version).
also i found many TWRP recovery for the same SoC (https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/ (Mediatek Helio P35 (MT6765))), will it work if I flash it with it?
thanks
horasmichael said:
also i found many TWRP recovery for the same SoC (https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/ (Mediatek Helio P35 (MT6765))), will it work if I flash it with it?
thanks
Click to expand...
Click to collapse
You will not no unless you try it
hi does yours work?
totalnewbielinux said:
hi does yours work?
Click to expand...
Click to collapse
do you have the same phone as him if so yes it will work as it is the same chipset t your phone mine is unofficial more like ported twrp
I am newbie but flashed samsung j7 before, yes I have oppo A15S, however the chipset I am not sure since the phone is come with the maxis/hotlink package that addon a few RM get free phone.
if possible I want official but asked chat GPT and google sadly no result+dead link.
totalnewbielinux said:
I am newbie but flashed samsung j7 before, yes I have oppo A15S, however the chipset I am not sure since the phone is come with the maxis/hotlink package that addon a few RM get free phone.
Click to expand...
Click to collapse
Mediatek MT6765 Helio P35 (12nm) is the chipset of your phone and also if you want an official version youcan compile your own twrp for your self
totalnewbielinux said:
if possible I want official but asked chat GPT and google sadly no result+dead link.
Click to expand...
Click to collapse
here there is an unofficial twrp for your chipset ---------> https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/
Hi my experience flash 1 phone before and that phone at least can boot into (normal mode) > now my oppo can only boot into recovery mode. Is there any way to enable developer mode?
totalnewbielinux said:
Hi my experience flash 1 phone before and that phone at least can boot into (normal mode) > now my oppo can only boot into recovery mode. Is there any way to enable developer mode?
Click to expand...
Click to collapse
what do you mean that your phone is stuck at recovery mode? if not you can enable the developers option this is the steps
1.) Go to setting
2.) Go to About phone
3.) tap the build number 7 times
4.) now quit the setting then open it again
5.) scroll down then choose the developers option
thats how you open developers option
basically when I reboot turn off> it will "never" boot into normal mode. My phone is so broken that pressing power button only still boot into recovery mode, wipe data and reboot still into recovery mode.
totalnewbielinux said:
basically when I reboot turn off> it will "never" boot into normal mode. My phone is so broken that pressing power button only still boot into recovery mode, wipe data and reboot still into recovery mode.
Click to expand...
Click to collapse
can you give a picture of your phone or video while doing it so i know what s the problem?
Sorry for late reply basically my volume key stuck and a week later it can use so I JUST IGNORE NOW WORSE. just now I power off my phone and now I cannot power on my phone (just now charging no problem) now charging does not show anything and my phone bricked...
totalnewbielinux said:
Sorry for late reply basically my volume key stuck and a week later it can use so I JUST IGNORE NOW WORSE. just now I power off my phone and now I cannot power on my phone (just now charging no problem) now charging does not show anything and my phone bricked...
Click to expand...
Click to collapse
your phone seems to be new which means that your volume keys are still new and good so thats not our problem here your phone didin't boot right? did you do something to your system phone like flashing or something? because if you do there is a big chance that you screw up something in your phone resulting it to be like that. now your phone can still be charge right there might be still a hope we just need to reflash your whole firmware ( if the problem is really a firmware) you said before you cant boot right then there must be a problem in the booting process, i tested this on my phone before i clean wipe my whole phone and that include system partition so when i tried to boot my phone it wont and when i charge it no logo would appear just like yours so im guessing that you phone partition is gone and like you said to its bricked now. if thats the case we need to flash the whole firmware
Anonymous V said:
your phone seems to be new which means that your volume keys are still new and good so thats not our problem here your phone didin't boot right? did you do something to your system phone like flashing or something? because if you do there is a big chance that you screw up something in your phone resulting it to be like that. now your phone can still be charge right there might be still a hope we just need to reflash your whole firmware ( if the problem is really a firmware) you said before you cant boot right then there must be a problem in the booting process, i tested this on my phone before i clean wipe my whole phone and that include system partition so when i tried to boot my phone it wont and when i charge it no logo would appear just like yours so im guessing that you phone partition is gone and like you said to its bricked now. if thats the case we need to flash the whole firmware
Click to expand...
Click to collapse
Thanks for reply>to avoid confusion no I did not do anything/flashing/even enable usb debugging to my OPPO A15S. I am total newbie that I flash Samsung J7 once only. The Oppo A15S yes it is 1-2 years only, volume key clicking works fine but after system update via setting>Official Oppo coloros things. My phone kinda messed up volume key not working<google results say because a lot of phone cannot boot up because of volume key. So should I pry open my phone to see the volume key? Or just wait until 1 day scheduled power up happens?
Logs:
Wednesday 5am my phone auto boot up in recovery mode.I press restart and the screen black nothing happens.
Thursday 5am no boot up
Friday no boot up too.
So I assume it is my phone power is low and somehow my auto scheduled power on force my phone to boot up? and that time system auto update causes my phone die in midway?
totalnewbielinux said:
So I assume it is my phone power is low and somehow my auto scheduled power on force my phone to boot up? and that time system auto update causes my phone die in midway?
Click to expand...
Click to collapse
hmm i see you didnt do anything in your phone but you did say that you updated it right? while updating you phone did something happen? like rebooting? if so there might be a chance that it became corrupted because of ,that while in the case of your power button what kind of problem does it have? does it work correctly? or you cant click it like its stuck or something? or maybe the button is working correctly and your phone just doesnt boot up? if the button is really problem like google stated ----->
Why is my OPPO always in Recovery mode?
One of the most common causes is that [B]one of the buttons used to access android system recovery is defective or malfunctioning[/B]. Now, you should first check if the physical buttons are responding properly, especially the volume buttons, before trying to get rid of the Android Recovery Mode.
you should probably check you physical button because that might be a problem and i just remembered i have the same problem in my sisters phone vivo y53 its always stuck in recovery mode and we are confused why did it happen so we bring it to our technician friend and let him fix it and he really fix it he he told me that if something happen like this again check all the buttons correctly. Now there is really problem in you button and you cant just pry in you phone you might break something you should let the professional do it like technician after you fix your button try to boot up again and if its still black screen or recovery then the problem is in the phone system and you can comeback here so we can help you fix it.