Hey everyone,
Just looking for some direction please. I unlocked the bootloader, rooted it no problem (confirmed in magisk), I even got a GSI to boot, but I can't get anything other than stock recovery to boot. Flashing is successful but twrp for the t227u just straight reboots.
I was going to try compiling my own twrp, but wanted to check if it was even possible. I don't read a lot of good things about the t227u.
Thanks
SynchroJ said:
Hey everyone,
Just looking for some direction please. I unlocked the bootloader, rooted it no problem (confirmed in magisk), I even got a GSI to boot, but I can't get anything other than stock recovery to boot. Flashing is successful but twrp for the t227u just straight reboots.
I was going to try compiling my own twrp, but wanted to check if it was even possible. I don't read a lot of good things about the t227u.
Thanks
Click to expand...
Click to collapse
You don't specific twrp for any Android version, and its all don't supported touch screen , you should uses fastbootD.
tom.android said:
You don't specific twrp for any Android version, and its all don't supported touch screen , you should uses fastbootD.
Click to expand...
Click to collapse
Perfect, thank you for saving me hours of pulling out my hair trying to get it to work, lol.
Just patched my recovery image and tested it, fastbootD works beautifully. Thanks so much!
SynchroJ said:
Perfect, thank you for saving me hours of pulling out my hair trying to get it to work, lol.
Just patched my recovery image and tested it, fastbootD works beautifully. Thanks so much!
Click to expand...
Click to collapse
Related
Q&A for [RECOVERY][volantis] TWRP 2.8.2.1 touch recovery [2014-11-18]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][volantis] TWRP 2.8.2.1 touch recovery [2014-11-18]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Skid71 said:
...The .img file is in the same folder I start the command line from. The output reads just like the picture in your guide
At this point I'm wondering if the recovery_fixed.img is supposed to look like stock/aosp and not like TWRP...
Click to expand...
Click to collapse
The same happend to me yesterday. I don't know why. And not, the TWRP recovery looks like 'TWRP recovery'.
Finally, i chose the new CF-Auto-Root's ChainFire, because i only wanted to become root.
But i haven't TWRP recovery
Hi all, when I reboot into twrp recovery it takes a long time before its booted in recovery. Any ideas why?
hill67 said:
Hi all, when I reboot into twrp recovery it takes a long time before its booted in recovery. Any ideas why?
Click to expand...
Click to collapse
Maybe it's decrypting the data partition upon starting recovery...
guyd said:
Maybe it's decrypting the data partition upon starting recovery...
Click to expand...
Click to collapse
So decrypting the n9 would help getting faster in recovery?
hill67 said:
So decrypting the n9 would help getting faster in recovery?
Click to expand...
Click to collapse
Perhaps, but only the dev can really answer that with certainty.
hill67 said:
So decrypting the n9 would help getting faster in recovery?
Click to expand...
Click to collapse
Decrypting the N9 would do R/W operations a little bit faster (N9's Procesor is enought fast for this, although maybe something isn't optimized completly). I don't think your problem is because N9 is Encrypted.
But with you guys it boots at a normal speed into recovery?
hill67 said:
But with you guys it boots at a normal speed into recovery?
Click to expand...
Click to collapse
No, it takes a fair amount of time. Longer than my n5. I think what you're seeing is normal for the n9
Sent from my Nexus 9 using XDA Free mobile app
recovery with dead android and red triangle
So I think I may have done things out of order. I first logged into android and enable developer options and checked enable oem unlock. Rebooted into fastboot and ran the oem unlock. Without rebooting, I ran the fastboot command to rewrite twrp ( i think was the mistake ). I rebooted and now I have no recovery. I then reflashed the 5.0.1 factory image. https://developers.google.com/android/nexus/images . Still no default recovery or twrp. Any ideas on what I need to do.
zoidberg_md said:
So I think I may have done things out of order. I first logged into android and enable developer options and checked enable oem unlock. Rebooted into fastboot and ran the oem unlock. Without rebooting, I ran the fastboot command to rewrite twrp ( i think was the mistake ). I rebooted and now I have no recovery. I then reflashed the 5.0.1 factory image. https://developers.google.com/android/nexus/images . Still no default recovery or twrp. Any ideas on what I need to do.
Click to expand...
Click to collapse
Flash twrp again in fastboot. Then flash supersu 2.37 in twrp.
Sent from my Nexus 9 using XDA Free mobile app
Any news on twrp for the LTE model?
Vendor partition can't be unmounted
TWRP 2.8.5.0 can't unmount the /vendor partition, and also can't restore it from a nandroid backup. Maybe it's due to the changed vendor location in Lollipop. Can you please update TWRP to deal with this properly? Plz!!!!
EDIT: The problem is fixed, the problem was my dead SD card, as soon as I took it out and boot into TWRP the recovery has been working well. Thank you all for your help anyways.
What's going on guys, today I'm in need of some aid. Couple days ago I was trying to swap ROMs from PsyRom to FlyMeOS and when I tried to access TWRP recovery, it would get stuck on the TeamWin logo. I softbricked my phone by restoring the stock recovery and kernel (lol) and flashed the latest Fastboot ROM. Now I'm fine with MIUI8, and I flashed TRWP again (with Fastboot flash) but everytime I try to access TRWP it gives me that stuck logo or a black screen. I don't know what to do because I already tried with a rooted Dev ROM and flashify and even the TWRP Manager but I can't get anywhere. Do you know what I can do?
I've seen several TWRP versions for RN2.
Did you try with the official one?
https://dl.twrp.me/hermes/
gnazio said:
I've seen several TWRP versions for RN2.
Did you try with the official one?
https://dl.twrp.me/hermes/
Click to expand...
Click to collapse
Yes I did, and with the 2.8.7, and the other 3.0.x
Always the same result. Did Xiaomi lock the Redmi Note 2 bootloader?
kiko9895 said:
Yes I did, and with the 2.8.7, and the other 3.0.x
Always the same result. Did Xiaomi lock the Redmi Note 2 bootloader?
Click to expand...
Click to collapse
AFAIK the bootloader is not locked.
Otherwise I think that you can't even install TWRP.
I any case, I would try with an older fastboot ROM and with the official TWRP.
Have you tried this one: http://forum.xda-developers.com/redmi-note-2/general/twrp2-8-7-0-light-materialized-theme-t3308492
DarthJabba9 said:
Have you tried this one: http://forum.xda-developers.com/redmi-note-2/general/twrp2-8-7-0-light-materialized-theme-t3308492
Click to expand...
Click to collapse
Yes, it's the last one I tried, I used the one on the first link, with MIUI8 compatibility.
gnazio said:
AFAIK the bootloader is not locked.
Otherwise I think that you can't even install TWRP.
I any case, I would try with an older fastboot ROM and with the official TWRP.
Click to expand...
Click to collapse
I'm sorry but do you know where I can find an older one?
kiko9895 said:
Yes, it's the last one I tried, I used the one on the first link, with MIUI8 compatibility.
Click to expand...
Click to collapse
I am using this one: https://drive.google.com/file/d/0BwdRTuyj12_yVlJoMzJoeUJKLVE/view
I have no problem with it (MIUI8). To be honest, I don't think any of them should cause the problem that you are having. Trying to solve the problem without identifying the cause will probably prove unfruitful. How did you install the first one that you had problems with? Did it ever work at all? If so, when did it start malfunctioning?
DarthJabba9 said:
I am using this one: https://drive.google.com/file/d/0BwdRTuyj12_yVlJoMzJoeUJKLVE/view
I have no problem with it (MIUI8). To be honest, I don't think any of them should cause the problem that you are having. Trying to solve the problem without identifying the cause will probably prove unfruitful. How did you install the first one that you had problems with? Did it ever work at all? If so, when did it start malfunctioning?
Click to expand...
Click to collapse
Yes it used to work, I already tried a lot of ROMs, I had the one compatible with Android 6.0 which I flashed with TWRP itself (It worked since I flashed CM13 with it).
I don't really know when it started malfunctioning because the last time I made a backup was at least one month ago when I swapped to PsyRom (it was functioning well). But two days ago when I tried to access it to change to FlyMe it wouldn't work. Anyways I'm flashing a MIUI7 fastboot ROM to see if it works.
I'm sorry if I can't explain myself very well but I'm doing the best I can lol. Thank you for your help too.
Perhaps something messed up your file system or partitions. If all attempts don't work, then you might want to use the SP Flash Tool to flash a compatible ROM and working TWRP.
DarthJabba9 said:
Perhaps something messed up your file system or partitions. If all attempts don't work, then you might want to use the SP Flash Tool to flash a compatible ROM and working TWRP.
Click to expand...
Click to collapse
I just flashed MIUI 7 with SP Flash Tool. Gonna try and flash TWRP through fastboot and with update.zip method, see if anything works.
kiko9895 said:
I'm sorry but do you know where I can find an older one?
Click to expand...
Click to collapse
I should have a MIUI7 on my mega account, it should be the last 7 stable, saved just in case something was wrong with 8.
I can send you the link if you are still searching.
OK, I just noticed that you have solved yet.
Good, I hope that this time everything will be fine.
gnazio said:
I should have a MIUI7 on my mega account, it should be the last 7 stable, saved just in case something was wrong with 8.
I can send you the link if you are still searching.
OK, I just noticed that you have solved yet.
Good, I hope that this time everything will be fine.
Click to expand...
Click to collapse
Thank you very much for your kindness, I'm still trying tho ahah using WinDroid Toolkit now.
gnazio said:
I should have a MIUI7 on my mega account, it should be the last 7 stable, saved just in case something was wrong with 8.
I can send you the link if you are still searching.
OK, I just noticed that you have solved yet.
Good, I hope that this time everything will be fine.
Click to expand...
Click to collapse
Hello, after one month the issue is still not fixed, the recovery still hangs. Perhaps you could send me that fastboot rom you talked about please? Thank you.
I'm going to send you the link.
In the meanwhile...reading the thread again...what is "update.zip method"?
Are you try to install TWRP from Mi recovery?
This is not going to work anymore.
You should better stay with the last ROM and flash TWRP from fastboot.
This is the recovery image: https://dl.twrp.me/hermes/twrp-3.0.2-0-hermes.img
This is the guide: https://twrp.me/devices/xiaomiredminote2.html
Just start your RN2 into fastboot (vol down+power on), run fastboot flash recovery twrp.img and finally keep pressed vol up and send fastboot reboot and wait with the key pressed until it enter TWRP.
BTW:
in the official forum there should be a thread with link to all officially released ROMs for RN2.
kiko9895 said:
Hello, after one month the issue is still not fixed, the recovery still hangs. Perhaps you could send me that fastboot rom you talked about please? Thank you.
Click to expand...
Click to collapse
Here you should find every MIUI Global ROM released for RN2:
http://en.miui.com/forum.php?mod=viewthread&tid=394496
I just realized that the one I have is China version, used just to clean the phone from reseller ROM.
gnazio said:
I'm going to send you the link.
In the meanwhile...reading the thread again...what is "update.zip method"?
Are you try to install TWRP from Mi recovery?
This is not going to work anymore.
You should better stay with the last ROM and flash TWRP from fastboot.
This is the recovery image: https://dl.twrp.me/hermes/twrp-3.0.2-0-hermes.img
This is the guide: https://twrp.me/devices/xiaomiredminote2.html
Just start your RN2 into fastboot (vol down+power on), run fastboot flash recovery twrp.img and finally keep pressed vol up and send fastboot reboot and wait with the key pressed until it enter TWRP.
BTW:
in the official forum there should be a thread with link to all officially released ROMs for RN2.
Click to expand...
Click to collapse
The problem is I already tried the fastboot method as well, and the problem is always the same, stuck TWRP logo. Even if it was a partition problem, flashing the fastboot ROM should fix it, but it didn't. I tried the SP Flash Tools method too, and the flashing methods are successful, they all Flash TWRP, but when I try to access it it's stuck. I don't know why this is happening, it used to work.
@kiko9895 Sounds like you have screwed your partitions. You will need to load a full ROM using SP Tools to correct it as this is the only way to set the partitions back at their correct memory locations. Fastboot and Recovery rewrite the partitions by name not memory location so any fault in that will never be fixed. If you have flashed an Android 6.0 based ROM or something intended for another model phone, this will definitely be the case. Anyone flashing custom ROMs should first gather the skills and tools to recover from disasters - luckily, MTK based phones are virtually unbrickable!
As far as the "official" TWRP goes, it is not official and not a good version. It is just someone who has used the TWRP build server to knock out a random version. How does that make it "official"?
jajk said:
@kiko9895 Sounds like you have screwed your partitions. You will need to load a full ROM using SP Tools to correct it as this is the only way to set the partitions back at their correct memory locations. Fastboot and Recovery rewrite the partitions by name not memory location so any fault in that will never be fixed. If you have flashed an Android 6.0 based ROM or something intended for another model phone, this will definitely be the case. Anyone flashing custom ROMs should first gather the skills and tools to recover from disasters - luckily, MTK based phones are virtually unbrickable!
As far as the "official" TWRP goes, it is not official and not a good version. It is just someone who has used the TWRP build server to knock out a random version. How does that make it "official"?
Click to expand...
Click to collapse
Ahah I have the skills and the tools, I've been flashing ROMs for more than two years. This never happened before. If you read what I said before on this thread, you'll see that I already flashed a new ROM through SP Flash Tools. And yes I flashed a 6.0 rom before so that must be the problem, but since I already flashed a fastboot rom through SP Flash Tools I can't see where the problem is. The partitions should be fixed by now but that isn't the case.
@kiko9895 Sorry if it sounded like I was coming down hard on you. You should only need to flash a matching preloader, uboot, logo plus TWRP recovery using SP Flash Tools with the correct scatter file to get back into booting to TWRP. Any other problems can be sorted from there.
I will attach a known good scatter file because I know there are several floating around that will reverse one or two partitions on you (such as the RN3 version)
I tried to update my oneplus x to a new version of resurrection remix (the android 7.1 version) by flashing through twrp. Long story short I tried to update the recovery twrp and also update my bootloader but it all went to **** and now my phone is bricked. If I try and boot the phone into either the OS or into recovery I get a boot loop where the oneplus logo appears, the phone vibrates then reboots. I can get into fastboot but when I try and flash either a rom or recovery it tells me I can't because my 'device is not unlocked'. I know my bootloader was unlocked previously but am thinking that by trying to install a new rom it has re-lock or something and I'm not sure if this means my phone is now a paper weight..
Any help would be greatly appreciated!
edit: This problem is fixed. However twrp won't flash/boot correctly now..
Follow this to the letter: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
I did basically the same thing you did and flashed a rom that was compatible with the old bootloader only and it "locked" my bootloader which made the recovery and ROM useless. It took me a few hours to get the device to actually be recognized correctly by the computer and program but it worked. You may also need to google since I remember needing to download basically the same program but from a different site.
Tanner1294 said:
Follow this to the letter: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
I did basically the same thing you did and flashed a rom that was compatible with the old bootloader only and it "locked" my bootloader which made the recovery and ROM useless. It took me a few hours to get the device to actually be recognized correctly by the computer and program but it worked. You may also need to google since I remember needing to download basically the same program but from a different site.
Click to expand...
Click to collapse
Thanks for the reply! I think I may have come across this but wasn't sure if I'd get myself into more trouble since my fastboot is working (it says it's for devices who have nothing). Rekcon it's still my best option?
Edit:
I tried it and worked perfectly. Thanks heaps!
lilfellabob said:
Thanks for the reply! I think I may have come across this but wasn't sure if I'd get myself into more trouble since my fastboot is working (it says it's for devices who have nothing). Rekcon it's still my best option?
Edit:
I tried it and worked perfectly. Thanks heaps!
Click to expand...
Click to collapse
You're welcome! Like I said I was in the same situation. It kept rebooting and when I got into fastboot my heart sank when it said "Device is locked"
So I now have recovery working as well as fastboot (unlocked this time). But I cannot for the life of me get twrp to work correctly. One version out of like 5 I've tried works but won't flash any roms; I read that could be from a bad version.. All others seem to flash from fastboot but when I try to boot I get the dtb not found error. I don't understand why I cant get it to work, this should be the easy part
lilfellabob said:
So I now have recovery working as well as fastboot (unlocked this time). But I cannot for the life of me get twrp to work correctly. One version out of like 5 I've tried works but won't flash any roms; I read that could be from a bad version.. All others seem to flash from fastboot but when I try to boot I get the dtb not found error. I don't understand why I cant get it to work, this should be the easy part
Click to expand...
Click to collapse
dtb not found error means its not compatiable with your bootloader. Did you try official twrp ? And you ever updated to new bootloader?
update your bootloader first, http://forum.xda-developers.com/onep...t3478917/page1
saurabh40629 said:
dtb not found error means its not compatiable with your bootloader. Did you try official twrp ? And you ever updated to new bootloader?
update your bootloader first, http://forum.xda-developers.com/onep...t3478917/page1
Click to expand...
Click to collapse
I'll give it a shot. I am using official twrp yeah - just seems weird because even the old one that used to work fine isn't working. That link doesn't work is this one ok?
http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Thanks for the help
lilfellabob said:
I'll give it a shot. I am using official twrp yeah - just seems weird because even the old one that used to work fine isn't working. That link doesn't work is this one ok?
http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Thanks for the help
Click to expand...
Click to collapse
Yeah... This is the link.
All working, everyones help is much appreciated! <3 thanks
Hello everyone, let me just go ahead and say that I'm a total noob in the android customization thing but I somehow manage to install Lineage OS on my L03 and at the time I thought it was done and I didn't messed anything up but somehow that backfire on me.
So right now my HAM 2 is on a boot-loop, it kept staying the Lineage OS loading screen and once it was done and show the device setup screen for like 3 seconds it goes black and load again.
I've tried everything to fix it, from reinstalling an older version of Lineage, install CM13, wipe all data cache and dalvik ( and yes I have install gapps everytime I install any custom ROM, and finally after looks around the web I thought It might be the power button that making it acts weird but when after cleans it with rubbing alcohol (70%) It's still happening.
Now I have 2 options, first is to downgrade the firmware ( I'm not sure if it safe and how to do it) and seconds is to downgrade or delete TWRP ( newest version on HAM2).
Please, if anyone knows how to fix this. Help me. I got this device from amazon and it'll be a hassle trying to claim warranty on it since I have unlock it's boot-loader and install a custom ROM.
Thanks in advance.
Im not trying to be an asshole but does no one know how I can fix this?.
Bl4ckAir said:
Im not trying to be an asshole but does no one know how I can fix this?.
Click to expand...
Click to collapse
Are you using MDMower's latest version of TWRP for the Mate 2 (3.1.N0-0) ?
divhandyman said:
Are you using MDMower's latest version of TWRP for the Mate 2 (3.1.N0-0) ?
Click to expand...
Click to collapse
I'm using the offical Teamwin TWRP 3.1.1.0 for mt2l03.
Bl4ckAir said:
I'm using the offical Teamwin TWRP 3.1.1.0 for mt2l03.
Click to expand...
Click to collapse
That one never works for me. Flash this version of TWRP and flash the latest version of Lineage OS 20170903.
https://www.androidfilehost.com/?a=show&w=files&flid=40887
divhandyman said:
That one never works for me. Flash this version of TWRP and flash the latest version of Lineage OS 20170903.
https://www.androidfilehost.com/?a=show&w=files&flid=40887
Click to expand...
Click to collapse
Could you elaborate on how to do that? Can I flash it in the old TWRP or ADB on desktop? Thanks.
Bl4ckAir said:
Could you elaborate on how to do that? Can I flash it in the old TWRP or ADB on desktop? Thanks.
Click to expand...
Click to collapse
Yes use ADB.
https://www.youtube.com/watch?v=OwY-K6-pmJU&feature=youtu.be
Bl4ckAir said:
Please, if anyone knows how to fix this.
Click to expand...
Click to collapse
Well, it seems that you missed all of the fun & games last week in the following thread:
https://forum.xda-developers.com/ascend-mate2/help/candy7-cm13-rom-restarting-loop-issue-t3661885
"divhandyman" gets right to the point by correctly recommending MDMower's repo @ AndroidFileHost. My discussions on the topic are slightly more wordy (we all have our faults, yes?), but MDMower's TWRP & LineageOS 09/03 (or newer) is all that you need because the boot loop fix is baked-in.
As a side note, my original instructions assumed a degree of basic knowledge and did not include guides to installing TWRP, making backups, moving files, using ADB/fastboot, etc... These tools and procedures are well documented, ad nauseam, elsewhere.
hola
have you managed to solve it?
I have the same problem!!!
please help
Douglas_27 said:
have you managed to solve it?
I have the same problem!!!
please help
Click to expand...
Click to collapse
Hi, Douglas I have managed to solved it. Please tell me the step you have taken and I'll maybe able to help you.
Does it work for L01 the latest TWRP
EndlessFall said:
Well, it seems that you missed all of the fun & games last week in the following thread:
https://forum.xda-developers.com/ascend-mate2/help/candy7-cm13-rom-restarting-loop-issue-t3661885
"divhandyman" gets right to the point by correctly recommending MDMower's repo @ AndroidFileHost. My discussions on the topic are slightly more wordy (we all have our faults, yes?), but MDMower's TWRP & LineageOS 09/03 (or newer) is all that you need because the boot loop fix is baked-in.
As a side note, my original instructions assumed a degree of basic knowledge and did not include guides to installing TWRP, making backups, moving files, using ADB/fastboot, etc... These tools and procedures are well documented, ad nauseam, elsewhere.
Click to expand...
Click to collapse
I tried the latest TWRP from MDMower but got stuck in a boot loop after I flashed it and went to turn off the phone to go into recovery mode.
i mistakingly delete a file on my huawei mt2-l02 and since then when i power on it will stuck on startup anyone with solution
i successfully flashed twrp on my a10 yesterday thanks to the help of some users on here. the plan was and still is to rpelace the os with a non google one. everything went ok. the phones was and still is oem unlocked, the phone reports as it did yesterday that there was a none samsung offical software on there so i assume twrp is still present for but for some reason i can't boot into it. booting with power and volume up goes into the old recovery men with no mention of twrp, and the volume up/down boot goies into the old download menu. do i need to reflash twrp or am i missing something?
Much gratitude to you.
you somehow managed to install the stock recovery image? just re flash TWRP but get it from official website
BrotherBoard said:
you somehow managed to install the stock recovery image? just re flash TWRP but get it from official website
Click to expand...
Click to collapse
apparently the phone isn't rooted. i need to root it.
fjb59 said:
apparently the phone isn't rooted. i need to root it.
Click to expand...
Click to collapse
good luck
BrotherBoard said:
good luck
Click to expand...
Click to collapse
i'll need to figure out how to do that. i think i found a link on here somewhere