Related
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
can you post 6.1plus vendor IMG and boot IMG here please
Or links
pawankonjarla said:
can you post 6.1plus vendor IMG and boot IMG here please
Or links
Click to expand...
Click to collapse
links updated now
BootLoader
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
nikash07 said:
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
Click to expand...
Click to collapse
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Raghu varma said:
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Click to expand...
Click to collapse
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
nikash07 said:
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
Click to expand...
Click to collapse
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Raghu varma said:
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Click to expand...
Click to collapse
I don't think Nokia is going to accept this and flash Oreo just like that.
nikash07 said:
I don't think Nokia is going to accept this and flash Oreo just like that.
Click to expand...
Click to collapse
Bro I updated to pie and went to care point and said some complaints about pie.they finally downgraded my phone . For example tell them Iam not comfort with pie so just flash DRG-229D File using ost. This file belongs to Oreo june security patch .
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Forum Rules said:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Raghu varma said:
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
My Teligram Group Link All Are invited And Feel Free to Ask your Questions MOD EDIT: LINKS REMOVED
My Teligram Channel For the Further Information
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
Click to expand...
Click to collapse
the Doctor said:
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
thanks for the information. I won't repeat this again
thank you very much
Can we unlock now?
And
How to flash stock rom
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
paul89rulez said:
thank you very much
Click to expand...
Click to collapse
Welcome
bbcastro said:
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
Click to expand...
Click to collapse
Well now twrp thread is up in nokia 6.1 kenel and recovery development section check it out
earlier treble gsi's had issues with Nokia phones Sim cards not being detected - has this been resolved, specifically relating to TA-1103?
So should I download From "A" only roms or "A/AB" roms?
Nokia X6 with Custom Oreo ROM - How to load stock Android Pie 6.1 plus image
Hi,
I bought a Nokia X6 in September 2018 (6GB/64GB) and would like to install the Stock Nokia 6.1 Plus Android 9 image.
I see my phone is rooted and it shows the message "Your device has loaded a different operating system." everytime I start it and I have to use Magisk to hide several banking applications.
The phone works great and I knew it was going to be relased in Europe eventually, but I am scared to brick it by loading the Android 9 Image.
I already tried attempting the update through OTA but the zip file is ignored. Nothing happens.
I am new to this forum so I don't know if my question has been asked by someone else.
Can you please help me?
Thank you!
Image size is bigger than target device..
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
---------- Post added at 04:03 PM ---------- Previous post was at 03:28 PM ----------
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
Does anyone have a guide on how to root a Xiaomi Redmi Note 10? I’m a novice Android user so any help will be appreciated. Thanks
You will need a Windows PC with Fastboot and Mi unlock tool installed. Here is what you could do without a TWRP to root through Magisk:
Apply for the Unlock process. This will take 167 hours and will factory reset your device. Backup your data before you do this. After the waiting period unlock your Bootloader.
Download your matching or newer Fastboot firmware from here. I assumed you have note 10 non 5G (mojito) based on that screenshot, if not, then that website has it for different varieties as well.
The Fastboot firmware is in .tgz format. Keep a copy for future screw ups just in case (will rescue you). Extract that archived folder and find boot.img inside.
Copy that .img to your phone, and download magisk manager 21.0 or newer and install it.
When opening the Manager on your phone for the first time, it'll prompt you to install itself, choose select and patch file and select the boot.img you copied to your phone earlier.
After it does that successfully, you will find a file called magisk_patched.img on the root of internal storage. Copy that patched .img back to your PC.
Reboot your phone to fastboot mode and connect to PC, flash that patched boot.img using:
Code:
fastboot flash boot magisk_patched.img
If flashed successfully, reboot your device and update/further install magisk.
Done, Your device is rooted !!!
P.S. Don't forget to mark this answer as solved by clicking the check mark beside it if it solved your question so anyone can see this in the future.
Slim K said:
You will need a Windows PC with Fastboot and Mi unlock tool installed. Here is what you could do without a TWRP to root through Magisk:
Apply for the Unlock process. This will take 167 hours and will factory reset your device. Backup your data before you do this. After the waiting period unlock your Bootloader.
Download your matching or newer Fastboot firmware from here. I assumed you have note 10 non 5G (mojito) based on that screenshot, if not, then that website has it for different varieties as well.
The Fastboot firmware is in .tgz format. Keep a copy for future screw ups just in case (will rescue you). Extract that archived folder and find boot.img inside.
Copy that .img to your phone, and download magisk manager 21.0 or newer and install it.
When opening the Manager on your phone for the first time, it'll prompt you to install itself, choose select and patch file and select the boot.img you copied to your phone earlier.
After it does that successfully, you will find a file called magisk_patched.img on the root of internal storage. Copy that patched .img back to your PC.
Reboot your phone to fastboot mode and connect to PC, flash that patched boot.img using:
Code:
fastboot flash boot magisk_patched.img
If flashed successfully, reboot your device and update/further install magisk.
Done, Your device is rooted !!!
P.S. Don't forget to mark this answer as solved by clicking the check mark beside it if it solved your question so anyone can see this in the future.
Click to expand...
Click to collapse
Thanks mate. Will wait for the phone to be unlocked then will try these steps.
hello, I followed the whole procedure and the phone only reboots in bootloop or after several reboots it brings me back to Fastboot
Slim K said:
You will need a Windows PC with Fastboot and Mi unlock tool installed. Here is what you could do without a TWRP to root through Magisk:
Apply for the Unlock process. This will take 167 hours and will factory reset your device. Backup your data before you do this. After the waiting period unlock your Bootloader.
Download your matching or newer Fastboot firmware from here. I assumed you have note 10 non 5G (mojito) based on that screenshot, if not, then that website has it for different varieties as well.
The Fastboot firmware is in .tgz format. Keep a copy for future screw ups just in case (will rescue you). Extract that archived folder and find boot.img inside.
Copy that .img to your phone, and download magisk manager 21.0 or newer and install it.
When opening the Manager on your phone for the first time, it'll prompt you to install itself, choose select and patch file and select the boot.img you copied to your phone earlier.
After it does that successfully, you will find a file called magisk_patched.img on the root of internal storage. Copy that patched .img back to your PC.
Reboot your phone to fastboot mode and connect to PC, flash that patched boot.img using:
Code:
fastboot flash boot magisk_patched.img
If flashed successfully, reboot your device and update/further install magisk.
Done, Your device is rooted !!!
P.S. Don't forget to mark this answer as solved by clicking the check mark beside it if it solved your question so anyone can see this in the future.
Click to expand...
Click to collapse
what about vbmeta?
0purple said:
what about vbmeta?
Click to expand...
Click to collapse
I do not understand the question
0purple said:
what about vbmeta?
Click to expand...
Click to collapse
Not really necessary for Xiaomi devices (apart from the Mi series) as far as I know, but maybe they changed that with the upgrade to android 11?
titifayls said:
I do not understand the question
Click to expand...
Click to collapse
He meant disabling AVB 2.0 by flashing the vbmeta.img from the downloaded fastboot firmware by using:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
I personally have encountered many problems using Magisk 22.0 stable version, if you're using that, then either update to the canary version (you can switch the update channel in the manager settings) or use the older version 21.4.
If all of the above fails, just reflash the stock boot.img and your phone will boot normally.
Slim K said:
Not really necessary for Xiaomi devices (apart from the Mi series) as far as I know, but maybe they changed that with the upgrade to android 11?
He meant disabling AVB 2.0 by flashing the vbmeta.img from the downloaded fastboot firmware by using:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
I personally have encountered many problems using Magisk 22.0 stable version, if you're using that, then either update to the canary version (you can switch the update channel in the manager settings) or use the older version 21.4.
If all of the above fails, just reflash the stock boot.img and your phone will boot normally.
Click to expand...
Click to collapse
precisely I did not take magisk v22 but v21, moreover I have exactly the same version as the first poster is 12.0.1 RKGEUXM.
To root I took the boot.img from version 12.0.2, was it an error?
I tried to reflash the original boot.img file from v12.0.2 but still in bootloop
I can not find anywhere where to take my original version yet up to date v12.0.1
@titifayls The original poster had version
V12.0.1.0.RKGMIXM (Global) while you claim to have downloaded
V12.0.2.0.RKGEUXM (European) which are not interchangeable. If you want to use either global or eu. Then you would need to flash the full firmware, you can't flash the boot.img from EU to ROM of global. It won't boot.
If you don't really remember which version came with your device, then reply to me again and I can give you further instructions. Tell me which OS are you using to access fastboot and if you want to preserve your data.
Slim K said:
@titifayls The original poster had version
V12.0.1.0.RKGMIXM (Global) while you claim to have downloaded
V12.0.2.0.RKGEUXM (European) which are not interchangeable. If you want to use either global or eu. Then you would need to flash the full firmware, you can't flash the boot.img from EU to ROM of global. It won't boot.
If you don't really remember which version came with your device, then reply to me again and I can give you further instructions. Tell me which OS are you using to access fastboot and if you want to preserve your data.
Click to expand...
Click to collapse
ha , sorry indeed I may have made a mistake, now I don't remember my exact version, it seemed to me that it was EU but in 12.0.1
I use ABD in fastboot and yes I would like to keep all my data that I did not save before wanting to root: /
I bought the phone on aliexpress, I am French, can I look on the box if I have any info on the version?
titifayls said:
ha , sorry indeed I may have made a mistake, now I don't remember my exact version, it seemed to me that it was EU but in 12.0.1
I use ABD in fastboot and yes I would like to keep all my data that I did not save before wanting to root: /
I bought the phone on aliexpress, I am French, can I look on the box if I have any info on the version?
Click to expand...
Click to collapse
I asked if you're using windows or linux to connect to your phone. About losing data, maybe a clean flash could be required, but trying first won't hurt.
Here is how you do it: (you can use the downloaded fastboot firmware, because your device is unlocked, so region differences won't matter that much when flashing full firmware):
Inside that .tgz archive (that you unarchived) you'll find a script called flash_all_except_data_storage.bat for windows or flash_all_except_data_storage.sh for linux. (Do not use the flash_all_lock.bat/.sh script or risk a hard brick, so read carefully this time!!!!)
Connect your device in fastboot mode and open a CMD/Terminal where those scripts and the rest of the firmware files are. Use fastboot devices to make sure device is recognized.
If it is, then type in fastboot followed by dragging and dropping the flash_all_except _data_storage.bat to your CMD/terminal and press Enter. The process should begin automatically. If you get an error, make sure to have typed a space after the fastboot command and before the dropped script.
If it takes a long time during flash of super, don't panic!! Super.img is a very big file
Done!
If it still bootloops after that, then use the flash_all.bat script (will factory reset your phone and delete data)
It doesn't matter, it gives me the list of commands but doesn't launch anything
Wouldn't it be better to put fastboot flash?
don't bother, I'll take miflash, it'll be easier
I delivered an eea_global_images_V12.0.2.0.RKGEUXM rom with miflash by putting flash_all_except_data_storage.
I recovered everything at startup, my applications everything, so I redid the manipulation for the root and now everything works, perfect
thank you
I did the above process successfully.
Also if new update comes out, the process must be done again (not including the unlocking part of course).
The ROMs are posted here
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Slim K said:
Not really necessary for Xiaomi devices (apart from the Mi series) as far as I know, but maybe they changed that with the upgrade to android 11?
He meant disabling AVB 2.0 by flashing the vbmeta.img from the downloaded fastboot firmware by using:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
I personally have encountered many problems using Magisk 22.0 stable version, if you're using that, then either update to the canary version (you can switch the update channel in the manager settings) or use the older version 21.4.
If all of the above fails, just reflash the stock boot.img and your phone will boot normally.
Click to expand...
Click to collapse
so if i use latest magisk v22.1 , do i have to disable something like vbmeta.img or not ? or it is onli Mi Series that need to disable vbmeta.img ?
how to see how many hours left to unlock the phone ? i kinda forgot about it, it is my 1st MIUI device beside Xiaomi Mi A1
pihpih95 said:
so if i use latest magisk v22.1 , do i have to disable something like vbmeta.img or not ? or it is onli Mi Series that need to disable vbmeta.img ?
Click to expand...
Click to collapse
Only MI series need that. You should not have to do that. Also yes, I meant to say that 22.0 stable magisk can make the patched boot.img unbootable. Using the 22.1 canary is the way to go.
pihpih95 said:
how to see how many hours left to unlock the phone ? i kinda forgot about it, it is my 1st MIUI device beside Xiaomi Mi A1
Click to expand...
Click to collapse
You would need to connect your phone in fastboot mode and use MI unlock tool again. It'll tell you how many hours left. Usually, you just need to wait exactly one week or 168 hours.
Slim K said:
Only MI series need that. You should not have to do that. Also yes, I meant to say that 22.0 stable magisk can make the patched boot.img unbootable. Using the 22.1 canary is the way to go.
You would need to connect your phone in fastboot mode and use MI unlock tool again. It'll tell you how many hours left. Usually, you just need to wait exactly one week or 168 hours.
Click to expand...
Click to collapse
about mi unlock tool , what version that show how many hours left ? i use latest version and it show nothing on the tool , if i remember correctly the oldest version show the time remaining to unlock , sorry if i mistaken something here >.<
pihpih95 said:
about mi unlock tool , what version that show how many hours left ? i use latest version and it show nothing on the tool , if i remember correctly the oldest version show the time remaining to unlock , sorry if i mistaken something here >.<
Click to expand...
Click to collapse
I used the latest as well. Most of the time, it errors out and I can't see the time left, but sometimes it works. Don't forget, you're giving them your imei for the freedom of your phone. Those imei's must be stored on Chinese servers and the tool must query those servers to get any info, depending on your country it may not work at all.
My experience with using an older tool has been very bad, the time was extended to 2 weeks instead of one on an another Xiaomi device. Avoid doing that and wait the requested time first.
After following the instruction my phone keeps rebooting.
I tried the flash_all.bat without success. What could I do?
Received the tablet in the mail, and now looking to root via Magisk (and ideally a custom recovery like TWRP).
I found this video describing a way to download the stock ROM from Teclast:
Has anyone achieved root on this device? Can anyone confirm Treble ROM compatability for GSI A/B?
On the russian forum 4pda somebody posted the patched boot.img and vbmeta.img files required for rooting.
If anyone is registered on the forum he might try to grab the files, for me it gives 404 error when trying to download, though im not registered..
Teclast T40 Plus - Обсуждение - 4PDA
Teclast T40 Plus - Обсуждение, Планшет, 10,4
4pda.to
NightLord said:
On the russian forum 4pda somebody posted the patched boot.img and vbmeta.img files required for rooting.
If anyone is registered on the forum he might try to grab the files, for me it gives 404 error when trying to download, though im not registered..
Teclast T40 Plus - Обсуждение - 4PDA
Teclast T40 Plus - Обсуждение, Планшет, 10,4
4pda.to
Click to expand...
Click to collapse
Good find, but the link no longer works. It gives me a 404: https://4pda.to/forum/dl/post/24458874/T40_Plus_root.7z
My guess is it would work if we were logged in, its just that i cant create an account since i cannot get past rhe russian captcha
Yeah, I also can't register without knowing the Russian keyboard layout and how to identify the characters. Perhaps someone with this knowledge can register and attach the required images to root here?
Slightly off topic while someone manages to grab the files from 4pda
Do you actually get 50000+ gpu score in antutu with the t40? I have the maxpad i11 which is in theory the same hardware, and I only get 42000. I even flashed the t40 firmware on the device, but gpu score didnt budge.
To be on topic: if you want root, you may also flash phhuson's treble GSI rom-s. I tried his version of android 12, and it works, and has root.
NightLord said:
Slightly off topic while someone manages to grab the files from 4pda
Do you actually get 50000+ gpu score in antutu with the t40? I have the maxpad i11 which is in theory the same hardware, and I only get 42000. I even flashed the t40 firmware on the device, but gpu score didnt budge.
To be on topic: if you want root, you may also flash phhuson's treble GSI rom-s. I tried his version of android 12, and it works, and has root.
Click to expand...
Click to collapse
These ROMs? https://github.com/phhusson/treble_experimentations/releases
ForgottenSolstace said:
These ROMs? https://github.com/phhusson/treble_experimentations/releases
Click to expand...
Click to collapse
Yes.
You can either install them via DSU as dual-boot OS beside your stock rom, or just flash system partition (inside super) via fastbootd (you are going to have to delete product partition to have enough space inside super for the system image) and use them as primary OS.
Gotcha:
Just ordered a T40 Plus, did you manage to get root?
Flashing the boot and vbmeta partitions with the images attached to my previous post will grant you root on the stock t40 plus firmware.
I myself moved on to using android 12 gsi images.
NightLord said:
Flashing the boot and vbmeta partitions with the images attached to my previous post will grant you root on the stock t40 plus firmware.
I myself moved on to using android 12 gsi images.
Click to expand...
Click to collapse
Hi NightLord, can you explain easily the root steps for this device? do we need the software that we see in the video at the beginning or is ADB enough?
Marynboy78 said:
Hi NightLord, can you explain easily the root steps for this device? do we need the software that we see in the video at the beginning or is ADB enough?
Click to expand...
Click to collapse
Hey,
You need to use the spreadtrum research download tool (RDT), not the one seen in tthe video in the first post.
See this guide on how to use the RDT.
The basic concept is that you need to download the official firmware from the teclast homepage, load it into RDT, uncheck all partitions (save for those that are compulsory and cannot be unchecked), select only boot and vbmeta partitions, and as images to be flashed you need to browse the ones found in the archive I posted, instead of those found in the original firmware package.
Begin flashing, your device will perform a hard reset, and then you should boot into rooted firmware.
Theoretically you should be able to flash both partitions (boot and vbmeta) via fastboot too, but when I tried, i got an error message saying boot.img was too large or something. Flashing via RDT went without problem. The only caveat is that flashing via RDT will always hard reset your device.
NightLord said:
Flashing the boot and vbmeta partitions with the images attached to my previous post will grant you root on the stock t40 plus firmware.
I myself moved on to using android 12 gsi images.
Click to expand...
Click to collapse
How to install android 12 gsi on this device?
marinzrncic said:
How to install android 12 gsi on this device?
Click to expand...
Click to collapse
First you need to unlock the bootloader. You need to be patient when you are flashing the unlock, my device took some 10 mins to complete, but in the end it succeeded (on the 2nd try, mind you.)
Here is a guide for unlocking in windows, though it is in russian (Im attaching the required modified fastboot in case you cannot download it from 4pda).
When you're done unlocking the bootloader, you've already done the hard part.
Next, download your preferred GSI image from Google, from phhusson's, or whatever else you find (Pixel Experience for eg.). Mind you, that the image from Google contains the Android 12L version.
Next you will flash your active system partition with the GSI image. To do that, initate ADB connection to your tablet, then enter fastbootd, by issuing the command:
fastboot reboot fastboot
you can check your active system slot by:
fastboot getvar all (but it will be slot "a" unless you have received an OTA update previously)
you need to free up some space by deleting the logical partition product otherwise you wont be able to flash your gsi:
fastboot delete-logical-partition product_a
(in case your active slot is "a")
then you can move forward to actually flashing your GSI:
fastboot flash system_a whateverisyourimagefilename.img
Lastly, you will need to wipe userdata, which can be done on the tablet by switching to recovery from fastbootd, and then selecting wipe userdata, or maybe the fastboot -w command does the same.
Reboot, and enjoy your GSI.
I'm using the Google 12L GSI, and it is perfectly stable for daily usage. For bluetooth audio to work, you will have to disable bluetooth a2dp hardware offload in developer options.
NightLord said:
First you need to unlock the bootloader. You need to be patient when you are flashing the unlock, my device took some 10 mins to complete, but in the end it succeeded (on the 2nd try, mind you.)
Here is a guide for unlocking in windows, though it is in russian (Im attaching the required modified fastboot in case you cannot download it from 4pda).
When you're done unlocking the bootloader, you've already done the hard part.
Next, download your preferred GSI image from Google, from phhusson's, or whatever else you find (Pixel Experience for eg.). Mind you, that the image from Google contains the Android 12L version.
Next you will flash your active system partition with the GSI image. To do that, initate ADB connection to your tablet, then enter fastbootd, by issuing the command:
fastboot reboot fastboot
you can check your active system slot by:
fastboot getvar all (but it will be slot "a" unless you have received an OTA update previously)
you need to free up some space by deleting the logical partition product otherwise you wont be able to flash your gsi:
fastboot delete-logical-partition product_a
(in case your active slot is "a")
then you can move forward to actually flashing your GSI:
fastboot flash system_a whateverisyourimagefilename.img
Lastly, you will need to wipe userdata, which can be done on the tablet by switching to recovery from fastbootd, and then selecting wipe userdata, or maybe the fastboot -w command does the same.
Reboot, and enjoy your GSI.
I'm using the Google 12L GSI, and it is perfectly stable for daily usage. For bluetooth audio to work, you will have to disable bluetooth a2dp hardware offload in developer options.
Click to expand...
Click to collapse
thank you very much
NightLord said:
Hey,
You need to use the spreadtrum research download tool (RDT), not the one seen in tthe video in the first post.
See this guide on how to use the RDT.
The basic concept is that you need to download the official firmware from the teclast homepage, load it into RDT, uncheck all partitions (save for those that are compulsory and cannot be unchecked), select only boot and vbmeta partitions, and as images to be flashed you need to browse the ones found in the archive I posted, instead of those found in the original firmware package.
Begin flashing, your device will perform a hard reset, and then you should boot into rooted firmware.
Click to expand...
Click to collapse
Did we need unlock bootloader first or we can flash root without unlock bootloader?
Thx
ardianz said:
Did we need unlock bootloader first or we can flash root without unlock bootloader?
Thx
Click to expand...
Click to collapse
I have no idea because I havent tried yet. But I would guess it might be possible that you can flash the patched boot.img along with vbmeta.img with RDT, and it might work, if they do pass Android Verified Boot check.
NightLord said:
Gotcha:
Click to expand...
Click to collapse
will these files work on android 10 or android 11? I have a unisoc T618 and unisoc T310. I was hoping to flash both tablets to get root access.
and also do you have a twrp for T40_plus or any unisoc generic twrp?
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?
there is no forums for redmi 10
San2005 said:
there is no forums for redmi 10
Click to expand...
Click to collapse
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
joke19 said:
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
Click to expand...
Click to collapse
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
San2005 said:
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
Click to expand...
Click to collapse
How did you get miui 13 mine is stuck on 12.5 and i have some bugs that might get solved with a update.
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot [name of the file twrp].img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
install magisk.zip if you want
Reboot system
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english :/
alan7283 said:
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot twrp13.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
Reboot system
If you prefer orange fox recovery, go in the twrp, flash boot-orangefox.img in the recovery and reboot !
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english
Click to expand...
Click to collapse
You got MIUI 13 ?
Yes
alan7283 said:
Yes
Click to expand...
Click to collapse
Howw ??? OTA ?
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
alan7283 said:
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
Click to expand...
Click to collapse
I would love too but won't I lose warranty?
dda7lite said:
I would love too but won't I lose warranty?
Click to expand...
Click to collapse
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
alan7283 said:
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
Click to expand...
Click to collapse
Your sure? because I can't lose my 3 year warranty
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
alan7283 said:
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
Click to expand...
Click to collapse
Yeah and I will probably not flash it today I might sent it to warranty first because it's giving me a really weird problem
What problem?
alan7283 said:
What problem?
Click to expand...
Click to collapse
When I plug in charger phone immediately becomes unresponsive, touch stops and won't turn on (only with fingerprint)
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
alan7283 said:
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
Click to expand...
Click to collapse
You can write the tutorial if you want and I'll save it
dda7lite said:
You can write the tutorial if you want and I'll save it
Click to expand...
Click to collapse
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
alan7283 said:
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
Click to expand...
Click to collapse
I have 2 questions does it work on Redmi 10 2022 and don't it get Bricked if I lock bootloader with other region ?