i am really tired from a problem with my hd2 i can‘t connect my hd2 with pc (( usb cable )) i did every thing and i couldnt recognize it i am really desperate can anybody help ?
Might
help if you mention what Windows/system you are running on your pc
the operation system is windows 7
Do
you have the Windows Mobile Device Center installed?
Have you tried a Disk Drive connection, under connections USB to PC?
I do know for a fact some people simply solved the problem just by using another USB port...
Might be worthwhile checking your firewall too, I believe some can block the active sync connection
registeredxdadevi said:
you have the Windows Mobile Device Center installed?
Have you tried a Disk Drive connection, under connections USB to PC?
I do know for a fact some people simply solved the problem just by using another USB port...
Might be worthwhile checking your firewall too, I believe some can block the active sync connection
Click to expand...
Click to collapse
thank you for your post i did everything you wrote the problem still my hd2 doesnt recognize to my pc i am planning to sell my phone because og this
Havent used WP7 yet, but in WM6.x there is something in Settings for USB connection - this gives you the ability to check a box that says (something like) Fast Outlook connection. If you uncheck this you will probably find that your HTC connects beautifully. So, again, trawl through your setup/settings and look for something that talks to USB connection, or PC Synch.
Hope this helps.
Uninstall all versions of Windows Mobile Device Centre then reboot, just install the latest update from of WMDC from Microsoft and plug your HD2 in.
It worked for me and I'd tried everything else.
G
I'm having the same problem also, but I am using Windows Vista. I tried just about everything the forum mentions its pretty frustrating. I've tried uninstalling and installing WMDC and tried different USB ports, also tried selecting a few of the different settings on the phone in the USB to PC. Does anyone know what possibly I am missing or not doing correctly?
evilged said:
Uninstall all versions of Windows Mobile Device Centre then reboot, just install the latest update from of WMDC from Microsoft and plug your HD2 in.
It worked for me and I'd tried everything else.
G
Click to expand...
Click to collapse
I number of my friends had the same problem concerning the connection and when they did the above it fixed the problem. I suggest everyone give it a go.
Still having problems with this... I've uninstalled rebooted and installed and reboot WMDC and also messed with all the settings on USB to PC and tried every single USB port on my computer. I am running Windows Vista 64 bit version and still not having any luck getting this phone to connect via USB. Anyone have any ideas?
Related
It just sits there saying 'Connecting'
I tried the ip address change in Remote-NDIS Host
tried uinstall/reinstall Twice
Tried repair
tried outlook default mail
Tried turning firewalls off
im running XP pro with SP2 , activesync 4 (build 4343)
and wm2005 OS 5.1.1700 (build 14326.0.0.0)
Please help. Im sick of searching...
I upgraded my O2 XDA II tonight and everything went OK except like you my PC just sits there now "Connecting"
I know this may sound kind of strange: I tried disabling my software firewall on my PC (ZoneAlarm) as well as disabling Adware- Adwatch, but the PDA and the PC still wouldn't sync. AS 4 just displayed "Connecting".
I decided to also try disabling my antivirus software (Norton AV) in addition to the other disabled software and "suddenly" I can sync again!. Go figure.
Still cant sync...
Im transfering files via bluetooth until i fix this.
Still searching!
Really weird: I turn on the Norton AV auto-protect = no connection between AS & XDA. Turn off the Norton AV auto-protect = sync. I just spent the last hour bouncing back and forth to insure that Norton was the blockage.
The only thing I can suggest is download ActiveSync 4.0 from Microsoft's website, uninstall current version, reboot PC, install new version.
Mount PDA on cradle...
System will not recognize it again.
Unplug USB cable and plug it again BUT IN ANOTHER USB PORT on PC.
System will detect and install properly.
I hope this works for you as it did for me.
Regards,
Rayan
I have an Advantage x7500. I've installed the WM6 ROM here. My problem is I can't connect to my Advantage via Windows Mobile Device Center on my Vista box or ActiveSync on my XP box. The computer makes the expected sound when the USB connection is made, and in ActiveSync I can explore the device, but that's it. In WMDC, the error message for RapiMgr is "Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code)." I've done a lot of searching before I posted this and found a lot of posts (so at least I'm not alone). I've disabled firewalls, AV, anti-spyware, but no change. I've also uninstalled and reinstalled WMDC and ActiveSync. I do notice in Device Manager no Windows Mobile Remote Adapter under the Network Adapters node. Under the Mobile Devices node is HTC USB Sync. Any suggestions would be appreciated as I've been beating my head on wall on this. Thanks.
http://forum.xda-developers.com/showthread.php?t=315645
cayotte said:
http://forum.xda-developers.com/showthread.php?t=315645
Click to expand...
Click to collapse
Thanks, but been there, done that. (I didn't want to waste everyone's time so I did use the search button first)
As I mentioned in my prior message, in Device Manager there is no Windows Mobile Remote Adapter under the Network Adapters node. Do those of you using WM6 have such an entry for that adapter?
.
I have the same problem, but in Vista.
Sync has been working fine, but now suddenly it wont connect.
.
ps: sync on my SPV C500 works perfect. It's only my X7500 that won't connect.
..
lo and behold.....xman06's solution in the other tread worked for me.
"Try to go on setting connection usbtopc and disable advanced network functionality and ok"
perfect
teddyen66 said:
lo and behold.....xman06's solution in the other tread worked for me. "Try to go on setting connection usbtopc and disable advanced network functionality and ok" perfect
Click to expand...
Click to collapse
Thanks, but been there and done that too. (The downside of searching first is that all the usual solutions have been tried)
Tell me, under Device Manager do you have Windows Mobile Remote Adapter under the Network Adapters node? And under the Mobile Devices node do you have HTC USB Sync? I'm missing the former; that may be the issue but I'm not sure not knowing if others have it or not.
I bit the bullet and did a hard reset (too bad that doesn't work on spouses ) and ActiveSync started working again.
Kaiser / TyTN II WMDC Activesync no connection
I have the same issue described above. And no, the solutions given don't work. Not even a hard reset.
I am not sure what the issue is. Any ideas?
Similar problem solved
I had the same problem and went through many steps like those posted in this forum. I'm going to show my steps to solve this problem without hard reset your phone.
1) When the phone is connected, at the phone ActiveSync setting delete the PC profile.
2) Unplug the phone from the PC.
3) Uninstall and then reinstall the ActiveSync or Windows Mobile Center.
4) At phone system setting -> About -> make sure there is a name ID. Without this the PC cannot identify the phone and thus cannot sync.
5) Set the USBtoPC with 'advance network..." enabled.
6) To the extreme, before step 3, go to PC windows\inf and remove infcache.1 (need to add in an administrators account and set the privilage to full control). That may remove old corrupted drivers.
This page was coming up on the top list of google so i'll post my solution here.
I also spent hours trying to find the problem
uninstalled/reinstalled WMDC/Downloaded the latest version etc/Hard reset TYTN II/followed endless google searches,followed the instructions here etc etc.
Similiar to the OP i had windows making the "normal ding dong sounds but no connection happening.
In the finish what fixed my problem was with the device plugged in go to Device Manager on the PC and in "Network Adapters" select "Microsoft Windows Mobile Remote Adapter" and right click "Update Driver Software"
That got me back connected.....Hope it helps someone else out
Did it worked? I can't install WMDC without having my Pocket PC conected and when I have it it doesn't install anyway...
hey guys, if you have firewall installed disable it until the connection is made with your computer and phone, then re-enable your firewall.
this seems to be the problem solution for me all the time. Hope it helps.
I have an issue with my VZW Touch Pro not being recognized by MDC and have torn out what little hair I had left trying to solve it. I know there are numerous threads of this type and I've read every one I can find but my situation is a bit different (aren't they all ).
Basically, when I hook up the TP via USB to my Vista machine MDC doesn't come up. If I launch it manually it comes up, sometimes flashes the "Connecting" message very briefly then goes to "Not Connected" and sits. OK. So why am I baffled and what have I done? Well....
1. If I set the TP to connect as a "Disk Drive" (as opposed to ActiveSync) Vista recognizes it and asks me if I want to explore files and folders, I can see the storage card;
2. In PC to USB I've tried both WITH Advanced Device Configuration enabled and not enabled;
3. I've installed Activesync on another (XP) machine to see if the TP will connect to it and get the same behavior;
4. I've removed the Remote Adapter and USB Synch in Device manager (following the standard MS troubleshooting guide) so that Vista installs the USB driver, just to make sure;
5. I INITIALLY installed MDC on this machine when I was trying an HTC Fuze. At that time MDC worked fine, recognizing the Fuze and asking me what I want to sync, etc.;
6. Since that time I've uninstalled and reinstalled MDC (several times) JUST IN CASE, although it shows NO existing partnerships;
7. I've turned off and actually removed the firewall even though, as I said, MDC worked fine before.
8. On the TP I've set ActiveSync (I'm hooking to an Exchange Server) to sync "Manually" and Windows Live to sync "Manually", JUST IN CASE that was the problem.
The only reason I really even NEED MDC is that I want to use eWallet and need to sync between the PC and Touch Pro.
I've used the TP as a modem for my laptop via Modem Link successfully, but while ML is set to USB the service is Stopped. Would THAT have any affect on this: one thing I've noticed is that when I plug the TP in the PC (sometimes) displays a message to the effect that it's trying to connect to a wireless LAN?????
Sorry for the length of this message but I figure the more info the better and this really has me stumped.
Thanks for any ideas.
if this helps yo in any way here it is.
i tryed to hook up my TP via WMDC on a Toshiba Tecra Laptop, with USB or Bluetooth and in the best case i managed to send files via bluetooth ... and the WMDC does not recognize the device, it installs some drivers for the cable (i think) and does not find any for the device, so ... it does the same thing as for you, tryes to connect for a second and after that it goes on a endless brake ... never connecting
on the other hand, i had no problems with a dell inspiron, with wista, it installed the drivers instantly and got connected immediately. the same with a Win XP dektop PC using activesync ...
i`m beggining to believe that the software is sort of defective on the toshiba. now i just send file from it and us the dell to sync my TP. i gave up on connecting the toshiba.
Pretty sure you have already tried this...but different USB cord maybe?
uncheck the box for advanced network functionality in the USB - PC connection settings
MogulUser13 said:
uncheck the box for advanced network functionality in the USB - PC connection settings
Click to expand...
Click to collapse
Thank you!! Solved my problem.
This seems to happen a lot... I just replied to another post in regards to this (though they replaced their Touch Pro). Instead of disabled advanced network functionality (which does let you sync), you should try this to repair the error as it has worked on a friend's Pro, as well as mine (I just had to do it 40 minutes ago). And make sure you re-enable advanced network functionality BEFORE doing this:
1 - Hook up phone to computer
2 - On phone, start ICS (Internet Sharing in Start -> Programs)
3 - Select PC Connection "USB" and Network Connection of any type (if Sprint stock ROM, I recommend using "Sprint")
4 - Hit the "Connect" soft-key (bottom left)
If you've never used Internet Sharing on the phone, your computer should install some drivers... Once that is completed, click the Disconnect left soft-key on the phone. Now disconnect the cable from the computer.
Close out ICS or soft-reset the phone.
Once the phone is back up, plug it in - it should work.
I don't know what is getting reset in the phone, but unless I connect with ICS, then ActiveSync will not connect whether I soft-reset or not.
I have been trying to get Nokia Care Suite to detect my device when it is plugged in via USB. I have installed and reinstalled NCS along with several drivers to no avail. I have updated the MS Framework to the most recent one along with using different USB cords and trying all the USB ports.
I am using a Windows & 64x laptop if that helps. I have looked around the internet for any solutions, but have found none so far. I know that NCS is supposed to detect your device once it is connected from what many other users say, but mine just does not do that.
Is there any possible solution to this?
Any help would be appreciated.
Might be some driver problem. better try another laptop or computer. no problem at all with my 32bit windows7.
shindou26 said:
I have been trying to get Nokia Care Suite to detect my device when it is plugged in via USB. I have installed and reinstalled NCS along with several drivers to no avail. I have updated the MS Framework to the most recent one along with using different USB cords and trying all the USB ports.
I am using a Windows & 64x laptop if that helps. I have looked around the internet for any solutions, but have found none so far. I know that NCS is supposed to detect your device once it is connected from what many other users say, but mine just does not do that.
Is there any possible solution to this?
Any help would be appreciated.
Click to expand...
Click to collapse
I have tried to connect with the device through USB with fastboot, adb, and just through Windows. It does not show up in the Device Manager at all.
Is this a hardware issue with the device? Seems odd as it was working fine and now it isn't and it has only been sitting on my desk as this isn't my main phone.
By the way I have tried this on 2 different Windows 8.1 computers and one Windows 7 PC.
Try removing all drivers for the phone and reinstalling them and see if it works. Also are there any other phone drivers installed for a different device you may have recently installed? They may be conflicting.
Sent from my Nexus 7 using XDA Premium 4 mobile app
It should still show up in Device Manager regardless of drivers though. Just tested on a computer that has never had a single phone plugged into it and Device Manager still does not detect and devices.
Windows 8.1 has driver issues for the DNA. Though it should have worked fine in Windows 7. But I believe for a device to show up the drivers need to be installed.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
justinds89 said:
I have tried to connect with the device through USB with fastboot, adb, and just through Windows. It does not show up in the Device Manager at all.
Is this a hardware issue with the device? Seems odd as it was working fine and now it isn't and it has only been sitting on my desk as this isn't my main phone.
By the way I have tried this on 2 different Windows 8.1 computers and one Windows 7 PC.
Click to expand...
Click to collapse
try a different cable
The device should still show up without drivers as an unknown device. You can't really mess with the drivers for the device until it shows up. Also on a Windows 7 computer that has never been used before the computer should automatically pickup the device so you can transfer files to/from through Windows Explorer.
I have tried a different cable.
I am starting to think it's a hardware issue with the device itself.
what happens when you connect an OTG cable and a flash drive? Does the activity light on the drive activate?
I have not tried that and I do not believe I have an micro OTG cable. I will have to check when I am back at my place later.
Try installing HTC sync and update it and see if that installs ur correct drivers
Sent from my HTC6435LVW using xda app-developers app
Appreciate the replies. It should still detect a device plugged in without drivers/HTC Sync, but I have tried installing HTC Sync and all that anyhow. The PC's can detect other Android devices just fine(HTC One M8 & EVO 4G).
justinds89 said:
Appreciate the replies. It should still detect a device plugged in without drivers/HTC Sync, but I have tried installing HTC Sync and all that anyhow. The PC's can detect other Android devices just fine(HTC One M8 & EVO 4G).
Click to expand...
Click to collapse
If you KNOW the cable is "good", the port may not be "GOOD". Does the cable work with another device?
The cable is definitely good(tried multiple and they work with other devices). I have been thinking it's the port in the device from the beginning, but was hoping maybe there was something else going on.