Huawei P30 Lite Bricked? - Android Q&A, Help & Troubleshooting

The device I'm working with is:
Huawei P30 Lite MAR-LX1A (LIVE DEMO)
9.1.0.220D (C891E4R2P1)
So trying to remove the demo software using SigmaKey, I did software testpoint using UPDATE.app from 9.1.0.317 (C431E5R2P3) being the closest version I could find as I could not find the exact firmware matching C891.
After this I was able to connect as port Huawei USB COM 1.0, which I thought was already bricked as I couldn't charge or power on the phone. I then tried to write another firmware which I thought would be similar to the original being 9.0.1.161D (C891E2R2P1).
Now since then the phone powers on and gets stuck on Huawei Logo, and the only mode I can get to is Fastboot&Rescue. I cannot go into upgrade mode, it will just get stuck on logo screen. And now the device is detected as "^ Android Sooner Single ADB Interface …”.
Is there any way to save the phone from only the fastboot screen?
Thanks!

I beleive this one is pretty similar if not the same than MAR-LX3A or MAR-LX22A
this device don't have just a recovery partition it has 2, you have recovery_ramdisk and erecovery_ramdisk
if you still have the erecovery partition working you should be able to unbrick the phone. I happened to go trough the same situation.
to boot from each you need to do pretty similar steps
Recovery: hold "volume up" + Power button as soon as the huawei splash screen withe the logo release both keys.
eRecovery: hold "volume up" + Power button, but keep holding those through the splash screen after the splash keep pressing them for a little longer until the eRecovery screen shows up, it comes with basic wifi connectivity so you can download the stock ROM and rescue your phone.
make sure to disconnect the charging cable when doing so, and better if you turn off the phone completly and try if from complete shutdown.
that trick is not clarified almost anywhere in the net, it took a wihle for me to findout why sometimes it would boot to recovery and sometimes to erecovery..
it seems like after the splash screen the phone still have a choise for booting, similar to installing a BIOS based os in a EUFI firmware mb.
I dont think there are other roms in this device working at this point. all you can do is patch a magisk image and flash it to the recovery_ramdisk partition, that will get you root access, but custom ROM is another story
If I happen to get one, I will let you know.

Boa noite, boa tarde ou bom dia. Meu amigo tem um MAR-LX3A nessa situação e não estou encontrando solução. Por acaso você tem a rom e os drivers dele para me ajudar? Muito obrigado antecipadamente.

Related

How to unlock Huawei MediaPad 7 Lite locked after "too many patterns attemts"

How to unlock Huawei MediaPad 7 Lite locked after "too many patterns attemts"
One of my friends have a Huawei MediaPad 7 Lite S7-931u. Recently his son tried few pattern attempts & It began to ask google account to unlock saying "Too many pattern attempts"
But it is not possible as it doesn't connect to Wifi or mobile network in this status!
Its ICS unrooted one & he doesn't know whether debugging enabled or not & no recoveries installed..
We both tied to upgrade it with official update from Huawei(by copying "dload" to SDcard). But instead of upgrading it restarts normally to the above screen asking to sign in to google account to unlock.
so the tablet became totally useless.
Is there a way to Hardreset/Install a new ROM or any other method to make this work?
jhha said:
One of my friends have a Huawei MediaPad 7 Lite S7-931u. Recently his son tried few pattern attempts & It began to ask google account to unlock saying "Too many pattern attempts"
But it is not possible as it doesn't connect to Wifi or mobile network in this status!
Its ICS unrooted one & he doesn't know whether debugging enabled or not & no recoveries installed..
We both tied to upgrade it with official update from Huawei(by copying "dload" to SDcard). But instead of upgrading it restarts normally to the above screen asking to sign in to google account to unlock.
so the tablet became totally useless.
Is there a way to Hardreset/Install a new ROM or any other method to make this work?
Click to expand...
Click to collapse
what i have learned for updating is, to extract the update.app and unlmt.cfg to your sd card root.
then while the mediapad 7 lite turned off, simultaneously press power key and volume down, once you see the bootscreen huawei mediapad 7 lite continue to press volume down key, til you see the android icon, release the volume key down and while the gear is moving press one more time the volume down key. it will reboot for about 2 to 5 minutes and it will be upgraded or reflashed, because there is no update from their website, the same update ICS 4.0.3. to factory reset it, you can press power and volume down key simultaneously and once you feel it vibrates, continue pressing the volume up key. your media pad 7 lite will be factory reset again.
good luck and i hope this helps. you
First of all: while device is off press "power" and "left" together... after vibration, release "power", but keep pressing "left".
If this was done right, the "fastboot" loader comes up.
When you got to this point, you could be hleped further.
Greets Gunnar
mediapad 7 lite force upgrade
I had the same problem with my tab and i have solved it.
jhha you are doing the right method just missing out a few steps maybe
Click to expand...
Click to collapse
Now try these steps-
download the device software from the huawei website (go to huaweidevice.com ==>select mediapad 7 lite from smartphones list ==>click on software tab ) according to your device
Extract the files to your computer and read the manual given in the downloaded zip file "CAREFULLY"
Keep in find that the SD card must hav atleast 2Gb free space after the dload files have been put into it
Make sure your sd card's format is FAT (you can do that by formatting the sd card on your pc and changing the format there)
Don't worry about the optional files(as they are optional)
Just read the manual and follow the above steps and you are done
Cant reset
GunnarWeibrink said:
First of all: while device is off press "power" and "left" together... after vibration, release "power", but keep pressing "left".
If this was done right, the "fastboot" loader comes up.
When you got to this point, you could be hleped further.
Greets Gunnar
Click to expand...
Click to collapse
Hello,
I tried it and now the android icon appears but it only restart after that,
I've fixed my problem this way:
1. turn off tablet
2. press and hold power and left key simultaneously
3. once you see the logo of huawei, release left key and immediately press right key continously till you see the android icon and the gear moving around
4. continue pressing volume up key until it reboots
5. once it reboots, you will notice that it will ask for your email,so it is on factory default settings now
Please ignore post. Sorry for the mess.
need step for flashing tablet S7-302u in my country is Claro Ecuador.. Need drivers of is it tablet.
sorry my bad english.
Regards.
GeorgeEcuador
GeorgeEcuador said:
need step for flashing tablet S7-302u in my country is Claro Ecuador.. Need drivers of is it tablet.
sorry my bad english.
Regards.
GeorgeEcuador
Click to expand...
Click to collapse
hello george,
i am not very good on mediapad 7 lite, but i will try my best to help you,
go to their website here. on their "search download by keyword", type S7-302U and click submit, it will lead you to your firmware download. download the firmware and be careful to follow the steps on flashing it. methods are on this thread. just follow the clear steps for you.
good luck and hope this helps you.
hard reret done by tecceljjr
:good:
to start excuse my English
but use google
good eh seen that there is nothing to do a factory reset
for this tablet s7-931w
in fact the brand firmware bug
ok the procedure is as follows
press the two volume buttons up and down
followed pwr
vibrate when pwr button release
and leave the other buttons are held
then appears the android with gears
hold the volume button up and let down the Volume Down
wait ask your new account and user data
spanish:
para empezar disculpen mi ingles
pero uso google
bueno eh visto que no hay nada para hacer un restablecimiento de fabrica
para esta tablet s7-931w
de hecho el firmware marca error
ok el procedure es el siguiente
press los 2 botones volumen arriba y abajo
seguido del pwr
en el momento que vibre soltar boton de pwr
y dejar los otros botones oprimidos
en ese momento aparece el android con engranes
soltar el boton de volumen arriba y dejar oprimido el de volumen abajo
esperar pida tu nueva cuenta y datos de user
S
Dear friends,
This is the way you can reset s7-931u. i did it twice.
1. power off your tab
2. press the three buttons (power + volume up + volume down.)
3. release the power button when you see the logo and keep pressing the two bouttons till you see the gear.
4. release the volume up without releasing the volume down.
Wait till you see a yellow bar under the gear then you can release it.
wait till the display says OK and thats it
Best Regards.
unlock mediapad
you go also try flashing it using sp flash tool
---------- Post added at 12:35 PM ---------- Previous post was at 12:28 PM ----------
kwjsuraweera said:
Hello,
I tried it and now the android icon appears but it only restart after that,
Click to expand...
Click to collapse
yeah that method might not work because that requires a custom mod usually cmw to be installed
try force upgrading instead.i have given the steps above
thanks thanks 1000000000
good :highfive::highfive::highfive::highfive::laugh::laugh::laugh::laugh::laugh:
mazen_al_ahmar said:
Dear friends,
This is the way you can reset s7-931u. i did it twice.
1. power off your tab
2. press the three buttons (power + volume up + volume down.)
3. release the power button when you see the logo and keep pressing the two bouttons till you see the gear.
4. release the volume up without releasing the volume down.
Wait till you see a yellow bar under the gear then you can release it.
wait till the display says OK and thats it
Best Regards.
Click to expand...
Click to collapse
Thanks
Confirmed.
This Hard-Reset work. Only need to charge battery more 20%.
No need re-flash firmware. Only make Hard-Reset with up steps and device will be reseted.
regards Svetil
svetli said:
Thanks
Confirmed.
This Hard-Reset work. Only need to charge battery more 20%.
No need re-flash firmware. Only make Hard-Reset with up steps and device will be reseted.
regards Svetil
Click to expand...
Click to collapse
You welcome anytime.
Deodexing firmware Huawei MediaPad 7 Lite
How to deodex firmware or individual application files (apk odex)?
Thanks advance for your reply.

Moto E Stuck in Bootloop, cant get into download/recovery mode

Tried to restore the MOTO E Indian DUAL SIM version to stock state as wanted to give it to someone, and when i applied the batch file to initiate commands, all went well for the few initial seconds after which the .img failed to load and the phone is not now stuck in bootloop. As i was running the CM 11 on it, the Cyanogen MOD logo keeps on running with nothing else happening.
Kindly help me - is my phone bricked, can it be brought back to normal state, if yes how?
Kindly guide me. Thank you devs
TacTieTee said:
Tried to restore the MOTO E Indian DUAL SIM version to stock state as wanted to give it to someone, and when i applied the batch file to initiate commands, all went well for the few initial seconds after which the .img failed to load and the phone is not now stuck in bootloop. As i was running the CM 11 on it, the Cyanogen MOD logo keeps on running with nothing else happening.
Kindly help me - is my phone bricked, can it be brought back to normal state, if yes how?
Kindly guide me. Thank you devs
Click to expand...
Click to collapse
I would recommend fully powering off the device, and then powering on the device using the button key combination to boot into recovery mode.
shimp208 said:
I would recommend fully powering off the device, and then powering on the device using the button key combination to boot into recovery mode.
Click to expand...
Click to collapse
Hi, thanx for the reply but the problem is that whenever the phone has charge, it only opens and bootloops. The bootloop stops only when the battery is drained out. The phone is not able to switch off completely as you suggest.
TacTieTee said:
Hi, thanx for the reply but the problem is that whenever the phone has charge, it only opens and bootloops. The bootloop stops only when the battery is drained out. The phone is not able to switch off completely as you suggest.
Click to expand...
Click to collapse
Try holding the power button for several seconds until you hear it vibrate then it should fully shutdown.
TacTieTee said:
Hi, thanx for the reply but the problem is that whenever the phone has charge, it only opens and bootloops. The bootloop stops only when the battery is drained out. The phone is not able to switch off completely as you suggest.
Click to expand...
Click to collapse
Hi TacTieTe, I have same problem with you, How do you fix it? Can you please share Thanks
Does anyone have any idea how to fix this?
MY daughters phone is the exact same, if there's a charge on the phone it boot loops, there doesn't seem to be any way to get it into Recovery or turn it off
Facing Similar issue,
Non-Rooted, No custom rom installed. I had recently done OTA update of ~10mb.
Cant access recovery http://cdn3.xda-developers.com/images/smilies/crying.gif for every selection i get a reboot, except for barcodes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_______________________
Was able to solve the issue using Data Scrub Tool https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b as manual removal [of (bootloader) ]was giving out the error message to unlock it.
Installed TWRP, and finally in process Stock Firmwares http://forum.xda-developers.com/showthread.php?t=2759495
I have the same problem. unrooted, unflashed device.
Unable to factory reset, hard reset via recovery. It simply keeps restarting and ends up bootlooping.
I just got into the same situation with my surnia. I just kept holding vol down and sometimes power button - for a VERY long time - eventually it just went into fastboot mode. So I guess if one times it correctly during the bootlooping, there should exist a window in which it works. If you're considering giving it up, just give this a shot for like 5 minutes.
blu88 said:
I have the same problem. unrooted, unflashed device.
Unable to factory reset, hard reset via recovery. It simply keeps restarting and ends up bootlooping.
Click to expand...
Click to collapse
reset via fastboot
tipu185 said:
Was able to solve the issue using Data Scrub Tool https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b as manual removal [of (bootloader) ]was giving out the error message to unlock it.
Installed TWRP, and finally in process Stock Firmwares http://forum.xda-developers.com/showthread.php?t=2759495
Click to expand...
Click to collapse
I tried to install TWRP but it gives following error
Code:
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 299892736 bytes
sending 'recovery' (10270 KB)...
OKAY [ 0.410s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 5.488s
I'm not familiar with this process though, stumbled on here while looking for solutions.
shimp208 said:
Try holding the power button for several seconds until you hear it vibrate then it should fully shutdown.
Click to expand...
Click to collapse
I have a Moto E that had the same problem when i flashed a dirty rom and Moto E doesn't fully shutdown on holding the power button while in a bootloop. It restarts.
Follow these steps to get into recovery mode-
Step 1. Hold the power button until the screen goes black.
Step 2. Leave the power button for around 1 second.
Step 3. Now hold the power button and the volume down key for around 3 seconds (The combination to enter bootloader).
Step 4.You will now see the bootloader menu screen. Select recovery and either restore the nandroid backup (if present) or flash a clean rom.
NOTE: You can fail the first few times but this is the only easy method to get out of a bootloop in moto e. It's all about timing.
Hope it helps
i just got into the same situation with my moto e. I just kept holding vol down and sometimes power button - for a VERY long time - eventually it just went into fastboot mode. and i slcted recovery in fastboot but it again stuck.
im using cm13 nightly.. can i again install new custom rom and how..???
I have a MOTO E XT1025 no matter the rom I install
he always locks the boot.
Help!
Raunaq Ray said:
I have a Moto E that had the same problem when i flashed a dirty rom and Moto E doesn't fully shutdown on holding the power button while in a bootloop. It restarts.
Follow these steps to get into recovery mode-
Step 1. Hold the power button until the screen goes black.
Step 2. Leave the power button for around 1 second.
Step 3. Now hold the power button and the volume down key for around 3 seconds (The combination to enter bootloader).
Step 4.You will now see the bootloader menu screen. Select recovery and either restore the nandroid backup (if present) or flash a clean rom.
NOTE: You can fail the first few times but this is the only easy method to get out of a bootloop in moto e. It's all about timing.
Hope it helps
Click to expand...
Click to collapse
Best answer.
same here. *sigh*, time to buy a new phone
TacTieTee said:
Tried to restore the MOTO E Indian DUAL SIM version to stock state as wanted to give it to someone, and when i applied the batch file to initiate commands, all went well for the few initial seconds after which the .img failed to load and the phone is not now stuck in bootloop. As i was running the CM 11 on it, the Cyanogen MOD logo keeps on running with nothing else happening.
Kindly help me - is my phone bricked, can it be brought back to normal state, if yes how?
Kindly guide me. Thank you devs
Click to expand...
Click to collapse
I know this problem.
Just flash twrp recovery.
Wipe daliv cache/ cache/data/internal storage .
Flash cm 12/13/14 with respective gapps.
Enjoy
my moto e3 power bootloop problm kar raha hai hard bootloder b nhi open ho raha and bs moto likh kar aata hai or kuch nhi hota ....phn rooted hai and twrp load kiya th oske baad phn ko off kiya to bs oske baad kuch ho nhi raha sab krke dekh liya key etc b try kiya but nhi huwa thk kya kru bhai btao yr
pradeep095 said:
my moto e3 power bootloop problm kar raha hai hard bootloder b nhi open ho raha and bs moto likh kar aata hai or kuch nhi hota ....phn rooted hai and twrp load kiya th oske baad phn ko off kiya to bs oske baad kuch ho nhi raha sab krke dekh liya key etc b try kiya but nhi huwa thk kya kru bhai btao yr
Click to expand...
Click to collapse
Send SS. Press power button for atleast 1 minutes and if screen goes off try the key combos.
pradeep095 said:
my moto e3 power bootloop problm kar raha hai hard bootloder b nhi open ho raha and bs moto likh kar aata hai or kuch nhi hota ....phn rooted hai and twrp load kiya th oske baad phn ko off kiya to bs oske baad kuch ho nhi raha sab krke dekh liya key etc b try kiya but nhi huwa thk kya kru bhai btao yr
Click to expand...
Click to collapse
Try these steps:
Step 1. Hold the power button until the screen goes black.
Step 2. Leave the power button for around 1 second.
Step 3. Now hold the power button and the volume down key for around 3 seconds (The combination to enter bootloader).
Step 4.You will now see the bootloader menu screen. Select recovery and either restore the nandroid backup (if present) or flash a clean rom.

7 Honor reboot continuously

honor 7 in continuous reboot I tried to install all firmware 100-130 but when I go to press 3 keys vol + vol - to enter forced upgrades do not work, I used various methods the last one with tool to honor 7.
I used files
boot.img
recovery.img
cust.img
system.img
fw b100 but the cell goes into continuous reboot eie keys vol + vol- not work, but using the update recovery.img mm B313 keys vol + vol- work but does not load the firmware placed in the folder dload crashes 5% ... help me
have the same problems,
triggered by flash TWRP 2.8.7.0 in B170
same results in all tests as Raffaele
same **** here
We need HEEELP!!
Same as the others. Cant do sh*t about that.
raffaele0084 said:
honor 7 in continuous reboot I tried to install all firmware 100-130 but when I go to press 3 keys vol + vol - to enter forced upgrades do not work, I used various methods the last one with tool to honor 7.
I used files
boot.img
recovery.img
cust.img
system.img
fw b100 but the cell goes into continuous reboot eie keys vol + vol- not work, but using the update recovery.img mm B313 keys vol + vol- work but does not load the firmware placed in the folder dload crashes 5% ... help me
Click to expand...
Click to collapse
.img files can only be flashed from an unlocked bootloader.
Try this order (B100 Full Firmware):
Boot
System
Recovery
Cust
Cache
Userdata (deletes everything on internal SD, so be careful)
I also advise to stay away from the MM beta update for now since it's a no go for me too and for many more.
Just go up to B130 or B140 if you can for now. The full MM update is coming soon anyway.
Risolto grazie ad un angelo su xda grazie cmq a tutti ho installato dalla b130 i file system.IMG boot.IMG cust.IMG recovery.IMG dopo aver installato tutto ho scaricato la b170 e ho installato solo boot.IMG e recovery.IMG con fastboot ed e partito poi con i tasti vol+ vol- e power installare il file update completo da 3 giga
just a question, are you using a case that covers the power button?
in my case, i solved by bending the outer shell of the case
if you are not, then just ignore me....
edit:
can you boot to the homescreen?
raffaele0084 said:
honor 7 in continuous reboot I tried to install all firmware 100-130 but when I go to press 3 keys vol + vol - to enter forced upgrades do not work, I used various methods the last one with tool to honor 7.
I used files
boot.img
recovery.img
cust.img
system.img
fw b100 but the cell goes into continuous reboot eie keys vol + vol- not work, but using the update recovery.img mm B313 keys vol + vol- work but does not load the firmware placed in the folder dload crashes 5% ... help me
Click to expand...
Click to collapse
It is likely that your external SDCARD is not detected by system. I am suspecting that also low free space on SDCARD might cause problems. The format of external SDCARD should be FAT or FAT32.
if you have tried to flash twrp after updating to b170 you have to extract boot and recovery from b170 update.app and flash both with fastboot + flash system.img from full b121 > your system should start up now and you should be able to enter stock recovery.
after that you have to put udate.app from b313 downgrade package into your download folder and install it (it will fail at 95%, but the b300 system will boot) after that place the update.app from the full b121 into dload folder and start the update process. you should be back at a full working b121.
http://forum.xda-developers.com/showpost.php?p=64592849&postcount=9
This post is unexpected. Don't know how to delete it (can just do an edit)!
Bootloop solved
You can see the thread "Bootloop solved : My Honor 7 lives again".
Perhaps it could be help you to get the bootloop away.
Hi, I had the continuous restart issue and working fine when its connected to original charger. For this my kind advice is, change your battery.
In case if you need contact me - 9842184878.
Huawei Honor 6 - Bootloop Problem
Kesavan16 said:
Hi, I had the continuous restart issue and working fine when its connected to original charger. For this my kind advice is, change your battery.
In case if you need contact me - 9842184878.
Click to expand...
Click to collapse
My Huawei Honor 6 was working completely fine last night. Charger plugging my mobile normal working and unplugged it in the charger it will not turn on. I’ve tried multiple things to troubleshoot this issue; I have tried to my computer, and multiple wall outlets, using multiple chargers and cables. There are vibrations with Honor Logo that come on and auto Restart (Boot Loop) Problem… Do you have any other ideas? Please give me solution
if battery problem, i ll change it. battery cost? if you have new original honor 6 battery?

Im having trouble booting to recovery

Hi,
I just flashed twrp following the instrustions from a thread on here at the following link.
https://forum.xda-developers.com/lg-k7/how-to/t-mobile-lg-k7-thread-t3481844
Now when I try to boot into recovery by holding the buttons together to install su, it just boots up how it normally would.
Ive tried every possible combination of buttons to hold, I even tried booting to recovery from the command line by typing
adb reboot recovery
which it does reboot but to a screen with the android laying down opened with an explanation mark with in a triangle and underneath the total image it says no command Does anyone have any ideas of what im doing wrong or suggestions
any help would be much appreciated thank you!
Fields46391 said:
Hi,
I just flashed twrp following the instrustions from a thread on here at the following link.
https://forum.xda-developers.com/lg-k7/how-to/t-mobile-lg-k7-thread-t3481844
Now when I try to boot into recovery by holding the buttons together to install su, it just boots up how it normally would.
Ive tried every possible combination of buttons to hold, I even tried booting to recovery from the command line by typing
adb reboot recovery
which it does reboot but to a screen with the android laying down opened with an explanation mark with in a triangle and underneath the total image it says no command Does anyone have any ideas of what im doing wrong or suggestions
any help would be much appreciated thank you!
Click to expand...
Click to collapse
I've had the same problem, except If I input adb reboot recovery I actually get into the recovery. Have you tried flashing with the TWRP app?
EDIT: I have your solution. Reflash TWRP 3.1.0.0 using the TWRP app, turn off your phone. Holding Volume Down, hold down the Power button until you see the LG screen, then press Power again. Select Yes on the screen that appears, then Yes again. You will be taken to TWRP.
Top Feel said:
I've had the same problem, except If I input adb reboot recovery I actually get into the recovery. Have you tried flashing with the TWRP app?
EDIT: I have your solution. Reflash TWRP 3.1.0.0 using the TWRP app, turn off your phone. Holding Volume Down, hold down the Power button until you see the LG screen, then press Power again. Select Yes on the screen that appears, then Yes again. You will be taken to TWRP.
Click to expand...
Click to collapse
Hi,
Thanks for the response, however I did actually figure it out later the night that I posted this. I just ended up typing adb help and read through the commands and after a little playing around did adb reboot recovery, but I would get the read explanation mark. So then I rebooted into the bootloader typed fastboot boot twrp-image-3.image which got me in then I installed the SuperSU zip then from the bootloader I reflashed twrp rebooted finished Installing SuperSU then did adb reboot recovery and it brought twrp right up. So that took care of the red explanation mark. Though I still cant bring up recovery by using the button combination method, but adb reboot recovery works just fine. As far as I can tell I am rooted, however this is my first time doing this so im not too sure what all I can do.
Nesesito ayuda con mi lg_k330 no entra a modo descargar le he hecho de todo el telefono me detine las aplicaciones y nesesito hacerle la rom alguien me ayudaria con este problema ya que lo reseteo de fabrica y aun continua deteniendo la aplicaciones.

Samsung S10+ always boots into download mode

Hi,
I have a s10+ and I flashed twrp. After this, my phone doesn't boot to recovery, just Download mode. I tried to boot into unlock bootloader section, but I couldn't because it loads into Download mode very fast.
At this screen:
Error verifying vbmeta image: OK_NOT_SIGNED(3)
CUSTOM VBMETA
VBMETA : No sign info
VBMETA .
Anyone could help? Thank you!
Hashman1980 said:
Hi,
I have a s10+ and I flashed twrp. After this, my phone doesn't boot to recovery, just Download mode. I tried to boot into unlock bootloader section, but I couldn't because it loads into Download mode very fast.
At this screen:
Error verifying vbmeta image: OK_NOT_SIGNED(3)
CUSTOM VBMETA
VBMETA : No sign info
VBMETA .
Anyone could help? Thank you!
Click to expand...
Click to collapse
You might have to reflash your stock rom.... And then go threw setup and go in develop settings activate oem unlock and then flash Twrp you got a galaxy 10 and now your warrant is void with Samsung cause you triggered the flash counter by putting twrp and its not even working correctly you got to be careful with these expensive phones...
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
PoochyX said:
You might have to reflash your stock rom.... And then go threw setup and go in develop settings activate oem unlock and then flash Twrp you got a galaxy 10 and now your warrant is void with Samsung cause you triggered the flash counter by putting twrp and its not even working correctly you got to be careful with these expensive phones...
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
So, It doesn't have to being open bootloader if I want to flash stock rom? Bc my bl is locked and I cant access it.
Bro you can't flash twrp without a open bootloader only the international models of the galaxy 10 have unlocked bootloader next time you buy an expensive phone and want to modify it research it first to see if it's modifiable
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
---------- Post added at 02:38 AM ---------- Previous post was at 02:36 AM ----------
PoochyX said:
Bro you can't flash twrp without a open bootloader only the international models of the galaxy 10 have unlocked bootloader next time you buy an expensive phone and want to modify it research it first to see if it's modifiable
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
You can flash stock rom threw Odin in download Mode with a locked bootloader to get your phone to function again
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Okay, I flashed the stock rom. Now the phone doesn't boot into download mode, but also I think it stucked at samsung logo. I cant boot into recovery, download mode neither. The only thing what I can do is power+vol down. But after this, the phone restarts and stucks at samsung logo again...
Hashman1980 said:
Okay, I flashed the stock rom. Now the phone doesn't boot into download mode, but also I think it stucked at samsung logo. I cant boot into recovery, download mode neither. The only thing what I can do is power+vol down. But after this, the phone restarts and stucks at samsung logo again...
Click to expand...
Click to collapse
Damn that's crazy
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Hashman1980 said:
Hi,
I have a s10+ and I flashed twrp. After this, my phone doesn't boot to recovery, just Download mode. I tried to boot into unlock bootloader section, but I couldn't because it loads into Download mode very fast.
At this screen:
Error verifying vbmeta image: OK_NOT_SIGNED(3)
CUSTOM VBMETA
VBMETA : No sign info
VBMETA .
Anyone could help? Thank you!
Click to expand...
Click to collapse
Hey, I'm having the exact same problem with my Galaxy A50, did you manage to solve the issue?
Then great job, you hard bricked one of the most expensive phones on the market... You should really do a research or at least a Nandroid backup before modifying your phone. This is a lesson for all of those who just flash and don't care. No hate bro, but next time while flashing, be catefull!!!!
ArmandoVbS said:
Hey, I'm having the exact same problem with my Galaxy A50, did you manage to solve the issue?
Click to expand...
Click to collapse
Yes, I solved the problem but I dont know if it's good for A50 too.
So, you should try to boot into download mode. If you have the same problem, your phone boots very fast. You have to be faster. Hold power button and volume down, at the same time when connect your phone to pc.
After this, you will able to install (flash) the original rom from sammobile or etc.
Hashman1980 said:
Yes, I solved the problem but I dont know if it's good for A50 too.
So, you should try to boot into download mode. If you have the same problem, your phone boots very fast. You have to be faster. Hold power button and volume down, at the same time when connect your phone to pc.
After this, you will able to install (flash) the original rom from sammobile or etc.
Click to expand...
Click to collapse
Like you have a S10 this ain't no cheap entry phone you can tinker with u got to be careful
([emoji813]9/[emoji725]/9[emoji813])
PoochyX said:
Like you have a S10 this ain't no cheap entry phone you can tinker with u got to be careful
([emoji813]9/[emoji725]/9[emoji813])
Click to expand...
Click to collapse
Hello, today I decided to try root and install the magisk by odin, I did the bootloader unlock as it should, so I made the flash through odin of TWRP_S10 + _Magisk_Prepatched .... a problem happened, the device does not exit the download mode, I tried to get into the recovery and I did not get it, I tried to install the ROM stock and it hangs in odin, ..... DOWNLOAD MODE appears '' error vbmeta verifying image vbmeta: OK_NOT_SIGNED (3)
mobile does not go into recovery mode, only in download mode
Can someone help me here?
Baumel_cap said:
Hello, today I decided to try root and install the magisk by odin, I did the bootloader unlock as it should, so I made the flash through odin of TWRP_S10 + _Magisk_Prepatched .... a problem happened, the device does not exit the download mode, I tried to get into the recovery and I did not get it, I tried to install the ROM stock and it hangs in odin, ..... DOWNLOAD MODE appears '' error vbmeta verifying image vbmeta: OK_NOT_SIGNED (3)
mobile does not go into recovery mode, only in download mode
Can someone help me here?
Click to expand...
Click to collapse
Wow you messed up a S10 thats crazy
([emoji3590]09-09-18[emoji813])
Boa noite.
O meu S10 estava com a mesma mensagem de erro.
Consegui conectando e usando o ODIN com a Rom Original ZTO sem operadora.
Aqui no Brasil Originalmente uso com a operadora VIVO usando a Rom da VIVO não funcionou continua com erro, baixei a ROM ZTO que é de nenhuma operadora e deu Certo, tente com outra ROM que acho que vai funcionar.
Boa Sorte.
ArmandoVbS said:
Hey, I'm having the exact same problem with my Galaxy A50, did you manage to solve the issue?
Click to expand...
Click to collapse
excuse me, you managed to recover your A50 I have the same problem I return to the same screen when I press the lock button and low volume
Error verifying vbmeta image: OK_NOT_SIGNED(3)
CUSTOM VBMETA
VBMETA : No sign info
VBMETA .
Click to expand...
Click to collapse
This happens on Galaxy A51 (Exynos model A515F/DSN ) anyone have solution for this ?
If USB cable is plugged in (unplug it).
1. Press Volume Down and Power button, until the phone restarts.
2. Quickly plug back the USB cable and Hold Volume UP and then Press Volume UP again (OEM is now off and the Phone will reboot)
3. Quickly press Volume UP & Down on the same time again *don't remove USB cable*, until download mode comes up.
4. This time only press Volume UP.
Now you can install you roms.
xXAceNoob said:
If USB cable is plugged in (unplug it).
1. Press Volume Down and Power button, until the phone restarts.
2. Quickly plug back the USB cable and Hold Volume UP and then Press Volume UP again (OEM is now off and the Phone will reboot)
3. Quickly press Volume UP & Down on the same time again *don't remove USB cable*, until download mode comes up.
4. This time only press Volume UP.
Now you can install you roms.
Click to expand...
Click to collapse
This worked for my on my a50 after a few tries. I couldn't get it to work at first, but I got the most recent version of Odin and then it worked without issues.
shaolefen said:
This worked for my on my a50 after a few tries. I couldn't get it to work at first, but I got the most recent version of Odin and then it worked without issues.
Click to expand...
Click to collapse
How long did that take you? doing that right now but the Setup connection of Odin takes a long time for me.
Hashman1980 said:
Hi,
I have a s10+ and I flashed twrp. After this, my phone doesn't boot to recovery, just Download mode. I tried to boot into unlock bootloader section, but I couldn't because it loads into Download mode very fast.
At this screen:
Error verifying vbmeta image: OK_NOT_SIGNED(3)
CUSTOM VBMETA
VBMETA : No sign info
VBMETA .
Anyone could help? Thank you!
Click to expand...
Click to collapse
I managed to solve it!
simple!
hold down and power for it to restart, at the exact moment when it restarts, you press the two volumes, up and down, and connect the usb cable right after, before turning on, then a menu appears where you can hold up for 7 seconds and unlock the bootload
good god what a ****show of replies. Not once did anyone address the problem, just 1 idiot after another talking about how "expensive" the phone is.
My rooted s10 exynos does this also "error verifying vbmeta image" when it says "DOWNLOADING" instead of going to my latest twrp when installing it in Odin in the AP slow along with vbmeta.tar in the CP slot.
I wish we could remove all these idiots replies about how expensive they think the s10 is and just have the OP question and me saying I have the same problem and then me replying here when I find a fix.

Categories

Resources