Related
How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.
today my at&t tilt2 accidently fell from my hands and got heavily scratched on the chrome shell (bezel) the bezel even got few small dents & & the chrome colour came out
so i wanted to ask how can i remove this bezel,as i thought to remove it sand it & then paint it chrome again
& also suggest me is my idea good or not
no rplys? atleast tell me hw can i remove those scratches & dents
i wanna know this too since i just dropped mine today and its a fairly small chip but i still get a little crazy over it
please help us out
Sorry for bad news but to remove the bezel you'll need to fully dissassemble your TP2. You'll have to dismantle the main housing to unscrew hinges. Once you separate the upper part with LCD you'll be able to open it, and then separate the bezel from LCD and digitizer. I've done it myself couple of times but be aware that is not a 5 minute job (especially if you're new to this). You'll need tools - small philips screwdriver, small star screwdriver an special plastic prying tool (couple of them, they get broken easily, you don't have to use them but you'll most likely scratch the phone). You can get tool sets on ebay. Word of advice - if only possible try not to separate LCD and digitizer. Once you get dust and/or fingerprints between them it's a HELL of a job to get rid of them.
Check out mike channon's site for dissassembly guide.
Good luck guys!
EDIT: Personally, I would rather try to do some touch-up repairs without opening the phone if possible.
touch up repairs like what? suggest me something specific
I want to replace my screen and bezel but don't mind stripping the whole phone down if thats what is needed.
Try this link http://translate.google.co.uk/translate?u=http%3A%2F%2Fwww.pdacenter.ru%2Frazborka%2Fhtc_touch_pro2%2F&sl=ru&tl=en&hl=en&ie=UTF-8
As mentioned by pjm77 this does not look easy, and chances are if your not very careful you could mess up your phone.
By touch up I mean trying to paint the damage to make it less visible. Can't really say if that's possible in your case - judge for yourself. Dissassembling the whole phone is by all means possible, I was able to do it several times and I'm just an enthusiast. Just bear in mind that unless you're really skillfull and experienced you end up with a little damage here and there (clips broken, scratches etc.), it's time consuming and there is a risk of serious damage. In the end you may just put a lot of effort into it and be a little disappointed with the final result. But maybe not, it's up to you. Whatever your decision is - good luck!
EDIT: To be more specific I'll give you the real life example of touch-up. I had an awful, long and deep scratch on the back of my LCD (you can see that black, metal part when you slide out the keyboard). I took the masking tape and precisely shaped it in a way that only the scratch was visible (I'd say less than 0,5 of mm wide). Then I took a black paint (originally for my mother's renault) and painted the scratch. Aftrer half an hour I removed the masking tape. The repair is not perfect in any way, the scratch is still there if you know where to look. But I just never noticed it again and simply forgot about it until today.
I used a touch up pen from Staples that has metallic ink. It was a Silver Pilot Pen with Fine Point tip. Like pjm said, touch up paint isn't going to make it look perfect, but the scuffs on the chrome bezel are less noticeable. The ink is a little lighter than the chrome but makes the black cuffs disappear and is nice because you can get small marks with the fine point. I think it was $2.99.
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Movisman said:
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Click to expand...
Click to collapse
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
0semaj0 said:
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
Click to expand...
Click to collapse
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Movisman said:
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Click to expand...
Click to collapse
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
0semaj0 said:
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
Click to expand...
Click to collapse
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Movisman said:
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Click to expand...
Click to collapse
Hey Movis,
What did you end up doing for your dropped phone?
I too have dropped my phone on its corner and the chrome along with the plastic is now dented.
Another one with the same problem here. I managed to create a bump on the chrome bezel.
Can I bump this post as I've also just noticed a ding in the corner of the chrome bezel was wondering if anyone had found a solution to this yet.? short of replacing the LCD/digitiser which like OPs phone are working fine. It's just cosmetic damage.
I once was in a bad mood and snapped a screen and backing/housing in half.I can't remember exactly,but I'm thinking the chrome bit may be part of the thin metal casing/housing that is glue taped onto the screen.
You separate the screen from the housing by using a hot air gun sparingly.
If you look back at a motherboard thread I was involved in,a person on here called Roger put up a great video tutorial link that may answer all your questions...
Sent from my GT-I9100
Ah cheers for the reply. Had a look at the mobo post you were involved in followed it to the link and coincidentally that's the exact video I watched last night. Very good video good detail and instructions. But its the black one he is stripping down so he makes no reference to the bezel which afaik is only used on the white ones.
Sent from my GT-I9100 using xda premium
I've not seen the chrome bit listed separately,so I guess its part of the metal top housing that the LCD is glued to.I've got a white one and its got a ding on it too.
You could email Samsung to see if you can get the part,but I think its not worth risking cracking the screen and you probably couldn't resuse / would get that stupid gluey tape stuff.
Sent from my GT-I9100
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
vyks10 said:
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
Click to expand...
Click to collapse
Hi, will the heat actually damage the screen? I saw some posts mentioning about putting it into the oven and such. It sounded very intense but if it works without damaging the screen, i might give it a try. Facing the same situation as yours. Scratches and dents all over my front chrome bezel.
Do anyone has video or pdf or wtever guide to give the instruction how to disassemble the flyer?(i am thinking to repair the flyer myself) Thank you
Here you go:
www.techrepublic.com/photos/crackin...3?seq=2&tag=content;siu-container#photo-frame
thx, but i have 1 more question, do u know how to remove the digitizer? is it the same way as other smartphone?(use hot gun and remove the digitizer?)
athris said:
thx, but i have 1 more question, do u know how to remove the digitizer? is it the same way as other smartphone?(use hot gun and remove the digitizer?)
Click to expand...
Click to collapse
Yes, there is a note in the techrepublic teardown about it being bonded like a smartphone. You should however be vary careful given the size of the screen more heat (not temperature) is required, and the risk of thermally cracking the underlying LCD panel is correspondingly higher.
Beware! Learn from my adventures.
So, I took apart my wife's HTC Flyer this past week to replace the screen. While the Techrepublic teardown shots are helpful, it's missing about ten steps at the end that involve actually removing the screen. I've messed around with tabletpc's and laptops before but not cell phones so wasn't really prepared for the fact that you have to pretty much take the whole Flyer apart in order to be able to get the screen off. As far as I can tell, no one else has documented taking one of these apart to replace the screen. I will write up something more involved when I get a chance but here's a couple things that I found out about the screen.
1. The part of the screen that you touch with your finger and stylus is not glass! It is a heavy plastic layer that is adhered to the glass digitizer. It is clear with the black around the edge and cutout for the HTC logo. This was the part of my screen that had chips in it. I tried to use a screen repair kit to repair the chips (which I did) but it took off the outer, darker finish in the process. So I moved to the next step, replacing the screen. I didn't know about the outer layer, otherwise that would have been much easier to replace. But, I don't think you can get that part unless you have connections with HTC.
2. The outer layer/digitizer glass comes as one part (along with the n-trig connector). I ordered mine for around $50 on ebay.
3. You will need to take the back off and much of the motherboard to be able to disconnect the n-trig connector.
4. Taking the screen off will take heat. I used a hair dryer but more heat could be better although you have to be careful of the lcd underneath. My digitizer broke while removing and ending up putting a small gouge in the lcd. I was able to fix the lcd well enough, just be careful.
5. HTC used a buttload of sticky tape to secure the glass to the lcd and case. My cheap blue pry tool quickly broke so I ended up using a plastic butter knife to separate digitizer from the case. Once off, I used Goo Be Gone to get rid of all the sticky tape from it. I'm ready to put new tape on but I'm not sure exactly what they used. Anyone have any ideas? It's a black, closed cell sticky tape that is really stringy when it comes to taking off. Most of the stuff I see for sale online seems to be really thin stuff. I picked up some Scotch Outdoor Mounting Tape by 3M that looks to be similar that I am going to experiment with. Anyone know for sure what they used?
6. I put the new digitizer on temporarily to check to see if it worked and it did (yay)! But I still need need to cut all of the tape and put it in the right spot. There are also these little plastic tabs that go on the backside of the screen. They are used to refract light from the led's to light up the outside navigation buttons. Be careful not to lose these. I did, and had to make one. We'll see how I did once I get it back together.
7. I found that there's not a lot of parts out there for these things. At least not compared to cell phones. Now that they're being discontinued, I don't know if that is going to help.
Anyway, I took a few pics along the way and will try to write something up when I get more time. I just wanted to give folks a heads-up on the screen and how it's put together. I can't imagine the View's screen is any different. So whatever they're using for the outer layer isn't Gorilla Glass. Or is it?
UPDATE:
Here are the promised photos of this disaster. I'll add the commentary tomorrow (I'm tired).
Two more comments and I can finally upload my photos.
I need to replace my LCD and Glass...anyone know where I can order these parts...I cant find them anywhere.
Hard to find parts for the Flyer/View which could be a problem. Looks like some is selling an LCD, though on eBay.
http://www.ebay.com/itm/PH-LCD-HT-2...360?pt=LH_DefaultDomain_0&hash=item27bf8f0390 from my PG41200 using Tapatalk
I purchased mine here and it works great.
http://www.ebay.com/itm/260906551668?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Much better price. What kind of tape did you use? Also did you have to replace any of the light reflacting plastic tabs that are used to light the buttons around the outside of the digitizer?
Sent from my PG41200 using Tapatalk
Will a replacement screen for the Flyer work well on a View?
I don't see why not. Except for some of the internals, they are pretty much identical hardware wise.
Dear all,
I am here to just warn you of who ever owns a roxfit case, for those who have not stick it on to their phone you might want to reconsider before doing so. And for those who have it on already you might want to reconsider as well.
I bought this case like a month ago and used it for a month. Yes it is a good case "full protection" but when i tried to take it off today i realized the following:
1- it is a PAIN in the ____ to take it off, I am not even kidding. You might think why would you want to take it off? cause one day you want to clean up the dust, take out the sim card, or maybe switch case. I nearly had to break the top left corner, that little thin strand infront of the power button, and find something to stick into the top right.
Yes, i know it might not be the right way to take it off, but I have done some research and it seems like no one knows what is the "proper way" to take it off.
ANYWAY to get to the worst part
2- you know the inside of the case it has the black rectangle thingy with white words on it saying "roxfit?" Well, when i took off the case, i realized a bunch of little tiny black/grey dots on the back of my phone. No, I cannot rub it off, and i also tried erasing it off (which is not a good idea, cause it does rub off the anti-coating and causes it to look shiny which was described in another thread)
I know its just the back cover, but still...
Not trying to complain or anything, just keep your eyes open when choosing your case
LitoNi said:
Dear all,
I am here to just warn you of who ever owns a roxfit case, for those who have not stick it on to their phone you might want to reconsider before doing so. And for those who have it on already you might want to reconsider as well.
I bought this case like a month ago and used it for a month. Yes it is a good case "full protection" but when i tried to take it off today i realized the following:
1- it is a PAIN in the ____ to take it off, I am not even kidding. You might think why would you want to take it off? cause one day you want to clean up the dust, take out the sim card, or maybe switch case. I nearly had to break the top left corner, that little thin strand infront of the power button, and find something to stick into the top right.
Yes, i know it might not be the right way to take it off, but I have done some research and it seems like no one knows what is the "proper way" to take it off.
ANYWAY to get to the worst part
2- you know the inside of the case it has the black rectangle thingy with white words on it saying "roxfit?" Well, when i took off the case, i realized a bunch of little tiny black/grey dots on the back of my phone. No, I cannot rub it off, and i also tried erasing it off (which is not a good idea, cause it does rub off the anti-coating and causes it to look shiny which was described in another thread)
I know its just the back cover, but still...
Not trying to complain or anything, just keep your eyes open when choosing your case
Click to expand...
Click to collapse
I've have 2 of their products for my S, I have the hard shell, which I broke trying to take it off, those little this bits near the switches are a pain and a weak spot. This case had a thin felt patch inside to stop it rubbing the back of my S.
I also have the leather flip over case , i've had to stop using this because unlike the hard shell there is no felt patch inside to stop it rubbing , now I have marks on the back of my phone.
For the money I paid for these items, you'd think a bit more thought would go into the design...
I know, matte coating is not a cool thing, it just feels nice.
i dont know about your XPS but on mine the front bottom part where it says "xperia" that part is also glossy shiny, obviously that part's anti coating is rubbing off just by putting in my pockets.
this is what i am planning to do instead of making the same mistakes again.
the best thing to do is to get the zagg full body kit and protect the [ top, bottom, and the "xperia part" on the front ] and then get a case that only covers the sides and the back.
I had a roxfit and never had such problems.
Sent from my LT26i using Tapatalk 2
Thanks for the warning. In the case thread there was someone saying something about the shell feeling loose. (maybe it was you, dont remember).
I guess thats what you get with a hard shell that covers the phone's back and sides completely unless it was made of two parts or from soft material like TPU. I thought of buying this on long time ago because none of the TPU cases had a good fitt (and the buttons still usable).
I never did buy this one, but thougt about it since it's for me the best next to my TPU preference. I'm using a (little reshaped with hot water) 'Nillkin' TPU case at the moment. I also have a 'Gimmick Five' hard case, but i don't like the edges (like almost all hard cases) , its not smooth when putting it in and getting it out of my pocket for a phone with this size. I also do't think those cases offer much protection.
If you're planning on buying a ZAGG invisibleShield read this too: http://forum.xda-developers.com/showpost.php?p=27896421&postcount=6
and remember this skin is only for scratches not fall damage duh (cases/covers/shells might help a little with low height falls)
---------- Post added at 03:19 PM ---------- Previous post was at 02:57 PM ----------
superlimau said:
I had a roxfit and never had such problems.
Click to expand...
Click to collapse
Can you give us some more info? how is the fit? is it easy to take out? do you have any little scratches of the coating on the edges?
@LitoNi The case is a little flexible, maybe it has also to do with how someone tries to pull of the case?
I took my case many times off. Yeah it's not easy, that's for sure but I can't confirm your other complaints.
My phone slipped once out of my hand and landed on hard ground. I just have a few scratches on the top right corner and bottom left corner.
without the case the damage would have been probably much worse.
The case also was damaged in the bottom.
Currently I'm waiting for my nillkin flip leather case. Hope it will protect the front as well now.
Edit: that is now a little embarrassing. I actually have a krusell case, but the should be the same
I have the roxfit hard shell as well. It fits perfectly and doesn't feel loose at all. As for taking it off, well yeah it's a snug fit, so taking it off requires a bit of fiddling. But it is definitely not impossible to take it off without breaking it. Then again you shouldn't have to take it off daily, so for me it's not a problem.I usually just push the bottom corners of the case down, then you can stick your nail through the hole on the bottom and just push the phone out completely. Not that hard to do.
Also mine does not leave any traces on the phone. I'm pretty happy with this case.
Sent from my LT26i using xda app-developers app
i guess i was just the unlucky one with the stains.
anyway i changed the title so it wont be directly talking about roxfit, but cases in general
taking it out is slightly a pain in the ass... you need to flick it out from the powet button corner follow by volume side... one you flick it past both the 2 buttons, the rest is a breeze...
no there's no stain on the phone....
thanks
Thanks for the warning..
superlimau said:
taking it out is slightly a pain in the ass... you need to flick it out from the powet button corner follow by volume side... one you flick it past both the 2 buttons, the rest is a breeze...
no there's no stain on the phone....
Click to expand...
Click to collapse
i start with the left side and bottom, then top side and last the right side. works everytime
Let me add that there is also a slider shell case: Incipio EDGE Hard Shell Slider Case
But please talk about this on the Xperia S Case show thread and let this thread be only for the Roxfit and Krusell shells :fingers-crossed:
It has done exactly the same to my phone....It's a joke!!!!!