I have searched for this and found the same question posted in a HD2 Android category, but there were no responses... so asking for myself in here.
I have all my phone numbers listed in my contacts with the preceeding area code, as I often travel outside of the local area and need those area codes included in my contacts numbers..... ie: all my phone numbers are 10 digits in length.
However, there doesn't seem to be a requirement for the area code to be sent, when a caller has Caller-ID enabled. In other words, I receive some calls from contacts in my phone, but if their phone doesn't include the area code in their Caller-ID, then my phone doesn't recognise or identify the number. Consequently, when hanging up from those calls, it constantly asks me if I want to save the number.
Note - it isn't a permanent thing. Many incoming calls DO identify correctly, as the area code has obviously been sent with C-ID.
Does anyone have a solution for this?
Obviously I COULD go thru every contact and manually add another non-area-coded phone number - perhaps under an obscure phonebook entry, like "pager"... but surely this is something that one would expect be handled automatically by the phone... not by duplicating entries as a work-around.
What would happen for business-people who travel internationally - most of their contacts would also include the "+61" (or whichever) country code also.....
Nobody ???
Bumping again ????
Anybody have any clues to this?
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
kawazaki said:
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
Click to expand...
Click to collapse
Thanx mate for your reply.
Sorry took so long.... my phone has been in for warranty repair (unrelated matter to this) for the last 7 weeks, so I haven't logged onto xda in that time !!!
No..... I haven't tried disabling the AC Prefix setting. I will have a look at that and see if it makes any difference.
One additional comment..... I am also having the REVERSE problem.... in that SOME people who ring me on their mobiles, the caller ID is also sending the +61 (Australia) country code in front of their mobile number too.... so again, my phone isn't recognising them as being the "same" number as what is stored in my phonebook ????
Will try the disable thing you mention and report if it works.
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
spinifex74 said:
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
Click to expand...
Click to collapse
Or you could turn off having the phone ask to to add the number to your contacts.
On the US T-Mobile phone it is:
Activate phone screen
Menu
Options
Menu
Network Selection
Advanced tab
Turn off the feature to "Add new phone number to People at end of call"
I'm using the NRG ROM.
Thanks stevedebi.
Sorry - I mite not have been properly clear.
The issue isn't being asked to save a new number.
The issue is.... the phone does not recognise a number - mobile or landline - if there is an area-code or country-code prefixed to the number (or vice versa) with the entry in the phone book.
Eg: ALL my contacts saved in my phone have their mobile numbers WITHOUT the +61 country code.... and ALL landline numbers are saved WITH area-codes.
Now - depending on my contact's phone operators, they sometimes send with, or without, those prefixes in their caller ID's.
Consequently - on those occasions.... my phone does not recognise incoming calls or messages as having come from my contacts, due to the extra numbers at the beginning.
Surely this is a software issue from HTC? I mean, surely the software should be able to query an incoming called ID (either with or without prefixed-codes) with a saved number in the contacts/phonebook (with or without prefixed-codes)... ???
Bumping again ?
Sorry to be repetitive.... still looking for an answer to this ???
Check you registry setting for "HKCU\Control Panel\Phone\CalIidMatch" value=?!?
try to reduce the number for "Value" by 1 and try.
This is for the number of digits your phone will check when comparing incoming numbers with stored names.
Thanx Omar,
Will try that. Question though.... does it check the phone number (by number of digits) in reverse order? ie: setting a particular number will have no effect, if it checks in normal forward order, as it's PREFIXES that are making things wrong.... so the phone needs to ONLY check the LAST 10 digits.... not the first 10. This will eliminate the issue with any country-code added to the front of a number... but will not help with a local area code, as these are dependent on the callers' carrier, if they send the area code in the CID or not
From my experience with my HTC phones, it checks the last digits.
I have number saved with the +974 international code (for Qatar), & when local call come in, they only show the local format (without +974) & the caller ID still recognises the names. Our local numbers are 8 digits, so I have the registry value set at 7 or 8 & it works fine.
Since around the beginning of March I noticed that my phone is showing completely random numbers for all outgoing calls for people that I have in my contacts list. The numbers that it shows are not numbers that I have dialed or received calls from in the past. (If I long-press one of the dialed numbers, the "Call +***-***-****" line displays the correct number), so it seems to be more of an appearance issue. The numbers displayed seem to be consistent for the person I call. I do not remember making any changes around the time this started, but I did notice it about 1 week after it started, so I don't remember exactly.
The correct person is displayed, just a completely random number. When I called Verizon they had never heard of this issue, and the numbers it is displaying are not Verizon numbers. The area codes for the numbers are for completely different parts of the country.
The only dialing related program I have installed is Google Voice, but I am not making these calls using it.
Complete factory reset fixes it, but I don't want that so I did a nandroid restore afterwards. Clearing the recent calls list does not fix the issue.
See attachment for image of what it is doing. I would have linked it but apparently I need 8 more posts to do so.
Droid X2
Verizon
Android 2.3.4 Stock
Rooted: yes
Hi,
I recently purchased sgs2 and updated to ics 4.0.3. All my contact numbers (120 of them) are on sim card and are saved without the country code. On incoming calls the phone displays the full number with the country code ( I am not abroad) but no name. Why it doesnt automatically figure out whose number it is like every other phone I had in the past decade ?
Is there a way of fixing this ?
well i got nearly more than 500 numbers an all synckd wiv google an i do get names no matter if its on sim or phone....
The phone numbers that are saved with the country code work, the others don't, on incoming call only the number is shown not the name.
Sorry if this is the wrong thread to raise this topic, but didnt know whr else I shud put this.
I bought a sprint motorola photon few days back and programmed it to my CDMA operator (Citycell - Bangladesh). Everything is working fine, got EVDO to work etc.
BUT whenever I receive an SMS from ANYONE or any number, the "0" in sender number is shown as character "D". FOR Example if i get an SMS from 01199800570, it will show I received SMS from D11998DD57D > it has nothing to do with that number being in phonebook or anything. any "0" in sender is shown as "D". as a result i cant even reply to these SMS,
FUNNY thing is, when i click on the sms to read it, the ORIGINAL number with "0"s (01199800570) is shown in the last line as [CB# 01199800570]
I have inspected the mmssms.db. I found 2 fields - ADDRESS (which contains all the phone numbers' 0 replaced by D] and CALLBACK_NUMBER [which contains the actual number]
Now I was wondering -
1. IF thr is anyway to fix it by tweaking system settings or something so that sender's number is received correctly [so that ADDRESS field would have correct numbers]
2. OR if it cant be fixed, if there is anyway to force the SMS app (Conversation.apk) to read Sender's address from CALLBACK_NUMBER field instead of ADDRESS field ...
3. OR ATLEAST can someone kind enuf to provide me with a script that would (when run) access the mmssms.db and change all the "D" in values of address column to "0" ?
This is NOT a photon 4g problem - but with most SPRINT cdma phones. The same thing happens with ANY sprint android - when programmed in different country, 0 is replaced with D in received SMS
THEN again, this is a problem in android version < ics. THE ICS phones that are programmed shows sender's number correctly
AGAIN, this is NOT a problem ONLY with my operator, I heard about similar problem in other countries too
Since ICS shows it fine, that means, thr are work arounds in gingerbread too. OR atleast if we can force the SMS apps to read sender's number from CALLBACK_NUMBER, problems are solved.
I know you guys are the best and if u look into it, it would only take a min of ur time to find a solution ... :angel:
anyone ?????
I have the same problem - using an XT800 with the chinese 2.2 rom
most of the time it works ok but it goes haywire on its own without any apparent reason! having a hard time figuring out the sender of each and every message that comes in, some help/ guidance would be very helpful
TIA
I've called one phone number about a month ago. Also somewhere in that period I've changed my phone number but not my phone (LG G3, AOSPE 7.1.2). Problem is that I don't know if I've made that call before changing the number or after. So is there a way to see from which number on that phone I've called somebody?