I have searched for this and found the same question posted in a HD2 Android category, but there were no responses... so asking for myself in here.
I have all my phone numbers listed in my contacts with the preceeding area code, as I often travel outside of the local area and need those area codes included in my contacts numbers..... ie: all my phone numbers are 10 digits in length.
However, there doesn't seem to be a requirement for the area code to be sent, when a caller has Caller-ID enabled. In other words, I receive some calls from contacts in my phone, but if their phone doesn't include the area code in their Caller-ID, then my phone doesn't recognise or identify the number. Consequently, when hanging up from those calls, it constantly asks me if I want to save the number.
Note - it isn't a permanent thing. Many incoming calls DO identify correctly, as the area code has obviously been sent with C-ID.
Does anyone have a solution for this?
Obviously I COULD go thru every contact and manually add another non-area-coded phone number - perhaps under an obscure phonebook entry, like "pager"... but surely this is something that one would expect be handled automatically by the phone... not by duplicating entries as a work-around.
What would happen for business-people who travel internationally - most of their contacts would also include the "+61" (or whichever) country code also.....
Nobody ???
Bumping again ????
Anybody have any clues to this?
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
kawazaki said:
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
Click to expand...
Click to collapse
Thanx mate for your reply.
Sorry took so long.... my phone has been in for warranty repair (unrelated matter to this) for the last 7 weeks, so I haven't logged onto xda in that time !!!
No..... I haven't tried disabling the AC Prefix setting. I will have a look at that and see if it makes any difference.
One additional comment..... I am also having the REVERSE problem.... in that SOME people who ring me on their mobiles, the caller ID is also sending the +61 (Australia) country code in front of their mobile number too.... so again, my phone isn't recognising them as being the "same" number as what is stored in my phonebook ????
Will try the disable thing you mention and report if it works.
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
spinifex74 said:
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
Click to expand...
Click to collapse
Or you could turn off having the phone ask to to add the number to your contacts.
On the US T-Mobile phone it is:
Activate phone screen
Menu
Options
Menu
Network Selection
Advanced tab
Turn off the feature to "Add new phone number to People at end of call"
I'm using the NRG ROM.
Thanks stevedebi.
Sorry - I mite not have been properly clear.
The issue isn't being asked to save a new number.
The issue is.... the phone does not recognise a number - mobile or landline - if there is an area-code or country-code prefixed to the number (or vice versa) with the entry in the phone book.
Eg: ALL my contacts saved in my phone have their mobile numbers WITHOUT the +61 country code.... and ALL landline numbers are saved WITH area-codes.
Now - depending on my contact's phone operators, they sometimes send with, or without, those prefixes in their caller ID's.
Consequently - on those occasions.... my phone does not recognise incoming calls or messages as having come from my contacts, due to the extra numbers at the beginning.
Surely this is a software issue from HTC? I mean, surely the software should be able to query an incoming called ID (either with or without prefixed-codes) with a saved number in the contacts/phonebook (with or without prefixed-codes)... ???
Bumping again ?
Sorry to be repetitive.... still looking for an answer to this ???
Check you registry setting for "HKCU\Control Panel\Phone\CalIidMatch" value=?!?
try to reduce the number for "Value" by 1 and try.
This is for the number of digits your phone will check when comparing incoming numbers with stored names.
Thanx Omar,
Will try that. Question though.... does it check the phone number (by number of digits) in reverse order? ie: setting a particular number will have no effect, if it checks in normal forward order, as it's PREFIXES that are making things wrong.... so the phone needs to ONLY check the LAST 10 digits.... not the first 10. This will eliminate the issue with any country-code added to the front of a number... but will not help with a local area code, as these are dependent on the callers' carrier, if they send the area code in the CID or not
From my experience with my HTC phones, it checks the last digits.
I have number saved with the +974 international code (for Qatar), & when local call come in, they only show the local format (without +974) & the caller ID still recognises the names. Our local numbers are 8 digits, so I have the registry value set at 7 or 8 & it works fine.
Why does it always say "Conditional call forwarding active" when I make any call?
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
I am on Three and I get the same message although my S2 was purchased from O2 then rooted. I have not seen any other reports about this but the message has not bothered me.
I have the same message. Ave tried several hings without success, however since it really does nothing, I am starting to get use to it. But if someone knows how to solve it please let us know
voice mail
Hi guys i have this to but it only started when i activated my voicemail so i think its down to the voicemail
e.g if your on the phone and someone else calls they are placed forward to your voice mail ???
hope this helps
Hey there guys, thanks for the replies so far, glad to hear others are experiencing this annoying problem. I seem to have had this since rooting it, originally T-Mobile though I am 99% it was never "locked" to the network for some reason as I mentioned as I have never had to enter the 00000000 code, which the free ChainFire sim app gave me (seems like it means it is unlocked already???). The guys on the 3 helpline were giving me loads of codes which weren't of any help, and telling me about what options I could fiddle around with, but I had tried all of these to no avail.
Are people also getting the MMI message I mentioned in my original post, whenever they enter # codes in the dialer? It seems to me that both of these problems started at the same time (this error message and the forwarding issue - I am sure they are linked). It means, for example, I probably won't be able to set up a speed dial because of it, nor will I be able to use the "secret codes" as mentioned in the dedicated thread of the same name on this site.
Why is it a problem for some and not for the majority of people, we must have something in common which we have done with our phones which has caused this?
I really hope someone can sort this annoying problem out.
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
BarryH_GEG said:
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
Click to expand...
Click to collapse
Cheers for the reply Barry, yeah I expect it is normal but the thing is I cannot change these settings, my phone won't let me as an error comes up. I know it's not a major problem, just a bit annoying I can't get it to go away. I can't disable those three things, I tried a few times already.
Plus, I constantly get the MMI error message, which I mentioned before, seems a bit of a coincidence how these problems started the same time. I can't enter the majority of "#" codes into the dialer, it always says "USSD Running" or something along those lines and then produces the message like 2 seconds later.
Any ideas? Thanks so far for the advice
I have this problem but unlike all others I cannot make any calls on account of it. When I try to disable call forwarding I get an error msg saying it's not supported by the operator.
There HAS to be a way to fix this. I cannot make any calls or use 3G.
Try this
menu-call-additional setting-select network default...
It work with my sgs2.
On the Galaxy S2 if you go to: settings-call-call settings-call forwarding-voice call forwarding -- You will most likely see that for unanswered or unreachable calls it's not disabled because it forwards it to your voicemail, that's why it says conditional call forwarding is active. If you disable all options you won't get the message but then unanswered calls won't go to voicemail.Hope that helps.
Satish
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Thanks
---------- Post added at 01:41 PM ---------- Previous post was at 01:36 PM ----------
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Just simple take out your sim card and put in some other mobile and cancel all divert and then put it back to ur mobile and check out wat happened ....
s_rajkotia said:
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Click to expand...
Click to collapse
you realise thats almost a year old? Check the dates on threads before you post
ADMIN EDIT: True, but it is a current issue for some people so it's still valid to answer the question.
Doesn't work
My phone drops every call, even with SIM cards from different countries and in all conditions. Thinking this call forwarding might have something to do with it, I tried to deactivate it, first through the settings -- no luck -- than by reformatting the phone. Nothing, cannot get rid of it because it says it is set by the 2 different phone companies I use.
I don't mind the message but when I call someone, I can hear that the call is being sent somewhere, there is a 1st ring, then it rings the other phone. Does this have to do with call forwarding? Can it be interrupting the phone signal and causing the call to drop ?
I have also removed both the Turkcell and Telefonica SIM cards, put them into another unlocked phone and tried to cancel but as soon as I put them back, the message returns and my calls drop.
Im also getting this error when I updated to 4.1.2 and used galaxy s2 sim unlock
Has nothing to do with call forwarding !!!
The Message worked on all AT&T cell phones, since i can remember,. i been using go phones since 06..... and they all had this message when right after the number was just dialed, right after pushing the green phone icon button to dial it , right after entering the number to be dialed on the keypad.
I have found this message on LG Cell Phone 500 CU series... and all my other phones as well...
IT is NOT a CALL FORWARDING ISSUE>.. because i had worked on that for awhile myself...
IT is a Carrier Issue I believe.
and it doesnt happen ever single time , just on certain days . not sure, why... but perhaps, call your carrier and ask them what type of phone they have your phone listed as.
Then tell them the model and make u have. that might change things... Cell phone carriers know how to mess with your phone and break it too...
so if ur having issues with messaging, call forwarding, it just may be the settings the carrier has you listed or down for.
blah.
anyways. yes it is annoying, i just got a new phone, samsung galaxy express. it is starting to happen too on this one. but had it for a few days and it never showed up till about 2 days later.
I thing it is perfectly normal for your device to display this message, I'm central america and mine also says the same thing anytime i make a call "Conditional Call Forwarding Active. However since I have a prepaid or pay as you go plan with my carrier and whenever I have no more credits to make calls i get the message "Calling Barring Enabled". I guess it has something to do with your carriers settings, it doesn't bother me at all though since I'm already used to it so hope that helps.
Enabling call forwarding for real and then disabling it seems to work
I got the same error also on every version of the stock rom (it used to appear occasionally, though) on my Samsung Galaxy S2 (i9100, without g), in that case going into forwarding settings was enough, because the mobile used to read the current configuration from the network and recognized that there was no forwarding active!
I moved to Cyanogen Mod 10.1.3 / Stable and going into forwarding settings was useless... He was updating with the data from the newtwork, all the forwarding options were disabled but the notification message was still there...
I decided to enable it for real by putting a friend number from the same carrier and then disabling it immediately after, and it solved my problem! Hope it helps!
PS: I'm not sure that enabling the call forwarding is free of charge, just double check with your carrier first!
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
anilcsimon said:
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
Click to expand...
Click to collapse
I can't disable the last option (please check the pics)
Sent from my Micromax Canvas 4 A210
Hello,
I also got the similar problem I can't call anyone since 2 days whenever i try to call someone the call drops out and shows the pop up message "Conditional Call Forwarding Active".
I tried to disable call forwarding in call settings but i cant disable the fourth option " Forward Call When Unreachable "
When i try to disable it another pop up message shows up " Unable to deactivate call diverting when phone is Unreachable. Unsupported by operator. "
Please help it is really annoying i can't call anyone.
I use Samsung Galaxy Note 3 Neo
Hello everyone.
To call a number in my city, I need to type just 7 digits, without area/country code.
But, the problem with Optimus One is, if it has a number stored in contacts (with another area code), it ignores my input and always calls a stored number.
Behavior has changed slightly with update 2.2 to 2.2.1 but problem still there.
Just to clarify what I mean: let's say my local area code is (123) and I want to call a local number 999-8877.
There is another number stored: +<country>(456) 9998877
On a 2.2 stock, LG O1 always called +<country>(456) 9998877, doesn't matter what I typed in - 999-8877 or even +<country>(123) 9998877.
On a V10g, so 2.2.1 - it's ok when I type full-format number (but quite boring),
but if I try to call just 9998877 - it still always calls +<country>(456) 9998877.
The same problem in Dialer One, Dialer2, Youlu - probably because they all use standard dialer api.
Not sure if it fixed with update to 2.3, requested LG support about that, but... well, I believe you understand what that means to ask LG support :-D
So, they did not answer at all.
Would appreciate any idea, especially if someone could check and compare 2.2 vs 2.3.
Thanks!