Speaker phone microphone sensitivity - MDA, XDA, 1010 General

Have found that the speaker is fine but the mike does not produce transmission clear or strong.
Are there any soft ware upgrades to adjust or is it regarded as normal for xda.
The mike transmission for the recording function however is ok

Related

Mic issues - pops and lots of noise

audio and video recordings with my compact constantly pop and pick up a lot of noise and occasionally a high pitched sound. Has anyone else ran into this problem? Changing the mic sensitivity from auto to medium helps a little but I'm guessing I need to get it repaired.
rumpingpumping said:
audio and video recordings with my compact constantly pop and pick up a lot of noise and occasionally a high pitched sound. Has anyone else ran into this problem? Changing the mic sensitivity from auto to medium helps a little but I'm guessing I need to get it repaired.
Click to expand...
Click to collapse
I've made a few videos with mine and no problems. I do get an echo on speakerphone but that's it.
i've got this problem when recording calls
I don't have direct experience, but I have read that it is wise to switch to airplane mode to avoid crossover from network connections.

Very low microphone sensitivity

Very low sensitivity of the microphone during a telephone conversation.
If during a conversation I take the phone a little away from my cheek, the interlocutor can hardly hear me. For a normal conversation, you have to hold the phone tightly to your cheek.
If the phone is used as a voice recorder, the sensitivity of the microphone is excellent. Also during the video recording, the microphone records the sound remarkably.
Bad sensitivity only during a telephone conversation.
Tell me, please, what parameter should be changed in mixer_paths.xml to increase the sensitivity of the main microphone?

Microphone issue using loudspeaker

Hello,
When I make calls on loudspeaker the microphone cuts out intermittently and the recepient cannot hear me but I can return to the conversation by simply turning off the loudspeaker, obviously this is not convenient.
I have tried all the software fixes available but no success.
In the diagnostic menu for rcv_dual mic loopback the test does not record anything and similarly fails the interactive mic test in the Samsung online interactive app.
The mic does work for phone to ear calls and video recording.
All of this does not make any sense.
Samsung S10 973F

How to use android both as wireless microphone AND speaker for PC?

I'm going to use this for a Zoom Meeting, since wireless microphones like Rode Wireless Go are out of my budget, I will use my phone and an earphone.
There's WO Mic for microphone, but I want to hear my participants too so I found WifiAudio Server for speaker. They both work through WiFi.
Rather than using both at the same time, is there an app that works for both Mic and Speaker?
Thank you.
Yes, there is an app called AudioRelay which can send both audio as mic and receive audio for speaker. However, the mic is a bit tricky to set up in windows. But when you get it working it's golden.
It has ultra-low latency 16ms for speaker and for mic its even lower

speaker crackling in GSM network for SM-G9910

Hi all! When I use S21 Qualcomm in a GSM network, I get a speaker crackling at the end of interlocutor words, in other types of networks everything is ok. This is fixed by enabling hearing aid support, although it seems that low-pass filter turns on and quality of conversation decreases. There is a crack in the headphones too, but almost imperceptible. Perhaps I need to activate other conversational codecs through the service menu or in some other way?

Categories

Resources