Hi,
Is it possible to put a "Pause" in a stored phone number in XDA?
I frequently use calling cards and I want to store the phone number of the card provider and the PIN number of the card together, so that I dont have to enter the PIN manually.
If it is not possible with the dialing software in XDA, is there any other software available which does this?
Thanks,
AK
Guest
Use a , between numbers - that's a 2s pause.
always wondered
I've seen that " , " used in the pc. Internet connection settings. eg
9,08001234567
9 outside line
, pause for dial tone
Always learning something new here!!
Related
I have searched for this and found the same question posted in a HD2 Android category, but there were no responses... so asking for myself in here.
I have all my phone numbers listed in my contacts with the preceeding area code, as I often travel outside of the local area and need those area codes included in my contacts numbers..... ie: all my phone numbers are 10 digits in length.
However, there doesn't seem to be a requirement for the area code to be sent, when a caller has Caller-ID enabled. In other words, I receive some calls from contacts in my phone, but if their phone doesn't include the area code in their Caller-ID, then my phone doesn't recognise or identify the number. Consequently, when hanging up from those calls, it constantly asks me if I want to save the number.
Note - it isn't a permanent thing. Many incoming calls DO identify correctly, as the area code has obviously been sent with C-ID.
Does anyone have a solution for this?
Obviously I COULD go thru every contact and manually add another non-area-coded phone number - perhaps under an obscure phonebook entry, like "pager"... but surely this is something that one would expect be handled automatically by the phone... not by duplicating entries as a work-around.
What would happen for business-people who travel internationally - most of their contacts would also include the "+61" (or whichever) country code also.....
Nobody ???
Bumping again ????
Anybody have any clues to this?
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
kawazaki said:
Did you try disabling the Area Code Prefix setting in Settings -> Call Settings ?
Click to expand...
Click to collapse
Thanx mate for your reply.
Sorry took so long.... my phone has been in for warranty repair (unrelated matter to this) for the last 7 weeks, so I haven't logged onto xda in that time !!!
No..... I haven't tried disabling the AC Prefix setting. I will have a look at that and see if it makes any difference.
One additional comment..... I am also having the REVERSE problem.... in that SOME people who ring me on their mobiles, the caller ID is also sending the +61 (Australia) country code in front of their mobile number too.... so again, my phone isn't recognising them as being the "same" number as what is stored in my phonebook ????
Will try the disable thing you mention and report if it works.
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
spinifex74 said:
Sorry mate... cannot find the setting you mention.
Could you explain please exactly where it is ?
Click to expand...
Click to collapse
Or you could turn off having the phone ask to to add the number to your contacts.
On the US T-Mobile phone it is:
Activate phone screen
Menu
Options
Menu
Network Selection
Advanced tab
Turn off the feature to "Add new phone number to People at end of call"
I'm using the NRG ROM.
Thanks stevedebi.
Sorry - I mite not have been properly clear.
The issue isn't being asked to save a new number.
The issue is.... the phone does not recognise a number - mobile or landline - if there is an area-code or country-code prefixed to the number (or vice versa) with the entry in the phone book.
Eg: ALL my contacts saved in my phone have their mobile numbers WITHOUT the +61 country code.... and ALL landline numbers are saved WITH area-codes.
Now - depending on my contact's phone operators, they sometimes send with, or without, those prefixes in their caller ID's.
Consequently - on those occasions.... my phone does not recognise incoming calls or messages as having come from my contacts, due to the extra numbers at the beginning.
Surely this is a software issue from HTC? I mean, surely the software should be able to query an incoming called ID (either with or without prefixed-codes) with a saved number in the contacts/phonebook (with or without prefixed-codes)... ???
Bumping again ?
Sorry to be repetitive.... still looking for an answer to this ???
Check you registry setting for "HKCU\Control Panel\Phone\CalIidMatch" value=?!?
try to reduce the number for "Value" by 1 and try.
This is for the number of digits your phone will check when comparing incoming numbers with stored names.
Thanx Omar,
Will try that. Question though.... does it check the phone number (by number of digits) in reverse order? ie: setting a particular number will have no effect, if it checks in normal forward order, as it's PREFIXES that are making things wrong.... so the phone needs to ONLY check the LAST 10 digits.... not the first 10. This will eliminate the issue with any country-code added to the front of a number... but will not help with a local area code, as these are dependent on the callers' carrier, if they send the area code in the CID or not
From my experience with my HTC phones, it checks the last digits.
I have number saved with the +974 international code (for Qatar), & when local call come in, they only show the local format (without +974) & the caller ID still recognises the names. Our local numbers are 8 digits, so I have the registry value set at 7 or 8 & it works fine.
I am having trouble changing the voicemail number on my Galaxy S2. At present pressing the voicemail speeddail does nothing other then prompting me to add my voicemail number and directs me to the settings app.
If I try to change it in Settings > Call settings, I get the error message 'Voice Mail Number change unsuccesful'. But no real reason why it happens and its annoying me greatly as I can't clear my voicemail counter without it and what not >_<
Tried power cycling and what not and neither of it has helped, so has anyone of you gotten any idea as to how I can add it to my phone or fix that stupid error. Any help or advice short of doing a full reset is more then welcome, and I do hope someone might be able to help me....
Thanks in advance.
There is a copy of your voice mailbox number on the sim card that may conflict with what you are trying to do.
Talk to your provider, they can flush your mailbox and allow you to reset the number.
How can they flush my sim card, or am I reading your comment wrong?.
Just for clarifying I changed provider on my phone and I am unsure wether the error happened during that change since I can't remember fiddling with the voicemail bit before the last couple of days and running into that error.
they can flush the settings for your voicemail on their server which will allow you to make changes to your voice mail account.
Well they tried something which advertantly didn't work >_<. But apparently the voicemail number isn't even on my simcard.
They tried even more stuff >_<.
And when I press and hold #1 on my phone it says there isnt a voicemail number on my sim. But trying to change it through settings it still says "Voicemail Number changed unsuccesful"
I have the same problem. Did you find a solution?
At the moment I have limited the issue to being operator dependant. Because I have the issue on one sim from my regular provider, while trying two other providers simcards doesnt cause this error.
Next on list is to try another simcard and then go digging in the phone to see what might be causing it. But I will be pinging you if I find the solution.
dnesdlrow, where are you from and what provider do you use?.
I've got the same problem. I flashed to a custom & now there is no voicemail number on my SIM card.
I called customer service and the gave me a 10 digit number to plug in. They said the number is different for everyone so if anyone else has the same trouble you can simply call your carrier.
You need to put in your carriers specific voice mail number. For example I am on O2 UK and mine is 901.
Use google of contact your carrier for the number.
jamespaulritter said:
I've got the same problem. I flashed to a custom & now there is no voicemail number on my SIM card.
Click to expand...
Click to collapse
Hello,
I had a similar issue. I changed the plan on my phone, and afterward the voicemail didn't work when I did a long press on the #1 button. It kept saying that there was no voicemail number, and when I tried to enter it into the settings manually it kept saying "Voicemail number change unsuccessful."
I called Rogers and they gave me a new voicemail number; I could dial it and set up my voicemail, but when I tried to program it into the dedicated #1 speed dial spot, I still could not change it. I tried copying it to my SIM card and adding it as a contact to select for the speed dial slot, but that didn't work either. I suspected that this new number was conflicting with the SIM card, so I went to Rogers and asked for a new one. Despite some resistance, they gave it a shot, and it worked perfectly thereafter. Just be sure to copy your contacts over to your phone before getting a new SIM!
I hope this solution works for others too!
Cheers and good luck!
Help please ...
I too am trying to set my voicemail for the speed dial "1" key.
while at the keypad screen:-
menu-> call setting -> scroll to the heading "voicemail", option "voicemal service", is set default to "my carrier".
I then choose to change the "voicemail settings" -> "voicemail number", and enter the new voicemail number to dial, press ok .... and this is where the problem is...
When I press OK ... I get the following error "Voicemail number change unsuccessful"
I would like to to have this number changed , as every time manually dial my voicemail number it constantly ask for my password.
Why is this happening, I have purchased this phone outright, it is model type i9300, running Android 4.1.2.
Hopefully this can be an easy fix...?
PS...
This also causes a problem with Australian virtual mobile carriers, like Amaysim, Kogan, Aldi, who use Telstra & Optus as there underlying carriers, and and also will cause issues when travelling abroad, because you will not be able to access your voicemail if the number can not be changed to the full international dialing equivalent..
Also Can't Change the Voicemail number
I'm running a non-rooted, GS3 from VZW. Running 4.1.2.
The current voicemail number is *86 (Verizon's). I'd like to change it because I'm abroad and *86 is not my carrier's voicemail number. Every time I go to Phone, Call Settings, Voicemail Settings, and edit the number to the local one, I get "Error: Voicemail number change unsuccesful."
Any suggestions on how to fix this?
Same problem still
I'm on an S4 Mini with cm11 m6 and habe the same problem with a German T-Mobile card. I can easily dial the number 3311. Why can't I simply assign that to the #1 key?
So I have tried about 10 apps so far that none seem to do what I am looking to accomplish. I am hoping that someone may have a suggestion.
I have a dial in phone system that allows me access to a dial tone. So if want to be able to select a number from my history, contacts or a clickable link and have it prompt which dialer I want to use. If I choose this app it should dial MY number and enter my access code THEN dial the number I was trying to call.
So for example I am trying to call 212-555-1212 and my number is 212-666-1212 it should dial:
212-666-1212[mynumber],,[pause]1234[accesscode],,[pause] 212-555-1212
I have found a few apps that seem to do this, however they have integrated them in such a way where it will only automatically enter into the "Calling card mode" based on dialing rules (Such as area code and country code) there is no way to manually select when to utilize the "calling card mode" and when not to,
I was thinking if there is a Alternative Dialer that supports calling cards, it will add the necessary hooks into the OS and then I can just manually select which app to use to make calls (Either the stock dialer or this new dialer)
Have never looked into this kind of issue, but this seems like it might have the options you are looking for...?
https://play.google.com/store/apps/details?id=com.wifel.geodialerplus
If not, sorry.
Amazfit Pace on standard ROM. When people call, only the number shows, not the name. This seems to be because the app doesn't pick up the contact name if the number has been stored with the international dialling code, which all of mine have. For example, if I store my home number as 020 12345678 it works and shows home when I can, if I store it as +44 20 12345678 then it doesn't show the name, just the number.
Is there any way to address this without removing the country code from all contacts?
No.
The app shows the name to the number that your provider sends to you, exactly that number.
Damn that's annoying, this is pretty much a showstopper for me - one of the main features I like about smartwatches is the ability to screen calls from it, and if possible drop them directly from the phone.
I found a solution to this problem with Amazfit support. If any one else will have the same problem, this was solution for me:
- Go to phone settings, apps and choose Amazfit, then go to Permissions and disable everything, then enable everything.
- Restart phone and watch.
- Caller ID then started to work.
Thanks, but it didn't work. Numbers that match exactly are ok, but if the number is stored with a country code and the person calls from the same company, it doesn't.
I have a mobile sim card that has a full integration with our analog phone network: e.g. I have a mobile phone with a mobile, short internal and long external number combined. My colleagues can call my mobile number, my internal number and other people can call my external number and all calls end up on my mobile phone.
It is also possible to transfer an incoming call to someone else in our company using MMI code. When I receive a phone call I can click de dialer button and manual enter, for example, *345#. When the owner of that number answers I tell him I have a phone call for him and I end the call. The caller is talking to my colleague now.
What I would like to do is getting the option to access my contacts instead of the digital key board, as you can image is manual entering and remembering a few 100 numbers impossible.
Does anywone have an idea?