:?: HI,
I have little prob.
It's very important for me to know how long are my calls in and out.
This info exist in device infos, but I can't reset this infos every month.
Anybody me have tell about "XDA manipulator" for reste this infos.
I've buy a serial-cabel and download the XDA-manipulator...
but I can't find this option.
I hope you con help me.
My Radio Ver. are 4.16
(sorry, my english are very bad but I hope you can understand me)
On the main Manipulator screen, next to 'Call Timers: non zero' there is a 'Reset' button - press that. See the instruction page for what it should look like.
Failing that, you can use the call log timers. Fire up the phone app (press the green off-hook button), hit the 'Call log' button. Select 'Tools, Options...' hey presto, you can reset this whenever you like and you don't have to be at your PC. This doesn't reset the In/Out Call Duration mentioned above.
rgds,
Alex.
Hi Alex,
thank you for your tip.
Now I have the counter reset.
Bye, bye
Joachim
micado
To be perfectly honest, and I'm sure a lot of others feel this too, the XDA's call stats features are sh1te!!
Unlike virtually every other phone on the planet, there are no easy ways to say "this month you have used your phone on outgoing calls for XX mins" etc. The call timers thing is crap cos it's only extremely basic.
I've found a great little program called Funnysnake TodayPhone Pro, and it's much better to use, though I must admit I do still tend to check the xda's inbuilt call log on the fly.
Cheers
A
Related
Does anyone know a way to know if an sms has indeed been sent away? some Sms's just don't arrive and there is no notice to confirm the fact that it was sent off.
Lionel,
Pocket PC 2003 solves this. It displays a little message bubble when a message has been successfully sent.
I have seen that in Pocket PC 2002, if I write and send a message and turn off the display before the message leaves my phone, it will never go. But it will give you the error messge when you go back into your SMS's.
Regards
Keith Burke
Dublin, Ireland
many thanks, so I guess I'll have to get pcc 2003!
greetings,
Lionel
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Hi Ranger,
Can I be sure everything will work all right by upgrading to 4.00.10? I read quite some comments about a series of problems and some people going back to previous versions. Isn't it going to bust up my phone settings in Belgium? Someone wrote not to do any upgrades unless your an expert technician.
2. If I do go on with the upgrade can I just use sd-backup and get my stuff back from Sd-card? Isn't that going to restore my old system?
3. I don't know anything about technics. Most of the options on http://cuba.calyx.nl/~jsummers/ROMkitchen/ sound like Chinese to me.
Sorry for all the dumb questions, but I want to make sure I'm not going to run into trouble.
Hi Ranger,
I decided to run the risk anyway. I can probably do a hard reset and backup if I get into deep trouble.
I went to your link, but as I am a complete beginner at this, I got stuck after 'building the rom now'! I asked for the 'Installer.exe' but couldn't find it on my pc. What shoud I do?
greetings,
Lionel
Ok, first off. Back up your XDA ROM to your SD card. I've never done this, but I'm sure once this is done you can copy it to your desk top.
Secondly, yes there is a possability that it will kill your phone. See http://www.xda-developers.com/forum/viewtopic.php?t=1624
But I have never had a problem, once I stick to my golden rule. Close EVERY PROGRAM that you possibly can while doing the upgrade. And son't touch your computer while it is doing it as well. It's a tiny price to pay. If you're using USB it shouldn't take more than 5 minutes. With Serial cable, I heard it can take upto 20 minutes, maybe more.
As far as downloading it, after you've selected the options in the ROM kitchen [whici belongs to Jeff Summers by the way, not me ] make sure that the bar up the top is still green, NOT RED.
Next, down the bottom there are three options. For yourself, choose the EXE file. After a few seconds, might take upto 30 seconds, up the top of the screen will be a button to down load your file. Just save it somewhere on your computer and run it.
Make sure that your phone is in it's cradle which should be conntected to your computer [or connect the phone to the computer with a serial or usb cable]. Also make sure that the power cable is plugged in.
I think some people have advised taking out your SIM card but i never have.
That should be it.
Let me know either way. If it messes up, just pray that it's after 5% or 10%, so I hear. If so we can try the second option.
Regards
Keith Burke
Dublin, Ireland
One last thing. Take a note of your Network provider settings [GPRS etc...] before you upgrade. They will not be in the new 2003 image.
I forgot when I was doing mine and no longer have my GPRS settings
Hi Keith,
I'm trying it out right away. I have the backup on the sd-card, so that should work fine.
Just be careful with your SD card. I have heard a few reports that it sometimes gets erased in the PDA. Can't remember when or where but if you search the forum you might find it.
Good Luck. It's worth it.
if all you need are sms delivery reports, just click on options when in the compose sms screen and then click on delivery reports, unfortunately you have to do this for every sms as there doesnt seem to be a way to switch it on permanently.
ranger said:
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Click to expand...
Click to collapse
Does this have a radio update ?
Regards
René
Hi,
I've been trying to cook about 20 times since the 1. of August. Tried about everything. Tried all the roms, with and without adding software. Turning off my firewall. Trying all the Rom's. No other programs running.
This is what happens every time:
After selecting the items, I choose the 'install.exe' option and choose 'build rom now'. It starts doing 'something'. I have ADSL and after about 10 seconds the blue bar at the bottom is completed. At the top of the window in the yellow background it keeps saying
'Creating rom... Please be patient
copying rom Files
running mkrom
even after waiting for 30 minutes nothing more happens.
What am I doing wrong?
greetings,
Lionel
Radio Upgrade
@rk
No.
There's no Radio Stack Unit (RSU) Upgrade integrated.
As it depends on the location, where you live, be carefull, which you choose.
For me living in (good ol') Europe the RSU 4.21.00 from O2 UK webside is working.
My native language is Greek and naturally I send Greek sms.
The only problem is that XDA sends them using Unicode character set meaning that over 70 character messages will be splitted.
Does anybody know of any solution on this issue?
I have an O2 payg sim card, even though I ask for delivery reports on sms each time I dont get them, reason being the remaining balance comes in as an sms which cancels the process somehow. Has anybody got a solution to this?
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
ukneil said:
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
Click to expand...
Click to collapse
Thank you very much, that worked a treat, I was told by somebody to put that *0# before the fone number, no wonder it didnt work, thanks again.
Hello all,
I'm new here, have read lots of the information available, but came here looking for an answer that I haven't found yet.
Situation is the following.
I got this Qtek2020 (or XDA II) from my dad who used it for his work. The reason he stopped using it is because the "phone" function itself is kind off acting weird.
Sometimes it is just nog possible to get into phone mode, neither of the two methods make te device display the dial pad...
- hitting the green button
- going Start-> phone
(It's kind off like a non responding program in windows when you want to execute it)
To make things clear, the phone works fine if we go to contacts and then choose the option to call the contact.
The question is, does this problem seem familiar and is there a way to fix it by for example putting a new rom on the device?
Any help or input about this is greatly appreciated.
Thanks in advance
I think the HARD RESET should help . After a long... long work configuration data and other settings going to be ... melted . If U don't store on devise impotrant data just remove the battery for about 20 mins .
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
rob_milton said:
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
Click to expand...
Click to collapse
Hey Since you're new I'll provide a link. It should be located somwhere on this page in this thread. BT Voice Command something or other
http://forum.xda-developers.com/showthread.php?t=283412&page=32
Give a man a fish and he eats for a day. BUT!!! Give a man a fishing pole and he eats for the rest of his life.
Check out this wiki. You can find just about everything you are looking for here.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
When you get everything all hooked up join us in the Jawbone thread. I'd like to hear your experience with it. I'm gonna test mine today with the sunroof back and drivers window down doin 80+...see if they can hear me now!
X
p.s. IF you have issues getting it to work there are some great tips in that entire thread. It's great reading...especially when you get it to work in the end. BOO YA!
Xultar,
Thank you for the response...
I am finding it interesting to read through all the information on this site. I had already spent a lot of time in the WIKI that you referenced.
I guess I'm just dense, but I still can't find the file 0.9f (.cab ?). The thread you referenced says download it. But it doesn't say where? I can't seem to find it anywhere on this site or by Googling...
Can you point me in the right direction?
Thanks,
Rob
Ok... I finally found the 0.9f cab...
The instructions say to 'run' it. I don't know how to 'run' the cab file?? I unzipped the zip file I downloaded. What do I do with the cab file?
Thanks,
Rob
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
rob_milton said:
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
Click to expand...
Click to collapse
There should be an icon in your program menu for BT Voice command config
enable it I sent my VC duration to 20. In the bottom left corner it should say version 0.0f
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
rob_milton said:
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
Click to expand...
Click to collapse
Actually no headset can handle wind noise very well.
About MS VC 16 and 0.9f...A hard reset may be necessary but if you want it to work...and it does a hard reset is worth it. For what it is worth 0.9f works in general with all BT headsets.
Good luck
X
I can say that it works great with the SE DS970
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
xborfi said:
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
Click to expand...
Click to collapse
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
dioxda2 said:
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
Click to expand...
Click to collapse
thanks for your attention. I am now downloading it and let you know the results. thanks
Kornad 3.1 faild
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
xborfi said:
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
Click to expand...
Click to collapse
I am currently using this 3.1, keypad tones working fine (do you mean this? ).... ( Mine is a G3)
1. Is your speaker works fine? ( like playing music...)
2. did you try a hard reset?
3. optional flash with the lazy tool,
4.
yes, I did all steps except 3. Ill upgrade with that and inform you the results.
BTW please press around 50+ time on keypad to here keypad tones. they suddenly stop! my device is G4. I know that G3 sre better than G4 in wm6&6.1
thanks
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
paul c said:
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
Click to expand...
Click to collapse
Thanks for sharing...
i'm having the same problems sometimes. it happens mainly after changing the volume via the up/down switch from off to vibrate or back to certain volume.
the solution is the same as in the first post is mentioned. go to sounds & notifications and there to incoming textmessage. play the ringtone. sometimes a second time doing that is necessary.
but as im testing many roms as well, it happens very often on wm6.1, not so often in wm6.
before i forget to mention, i own a G4 Xda Neo.
//edit: another problem i had once was after using Shadow Vista "My Edition"(wm6.1) from with the ring volume-tweak. during call i rised the volume a little bit and then suddenly my speaker stopped working. even a softreset hadnt solved that problem, then i switched often the volume and after MANY attemps i managed somehow to get it working again. i was kinda shocked
greets
guro
PS: somebody has also the problem when recieving messages and press a key to early that the orange flashled doesn't went off?
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
xborfi said:
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
Click to expand...
Click to collapse
Try a different WM6.1 ROM!
i tried lots of stuff to solve this issue...no luck at all, after flushing the stupid Thai rom, i lost the sound....still trying
well, I tried almost 90% of roms here. all wm 6.1 are having this bug . I found PDAviet 4.0.0.0.6 a bit better than other, the sound bug happens less in this rom how ever it is still there.
oh! i found this here!
http://forum.xda-developers.com/showthread.php?t=371926
it looks as if this problem is with all roms, I think there must be a way to fix it on this biggest forum. still searching and reading an trying roms!!
hey guys,
since I moved to wm6 I was getting this bug, specialy with the sms notification.
but there was one rom which I did'nt have this problem if I kept the default rigntones. it was "Prophet_S4V.19701.01_F".
i'm flashing Prophet_S4V.19213.01_C, hoping it is that good too. altough I had the micro based on the s4v.19213 and and it was driving me crazy with this bug, I couldn't make it ring...
looking forward to help.
cya
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
xborfi said:
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
Click to expand...
Click to collapse
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
dioxda2 said:
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
Click to expand...
Click to collapse
yes, i do hard reset by pressing comm + cam + soft > send button . each rom i try i first open key pad and press 30+ on it and i sadly see sound dissapear! it looks as if prophet is not compatible with wm6!
I am now back to the wm5 and eagerly waiting to see a solution or patch from the great developers here!
well. no fix yet pals?
i had some problem too and what I had to do is...
When ever I hold the pda, I will press the volume up button even in lock mode and if there's no any sound, that mean the sound already disappeared, I had to soft reset... I had this problem at least once in 2 days....
Hope there'll be a fix for this issue sooner...
Hey all,
I wonder if anyone has the same problem or knows a solution to this.
After a certain amount of usage whenever I press the end call hardware button on my phone it gives out a very loud DTMF beep - anytime, not only when ending calls. It's really irritating.
Usually a soft-reset solves the thing, but is there a way to disable these beeps in the registry maybe?
I'm using Bikertibi's WM6.5 28011 build on a G4 model.
i have the same problem... for a wile
i using bikertibi rom on a g4 model
i dont know any solution
same. bikertibi`s roms, after a some time had this problem.
Friends,
Did you tried the one available in Phone Settings?...
Start -> Settings -> Personal -> Phone...
There in the "Phone" tab -> Keypad: Off.
That did it, thanks!
same
and if u press some key many time like "33333..." more than one line,phone will come to silent!
bug!
now can solve just by set keypad sound off.
The same with me @ 23121 by bikertibi.
Thank for solution, the sound goes pretty annoying.
Same Problem
Same issue. In every ROM that I tried happens after a while. I just hard reset to solve.
mahesh1310 said:
Friends,
Did you tried the one available in Phone Settings?...
Start -> Settings -> Personal -> Phone...
There in the "Phone" tab -> Keypad: Off.
Click to expand...
Click to collapse
thnx dude
this work for me