Does anyone know if there is a hidden menu on the XDA that is similar to the Network Monitor that can be enabled on Nokia Phones?
For exampl on Nokia phones when activated you can:
Carrier number
MS RX Level in DBM
Received signal quality
MS TX power level
C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
RTL (Radio link timeout).
Timeslot
Indication of the transmitter status
Information on the Network parameters.
TMSI (Temporary Mobile Subscriber Identity).
Cell identification (Cell ID, Number of cells being used).
MCC (Mobile country code)
MCN (Mobile network code)
LAC (Location area code)
Ciphering (On/Off)
Hopping (On/Off)
DTX (On/Off)
Discard cell barred information.
We have been looking into this. All we know is that this is not low-hangiong fruit on the XDA. The information seems to be available inside the modem chipset only, and it seems like it's not communicated to the PDA part, or we haven't found the way to ask for it yet.
Either way: this frustrates us more than it could possibly frustrate any of you, so stay tuned. (But don't hold your breath...)
thanks for letting me know
Related
I have a Siemens SX56 using AT&T Wireless as a carrier.
The phone is running the following:
ROM Verison: 3.14.03 ENG
ROM Date: 09/27/02
Radio Version: 6.12
Protocol Version: 324e4
My question is:
I would like to connect to a traditional ISP. I have talked to AT&T and they said when I go to the internet, I have to connect using their GPRS network. They said that if I used another ISP I would not have to pay them to use the internet. DUH! this is what I want to do. Any advice would be appreciated...
Thanks!!!
Bob
You can connect to the Internet using GPRS. This, in essence, would make AT&T your Internet Provider. You can choose to get your mail at your existing provider (but you must use AT&T's server for outbound mail). Other than that, your 'normal' ISP has nothing to do with you once you connect through AT&T using GPRS.
You could, theoretically, also connect using the GSM as an ordinary modem, by dialing your old ISP, making what's called a 'GSM data call'. This would however limit throughput to roughly 9600 bps, and it would not have the nice 'always on' property of GPRS. It would be cheaper per bit (in most cases) for large downloads though. Go figure.
i want to make a gsm data call
I do want to make a GSM data call. at&t charges an arm and a leg for data access, that usimg my regular ISP even at 9600 baud would be great.
when I try to set up anything other than GPRS, it says "there is no answer". I called siemens and the said at&t disabled anything other than GPRS.
what I want to know is can I enable that ability which I know the phone can do?
Thanks
Bob
GSM data calls can be made from most phones, but AT&T may have disabled this call type for anyone but those paying for a 'data subscription'. With most providers a data subscription just means you get a seperate phone number in order to be able to receive incoming calls from analogue modems.
GSM providers are weird. For instance O2 in The Netherlands blocks fax calls for some unknown reason, but passes GSM data calls.
I must not be clear...
OK... I must not be clear, so I will try to be more clear in my question.
First a little background:
I have AT&T wireless with a data subscription. My current subscription is for 8 Megabytes per month. I would like to use the web, but with only an 8 Megabyte limit (which is AT&T's highest data level subscription that you can buy) I can not do much on the Internet.
I know that a GSM data call is slower. I know that it is not always on like GPRS. Because of the data limit of my current AT&T data subscription I want to make a data call from my phone to my ISP.
I have setup a ISP connection profile in the connections area on the phone. When I dial the ISP the phone responds with a message that says "the number you dialed is not answering" this is a text based message, not a voice message. I know the phone is answering because I can call it from my home pc or just dial it from the cell phone and it answers. I was told by siemens that AT&T turned the GSM Data portion of the phone off. I am hoping they turned it off with software and its a setting or something I can change in the registry to enable it again.
So in summary:
I do pay for a GPRS data subscription ($25.00 for 8 Megabytes / month)
I would really like to also use GSM data as an option for getting to the Internet when I do not want to use up my 8 Megabyte limit on GPRS.
I really have appreciated your comments and your help. I hope I am being more clear in my question now.
Thanks,
Bob
I'll try to be more clear as well then...
Try calling your provider and see whether they support GSM data calls from 'normal' subscriptions. And with normal subscription, I'm not talking about whether or not the subscription has GPRS, but I mean any subscription that doesn't get you a special phone number for incoming data calls.
There's plenty of providers that do not provide normal data calls, even to subscribers that pay extra to get GPRS. Most of this practice did end when WAP was believed to become big, but some may have limited data calls to their own WAP access numbers.
Should your provider still offer separate numbers for analogue and ISDN, try calling both types to see what happens, and do play around with both call types (analogue & ISDN) from your XDA. (Under 'Settings' / 'Connections' / 'CSD Line Type' in modern ROMs)
Good Luck...
Similar issues
I am trying to do the same thing with my 02 XDA, and i get the same message saying it is not answering. However, i can dial my ISP using a GSM connection, as i have done this using my nokia 7650 connected via IRDA to my PC, and useing it as a modem. However i cannot get the same connection to work using my XDA. Very strange, so if anyone can help.
I have recently purchased a viewpad 7. I have also enabled 3G services from my operator. Can somebody help me in the following:-
(a) How to start a video call?
(b) What will be the indication for 3G services running on the pad?
(c) Can someone show me a display of the screen with 3G services enabled?
What is your mobile operator (and country, if applicable) since we have users around the globe on this sub-forum?
Based in US, I've used a prepaid 3G Sim from AT&T (also, tested my China Mobile HK/China dual phone # prepaid Sim) and getting E(dge) or 2G+ voice/data services only along with much faster secured wifi (20GB broadband) - but I'm setup to use Google Voice for all voice calls.
Regardless, the upper right portion of the status bar (on top of the display) should show the "H" or "3G" symbol when data is active.
Try by going to Settings, Wireless & network settings and check your Mobile networks - check that Data is enabled (including roaming, if applicable) and that Network Mode is configured properly, also APN is set for MMS per your mobile operator specifications, etc. etc.
I'm doubtfull about its ability to easily take/make video calls over mobile network (possible & probably easier to configure over wifi - with the proper software as bandwidth needed could be part of the issues) - however, I could be mistaken & not fully up-to-date on this.
I am using BSNL network India. In the mobile network settings on enabling data, the download E symbol shows up on the top right with arrow marks. I am able to load/upload data but no video calls. The review says that video calls are possible with the viewpad 7. But how please help.....
view this thread i have just run into the same problem
http://forum.xda-developers.com/showthread.php?t=1267297
and there is the solution, if you have a different network, pm me ill work out the solution for you
note im with o2 in the uk, as for your other questions, to indicate you have a 3g signal, there will be a 3g icon next to the signal bar, in my case its a H as im connected to a HSDPA signal.
I put my automatically: S
mahua402 said:
I have recently purchased a viewpad 7. I have also enabled 3G services from my operator. Can somebody help me in the following:-
(a) How to start a video call?
(b) What will be the indication for 3G services running on the pad?
(c) Can someone show me a display of the screen with 3G services enabled?
Click to expand...
Click to collapse
DOes it mean, your VP7 can not connect to internet via mobile/SIM module? I had the same problem with the latest official ROM from VS. I Had to install FM6-3350-0-1008-A01.nb0 which I have to find on this forum. Unfortunately I have lost Czech localization.
Hello Forum!
I want to limit my phones data traffic to go over one specific network when I am roaming.
I noticed that after you loose signal of the chosen network for some seconds, it doesn't just say there is no network - it switches over to another, stronger network.
Reason for all this is the 3 LikeHome roaming tariff which afaik we more or less exclusively enjoy here in Austria.
Data Traffic, Calls, etc are handled as if you were in Austria - you just have to stay in the '3 LikeHome' network.
Is this doable?
thx
Phone: Samsung S3
Version: 4.0.4
Hi
Is there any chance within tasker to determine the type of network the phone is currently using (Egde/UMTS/4G...)? The variable %CELLSIG provides the current signal strength but obviously no information about the type of network which of course makes a big difference. I would like to log the signal strength while travailing by train to find out which provider is best in that area.
This posting provides information about how to determine the network type on rooted phones:
http://forum.xda-developers.com/showthread.php?t=2291621
Thanks
Steph
I installed 15 different apps, still no luck.
I need to know which is the strongest operator in my home... but without subscribing ALL operators just for testing!
I can't find an app capable of mapping all operators.
BUT:
1) I'm sure my phone can see all available operators: I can see them when selecting "manual operator selection" option.
2) I'm also sure my phone can see the signal strength of at least one operator: when I have no coverage from mine, I can anyway see the signal strength icon changing.
3) I'm sure any app on my non-rooted phone can read MNC code of the closest base station, and MNC identifies the operator.
Is there any app capable of collecting all these data and thus allowing me to build MY OWN map (not just a downloaded map) of operators coverage for MY specific phone?
I don't know if 1) and 2) info are available to apps, but even an app just using info 3) would be very useful to me.