Hi! dudes,
Could anyone help me out of this, my xda's infrared has ceased to function properly Every time I try to beam info with other devices, its system detects my mobile device being connected to the desktop even when I am completely on the move. I also have tried hard resets several times but they don't do much with my infrared connectivity. Has anyone had any solutions to this, please kindly let me know. Thank you guys.
Ken
Any comments, anyone??? :?
IR Problem
I have the same problem here.
Did you get any solution yet?
Try to burn new rom from ROM Kitchen.
Ken_xda said:
Hi! dudes,
Could anyone help me out of this, my xda's infrared has ceased to function properly Every time I try to beam info with other devices, its system detects my mobile device being connected to the desktop even when I am completely on the move. I also have tried hard resets several times but they don't do much with my infrared connectivity. Has anyone had any solutions to this, please kindly let me know. Thank you guys.
Ken
Click to expand...
Click to collapse
I had a similar problem when I cooked a rom with "foldable keyboard" option ticked. I did not know then, but I just flashed the device with original rom upgrade and it started functioning. Somebody later wrote to my query that if any other application using the same com port (com3) is active, it disables the infrared). check if there is any such application running.
That folding keyboard also snatched my com 1 gps port as well, even though I disabled infrared beams, once I cooked a rom with no folding keyboard it gave back the com port and gps was fine.
Ir working again
Hello,
I just uninstalled my foldable keyboard, and Ir was working again
Sometimes things can be simple
Ian
Related
After upgrading to ROMKitchen 3.17, the infrared port has stopped working. It does not send or receive anything. Why could it happen? It was working very well before upgrading. If any application that involves IR, that is beam file, ActiveSync by IR causes the XDA to hang. IR Receive gives message "Unable to establish an infrared connection while mobile device is connected to the desktop"
"Unable to establish an infrared connection while mobile device is connected to the desktop"
Click to expand...
Click to collapse
Dear,
I had a similar problem once and for long until I realized that some of my other softwares were interfering with the IR Port. If you have any software that requires all-time active connectivity status of any kind (i.e. keyboard driver), disable it before using the infrared.
HTH
Dear Ken,
I guess that is where I went wrong! There was a foldable keyboard software that was creating problem!
Thanks
I have similar problem with AT&T PPC2002 (XDA developers Special Edition ROM v1.2). The phone was bought with this ROM, so I didn’t try with other versions.
When I run ‘infrared receive’ application or try to beam any file my phone simply hung till I soft-reset it. It may be the conflict with other programs but I not sure. How to check who else uses IRDA and how to remove those programs/conflicts?
Help please and thanks in advance
Please tell me how did you end the problem because it seems that i have the same thing with my XDA II
I wish I could end up with this problem... but I still not. It does not vitally critical since I don’t need IRDA functionality so far. But having feature (IRDA) and knowing it does not work for unknown reason driving me mad. PROBLEM STILL EXISTS AND I HAVE NO CLUE WHAT TO DO.
This is the best Universal Remote software. I installed this on my Titan, and was able to control two of my TVs, a Projector, and a CELING FAN, lol....it can do everything, this truly is "universal"
(see attached cab file)
i'll test this tonight to see if it works
installed
I just installed it. I don't see an option for what you mentioned about pointing your remote at it to capture the IR (code).
Though I did go downstairs at work and point the thing at the Panasonic TV and go through the 30 codes trying hopelessly to get it to work.
Do you need to turn on / enable IR, or is it just naturally enabled each time you hit a "Power" or "Channel Change" Button?
Otherwise pretty cool...though it'd be nice to switch the screen around with the IR receiver being on the bottom instead of the top.
This one actually works with the Titan's IR hardware? If so, I've been waiting so long for something like this! None of the other universal IR programs have worked. Trying now!
Let us know how it works - I am hoping it will replace my Directv remote!!
Well, I just tried it on a Sony TV with all 24 associated IR codes for Sony, and no dice. I had beam enabled, but I am not totally sure that IR even works on the ROM I'm using (PPCKitchen build based on 19588). Can anyone else confirm that this works, and if so what ROM are you using?
bedoig said:
Well, I just tried it on a Sony TV with all 24 associated IR codes for Sony, and no dice. I had beam enabled, but I am not totally sure that IR even works on the ROM I'm using (PPCKitchen build based on 19588). Can anyone else confirm that this works, and if so what ROM are you using?
Click to expand...
Click to collapse
I just tried it, with little hope of it actually working, on DCD3.2.0 ROM and couldn't get my Sony TV to work with any of the 24 codes. I too thought it might be the ROM, so I reflashed with the latest official "leaked" ROM and couldn't get it to work with that one either.
This is the first time I've seen this program actually work on a PPC since I owned my ipaq 5450.
This software is supposedly only available when it is distrubuted preinstalled by the OEM, and the only WM devices I've ever seen with it were HP/Compaq models.
This was the one program I truly missed when I left HP PDA's behind.
I hope someone figures out how to get it to work. I'm mildly surprised the program even runs on our titans.
nosmohtac said:
I just tried it, with little hope of it actually working, on DCD3.2.0 ROM and couldn't get my Sony TV to work with any of the 24 codes. I too thought it might be the ROM, so I reflashed with the latest official "leaked" ROM and couldn't get it to work with that one either.
This is the first time I've seen this program actually work on a PPC since I owned my ipaq 5450.
This software is supposedly only available when it is distrubuted preinstalled by the OEM, and the only WM devices I've ever seen with it were HP/Compaq models.
This was the one program I truly missed when I left HP PDA's behind.
I hope someone figures out how to get it to work. I'm mildly surprised the program even runs on our titans.
Click to expand...
Click to collapse
Just to be sure...you had beam enabled right? From his sig, it looks like Crobs is running DCD 3.2.0 as well. I was really hoping this would work. The Titan's placement of the IR port on the bottom (vs the side) would have made it an ideal platform for this kind of program.
crobs808 said:
This is the best Universal Remote software. I installed this on my Titan, and was able to control two of my TVs, a Projector, and a CELING FAN, lol....it can do everything, this truly is "universal"
(see attached cab file)
Click to expand...
Click to collapse
What settings do you have in your phone in order for this to work? (Beam should be on?)
Also, what ROM are you using?
Traketo said:
What settings do you have in your phone in order for this to work? (Beam should be on?)
Also, what ROM are you using?
Click to expand...
Click to collapse
How do you enable beam? I don't have it listed in Comm Manager
scrawnyb said:
How do you enable beam? I don't have it listed in Comm Manager
Click to expand...
Click to collapse
Ditto... Is there a setting that I'm forgetting about? The only thing that I could find on the stock ROM or on DCD 3.2.0 was in settings > Connections > Beam - with a checkbox for "Receive all incoming beams".
nosmohtac said:
Ditto... Is there a setting that I'm forgetting about? The only thing that I could find on the stock ROM or on DCD 3.2.0 was in settings > Connections > Beam - with a checkbox for "Receive all incoming beams".
Click to expand...
Click to collapse
Ya, that's it. Doesn't seem to be working for anyone. Care to elaborate Crobs?
Weird guys...I was actually able to get this to work with my Hitachi tv and RCA television. One is a huge big screen and one is a small one with a DVD player built in. That's all I know to tell you since I am not a devloper or coder myself, so I dont knwo why mine is or is not working...I do not have any other special software installed other than TomTom 7.450
FYI - I am running DCD ROM 3.2.0 with Radio 3.42.30
have you tried with any other electronics and seen if they worked. I cant get it to work either and i dont think my beam is sending anything out.
Fix IR
Check this reg key and see if it is as below:
Changed the following in the Registry:
[Mobile Device\HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
Disablepowermanagement=1
IntIR=1
Port=1
does the nevo software work for you serfboreds? I changed the disable....to 1, but it still doesnt turn on the tv or dvd.
i know that the beam is working since i was able to send a file through it to my Palm
serfboreds said:
Check this reg key and see if it is as below:
Changed the following in the Registry:
[Mobile Device\HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
Disablepowermanagement=1
IntIR=1
Port=1
Click to expand...
Click to collapse
Checked those entries. Disablepowermanagement was 0, changed to 1. Still nothing for me either.
dunebuggydude11 said:
does the nevo software work for you serfboreds? I changed the disable....to 1, but it still doesnt turn on the tv or dvd.
Click to expand...
Click to collapse
No, haven't had the time to try. Just trying to help get beam going for you. Seems dunebuggydude got beam working but no software. May not be compatible with titan.
Guys, I haven't tried it yet, but for all those unsuccesful attempts: how close to TV were you? I believe Titan has pretty weak IR and you need to be like right next to TV for this to work.
I'm thinking in the possibility of use an Android tablet to develop an HMI interface to control electrical devices.
One of the problems it's that the devices could be long periods of time stored or simply off, so it will be needed to turn off the tablet via software when the device is Off.
The question if it's possible via an Android App/custom ROM/utilizing root/etc to force the Android device turn on when the charger it's connected?, an not enter with the typical battery charging screen.
Hopping that somebody can know the answer because I couldn't find something in the forums right now.
Well I am not sure but I think that you can find a custom rom that has that feature preloaded and you can develop on that platform.
Somebody known of an ROM that could have that funtionality, or somebody that develop an ROM if it could be possible to add that in android or the charging screen can't be hacked?
For the sake of completion, I have found that it's possible turn on an android device using adb, with the command:
Code:
./adb reboot
But that will imply to build the adb app in a microcontroller connected to the USB port. Certanly it will be more easy if it could be activated in a ROM but it may be impossible to do, somebody has information on that?
felipec84 said:
Somebody known of an ROM that could have that funtionality, or somebody that develop an ROM if it could be possible to add that in android or the charging screen can't be hacked?
For the sake of completion, I have found that it's possible turn on an android device using adb, with the command:
Code:
./adb reboot
But that will imply to build the adb app in a microcontroller connected to the USB port. Certanly it will be more easy if it could be activated in a ROM but it may be impossible to do, somebody has information on that?
Click to expand...
Click to collapse
I have the same issue as the OP i need my tablet to come on when power is connected. (galaxy tab 2 (7) ) does anyone have any other suggestions?
I have been looking for a solution for very long. There still is no one who has guaranteed to invest time in this project. I have, however, come across a few android models which have same or similar features built in their ROM.
For example: Sony Ericsson X10 Mini does exactly what we are looking for. It turns on android OS when the charger is connected.
There are other generic android devices which perform a similar task. There is a feature in such devices namely "Schedule On/Off" which turns the phone on/off at a pre defined time of the day. A handful of devices that I have come across are Spice MI 270 and Micromax A60. There are a lot many such devices available in the market.
Do not forget to post the solution when u get one.
+1
ajparag said:
I have been looking for a solution for very long. There still is no one who has guaranteed to invest time in this project. I have, however, come across a few android models which have same or similar features built in their ROM.
For example: Sony Ericsson X10 Mini does exactly what we are looking for. It turns on android OS when the charger is connected.
There are other generic android devices which perform a similar task. There is a feature in such devices namely "Schedule On/Off" which turns the phone on/off at a pre defined time of the day. A handful of devices that I have come across are Spice MI 270 and Micromax A60. There are a lot many such devices available in the market.
Do not forget to post the solution when u get one.
Click to expand...
Click to collapse
Looking for a solution as well
Using old phone as ODB2 Interface for my car .....
tried messing with init. no luck
What is the name and location of the files that display that big battery? We might be able to rteplace that by a reboot shelscript and ... presto
TyLLy_4 said:
Looking for a solution as well
Using old phone as ODB2 Interface for my car .....
tried messing with init. no luck
What is the name and location of the files that display that big battery? We might be able to rteplace that by a reboot shelscript and ... presto
Click to expand...
Click to collapse
there was an app made by chainfire called Nomoarpowah that would boot the tablet when charging and you could touch the screen to turn on the device, i sent him a few messages over the last couple of months but no reply and it looks like he's stopped development on it.
so there is a way, i don't have the knowledge to do it myself though.
In Android 4.2 the feature is already there
Press Thanks On Getting Helped
i've installed cynogen mod with 4.2 but i can't find the feature, could you give a little more info?
tab2rx8 said:
i've installed cynogen mod with 4.2 but i can't find the feature, could you give a little more info?
Click to expand...
Click to collapse
Bump for this.
Note 2 > Deodexed Stock ROM > Tapatalk 2
Also very, very, very interested in this feature for my Galaxy Tab 2 (P3100). Was possible to do a nasty hack with playlpm on my Galaxy Tab 1 but doesn't seem to work the same way on SGT2 with CM10.1.2
turn on Andriod when charger it's connected
Hi did you guys ever find a solution? If so can you please post here.......
My LG optimus G Pro E988 auto turn on when charging / connect to power source (laptop)
And also, it wont off when charging. Just keep turned on automatically when I turned it off.
Hi All,
I am looking for bluetooth support. I think the rel, evant feature is called MAP (Message Application Program).
I am such a noob, but I have a very interesting problem that i hope will wet the appetite of the very smart people here...If this is the wrong place to post this thread, please redirect me.
I have a 2013 Mazda 3 that is equipped with a bluetooth system. It has some kind of interface (not even sure what to call it), that will download text messages from compatible phones. My phone is compatible, it is an LG Spectrum. When I first sync'd it with the car, it did download the messages as designed. Then, for some reason, it just stopped downloading them. The car gives a message "download failed. Try again later". I feel pretty strongly that this is a phone issue, not a car issue.
I'm on android system 4.0.4 (ICS, I think?) I've tried unpairing the phone and deleting the profile on both the car and the phone, then pulling the battery out of the phone while it was turned on. Same results.
Can anybody think of any reason this would have stopped working? Any suggestions on what I might try next? During the time the phone stopped downloading messages, I think there was an update to the phone. If that is the problem is there a way to un-update it?
Thank you for any assistance you may be able to offer.
Tom
tvn300 said:
Hi All,
I am looking for bluetooth support. I think the rel, evant feature is called MAP (Message Application Program).
I am such a noob, but I have a very interesting problem that i hope will wet the appetite of the very smart people here...If this is the wrong place to post this thread, please redirect me.
I have a 2013 Mazda 3 that is equipped with a bluetooth system. It has some kind of interface (not even sure what to call it), that will download text messages from compatible phones. My phone is compatible, it is an LG Spectrum. When I first sync'd it with the car, it did download the messages as designed. Then, for some reason, it just stopped downloading them. The car gives a message "download failed. Try again later". I feel pretty strongly that this is a phone issue, not a car issue.
I'm on android system 4.0.4 (ICS, I think?) I've tried unpairing the phone and deleting the profile on both the car and the phone, then pulling the battery out of the phone while it was turned on. Same results.
Can anybody think of any reason this would have stopped working? Any suggestions on what I might try next? During the time the phone stopped downloading messages, I think there was an update to the phone. If that is the problem is there a way to un-update it?
Thank you for any assistance you may be able to offer.
Tom
Click to expand...
Click to collapse
I have the same issue I posted just a few moments ago on the T mobile Note 3 Q and A section.
Dear forum/friends
I have the subject Android TV box and I was very pleased since yesterday.
I installed a Netflix APK , and though it start working flawlessly, after I turn the box off, the signal could not be detected .
I tried various TV's, and different HDMI cables but nothing.
It seems that it starts properly but can not be recognized from the tv.
I tried also to connect it through a PC but nothing again.
I am not sure that is related to The APK installation but it started behave like this right after I tried this program.
I suspect that the resolution has changed and this is the reason for the disfunction.
Is there any way to set it to the factory settings.
Your assistance is highly appreciated
Thanks in advance.
I still have not found a solution , neither a helpful advice has arrived.
Does anyone know if there's a way to manually reset/reboot the device? Let's say through hidden features in the remote control or any button from the device itself.
Any idea is more than welcome.
Thanks again
Sent from my Redmi Note 3 using Tapatalk