This is the best Universal Remote software. I installed this on my Titan, and was able to control two of my TVs, a Projector, and a CELING FAN, lol....it can do everything, this truly is "universal"
(see attached cab file)
i'll test this tonight to see if it works
installed
I just installed it. I don't see an option for what you mentioned about pointing your remote at it to capture the IR (code).
Though I did go downstairs at work and point the thing at the Panasonic TV and go through the 30 codes trying hopelessly to get it to work.
Do you need to turn on / enable IR, or is it just naturally enabled each time you hit a "Power" or "Channel Change" Button?
Otherwise pretty cool...though it'd be nice to switch the screen around with the IR receiver being on the bottom instead of the top.
This one actually works with the Titan's IR hardware? If so, I've been waiting so long for something like this! None of the other universal IR programs have worked. Trying now!
Let us know how it works - I am hoping it will replace my Directv remote!!
Well, I just tried it on a Sony TV with all 24 associated IR codes for Sony, and no dice. I had beam enabled, but I am not totally sure that IR even works on the ROM I'm using (PPCKitchen build based on 19588). Can anyone else confirm that this works, and if so what ROM are you using?
bedoig said:
Well, I just tried it on a Sony TV with all 24 associated IR codes for Sony, and no dice. I had beam enabled, but I am not totally sure that IR even works on the ROM I'm using (PPCKitchen build based on 19588). Can anyone else confirm that this works, and if so what ROM are you using?
Click to expand...
Click to collapse
I just tried it, with little hope of it actually working, on DCD3.2.0 ROM and couldn't get my Sony TV to work with any of the 24 codes. I too thought it might be the ROM, so I reflashed with the latest official "leaked" ROM and couldn't get it to work with that one either.
This is the first time I've seen this program actually work on a PPC since I owned my ipaq 5450.
This software is supposedly only available when it is distrubuted preinstalled by the OEM, and the only WM devices I've ever seen with it were HP/Compaq models.
This was the one program I truly missed when I left HP PDA's behind.
I hope someone figures out how to get it to work. I'm mildly surprised the program even runs on our titans.
nosmohtac said:
I just tried it, with little hope of it actually working, on DCD3.2.0 ROM and couldn't get my Sony TV to work with any of the 24 codes. I too thought it might be the ROM, so I reflashed with the latest official "leaked" ROM and couldn't get it to work with that one either.
This is the first time I've seen this program actually work on a PPC since I owned my ipaq 5450.
This software is supposedly only available when it is distrubuted preinstalled by the OEM, and the only WM devices I've ever seen with it were HP/Compaq models.
This was the one program I truly missed when I left HP PDA's behind.
I hope someone figures out how to get it to work. I'm mildly surprised the program even runs on our titans.
Click to expand...
Click to collapse
Just to be sure...you had beam enabled right? From his sig, it looks like Crobs is running DCD 3.2.0 as well. I was really hoping this would work. The Titan's placement of the IR port on the bottom (vs the side) would have made it an ideal platform for this kind of program.
crobs808 said:
This is the best Universal Remote software. I installed this on my Titan, and was able to control two of my TVs, a Projector, and a CELING FAN, lol....it can do everything, this truly is "universal"
(see attached cab file)
Click to expand...
Click to collapse
What settings do you have in your phone in order for this to work? (Beam should be on?)
Also, what ROM are you using?
Traketo said:
What settings do you have in your phone in order for this to work? (Beam should be on?)
Also, what ROM are you using?
Click to expand...
Click to collapse
How do you enable beam? I don't have it listed in Comm Manager
scrawnyb said:
How do you enable beam? I don't have it listed in Comm Manager
Click to expand...
Click to collapse
Ditto... Is there a setting that I'm forgetting about? The only thing that I could find on the stock ROM or on DCD 3.2.0 was in settings > Connections > Beam - with a checkbox for "Receive all incoming beams".
nosmohtac said:
Ditto... Is there a setting that I'm forgetting about? The only thing that I could find on the stock ROM or on DCD 3.2.0 was in settings > Connections > Beam - with a checkbox for "Receive all incoming beams".
Click to expand...
Click to collapse
Ya, that's it. Doesn't seem to be working for anyone. Care to elaborate Crobs?
Weird guys...I was actually able to get this to work with my Hitachi tv and RCA television. One is a huge big screen and one is a small one with a DVD player built in. That's all I know to tell you since I am not a devloper or coder myself, so I dont knwo why mine is or is not working...I do not have any other special software installed other than TomTom 7.450
FYI - I am running DCD ROM 3.2.0 with Radio 3.42.30
have you tried with any other electronics and seen if they worked. I cant get it to work either and i dont think my beam is sending anything out.
Fix IR
Check this reg key and see if it is as below:
Changed the following in the Registry:
[Mobile Device\HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
Disablepowermanagement=1
IntIR=1
Port=1
does the nevo software work for you serfboreds? I changed the disable....to 1, but it still doesnt turn on the tv or dvd.
i know that the beam is working since i was able to send a file through it to my Palm
serfboreds said:
Check this reg key and see if it is as below:
Changed the following in the Registry:
[Mobile Device\HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
Disablepowermanagement=1
IntIR=1
Port=1
Click to expand...
Click to collapse
Checked those entries. Disablepowermanagement was 0, changed to 1. Still nothing for me either.
dunebuggydude11 said:
does the nevo software work for you serfboreds? I changed the disable....to 1, but it still doesnt turn on the tv or dvd.
Click to expand...
Click to collapse
No, haven't had the time to try. Just trying to help get beam going for you. Seems dunebuggydude got beam working but no software. May not be compatible with titan.
Guys, I haven't tried it yet, but for all those unsuccesful attempts: how close to TV were you? I believe Titan has pretty weak IR and you need to be like right next to TV for this to work.
Related
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
I believe most people face this problem. I hv no solution to it, but I personally believe this is not a hardware prob and it can be solved. Hope to start this thread so everyone can discuss this together and come up with something.
got this from other thread...
bull_do3er said:
put registry editor shortcut in \windows\startup
put wififix.reg in \Program Files
all this does is set the HTCPreloadwifi=1 everytime i need to reset my device. i think the problem is the value was resetted to 0 everytime you reset your device. That's why the wifi doesnt work. not sure if this works for everyone. but for me its working nearly everytime.
Click to expand...
Click to collapse
is this a good idea?
Pehaps it is useful to give some more specific details. Indeed there are several users that run in to these problems, but many more (including myself) never experienced any misbehaviour whatsoever. There must be a difference somewhere.....
i faced the prob which when u set the HTCPreloadwifi to 1, it revert back to 0 after soft reset. then i found that this is actually bcoz of the file "WiFiInit", which is in the startup. so i removed it from the startup, set the HTCPreloadwifi to 1, then power off and on it instead of soft reset (soft reset might work, just play safe.)
rondol1 said:
Pehaps it is useful to give some more specific details. Indeed there are several users that run in to these problems, but many more (including myself) never experienced any misbehaviour whatsoever. There must be a difference somewhere.....
Click to expand...
Click to collapse
rondol1, will you stay here in this thread. who knows, we might spot the difference between your "working" device and our "half-working" device. appreciate that.
The point is, I never changed anything after flashing the ROM and WIFI works right away. I have noticed that with WEP encryption enabled things don't go that smooth. Without security OR with WPA enabled, I don't experience any problems with WIFI. About Bluetooth, I really don't use it, only to connect my TomTom GPS receiver and that give no problem whatsoever. But that comparison isn't fair, cos the TomTom app takes care of it by itself, without the general WM6 settings.
Perhaps it's good to mention that I use the latest WM6 builds, I red your post in some threads from older ROM's too. Could be that those earlier release had more bugs on this point.
i'm using Fantastic Mobiz v2.0b4....actually wanna to load up other new wm6, but instead of avoiding, i think we shd try to solve the problem..
anyway, i am thinking about whether there is anything wrong with the registry that caused the prob, or any 3rd party software that is interrupting the bluetooth's functioning. is there any way to "compare" the registries?
I don't know, but I hardly use any 3d-party software. And about solving the probs on early WM6 builds: isn't that a Microsoft job? If there is a problem in the OS, we don't gonna solve it by changing some regs!
rondol1 said:
I don't know, but I hardly use any 3d-party software. And about solving the probs on early WM6 builds: isn't that a Microsoft job? If there is a problem in the OS, we don't gonna solve it by changing some regs!
Click to expand...
Click to collapse
haha...ya...but i meant a cooked version of wm6. the developer might hv added something which works on his but not on others. any assumption hv to take into consideration. i guess that is how most probs are solved.
seems like no one patronize this thread...ahah , anyway i will still try to update what i've discovered until the next version of rom is up. who knows, people might be desperate and found this thread. i just hope someone will join in the discussion or i will look like a bloody fool who participates in my own thread.
right now, i insert btdwake and btlauncher to my startup folder. it works most of the time (not sure it works bcoz of the files that i put in the startup folder).
i still think that it might be a registry problem. will compare the registry with a working set's one of these days.
I've got also a problem when trying to enble Wifi, what you've done exactly? Does it works?
Gaexu said:
I've got also a problem when trying to enble Wifi, what you've done exactly? Does it works?
Click to expand...
Click to collapse
hi Gaexu. well...it is easy to make things work, but problem lies on the steps that make them work. enabling my wifi is fine, but not perfect.
I suppose your prob is when u go to comm manager, click on the "Wlan", then u see the radar (loading), after that, nothing happened, the icon still show the grey icon with the cross.
steps:
1.)first you gotta remove a file called "WiFiInit" from \windows\startup\ folder.
2.)next, go to the registry using PHM Registry Editor. go to HKLM\Comm\TNETWLN1\Parms, there are 2 reg dwords - "HTCPreloadStatus" and 'HTCPreloadWifi". change their value to "1".
3.)power off the device and on it back.
the reason to remove "WiFiInit" from startup is bcoz it seems to cause "HTCPreloadStatus" value to revert back to "0" after a soft reset. actually i've remove a few more things from startup, but i dun think there is any "linkage".
sorry about this, but don't expect the wifi to be enabled as easy before upgrading (at least not for me). to enable the wifi for the first time (after you soft reset everytime), go to comm manager, click on WLAN. then the radar thingy comes out, rotate a few round and disappear. while it is rotating, observe the "G" on top, it changes to the wifi icon and revert back to the "G". that means wifi is detected. click on WLAN again, and same thing will happen. now, push the on/off button to black out the screen(standby mode) and turn on again. wifi comes alive.
i am too long winded. this is my first time in my life typing more than 6 lines in a forum. do let me know if it doesn't work. good luck.
Thanks for your help
The Wifi works, but just for about 30seconds or 1minute... then it turns off
does anyone know this problem?
I will try it again and again,
thanks
Gaexu said:
Thanks for your help
The Wifi works, but just for about 30seconds or 1minute... then it turns off
does anyone know this problem?
I will try it again and again,
thanks
Click to expand...
Click to collapse
hv u change the value in the registry?
Yes, "HTCPreloadStatus" and 'HTCPreloadWifi" have the decimal value 1.
HTCResumeWifi = 0
I will retry it with another network (not the one from my University) maybe it works...
Gaexu, so how's your bluetooth? working perfectly?
i looked through the registry and found that many of the bluetooth keys are incomplete after comparing with other devices...but i need to extract more info from a workin prophet...
Hi scarymoviesg
Now my Wifi works perfekt (not with the one from the University but with all the others)
Thanks a lot!!!!!
Gaexu said:
Hi scarymoviesg
Now my Wifi works perfekt (not with the one from the University but with all the others)
Thanks a lot!!!!!
Click to expand...
Click to collapse
glad that it works... anyway...how's ur bluetooth?is it work?
Has anyone had success beaming contacts or appointments to another XV6800 after the DCD 2.3.2 upgrade? I can not connect with my wife's XV6800 - her's has the stock ROM still.
IF IR is hosed - is there a way to do this with Bluetooth?
SOLUTION - The only change I made to the 3.0.0 ROM was to modify (thanks azclown) as follows:
; ***** Disable IR Beam *****
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000000 <--------- change to 00000001
Then I found out that Pocket Informant 8 was the rest of my issue. I can beam now and send contacts or appointments via bluetooth. The option to send via bluetooth is no longer displayed on the PI8 menues, but just select beam - then when the beaming dialog comes up it will first try to find a IR beaming partner - wait and it will start selecting bluetooth devices next - pick the one you want and voila!
j-squared said:
Has anyone had success beaming contacts or appointments to another XV6800 after the DCD 2.3.2 upgrade? I can not connect with my wife's XV6800 - her's has the stock ROM still.
IF IR is hosed - is there a way to do this with Bluetooth?
Click to expand...
Click to collapse
When stock, I was able to beam files from my laptop to my phone using the laptop's send-file-over-BT utility. I can no longer do this under DCD 2.3.2. Perhaps our issues are related. The radio itself works (BT headset functions fine), so it's something in the new software.
Guys, I think he has IR Beam disabled....
; ***** Disable IR Beam *****
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000000 <--------- change to 00000001
this should enable beaming and IR.... I'm not 100 percent on this so if someone else knows better please speak up.... All I know is that I can xfer files using Beam..... edit this using any standard reg editor....
No dice...
azclown said:
Guys, I think he has IR Beam disabled....
; ***** Disable IR Beam *****
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000000 <--------- change to 00000001
this should enable beaming and IR.... I'm not 100 percent on this so if someone else knows better please speak up.... All I know is that I can xfer files using Beam..... edit this using any standard reg editor....
Click to expand...
Click to collapse
I made this change, recooked the Rom in the kitchen and no dice. My souped up XV6800 can't connect with my wife's standard ROM XV6800 (no small amount of teasing going on over this!)
Any other ideas?
im dealing with this same thing. just wondering if anyone else had any more insight
Same issue in DCD 3.0.0
I'm using the kitchen almost stock from DCD, I switched to Verizon, anded the HTC X key and adobe reader, but that was it. The only other change I made was that listed in my previous post to enable beaming. That does not seem to do it. Is there, perhaps, some other item in the kitchen that DCD removed that further disables beaming?
i am just using the base image that dcd compiled the time before the kitchen came out. i think its 2.3.2. when i went into that registry setting, my enable was already set to 1. i hate to say this (never thought i would) but i really need my IR haha
Had this same problem but finally got it to work out last night. I'm using DCDs 3.0 rom. 1st make sure under HKLM\software\microsoft\obex IsEnabled is set to 1. Next make sure under comm manager settings ---> bluetooth ---> mode tab ---> turn on bluetooth and "make this device visible to other devices" are both checked. Also check and make sure under settings ---> connections tab --->beam ---> receive all incoming beams is checked. That should do it. I got it working fine last night on 2 different moguls.
liemydude said:
Had this same problem but finally got it to work out last night. I'm using DCDs 3.0 rom. 1st make sure under HKLM\software\microsoft\obex IsEnabled is set to 1. Next make sure under comm manager settings ---> bluetooth ---> mode tab ---> turn on bluetooth and "make this device visible to other devices" are both checked. Also check and make sure under settings ---> connections tab --->beam ---> receive all incoming beams is checked. That should do it. I got it working fine last night on 2 different moguls.
Click to expand...
Click to collapse
Using 3.0.0 also - I tried that change to the obex IsEnabled key - and still nothing.... did you include anything else in the 3.0.0 kitchen?
Guys you do not need to mess with the registry to enable OBEX. Just go to the comm manager and enable Beam and also go to the connection settings and enable the beam from there. Make sure you able visible in bluetooth also.
I did this and was able to send files using the OBEX through bluetooth.
Try it out.
edit. you will notice that once you do this that you check the settings in the registry that obex will go from 0 to 1 in the registry.
my bluetooth works perfect. what i need is the ability to IR. any insight on the IR problem specifically?
Mills00013 said:
my bluetooth works perfect. what i need is the ability to IR. any insight on the IR problem specifically?
Click to expand...
Click to collapse
IR uses OBEX i believe. And when you want to send something through OBEX it uses the same protocol for bluetooth and IR. (Beam Feature)
What exactly is wrong with your IR. Because I tested mine and it works when i sent a document to my old Moto Q.
[email protected]$ said:
IR uses OBEX i believe. And when you want to send something through OBEX it uses the same protocol for bluetooth and IR. (Beam Feature)
What exactly is wrong with your IR. Because I tested mine and it works when i sent a document to my old Moto Q.
Click to expand...
Click to collapse
Carlos - did you include the enterprise section or some other section from the kitchen - maybe that is helping you because I do have all of those settings as you described and still can not beam or set up for obex bluetooth transfer.
j-squared said:
Carlos - did you include the enterprise section or some other section from the kitchen - maybe that is helping you because I do have all of those settings as you described and still can not beam or set up for obex bluetooth transfer.
Click to expand...
Click to collapse
No I did not include the Enterprise Settings, but I will on my next ROM (other reasons)
So you made sure that you enabled beam on the Comm Manager and on the connections settings for "beam" turned on bluetooth and made your device discoverable?
From there where you able to pair with a bluetooth device? such as you enabled the required authentication tab on security and connected to another bluetooth device?
P.S. What exactly are you trying to OBEX to? Are you sure that the computer or phone has OBEX enabled or that the settings are set the same to yours?
From there when you try to beam a file or receive a file what errors do you get?
I dont get any. I just right click an object select beam and make sure that the other device is visible and i send it to the device.
I think I found the problem....
I have beaming and bluetooth working now. The settings didn't change from my previous post, but I wnet back to my old Ipaq 4350 and beamed and sent appointments to my xv6800. Then it occured to me - the Ipaq is running on Pocket Informant 7 not the new version 8 in my xv6800.
I tried sending files via bluetooth and IR beaming from Resco file explorer and it works fine - so I think my issues are with PI8. I'll head over to the web-is forums for that....
solved
See first post - I added solution there.
I have been trying to set up a VoIP client on my Windows Mobile phone for a long time, starting with the HTC Wizard which I could never get to work.
I have finally managed to get a VoIP client with a really nice interface working on several phones that I have tried it on.
I am using ViaTalk as my provider but it should work with any VoIP provider.
It works great (with a slight delay, nothing that I can't live with) on an unlocked HTC Sprint Touch Pro 2, a T-Mobile HD2, a HTC Diamond and an HTC Fuze.
The application is by NCH software out of Australia and it is free to use, or if you want to unlock all of the features of the application, download and register the business edition.
Here is the URL for the download:
http://www.nch.com.au/talk/pocket.html
Or if you would like, PM me and I will be happy to send it to you as an attachment to an email.
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
hecthork said:
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
Click to expand...
Click to collapse
I am using the paid version but the only difference is that it unlocks some additional features that most people proably don't need anyway.
It is not trialware so it has no expiration.
thx you man, i'm trying this app since yesterday; works good!! easy to configurate, i'm using the free version because; i don't have 2 line, i don't use conferente mode... but it will be interesting trying these features xD
How does this app compare to AgePhone?
Hello,
why not to give a try to PortGo !
http://www.portsip.com/softphone.htm
The free version is sufficient and very simple to use, even with several providers (I currently use 2). Skin and language are easy to adapt if necessary (I've made it for French), see also here http://forum.xda-developers.com/showthread.php?t=508715
Dangze
bobzero said:
How does this app compare to AgePhone?
Click to expand...
Click to collapse
I really couldn't tell because I have never tried AgePhone.
I have tried most of the different VoIP clients mentioned throughout this site but I have never been able to get one to work right until I tried this one.
It could be that I am too stupid to configure them right or it could also be that they simply don't work very well, I can't say.
As for PortSIP, I never got it to work right and the developer dropped off line a while back as far as I can remember.
This little VoIP client that I am using has got a clean interphase, it is easy to configure, it does not require any special "helper" apps. so I am happy with it.
Hope that some of you enjoy it too.
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
ardec1 said:
{R^7Z trim]
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
Click to expand...
Click to collapse
I have mine set so that the light always stays on until I turn it off(I turn off auto back-light, my preference). So, no issues there. Additionally, I think there is a setting or app that will allow WiFi to run even while the phone sleeps. Or perhaps it is set into a low-power mode until the power key is pressed?
Howto in France ?
It seems great but how could I make it work in France.
My provider (mobile or at home) is SFR.
Thanks in advance to all for your answers.
Setup file attached to original post
I finally got around to attaching the setup file to my original post so it can now be downloaded directly from this site
Hi,
I suggest to please change the title to "Express Talk for WM".
I already tested it on my Ultimate 8502. I can call but can not receive incoming call. It ring but after receiving, it stop ringing with no active call and no sound. Any solution?
thanks
sadat007
After installing Pocket Talk and configuring it I get the message that my handheld device is blocking UDP port no 8000 and 5060. Of course it isn't but I can't make callas. Has anyone had the same problem?
installation unsuccessful
It fails to install for me...
I connect my HTC Mega (Windows Mobile 6.5, moded rom), I start the setup, my phones screen shows the installer but than says "Installation of NCH Swift Sound Pocket Talk.CAB was unsuccessful"
Doesnt matter if I choose MainMemory of StorageCard.. there is plenty of free space on both of them.
Any Ideas? Are there any prerequisites? I checked the NCH forum but couldnt find any help...
PS: trying to install directly from the .cab it leaves on my storage card wont work either
Hi sorry for my bad english, setup doesn't work on my hd2 why???
Franky24 said:
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
Click to expand...
Click to collapse
Myself some hours ago said:
I'm also using WMVoIP and my phone is enabled by default to use VoIP when wi-fi gets enough data traffic, so I don't need other VoIP apps except for second lined. Usually I switched off the phone radio and whitched on the wifi radio and VoIP wasd enabled as default phone line.
But my problem is now I can use VoIP over 3G at no penalization from my phone provider, and I can't set my phone to use VoIP by default.
Is there a way to set VoIP the first option and phone the second one, using 3G (not wifi) ?
Click to expand...
Click to collapse
Editing: I found this xda-dev's app here: http://forum.xda-developers.com/showthread.php?t=730303 and it works fine with one SIP line, in my Kaiser, even using 3G instead of wifi.
Thanks !
It works fine on my HTC Touch Pro cdma with wm6.1.
But I don't like the fact I can't use my original contact list...
Hey Guys,
Im wondering what would be better for me, Im based in the UK and I want to know if Using a VoIP Service such as Skype or get a Dedicated Phone line put into my address? what do you guys think?
- David Scheme
My wife has a 2008 Mercedes-Benz ML63 that comes with the COMAND system. She just moved from her trusty iPhone 5 to a GS5. Previously had no issues automatically connecting her iPhone to her car's OEM hands-free system. With the GS5, it won't automatically connect at all. As well, when she manually connects, it takes a few times before it will actually make a connection. Once connected though, it seems to work OK.
Has anyone else had similar issues? I searched around the net, and found articles with other brands of OEM bluetooth units, but there aren't a lot of answers.
At this point, the fact that her phone has such difficulty connecting to her car, she's tossing around the idea of reverting to her iPhone. I'd really like to get this solved, and keep her on Android if at all possible. Thanks in advance.
UPDATE: Here is the manual for the device: http://www.wireless4mb.com/user_manuals/Bluetooth_Cradle_USA_SLR_Web.pdf
pimpinonline said:
My wife has a 2008 Mercedez-Benz ML63 that comes with the COMAND system. She just moved from her trusty iPhone 5 to a GS5. Previously had no issues automatically connecting her iPhone to her car's OEM hands-free system. With the GS5, it won't automatically connect at all. As well, when she manually connects, it takes a few times before it will actually make a connection. Once connected though, it seems to work OK.
Has anyone else had similar issues? I searched around the net, and found articles with other brands of OEM bluetooth units, but there aren't a lot of answers.
At this point, the fact that her phone has such difficulty connecting to her car, she's tossing around the idea of reverting to her iPhone. I'd really like to get this solved, and keep her on Android if at all possible. Thanks in advance.
Click to expand...
Click to collapse
Weird. It works fine with my car (not command). For the most part, all the oem units work best with iPhones though.
In the car's settings, has she deleted her iPhone and made sure that the "connect automatically" option is checked for the S5? I don't know how MB does it, but there should be an option like that for each phone.
aooga said:
Weird. It works fine with my car (not command). For the most part, all the oem units work best with iPhones though.
In the car's settings, has she deleted her iPhone and made sure that the "connect automatically" option is checked for the S5? I don't know how MB does it, but there should be an option like that for each phone.
Click to expand...
Click to collapse
Thanks for the response. The system in these earlier models isn't that sophisticated. It works a lot like how a Bluetooth portable speaker works - it remembers the last 8 devices that connected to it, but you can't manage that list. I'll have to see if there is a way to force it to forget all of the devices - I didn't see anything in the documentation.
Thanks for the idea.
pimpinonline said:
Thanks for the response. The system in these earlier models isn't that sophisticated. It works a lot like how a Bluetooth portable speaker works - it remembers the last 8 devices that connected to it, but you can't manage that list. I'll have to see if there is a way to force it to forget all of the devices - I didn't see anything in the documentation.
Thanks for the idea.
Click to expand...
Click to collapse
Ah okay. There must be a way to reset it. Have you tried this?
From a random website.
you reset the system by pressing the "SYS" button to the left of the screen. It results in the first photo below. Then, select "Diagnosis" - that will take you to the second photo, which has a "System Reset" selection.
Click to expand...
Click to collapse
@pimpinonline - did it work?
aooga said:
@pimpinonline - did it work?
Click to expand...
Click to collapse
It didn't work. That appears to be the method to reset the COMAND system (DVD, Satellite radio, AM/FM radio, Navigation, etc) altogether. I'm still trying to figure out a way to just reset the bluetooth adapter.
pimpinonline said:
It didn't work. That appears to be the method to reset the COMAND system (DVD, Satellite radio, AM/FM radio, Navigation, etc) altogether. I'm still trying to figure out a way to just reset the bluetooth adapter.
Click to expand...
Click to collapse
Ok. Well good luck I would assume your dealer would know how.