Related
Hey guys, I upgraded to the Atrix from my Tilt2... I set up the bluetooth with my car (Audi A5) and the calling works fine but the car no loner imports my SIM contacts, recent calls, missed calls, and dialed calls list that my Tilt2 used to send over. Those options on the car are now just blank. Is there anyway to enable this? The bluetooth profile on both phones is just listed as "hands free". Is there any way to fix this or enable other connection profiles to send that data like my last phone did?
Thanks guys
I can pair my Atrix is my BMW 3-series but when it tries to download the phone book the BT connection drops. Sometimes I can start to make a call but it will drop the connection.
I can connect all my BB's and my HTC Inspire 4G just fine.
I think there is something wrong with the BT stack.
Ziuck said:
I can pair my Atrix is my BMW 3-series but when it tries to download the phone book the BT connection drops. Sometimes I can start to make a call but it will drop the connection.
I can connect all my BB's and my HTC Inspire 4G just fine.
I think there is something wrong with the BT stack.
Click to expand...
Click to collapse
I think you may be right... I did some more online searching after the post and stumbled upon an Audi forum where multiple people have lost the ability on several different car models after moving to a stock android device... however, it appears things fix themselves with CM roms which may have a more sophisticated BT stack. I wonder if it's hopeless about having that capability until 2.3 or the bootloader is cracked?
If I can't get this fixed soon then I will be forced to return this phone.
How can they screw up something so simple??
UTZorro said:
Hey guys, I upgraded to the Atrix from my Tilt2... I set up the bluetooth with my car (Audi A5) and the calling works fine but the car no loner imports my SIM contacts, recent calls, missed calls, and dialed calls list that my Tilt2 used to send over. Those options on the car are now just blank. Is there anyway to enable this? The bluetooth profile on both phones is just listed as "hands free". Is there any way to fix this or enable other connection profiles to send that data like my last phone did?
Thanks guys
Click to expand...
Click to collapse
I have this same problem in my Chevy Volt. Sometimes the phonebook works (but very slowly) but the call lists never work. Also seems to take a very long time to pair initially.
Sent from my MB860 using XDA App
A lot of cars can only import the phone book from the SIM card. Not from any other application on the phone.
So if your phone book is in Google Contacts or some other application...you'll need to port it into the SIM card itself for most cars to be able to read it.
Return it. I have new A4 and atrix pairs fine. I actually think its the clearest device I've used in my car yet
Sent from my MB860 using XDA App
fade?
"I have new A4 and atrix pairs fine."
And do you know WHICH phone book your numbers are in, or which phone books the A4 can pair with?
If his BT is connecting, and the phone is working over BT, there's no reason to think the phone is defective. yet.
UTZorro said:
I think you may be right... I did some more online searching after the post and stumbled upon an Audi forum where multiple people have lost the ability on several different car models after moving to a stock android device... however, it appears things fix themselves with CM roms which may have a more sophisticated BT stack. I wonder if it's hopeless about having that capability until 2.3 or the bootloader is cracked?
Click to expand...
Click to collapse
It's not a BT Stack problem...it's an Audi problem (or BMW, etc...). The manufacturers need to program their devices for Android. The ability to grab contacts and such isn't a standard bluetooth handsfree device option. It has to do something extra. How it *handles* that extra something differs by device...which is why some don't work with Android devices.
On top of that, there's a dialogue when you first pair the device that asks if it should have access to your contacts, call lists, etc...that you have to "Allow" or it won't ever be able to get those lists. It's been the same way on every Android phone I've ever used. If you don't hit Allow within 10 seconds the dialogue will go away and never come back...unless you unpair and re-pair the device. Try doing this and seeing if the dialogue comes up. If it doesn't, it's an issue with the way your Audi/BMW polls for contacts.
BTW works perfectly with my Kenwood receiver.
Ziuck said:
If I can't get this fixed soon then I will be forced to return this phone.
How can they screw up something so simple??
Click to expand...
Click to collapse
"They" didn't. Audi/BMW did. They didn't spend enough time programming to figure out that Android handles contacts slightly differently. Put blame where it's due.
hotleadsingerguy said:
"They" didn't. Audi/BMW did. They didn't spend enough time programming to figure out that Android handles contacts slightly differently. Put blame where it's due.
Click to expand...
Click to collapse
I have the 08' audi a4 and my contacts sync just fine, as do the missed calls.
" my contacts sync just fine"
SIM card contacts? Google Contacts? Exactly which or what "contacts" ?
Hi, new user here to searched and figured it'd be better to post in this thread rather than starting a new one.
I'm another Atrix user who is having issues with pairing the Atrix to a bluetooth car kit. I've got the VW Touch Phone Kit (rebadged Bury CC9060) which used to work perfectly with my previous Samsung Omnia as well as my partner's Samsung S8500. The problem I have was that with the 1.57 firmware, I could initially pair the phone and it would sync the phonebook up fine so that I could make or receive any number of calls without a hitch. But the issue was when I switched the ignition off then back on, the Atrix appears to pair correctly, it'll grab the phonebook but cannot make or grab any incoming calls. When dialing from the phonebook, it will initiate the call then drop out while the call still goes through. Incoming calls just aren't picked up at all. If I deleted the pairing and paired the phone up to the car kit again, it'd work until the first ignition off and back on again.
After I updated to the 1.83 firmware, this no longer works for me at all even though it appears to pair correctly and syncs the phonebook as well.
I've looked into upgrading the software on the car kit but I'm already on v0181 which is the latest for the VW branded kit. The Bury CC9060 kit has available a v0235 update but won't load on the VW kit as it does a checksum check. I'm looking at possibly editing the flasher to bypass the checksum check.
Has anyone else used the Atrix with this car kit and experiencing the same issues?
Thanks in advance
fmflex
A quick bump.
I find it hard to believe that I'm the only one using an Atrix with this car kit...
I really wanted to buy a car kit, I was even willing to pay the rather high price. Then i saw tht the Atrix just "snaps it" with those two spring arms.
You know what happens in an accident? The phone will fly out as a missle. Good luck finding it, if you were doing 30 when you got slammed, the phone will still be doing 30 when it launches out of the clips.
If it doesn't hit you, you still won't be able to find it or call 911 on it.
So, nice dock, I'm holding off for something that can be used "in case of accident". For that price, I expect a more robust product, designed to survive. (Note to Moto, calls Mercedes and speak to crash safety team.)
hotleadsingerguy said:
"They" didn't. Audi/BMW did. They didn't spend enough time programming to figure out that Android handles contacts slightly differently. Put blame where it's due.
Click to expand...
Click to collapse
I am not sure that the blame can be directed to the car makers not suiting the android configuration.
I had concerns about Androids paring car bluetooth, so when my wife got her Samsung running Froyo before i purchased the Atrix, I tested it on my 2010 A4 and it all worked faultlessly. All phonebook, dialled, missed calls & received calls. All her contacts are stored on the Phone too, not the SIM. It actually worked better with it than my old Nokia's, and my old iPhone 3G. All of which had contacts stored on the phone not the SIM.
Being in my car all day, I had to make sure it the Atrix running Froyo would work too, and that's why I tested it with my wifes phone before buying the Atrix.
I would have to say that the problem does have something to do with how the Atrix handles bluetooth. I have been having all the same issues that other users are having.
To be fair to the Atrix, I had only one problem when I originanlly bought it and that was loading the contacts from the phones storage, all the other options were working and it never displayed the annoying error message and it never dropped the connection either.
This has only started playing up completely since I rooted it and installed HeLauncher with Fancy widgets (maybe it's just a coincidence, but its unlikely i think IMHO).
I have since uninstalled the HeLauncher and Fancy Widgets, and yet the problem is still there, so I have no realistic reason why it isn't working anymore.
Because i work for Audi, I will check at work why this issue might be happening ( just with the Atrix not all the other Android phones) and see if their is anything that can be done to fix the issue.
Hi Staunch
I'd be very interested in what you can find out about this issue. I've basically got nothing out of VW and their official stand is that the atrix isn't compatible.
fmflex said:
Hi Staunch
I'd be very interested in what you can find out about this issue. I've basically got nothing out of VW and their official stand is that the atrix isn't compatible.
Click to expand...
Click to collapse
Ok, I have tried connectivity with the current version of MMI and it seems to pair up with NO error messages at all. It would appear at this stage that the new MMI generation have the "issue" fixed. I am still waiting for a reply from Service Technical Support to answer why the issue exists on the older MMI generations. It would appear that Audi in conjection with Apple focused their MMI setup for iOS, not considering Android OS's.
Will keep you updated once I have some more information about previous versions of MMI.
Blame the cars not the phone.
My phone works 100% well and perfect with my Acura.
I've also had fun trying to get my E46 3 Series BMW ULF BT module to talk to the Atrix - has no issues speaking to an older Nokia phone. Anyway after a LOT of experimentation I've finally pinned down the root cause of the problem, text messages (SMS).
I've yet to figure out the specific trigger but it is either the number of messages or something in a specific message it doesn't like. I figured this out because I noticed the envelope icon coming up on the BMW screen for 5-10 seconds before the bluetooth would drop out each time after connecting the pairing. Each connection only lasts 15 seconds at most.
Anyway there were 193 SMS messages in the car memory, maybe the 194th message was upsetting it. I deleted almost all the 1150 SMS messages in my phone and it was only when I got rid of all of them that it connected. I then had to manually clear the SMS messages in the BMW one by one (took a long while).
I then did some testing whereby I sent an SMS or two to my phone. I noted that the Atrix seems to periodly get asked to upload messages to the car. You can delete them in the car but if they are still on the phone, they come back shortly after. They always show as unread on the BMW unless you read them on the car screen. Reading them on the phone has no affect. Maybe the SMS side of BT headset support is borked on the Atrix.
So my conclusion is that while I don't know the detailed trigger specifics, for BMWs at least the Atrix Bluetooth issue comes down to SMS messages. My large contacts directory uploads in its entirety without an issue. The solution for reliable BT connectivity to the Atrix and a BMW seems to be in SMS message management. Get yourself a copy of SMS Backup from the market when you experiment.
Hope this helps others!
Matt
Does anyone have the Ca-Fi Android car stereo? It seems it was recently released. I really want one, and will probably get one.
ca-fi.com/en/
Im debating on ordering one too.... though they list a 800mhz and a 1.2ghz version. Seems the 800mhz version is the only one available
Wish XDA would make a section for it and some custom **** was done with it!
total junk. save your money
I got one yesterday and installed it. Save your money. Its total junk. Was definatelu rushed to market.
No android market (yes you read that right)
Navigation requires data connection either through hsdpa gsm 3g or wifi (meaning you have to provide data for navigation to work at all)
Voice navigation doesnt work (it asks you to install additional files via the market, which again doesnt exist so it fails)
Every time i start the unit it goes to fm radio even when i dont want it to. Force closing the radio app does nothing.
The list goes on and on and on. NEVER AGAIN
shassouneh said:
I got one yesterday and installed it. Save your money. Its total junk. Was definatelu rushed to market.
No android market (yes you read that right)
Navigation requires data connection either through hsdpa gsm 3g or wifi (meaning you have to provide data for navigation to work at all)
Voice navigation doesnt work (it asks you to install additional files via the market, which again doesnt exist so it fails)
Every time i start the unit it goes to fm radio even when i dont want it to. Force closing the radio app does nothing.
The list goes on and on and on. NEVER AGAIN
Click to expand...
Click to collapse
Oh that's disappointing. I'm still considering buying one, just to see if I can root it, and fix some of the problems that you listed.
Xitdis said:
Oh that's disappointing. I'm still considering buying one, just to see if I can root it, and fix some of the problems that you listed.
Click to expand...
Click to collapse
I actually thkught about that too. Problem is you really cant connect it to a pc so any rooting work woukd have to be done via microsd card and run natively in 2.2. Not only that even if you root it theres no gurantee the android market would be installed as the "default" market. This means the voice navigation may never be solved.
Long story short, i am veey disappointed. :-(
that unfortunately, I wanted one for my birthday
shassouneh said:
I actually thkught about that too. Problem is you really cant connect it to a pc so any rooting work woukd have to be done via microsd card and run natively in 2.2. Not only that even if you root it theres no gurantee the android market would be installed as the "default" market. This means the voice navigation may never be solved.
Long story short, i am veey disappointed. :-(
Click to expand...
Click to collapse
Doesn't it have a USB port on it?
I made the same mistake of purchasing one. I have been unsuccessful in trying to root it. Z4 will just freeze the device requiring a power cycle. I attempted to connect via USB but did not have any luck using this method either. The problem is that the radio runs both USB ports in Host mode. This keeps it from showing up as a device when you connect it to a computer. I have tried both the front and rear ports with Windows and Linux.
I did manage to get the Android Market app installed. It took a good bit of work and involved copying the Google apps including first boot to an SDcard and sideloading them. The first boot app did break my home button, it currently does nothing and I can't figure out how to re associate it with the launcher.
Once I was able to connect my Google account, I was able to sideload the market apk. Of course, this required working wifi. The dumb device is configured for wifi using a wpa_supplicant file which specifies that 802.1x authentication is required. Seeing as I'm not using this on my wifi, I needed an app called wifi fixer to override this setting. I also needed to setup an unsecured wireless network because I couldn't get wifi-fixer to connect to a wep or wpa network. Once connected, the wireless was very spotty but worked long enough for what I needed.
After all this was completed, I was able to download an offline navigation app, copilot live, that would allow me to use the device as a nav while I wasn't sitting in the driveway connected to the wifi. I did try connecting to my rooted DroidX with CM7 using wifi tether but could not get the radio to complete the connection.
As shassouneh pointed out, it boots into FM Radio every time its powered on. This allows it to start playing music quickly, but is very annoying. I typically stream music from my phone over bluetooth which requires the volume to be much louder than when listening to the FM Radio. When you start the vehicle, the volume is remembered and will be deafening. The FM radio application is very buggy and it will take several attempts to save your radio presets with an acceptable name. It tries to use the digitally broadcast station information as the preset name, but often it just returns garbage. After trying some twenty times, I was able to get most of my presets to read the frequency and the FCC station name. (ex. 93.1 WPOC).
The touch screen is very disappointing. It's a low-quality restive type which requires that you touch below the point you're aiming for. This makes getting to buttons at the very bottom of the screen a challenge. I tried calibrating the screen, but was sent into and endless loop of touching the cross-hairs...
The "Phone" app has all the bluetooth configuration including pairing, contacts, music, etc. it is very rudimentary. The radio frequently fails to connect to my phone on its own and needs to be forced to connect. Sometimes the play button will start the phone playing music and other times it won't. I haven't found a rhyme or reason for it yet. It doesn't support AVRCP and as such you get three buttons when streaming music over bluetooth: Previous, Play/Pause, and Next. There's no indication of which song is playing nor is there any way to browse the music on the phone from the radio.
Overall, the device is absolutely terrible. Perhaps if I could root it, I could fix a number of its annoying characteristics and it wouldn't be so bad. I was most disappointed by the poor wifi and the FM radio at boot. There is such potential here to make an awesome device... Do not waste your money on this piece of garbage no matter how tempting it may be.
Bought one also !!!
I discovered that the product seems to be sold has with another brand :
http://www.ekoore.com/web/en/product/car-hi-fi-2/elija-2/overview-6.html
The point is that they are providing an update.zip containing files and probably could be used for rooting the device. Found the link http://www.ekoore.it/download/elija/update.zip in the italian forum.
From what I understood, this is a 2.3 device ...
Confirmed mine is 2.3.3
Tried several rooting tools (Z4, GingerBreak, Visonnary+, Universal Androot ...) none of these are working.
Wasn't able to dump the rom (no ADB, used terminal with RomDump V7.2) but found that there is a physical switch inside the box. I can have a message displayed "No signal received", just by starting the device while the switch is pressed. Didn't manage to konow if this is bootloader mode or not.
Found a Quick Start guide explaining how to build kernel and so on http://wendang.baidu.com/view/6545cb13a216147917112879.html
Chip TC8900 seems to be used widely for several chinese tablets. So rooting shouldn't be as difficult as it seems. My guess is that the only way to have it rooted is to modify the update.zip above....but I don't know how to do it !!
From what I understood, the radio, BT etc ... parts are not running Android and are something completely different. The only way to switch to an android environment is to go to navigate mode.
Guys,
I'm surprised, I've had this installed in my car for a couple months now and it works great and I do use it daily and thoroughly.
I have installed Android market (couple of minutes, easy to do), have my email, contacts, everything setup, I even get auto updates for installed apps
Bluetooth pairing with both my HD2's works flawlessly and synced all contacts from both phones
The dedicated iPod interface works great with my 160Gb iPod, I have a USB hub in the glovebox with a 2.5" HDD , WiFi dongle and 3g dongle all connected in.
Navigation doesn't require a data connection, I have a several different SatNav apps installed - some online and some offline, but I stick with Waze as I like it..., Waze unfortunately starts up in portrait but that's easily sorted with a press of the home key and Waze also puts up a single warning about battery being flat, but there's no battery, so what would you expect.....
can also listen to good quality internet radio on the move
If you buy a device like this, you've gotta expect a data connection to be required for initial setup of your apps and how you want them, I've run the device without internet, through my phone and through a 3g dongle.
It works properly and reliably with my original steering wheel controls and the way it sets this up is the best I've seen on a in car device and simplicity itself.
It also boots to the last source being played, in my case normally iPod, but if the iPod etc is missing, then it will default to the radio.
The touchscreen isn't the best in the world, but is very useable, if the alignment is out then recalibrate it by holding the back button until the calibration screen appears..
Only thing I really don't like is if you burn some mp3's to a cd/dvd, they play through the dvd interface, not through the android media players.
I genuinely like the unit, it's a nice toy to have in the car and has no more issues than any other android device I've used...
J
Should say that the FM quality is really awful ! Can't even get the RDS working ...
French translation is missing sereval items (or completly false). Got the wifi + market without too much trouble. The touchscreen is usable.
I definitely love to have it rooted
Xitdis said:
Does anyone have the Ca-Fi Android car stereo? It seems it was recently released. I really want one, and will probably get one.
ca-fi.com/en/
Click to expand...
Click to collapse
I've got that stuff from their dealer in Russia, I think juliabrothers.net
Cool device. I loved it sound quality, pure, very sharp image. Very quick response. Yes, the touch screen isn't as good as we used to have on smart phones. Still works o.k. Just look at others DVD player made on Windows CE6.0 platform. They ain't better in anyway.
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
naboleo said:
Should say that the FM quality is really awful ! Can't even get the RDS working ...
French translation is missing sereval items (or completly false). Got the wifi + market without too much trouble. The touchscreen is usable.
I definitely love to have it rooted
Click to expand...
Click to collapse
Could you please give me a hint how you manage to install Market on that thing?
Still working on it. Which Android version do you have? I have 2.2
You see, Android Market which built for smart phones doesn't work very well for CAR stereo devices. That Market doesn't differentiate between "good" and harmful applications, which can shut down your system forever.
Remember most of software designed for smart phones doesn't work under CA-FI platforms. Supplier said so, I 'd be happy to be wrong.....
---------- Post added at 06:25 PM ---------- Previous post was at 05:39 PM ----------
naboleo said:
Confirmed mine is 2.3.3
Tried several rooting tools (Z4, GingerBreak, Visonnary+, Universal Androot ...) none of these are working.
Wasn't able to dump the rom (no ADB, used terminal with RomDump V7.2) but found that there is a physical switch inside the box. I can have a message displayed "No signal received", just by starting the device while the switch is pressed. Didn't manage to konow if this is bootloader mode or not.
Found a Quick Start guide explaining how to build kernel and so on
Chip TC8900 seems to be used widely for several chinese tablets. So rooting shouldn't be as difficult as it seems. My guess is that the only way to have it rooted is to modify the update.zip above....but I don't know how to do it !!
From what I understood, the radio, BT etc ... parts are not running Android and are something completely different. The only way to switch to an android environment is to go to navigate mode.
Click to expand...
Click to collapse
Is that possible to use that manual for building a kernel, which could be used instead of pre-installed software? Seems interesting. Any thoughts?
Market came from the 2.3.3 build already installed on device. You probably can try the apk within the update archive http://www.ekoore.it/download/elija/update.zip . As the italian website is quite slow i extracted it. From what i understood update seems to not working on all devices.
Regarding the manual, of course I was thinking it could help for anything like root, recovery image or enabling adb. But honestly i don't have enough knowledge to do myself.
Hi Everyone, just found this thread. I have this unit as well and have been building info on the MP3car site about it, overall i'm happy with the unit although i haven't been able to do everything i want to it.
The audio quality for me is good and i can tether data off of my phone to play internet radio and navigate through waze or otherwise. I'd definately like to see some development in this area myself as there are some welcome improvements to be made. i've sideloaded the market but was never able to update it. the player will default to the last built in media that was played when it shuts down and there seems to be several volume streams built in, i've heard people haven't been able to adjust these with volume apps.
here is the MP3car thread: http://www.mp3car.com/android-tablet/150109-innotrends-ca-fi-on-order-will-review.html
Upon request, here is the update zip from the italian forum. Rename from update.zip to elira-update.zip
elija-update.html
I recently purchased and installed the Ca-Fi "Universal" 620 to replace my JVC head unit that died after 5 years. Because there isn't much information out there about this product, not even from the manufacture, I thought I'd provide the good and bad from an audiophiles perspective(...and I only coin the term audiophile because I have a full on sound system in my car, not because I'm into the lossless debates and all that BS).
The Bad (or the ugly):
-Has an individual RCA jack for subwoofer output. (left/right(white/black, red) is pretty standard. Now I have to buy a sum'er to join the channels. What if I had two subs running left and right channels of bass...I'd be up a creek and would have to buy splitter then a line driver...blah come on.
-Although there is individual subwoofer level control there is no subwoofer (low) frequency control. So, my lows that run to my subwoofer are the lows that will run to my speakers and I can’t do this cause my front stage was meant for highs and mids.
-The Graphic EQ, although having 10+ frequency to set they provide automatic roll off of nearby frequencies so, it's hard to fine tune.If you’re going to give me that many frequencies then please let me control each one of them.
-The balance controls (and all other touch screen sliders)were OK but, they sorely need increase/decrease buttons (i.e. “+” and “-“). Trying to configure a good sound stage is hard with resistive touch screen sliders.
-The P.CNTL (I assume Power Control, again no documentation) is switched off and on when you change sources (or I think actually when no sound is “sensed”) whaa? So now, because my amps have delayed starts, each time I switch a source (or Pandora even buffers a new song) the relay power drops to my amps and I have to wait for my amps to power up again. Not to mention the pops because of the high current switching on and off..man. So now I have to find an off delay relay so my amps don't turn off when I change the source. Now I could very well be the idiot on this one and need to use the P.ANT (I assume power antenna) but, the reason I didn’t is because P.ANT is solid blue wire, whereas P.CNTRL is a blue with white strip which is more industry standard for relay control.
-The boot up source is always going to the Radio. I read some other folks already discuss that here and there but, come on, really, you can't just remember the last source I had.
-Bluetooth (or lack thereof) yes, it will play your music from your phone (in my case HTC Sensation) but, that's about it. If I want to change an artist or song or whatever I have to do it from my phone. I thought it would have this to make me a safer driver so I don't have to look/mess with my phone to get new songs, guess that's what I get for assuming?
-Auto screen Dimmer doesn't work or isn't that great cause I still have to manually dim the screen at night.
-Resistive touchscreen I gotta hammer the screen to push buttons. Each push takes my attention away from the road, no bueno!
-Wifi doesn't support WEP or WPA no biggie since I'm driving and I don't think hackers do drive by hackings (or do they?). But, still sucks cause when I use it at the airport I have to turn it back on. Just a nuisance but, wifi WILL tether (provided you buy the additional USB Wifi Adapter).
-Some Apps don't recognize my wifi connection and thus will not work. Case in point, Google Maps. wft! the whole reason I got the thing was to wifi tether with my phone and control goolge maps from ca-fi. Nope can't do it. booo.
-Double DIN – not really. I don’t know what standards they followed but, my original brackets from my original Double DIN HU (head unit) didn’t work. The unit sticks out so far my radio door won’t close and there’s a gap of about .25 inches on both sides. No install kits will work with this because it’s not truly a standard Double DIN.
The Good
-The bluetooth phone capabilities work good. Contact list is ok. Of course it sucks for me because of the whole P.CNTRL thing. Yes, when I switch to Phone it turns off and on my amps…grrr.
-Mini SD card slots and a miniUSB port in front, very nice/convenient.
-System isn’t as slow as one might think for such a “slow” processor. My HTC Sensation runs circles around this thing ;p.
-Nice interface for the radio.
-You can run Apps. Although a lot of them crash (i.e. Force Close) every now and then for no apparent reason.
-Pandora works (with wifi tether) very nicely.
-Push button (knob) for mute and knob volume control.
….that’s all I’ve got for now but, so far the goods don’t out weight the bads so, I’m not happy with regards to the amount of money I spent vs. what I’m getting vs. what actually works. I’m not upset because I went into this fully knowing I was going to be a guinea pig but, if you’re a music first, apps and other **** second, kind of person like me steer clear my friends.
Not that any manufacture ever cares or even reacts to forum post, I’m going to try and communicate this to the manufacture and hopefully see if a) they’re aware of these issues and b)if they plan to release fixes/patches to help their “new adopters” out. Don’t get me wrong this company has a great product and great idea but, they’re seriously mistaken if they think they can compete with the big boys (Android Apps or no Android Apps).
What do jou Guys/girls think about this product....... http://www.chinavasion.com/2-din-ca...chable-android-23-tablet-panel-wifi-gps-dvbt/
I find it very interesting
I recently bought Galaxy S III and installed many applications. S voice isn't working right thou, but I managed to create a website using gs3 for only 2 hours!!
This phone is so fast that everything happens for seconds! if you have gs3 go to puzl. com and check out what you can do!
But do you know how make S voice work? Even when I'm connected to Wi-Fi or using my mobile data it says Connection Error?
Yep
Same Problem here. First time Android user, but 16 years in IT, and 4 year iphone user. Love the O/S, but how does one figure out what's conflicting with S-voice?
same
My issue is similar, not the connection error. Whenever I speak a command, it types it out correctly and then does nothing. Any ideas on how to fix?
seanbduff said:
My issue is similar, not the connection error. Whenever I speak a command, it types it out correctly and then does nothing. Any ideas on how to fix?
Click to expand...
Click to collapse
Same issue I'm having. I don't get it.
seanbduff said:
My issue is similar, not the connection error. Whenever I speak a command, it types it out correctly and then does nothing. Any ideas on how to fix?
Click to expand...
Click to collapse
I think it only does nothing when the app isn't compatible. ie winamp works fine but playerpro doesn't.
other than that it works fine for me. I've used other versions of vlingo on other devices and it's nowhere near as good as this.
are all of you OUT OF THE BOX users....or have you done other things to your phones??
I have the same problem s voice worked at 1st then the next day it stopped working. I have only downloaded the normal android apps.
Same Problem
I spoke with a level 2 tech at Samsung and was informed that I needed to do a factory reset.
I have a Sprint S3, and it will pair to my car stereo just fine, but it keeps disconnecting. Once paired, there is option boxes for "Call audio" and "Media audio"
It seems like if I turn one option on, it disables the other, and vice versa. Every time I start the car, the pairing is out of whack and I have to start over, enabling whichever one I want, and after a few times it works. I did get both to work one time, but as soon I turned car off then on, it was broken again.
My old phones have never had a problem connecting both Call and Media to my car, so I am concerned it is an issue with the S3.
I have 2010 Nissan Altima with the upgraded stereo. I have removed all previously paired devices so only the s3 shows up. I have removed and re-added the s3 several times. I have renamed the car's bluetooth name several times as well.
Is anyone else experiencing a similar issue, or can you test it with your car audio systems and let me know if it works for you?
Let me know if there some information I should provide to better understand the issue.
Thanks,
Rob
Hey robmtx, this might help you out. Theres an app in the market called bluetooth fix repair.
I had the same issue with my last two droids (1 and 3), and this solved the dropped connections. good luck
Thanks.
I'll give that a try.
I've also been reading how this might be more of an ICS issue than a device issue. It appears there are similar discussions in other device threads. I'll keep researching and also try this app.
I used my S3 in a rented car a view days ago and paired it with the installed Ford car stereo.
I played MP3 via Bluetooth and made some calls via Bluetooth. It all worked flawless. I also did not see any checkboxes for "call audio" or "media audio".
When I left the car and came back later it connected automatically. So I guess the problem is not a general problem.
this happens on mine as well from stock XALE8 to the latest XALF5. i went ahead and posted on samsung's FB page..but doubt we'll get a response
by the way, ive had this same issue whether im connecting to a bluetooth 2.0 or bluetooth 3.0 headset/car kit.
Right I might know the answer to this as I had the same problem as few weeks ago.
If you have Facebook, twitter, whatsapp or anything like this best thing is to get rid of them if you don't want to go to your accounts and sync on your phone and untick the sync with contacts on any of the apps you have installed.
Then go to call log and clear your call history.
Delete the bluetooth pairing turn the phone off and back on, repair with the car, mine has worked perfectly since I did this.
Sent from my GT-I9300 using xda app-developers app
Motogp1 said:
Right I might know the answer to this as I had the same problem as few weeks ago.
If you have Facebook, twitter, whatsapp or anything like this best thing is to get rid of them if you don't want to go to your accounts and sync on your phone and untick the sync with contacts on any of the apps you have installed.
Then go to call log and clear your call history.
Delete the bluetooth pairing turn the phone off and back on, repair with the car, mine has worked perfectly since I did this.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Did you remove your Gmail account too when doing this? I plan to remove FB, stock e-mail (yahoo) but wasn't sure I wanted to go through removing gmail and removing Touchdown for Exchange.
ExTREmE99 said:
this happens on mine as well from stock XALE8 to the latest XALF5.
Click to expand...
Click to collapse
Sorry for the newb question - but what are these in reference too? Are they a firmware or similar version of something? I was looking under About phone but didn't see anything similar.
Robmtx said:
Did you remove your Gmail account too when doing this? I plan to remove FB, stock e-mail (yahoo) but wasn't sure I wanted to go through removing gmail and removing Touchdown for Exchange.
Click to expand...
Click to collapse
No Gmail is fine.
Sent from my GT-I9300 using xda app-developers app
I have no problems pairing the s3 with my Volvo. Streaming, skipping titels, switch to phone during streaming - everything is working fine. Syncing E-Mail via Exchange an Gmail makes no difference.
Robmtx said:
Sorry for the newb question - but what are these in reference too? Are they a firmware or similar version of something? I was looking under About phone but didn't see anything similar.
Click to expand...
Click to collapse
yes this is your firmware version. settings > about > build number > I9300XXALF5. this is the most current. stock should be I9300XXALE8. under baseband version is your modem (which should contain the drivers for your 3G radio/bluetooth/wifi (i think)
ExTREmE99 said:
yes this is your firmware version. settings > about > build number > I9300XXALF5. this is the most current. stock should be I9300XXALE8. under baseband version is your modem (which should contain the drivers for your 3G radio/bluetooth/wifi (i think)
Click to expand...
Click to collapse
My Build number is IMM76D.L710VPALEN which threw me off. Guess it is different for Sprint. Baseband L710VPLEN
I think I'll just buy a car without bluetooth and be done with this mess. It's so annoying playing the "will it pair" game. :laugh:
Some Sony Head Units tend to be a nightmare.
Sent from my GT-I9300 using xda premium
bluetooth bug
I have a strange problem with my bluetooth audio...I have a Denso radio in my Ford Mondeo and the nightmare starts whan I connect phone via bluetooth to it. Phone some time don´t wake up from sleep. The only way how to solve (partialy) this is to reset phone (long press of power button). Then phone connect perfectly and everything is working like a charm. This problem I had on every rom I´ve tried yet
Every other phone I´ve had before didn´t suffer such prblems (galaxy note, evo 3d...)
Somebody could help? I don´t know what to do...
Same Issue
I'm having the exact same issue with my SG3 (Stock, not rooted *yet*). The initial pair works great - phone and audio sync. Once I shut the car off and back on again, the Phone connection does not automatically initiate and I have to manually connect it on my head unit. I'm driving a 2013 Mazda CX5. It's not my headunit since both my HTC Inspire 4G and HTC One X connect without issue. Another annoyance is the lack of song titles or other ID3 info on screen. Even my old Inspire had that!
My connection is great, but I am having an issue with tags. I'm using PowerAmp, but my Alpine unit displays the wrong song info - it automatically uses the default app. Is there any way to fix this?
Robmtx said:
I have a Sprint S3, and it will pair to my car stereo just fine, but it keeps disconnecting. Once paired, there is option boxes for "Call audio" and "Media audio"
It seems like if I turn one option on, it disables the other, and vice versa. Every time I start the car, the pairing is out of whack and I have to start over, enabling whichever one I want, and after a few times it works. I did get both to work one time, but as soon I turned car off then on, it was broken again.
My old phones have never had a problem connecting both Call and Media to my car, so I am concerned it is an issue with the S3.
I have 2010 Nissan Altima with the upgraded stereo. I have removed all previously paired devices so only the s3 shows up. I have removed and re-added the s3 several times. I have renamed the car's bluetooth name several times as well.
Is anyone else experiencing a similar issue, or can you test it with your car audio systems and let me know if it works for you?
Let me know if there some information I should provide to better understand the issue.
Thanks,
Rob
Click to expand...
Click to collapse
i have the exact same problem, having before a Milestone/Droid 1 and a Galaxy S1, both have functioned flawlessly with my car...
By the way, my car is a Renault Fluence 2011, maybe it uses the same BT chip as your Altima as Renault and Nissan are pratically the same manufacturer...
SmoothB said:
My connection is great, but I am having an issue with tags. I'm using PowerAmp, but my Alpine unit displays the wrong song info - it automatically uses the default app. Is there any way to fix this?
Click to expand...
Click to collapse
PowerAmp does not send the Tags - Period
The devs may be working on it soon
---------- Post added at 03:29 AM ---------- Previous post was at 03:25 AM ----------
otakonx said:
I'm having the exact same issue with my SG3 (Stock, not rooted *yet*). The initial pair works great - phone and audio sync. Once I shut the car off and back on again, the Phone connection does not automatically initiate and I have to manually connect it on my head unit. I'm driving a 2013 Mazda CX5. It's not my headunit since both my HTC Inspire 4G and HTC One X connect without issue. Another annoyance is the lack of song titles or other ID3 info on screen. Even my old Inspire had that!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1732226
Not just you mate :crying:
Mazda CX5
otakonx said:
I'm having the exact same issue with my SG3 (Stock, not rooted *yet*). The initial pair works great - phone and audio sync. Once I shut the car off and back on again, the Phone connection does not automatically initiate and I have to manually connect it on my head unit. I'm driving a 2013 Mazda CX5. It's not my headunit since both my HTC Inspire 4G and HTC One X connect without issue. Another annoyance is the lack of song titles or other ID3 info on screen. Even my old Inspire had that!
Click to expand...
Click to collapse
Hi,
Did you get it working with CX-5 as I just spent 500pounds on this phone and have exact same problem. Thinking of getting an HTC One X instead.
gravyuk said:
Hi,
Did you get it working with CX-5 as I just spent 500pounds on this phone and have exact same problem. Thinking of getting an HTC One X instead.
Click to expand...
Click to collapse
So far I'm still in the same boat. I rooted today and used a market app called "Bluetooth fix" so next time I'm in the car I'll see if it fixed the issue.
Sent from my GT-I9300 using xda app-developers app
I have a Galaxy S3 I9300 for a couple of weeks now and I love it, other than the fact that I keep having a strange issue with the Bluetooth connection with my carkit. I've been searching forums for similar issues and I found a variety of carkit related problems, but none of the ones I found describe the same problem as what I'm having:
- Initially the Bluetooth connection works fine and I can play music or make a call through the carkit just fine
- When I switch off the car's systems and don't use any apps on the phone in the meanwhile, and then start the car's systems again, it establishes the Bluetooth connection just fine again
- When I switch off the car's systems and I use other apps for a while and then start the car again, it won't work. Bluetooth does appear to connect, but after that it just doesn't play ball. When I try to play a song at this point, the phone shows the song is playing, but neither the phone nor the car audio produces any sound
So anyway, every morning before leaving to work and every evening before going home, I reboot my phone first. Then I step into the car and it establishes the Bluetooth connection just fine. But if I don't reboot the phone first, it just won't work. Now I guess I could setup a tasker profile to automatically reboot the phone, but I'd rather just get the problem fixed.
I run a Galaxy S3 I9300 with stock Android 4.1.1, rooted. I have already tried to run the "Bluetooth Fix Repair" app and afterwards had to pair the phone with the carkit again, but that made no difference.
Any help would be greatly appreciated!
*bump*
Some additional info:
This issue has now also happened a few times while driving. While music (through Spotify) was playing over the bluetooth carkit, it would sometimes just stop working when I opened a different app (like for example opening an SMS). Spotify was still running (and the song was still ongoing) and also the bluetooth connection still showed as being connected, but it just wouldn't produce any sound anymore.
Anyway, it seems clear to me that this is a bluetooth issue, but I have no idea how I can troubleshoot this beyond what I've already done.
I would be happy to pay whoever can fix this problem..
With an issue like you are describing it may be helpful to list the headunit model too. I do not own an S3 but I have a multimedia headunit (Pioneer AVH P4400BH) and have found that toggling my Bluetooth on and off will help the headunit to see the Bluetooth on my Android device. This may not resolve your issue though.
Another thing to consider, your headunit may have an update-able firmware. That said if your headunit does have an update-able firmware I would check out the procedure, ensure there is a way to roll back to your current firmware and try that. If your headunit was purchased at an electronics or and audio retailer you may wish to speak with them. Your issue may not be with your phone but with your headunit, but this should help as far as troubleshooting since your issue involves multiple devices.
ItzCrooK2UxD said:
With an issue like you are describing it may be helpful to list the headunit model too.
Click to expand...
Click to collapse
My car is a Renault Megane RS, the carkit was built in. I believe it's called Renault Carminat TomTom.
ItzCrooK2UxD said:
I do not own an S3 but I have a multimedia headunit (Pioneer AVH P4400BH) and have found that toggling my Bluetooth on and off will help the headunit to see the Bluetooth on my Android device. This may not resolve your issue though.
Click to expand...
Click to collapse
I've covered everything like that in about 100 different ways, none of which made any difference.
ItzCrooK2UxD said:
Another thing to consider, your headunit may have an update-able firmware. That said if your headunit does have an update-able firmware I would check out the procedure, ensure there is a way to roll back to your current firmware and try that. If your headunit was purchased at an electronics or and audio retailer you may wish to speak with them. Your issue may not be with your phone but with your headunit, but this should help as far as troubleshooting since your issue involves multiple devices.
Click to expand...
Click to collapse
Good point. It does have an SD card slot, but as far as I know that's only to update the maps of the navigation system. I'll see if I can figure that out.
Thanks for the tips!
By the way - I do think that it's unlikely that the carkit itself is the troublemaker. Especially because opening an SMS on my phone can trigger the whole thing to stop working (it doesn't happen every time, but it did happen several times). Please correct me if I'm wrong.
Apoc_ said:
By the way - I do think that it's unlikely that the carkit itself is the troublemaker. Especially because opening an SMS on my phone can trigger the whole thing to stop working (it doesn't happen every time, but it did happen several times). Please correct me if I'm wrong.
Click to expand...
Click to collapse
It is in fact very possible that it is your phone, but wanted to throw it out there that bluetooth headunits can be troublesome on their own. Now I am not familiar with your headunit, but does it save bluetooth IDs? Like on my headunit and many other aftermarket headunits, it will save 3 bluetooth devices. If it does, have you tried clearing other devices and moving your S3 to the top? Odd as it sounds this has made a difference for me. Also do you have other bluetooth devices in the car, such as the 3GS you mentioned?
Also a logcat of this happening would be beneficial. If you do not know how to pull a logcat there is an app on the market called catlog or alogcat. Both are free and are invaluable in troubleshooting a ROM issue. In short it tells a developer what is going on as far as events being triggered or failures within the ROM.
ItzCrooK2UxD said:
Now I am not familiar with your headunit, but does it save bluetooth IDs? Like on my headunit and many other aftermarket headunits, it will save 3 bluetooth devices. If it does, have you tried clearing other devices and moving your S3 to the top? Odd as it sounds this has made a difference for me.
Click to expand...
Click to collapse
Yeah I had read that too in some other thread (I went through just about every bluetooth related thread I could find, before I posted this topic). Mine saves up to 5. It didn't have anything in there except for my previous phone, which I had cleared. I also tried re-pairing the S3 several times, that didn't make any difference either.
Now, I just read somewhere that some people are having disconnection issues on the same carkit. In their case, in the end the problem turned out to be that their carkit will import all of their contacts from their phone (so you can call people even while your phone is in your pocket), and this would cause trouble when there are contacts without a phone number associated with it (just like my thousands of Exchange contacts). The people in question are talking about random disconnects though, whereas in my case it happens after doing some stuff on my phone. So it's probably unrelated, but I'll give that a try anyway just to rule it out. I just need to figure out a way to stop the carkit from importing contacts, because removing thousands of email contacts is obviously not an option.
I'll keep this topic updated with any progress. If anyone has any other ideas, please keep em coming. Thanks for the help so far!
ItzCrooK2UxD said:
Also a logcat of this happening would be beneficial. If you do not know how to pull a logcat there is an app on the market called catlog or alogcat. Both are free and are invaluable in troubleshooting a ROM issue. In short it tells a developer what is going on as far as events being triggered or failures within the ROM.
Click to expand...
Click to collapse
Didn't think of that, great tip, thank you! I do run the stock ROM by the way.
I've installed alogcat just now. Does it just keep running automatically in the background?
Apoc_ said:
Didn't think of that, great tip, thank you! I do run the stock ROM by the way.
I've installed alogcat just now. Does it just keep running automatically in the background?
Click to expand...
Click to collapse
It reads a file that is being constantly updated (which happens to be the logcat file). Typically I will clear it right before doing what it took to cause the failure, like in your case in your car with the bluetooth on.
I've got Audi with BT and S3 with custom rom and I've got similar problems with BT. It connects automatically but if I switch off BT in phone and switch it on again - it doesn't connect any more. I had this since I bought a phone and it was on all ROMs I used.
YoghurtPL said:
I've got Audi with BT and S3 with custom rom and I've got similar problems with BT. It connects automatically but if I switch off BT in phone and switch it on again - it doesn't connect any more. I had this since I bought a phone and it was on all ROMs I used.
Click to expand...
Click to collapse
Yep - I have that too. The weird thing is that in that situation the phone does seem to think it is connected, while it really isn't. Just to be clear: this is not the only way to cause this issue (because it also happens when trying to reconnect the Bluetooth while on the phone it hasn't been disabled in the meanwhile).
So far I haven't been able to pull anything related from the logcat.
Also, while reading up on common bluetooth issues, I came across some posts of people who were saying that some phone/carkit combinations are having trouble with 2-way communication (because I can stream music from the phone to the carkit, but I can also change a song using the carkit or initiate a phonecall from the carkit). I'm going to try to only use communication initiated from the phone, and see whether that makes any difference. In the meanwhile: does anyone happen to know anything about 2-way communication issues with bluetooth, and how to overcome such issues?
Update:
- Updated carkit to latest firmware. No change, still same problem
- Have not been able to capture anything unusual in the logs
- I have a Bose Soundlink now, which is a wireless speaker. Whenever my S3 is connected to the Soundlink (with bluetooth), wifi doesn't work. Upon turning off bluetooth, wifi instantly works fine again. So this definitely confirms this is a problem with bluetooth on the phone, not on the carkit.
- Wanted to upgrade to Android 4.1.2 but Samsung won't let me, as it says the device is modified (rooted). Triangle away isn't helping. Damn you, Samsung. This is *the* reason I moved away from Apple, as I don't like companies who don't let you use your stuff any way you like. And now Samsung is moving down the same route. Idiots. Anyway, I guess the only option left, is to start using a custom ROM.
Does anyone happen to have experience in terms of solving bluetooth problems by using a custom ROM? I'm thinking of using Cyanogenmod 10.1
In the meanwhile I have upgraded to Android 4.1.2: still the same problem.
I have also discussed this matter with quite a few other Samsung smartphone owners, and all of them appear to be having the same issue. Most of them just don't seem to be bothered to spend time on looking for a fix.
Also, I have figured out that this problem is specific to media streaming. I'm able to use my phone on the carkit for calls at any time, without having to reboot first. Only when I try to listen to music, the problem occurs.
Anyway, I have ruled out that this problem is specific to me or my devices - this appears to be a global issue. So I'm completely puzzled as to why there's not a lot more fuss going on about this.
If anyone has any more suggestions for a resolution of this problem, please share.
S3 bluetooth connection problem
Had the same problem with my S3 and renault megane III handsfree bluetooth system.(Arkamsys software version 2.2.0.19 auditorium)
I downgraded to 4.0.4 baseband I9300CELH1 (stock) and problem seems fixed
hope this helps.
Hi Bennes,
Thank you for your response.
I'm still dealing with this problem myself. All upgrades so far haven't made a difference. So far, I've been able to figure out that if I first initiate a phonecall, after hanging up, the audio streaming works (while before the phonecall it usually wouldn't). This works about 8 out of 10 times (the other 2 times it doesn't make a bluetooth connection at all). So what I've done, is to use Tasker and to automatically make it call my own phone number whenever bluetooth gets connected to the carkit, and hanging up after 3 seconds. But this is obviously far from ideal.
Do you know whether it is possible to change the baseband version without changing the firmware version? I wouldn't like to downgrade to an older firmware version, as I like the new features in the newer versions. I do also prefer to stick with the stock firmware, but that's not a requirement.
Carkit bluetooth issue
Apoc_ said:
Hi Bennes,
Thank you for your response.
I'm still dealing with this problem myself. All upgrades so far haven't made a difference. So far, I've been able to figure out that if I first initiate a phonecall, after hanging up, the audio streaming works (while before the phonecall it usually wouldn't). This works about 8 out of 10 times (the other 2 times it doesn't make a bluetooth connection at all). So what I've done, is to use Tasker and to automatically make it call my own phone number whenever bluetooth gets connected to the carkit, and hanging up after 3 seconds. But this is obviously far from ideal.
Do you know whether it is possible to change the baseband version without changing the firmware version? I wouldn't like to downgrade to an older firmware version, as I like the new features in the newer versions. I do also prefer to stick with the stock firmware, but that's not a requirement.
Click to expand...
Click to collapse
mmm, don`t know about baseband only. Try google.
I have read that after downgrade to 4.0.4 and then upgrade again to latest stock version, bluetooth connection keeps working.
I cannot confirm this as i am still on 4.0.4, but will get an update of the arkamsys radio to the latest renault firmware version next week and then start experimenting again. i will report back once i have new results
Bennes18 said:
mmm, don`t know about baseband only. Try google.
I have read that after downgrade to 4.0.4 and then upgrade again to latest stock version, bluetooth connection keeps working.
I cannot confirm this as i am still on 4.0.4, but will get an update of the arkamsys radio to the latest renault firmware version next week and then start experimenting again. i will report back once i have new results
Click to expand...
Click to collapse
BB only, try this :
http://forum.xda-developers.com/showthread.php?t=2106424
Confirmed the update thing, i have updated the S3 to version 4.1.2 BB I9300CEELL1 and have no bluetooth issue whatsoever, car audio still on 2.2.0.19 byt the way
Pretty strange ... , but glad its working !
I have the same issue with a Ford Focus =/
also, while using CM or Omega, the music title never changes.