Hallo,
what can I do to have the following behaviour:
I need to hear an arriving phone call on the mobile device even if I have connectet it to a Headphone (bluetooth or cable). (I often carry the activated bluetooth headphone in my bag but than I don't hear anny call because its only ringing in my headphone)
can anybody help me?
Several options. The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
The 2nd option is to disable A2DP on the phone. There are several apps out there that make this easier than going into Settings. I use a Today screen plug-in called A2DP Toggle, www.teksoftco.com, free. But the version I have is buggy.
The 3rd option is to disable BT on the phone, again there are tools out there that make this easier. A2DP Toggle can be set to also disable BT when you turn off A2DP.
I have never heard of a tool that lets you direct specific notifications to the various outputs but it makes perfect sense. There should be lots of options that we just aren't given in WM, like keeping the phone from turning off the backlight during a phone call.
The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
Click to expand...
Click to collapse
The problem on this way is, that it takes some time to turn the BT headphone on. So I sometimes lost a call, because I was to slowly...
My BT Headphone has a standby Time from more less 5 days! - so battery is no problem.
The way to disable A2DP brings that I can't use e.g. Voice Command over BT Headphone, isn't it?
So maybe there is no solution for my problem?
(The Athena cant "talk" quit... so I need the Headphone, when I get Calls - I don't like that everybody how is around me hear what the "caller" tells me...)
Over the weekend I had headphones plugged into my phone with music streaming (via TCPMP) and a call came in. It switched the audio over to the external speakers, then paused it, and played the ring tone over the external speakers.
Just what you wanted, right? I'm using the AP4 ROM, don't know if that is the difference or just using TCPMP.
I am sure this may be an issue for some people. my car stereo has bluetooth that links with my phone and mutes the car stereo and turns on speaker phone when a call comes in. i like the fact that it mutes the stereo since i usually have it very loud, but my problem is i cant set it to default to the phone earpiece and not the speakerphone, even when i answer a call and press the button to keep it on the ear piece, it switches right back to the stereo a second later, i press it again and it stays on the phone. i have had this issue with all my other phones as well and it drives me nuts. is there anyone who can come up with a fix for this?
i appreciate any input anyone may have on this.....
thanks
It is not a problem with the phone, it is to do with bluetooth profiles as they are designed to communicate with TWO devices not THREE. I also use car stereo for playing my music. I do not get that many calls while driving so I never use my bt headphones.
Moved to proper forum.
sorry about posting in the wrong forum. I am only trying to get it to default to the handset when i pick up a call. i do not use it to play music, so i have no need for that to even be an option, i just want to be able to pick up a call on my phone, and have it stay on my phone while it uses the bt link to mute and un mute the stereo. i find the speakerphones in car stereos to be totally worthless for talking, but i find the mute feature very useful.
There goes my first pos heret:
Recently I have bought an international SGS3 branded by T-Mobile and it is currently running I9300XXBLFB (ICS 4.04). Some time before that I have also bought a Belkin headphone adapter. What it does is that it basically provides a microphone and a standard 3.5mm jack port for the headphones of your choice. It also has a small 3button Apple like remote (answering button and +/- loudness controls). Good idea for someone who loves his headphones, which don't come with a microphone. It also comes with a TRRS ending typical for Apple.
The adapter worked ok on my Samsung wave with a TRRS switch (loudness control of course didn't work at all, but answering did; loudness doesn't usually work on anything but iCrap). It also seemed to work on my SGS3 at first, but without the switch (TRRS layout is the same as in Apple).
When plugged in I get a notification that headset is recognized, when I make a call the microphone works, headphones work and the answering button is able to stop the phone call. When not in a phone call the answering button starts and stops the music player, so again kind of a standard behaviour.
Now the fun part starts when I answer a phone call with the answering button. The call gets picked up BUT the headphone icon at the notification disappears (behaves like the headphones would get unplugged) and the microphone in the headset doesn't work anymore. I also am not able to drop the call and after I drop it with the phone itself the music switch via the headset doesn't work. Detaching and attaching the headset via the 3.5mm port again gives the headset icon back.
I compared it with two other headsets: stock and Thermaltake Isurus headset.
Both of them behave correctly when I answer a phone call. Both remotes work correctly as well, I am able to pickup and drop calls and the headset icon stays where it should.
Anyone has any ideas what may be wrong with the Belkin headset adapter? Or why SGS3 behaves so strangely with this accessory in particular? Anyone encountered this before?
Ok with any other phone I have owned in the past I have been able to plug it in my aux jack in my car to stream music but use my BT to make/take calls. The music would pause during the call and when the call ended it would resume playing through the headphone jack.
The S4 refuses to do this, it is extremely a special kind of retarded.
I have researched CSC feature.xml and others/xml codes and build.prop
What is needed to make this work?
I dont want to use LINK as I feel it is just another layer added to what is not needed. I just want it to work like the GNex, N4, DX, Dinc, D1, D2, Charge, and all the other android phones I have owned in the past running both stock (rooted/unrooted) and CM based roms.
Anybody have an idea on what is needed?
What exactly is it refusing to do? Pause when you get a call? What music player (the player must respect the media intents to pause/mute and that has nothing to do with the phone/ROM in that respect).
If something is plugged into the headphone jack and I have a bluetooth device paired and on. When a call comes in it goes through the headphone jack and through bluetooth. If I unplug the cable from the headphone jack then it allows me to use bluetooth to take our talk on the call.
This is the only phone I have owned that does not allow me to pay music through the headphone jack and take calls through bluetooth without having to unplug the cable from the headphone jack.
Sent from my SCH-I545 using Tapatalk 4 Beta
I have the exact same issue with my Samsung S4 and have previously used the HTC Thunderbolt without any issue in my car the same manner.
Somehow the BT audio and mic becomes disabled during calls while the headphone jack is plugged in, if there is a way to enable this and disable audio from the headphone jack that would be the solution. So far I have not found a way to do this through any of the settings, very disappointing. It may need a programmatic solution unfortunately...
The sound quality from aux to bluetooth is minimal....why not just use bluetooth? Your making more work for yourself. You'll get calls...the audio will mute...then resume when calls end. I do this in my car...sounds and works just fine.
Sent from my SCH-I545 using Tapatalk 2
chrishoyt2012 said:
The sound quality from aux to bluetooth is minimal....why not just use bluetooth? Your making more work for yourself. You'll get calls...the audio will mute...then resume when calls end. I do this in my car...sounds and works just fine.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Guessing they don't have Bluetooth built into their cars. They are using a headset for calls and an aux jack for music.
Sent from my SCH-I545 using xda premium
Exactly... If u wanted my calls to route through my car I would not mind this. I take my calls privately and thus why I do it this way. I know I can setup multiple bluetooth devices and disable phone on one of them. But I have not found a bluetooth adapter to my liking yet.
Sent from my SCH-I545 using Tapatalk 4 Beta
Bluetooth not working correctly
This is definitely a bug on the s4. In the car I have Bluetooth and an aux Jack. The phone connects fine to Bluetooth and works as long as I'm not using the aux to play music in the car. If I'm listening to music through the aux/headphone jack and I get a call. Bluetooth recognizes the call, music on the phone stops playing, but when I answer, I cannot hear anything. If I unplug the headphone jack I can hear the call. This has been tested on different cars, different roms including stock, and always worked fine on previous phones. Can anyone help? It's easy to reproduce, not sure why more people haven't noticed.
Unfortunately, from what I read somewhere, this isn't a bug, it was intentional by Samsung.
I'm in the same boat, I use BT for my calls in the car, but the headphone jack for music out. If there's a cable plugged in, you can't even manually force a BT connection, it's grayed out and unavailable. Unplug the jack, and BT kicks in and picks up the call. Very inconvenient to say the least.
Any way around this?
I also have a question about how the Samsung will work with this in mind. In the past I have used a Motorola cable that has a micro usb plug on the phone end, and a full size usb and a 3.5mm aux out jack on the other. It allowed me to charge the phone and take the music out when docked in the car. Would this work with this phone? Has anyone tried it yet?
Here is a link to the cable I'm talking about.....
http://www.ebay.com/itm/Motorola-Ca...c-3-4-Atrix-Photon-Q-/360549195891#vi-content
MonkeyTime said:
Unfortunately, from what I read somewhere, this isn't a bug, it was intentional by Samsung.
I'm in the same boat, I use BT for my calls in the car, but the headphone jack for music out. If there's a cable plugged in, you can't even manually force a BT connection, it's grayed out and unavailable. Unplug the jack, and BT kicks in and picks up the call. Very inconvenient to say the least.
Any way around this?
I also have a question about how the Samsung will work with this in mind. In the past I have used a Motorola cable that has a micro usb plug on the phone end, and a full size usb and a 3.5mm aux out jack on the other. It allowed me to charge the phone and take the music out when docked in the car. Would this work with this phone? Has anyone tried it yet?
Here is a link to the cable I'm talking about.....
Sorry,I haven't tried that cable. Do you know why Samsung is doing that? I've had multiple phone including the galaxy nexus by Samsung abd never had this issue.
Click to expand...
Click to collapse
Can't just deselect the "media" (a2dp) profile for your vehicle?
Sent from my device that can send.
I just noticed the same issue with my aux plugged in for music and BT for phone and received a call but could not hear anything. Could make and end calls but no sound in my car.
Seems like both get disabled when a call comes in and the phone is paired. Unplug the aux and BT works for calls fine.
I did some research and ending up purchasing Sound About Pro from the market for $2.99 and it solved the problem. It lets you force the calls to BT or AUX for that matter.
And yes, it still pauses the music and resumes when call is done.
$2.99 to fix a Samsung problem stinks but it works now
NilsP said:
I just noticed the same issue with my aux plugged in for music and BT for phone and received a call but could not hear anything. Could make and end calls but no sound in my car.
Seems like both get disabled when a call comes in and the phone is paired. Unplug the aux and BT works for calls fine.
I did some research and ending up purchasing Sound About Pro from the market for $2.99 and it solved the problem. It lets you force the calls to BT or AUX for that matter.
And yes, it still pauses the music and resumes when call is done.
$2.99 to fix a Samsung problem stinks but it works now
Click to expand...
Click to collapse
i know this is an old thread but i first want to say THANK YOU! ive been looking for a solution for this issue for a long time..
if you dont mind...could you tell me what your settings are?
i got it playing through bluetooth with headphones plugged in but sometimes, later on when plugging head phones in again, it will play through speaker unless i turn soundabout off via its widget
djcyph said:
i know this is an old thread but i first want to say THANK YOU! ive been looking for a solution for this issue for a long time..
if you dont mind...could you tell me what your settings are?
i got it playing through bluetooth with headphones plugged in but sometimes, later on when plugging head phones in again, it will play through speaker unless i turn soundabout off via its widget
Click to expand...
Click to collapse
I took all the defaults and just turned off A2DP
NilsP said:
I took all the defaults and just turned off A2DP
Click to expand...
Click to collapse
so with the defaults and A2DP turned off you can make your calls without unplugging cable...and do you use widget to turn it on and off or does everything else work normally with it on as well? i had phone call audio set to force bluetooth and sometimes after unplugging aux cable then going to headphones it would play through speaker until i switched widget off...will try with defaults when in car again, just curious how it works with you..
thanks
djcyph said:
so with the defaults and A2DP turned off you can make your calls without unplugging cable...and do you use widget to turn it on and off or does everything else work normally with it on as well? i had phone call audio set to force bluetooth and sometimes after unplugging aux cable then going to headphones it would play through speaker until i switched widget off...will try with defaults when in car again, just curious how it works with you..
thanks
Click to expand...
Click to collapse
Correct. All works like it should until you force something. As a matter of fact just try it without changing anything. I let app decide
NilsP said:
Correct. All works like it should until you force something. As a matter of fact just try it without changing anything. I let app decide
Click to expand...
Click to collapse
thanks bud...will try
update...seems to be working great with default settings...didn't even have to purchase premium, think i might just because i was about to buy a bluetooth transmitter to fix this
I tried sound about and one problem I'm having is when using headphone jack for music and bluetooth for calls it won't play audio for voice dialing through bluetooth but once you make the call it goes to bluetooth. I use Google for voice dialing much faster than svoice. Seems like the first time it works then later after playing music it doesn't. Any setting I should change in sound about
Sent from my SCH-I545 using Tapatalk
I updated to oc1 with nk4 boot loader and now the headphone jack doesn't disable Bluetooth. Sweet.
Sent from S4 using the better than it was then they jacked it again Tapatalk
Hi, I have had the problem that i was unable to resume my music during a workout when my bt headphones got into standby (and the music paused). I have tried several button combinations such as double tap, hold for a few seconds, single tap, etc, where as nothing really worked.
did i mess out something??
Are your headphones stereo, with support to AVCTP? When I tested my Pace with a mono headphone it didn't work for music control, as it doesn't support AVCTP, but my stereo headphones worked well. I am not sure if it works if the headphones disconnect during an activity (I've never seen one going in standby mode, mine are either on or off), but if you don't hear the connected sound after it goes on again, then it won't work.
lfom said:
Are your headphones stereo, with support to AVCTP? When I tested my Pace with a mono headphone it didn't work for music control, as it doesn't support AVCTP, but my stereo headphones worked well. I am not sure if it works if the headphones disconnect during an activity (I've never seen one going in standby mode, mine are either on or off), but if you don't hear the connected sound after it goes on again, then it won't work.
Click to expand...
Click to collapse
stereo phones, i guess they were connected again, but i can't say for certain