Hi, I have had the problem that i was unable to resume my music during a workout when my bt headphones got into standby (and the music paused). I have tried several button combinations such as double tap, hold for a few seconds, single tap, etc, where as nothing really worked.
did i mess out something??
Are your headphones stereo, with support to AVCTP? When I tested my Pace with a mono headphone it didn't work for music control, as it doesn't support AVCTP, but my stereo headphones worked well. I am not sure if it works if the headphones disconnect during an activity (I've never seen one going in standby mode, mine are either on or off), but if you don't hear the connected sound after it goes on again, then it won't work.
lfom said:
Are your headphones stereo, with support to AVCTP? When I tested my Pace with a mono headphone it didn't work for music control, as it doesn't support AVCTP, but my stereo headphones worked well. I am not sure if it works if the headphones disconnect during an activity (I've never seen one going in standby mode, mine are either on or off), but if you don't hear the connected sound after it goes on again, then it won't work.
Click to expand...
Click to collapse
stereo phones, i guess they were connected again, but i can't say for certain
Related
Hi All
I have been told by o2 that the following is a feature:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker.
Is this a feature or a fault?
Comments gratefully received
I'd say bit of both.
I've had my headset plugged in and heard the ringtone through both the headset AND the unit itself, but perhaps there's a way of making it so that the headset is the only audio (perhaps plugging the jack in whilst on silent then turning it back up?).
I've definitely had the headset ring out whilst the jack is connected.
A
Feature or fault, that's a hard one to call!
I would say it working as designed, since the headset will always override the speaker in any fashion. :wink:
I've never heard of this. All the US units ring in BOTH if the headset is plugged in. Unfortunately, message notification and alarms sound only in the headset though.
Hi,
As far as I have found out the behavior is not consistent. My device sometimes only ring in the headset and sometimes ring both. I have found out if you plug in the headset and connect via USB cable to the PC it will always ring both in headset and speaker. This is true even after you have unplugged the USB. Seems to me some flag I set during USB connation that enables this... ?!
For notifications - this only works via the headset... for me at least.
I find this annoying - the SmartPhone works as it should in regards to this.
I run 4.00.05 baked at this site... keep up the good work !
I had this similiar feature/bug experience too.
My XDA rings both on the headset and its speaker. One day, at some point, I managed to put it into a strange state. I started playing an mp3 with the windows media player (WMP) without the handset, it played thru its speaker (that's correct). And then I plug in the headset, mp3 came out from only the headset (that's correct too).
After that, I pressed "stop" the mp3 in the WMP, and then "play" again, mp3 came out thru both the headset and its speaker.
I don't seem to be able to reproduce this "feature" anymore now. Well, of course, that's after a reboot a while later.
In fact, now I've got a question then. Does that mean the on/off of the speaker can be controlled in software? AFAIK, like the iPAQ, it's controlled in the hardware, that means if you plug in a headphone, the speaker of the unit will be off.
Does that mean the on/off of the speaker can be controlled in software?
Click to expand...
Click to collapse
Yes, evidenced by the phone behaviour. Most devices use a simple contact in the headset connector to disengage the speaker, but obviously not the PE.
DP00PM said:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker. Is this a feature or a fault?
Click to expand...
Click to collapse
I would rather ask it to be a user defined option. I believe the current setup (both ringing) came after noticing that you can simply forget your headset plugged in so you may miss some calls.
But in some situations (ex: meetings) I would like to keep the headset plugged in and get the rining only through it.
I just experienced a bug. I got in mij car, enabled bluetooth and stared the enging. I could hear the touch cruise connect to the parrot bluetooth carkit (usually it beeps twice, now it beeped 4-5 times).
I fired up my TomTom, instructions were given over the speakers of my car stereo (via carkit)!! I did some testing with other audio files, all worked over speakers.
Quality wasn''t sufficient for audio, but e-books and podcasts sounded good enough.
After a few minutes of playing arround I received a call, after hanging up the call the usual way on the carkit shut down the possibility to hear audio over the car speakers.
Anybody know a way to force audio over the car speakers through the handsfree??
Try this tool:
it sends all the audio signals to the headset (or BT Carkit)
Would it be possible to switch bluetooth audio on just when there is a sound to play, cause it seems a little bit useless to hear nothing when my navigation has nothing to say..
Hallo,
what can I do to have the following behaviour:
I need to hear an arriving phone call on the mobile device even if I have connectet it to a Headphone (bluetooth or cable). (I often carry the activated bluetooth headphone in my bag but than I don't hear anny call because its only ringing in my headphone)
can anybody help me?
Several options. The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
The 2nd option is to disable A2DP on the phone. There are several apps out there that make this easier than going into Settings. I use a Today screen plug-in called A2DP Toggle, www.teksoftco.com, free. But the version I have is buggy.
The 3rd option is to disable BT on the phone, again there are tools out there that make this easier. A2DP Toggle can be set to also disable BT when you turn off A2DP.
I have never heard of a tool that lets you direct specific notifications to the various outputs but it makes perfect sense. There should be lots of options that we just aren't given in WM, like keeping the phone from turning off the backlight during a phone call.
The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
Click to expand...
Click to collapse
The problem on this way is, that it takes some time to turn the BT headphone on. So I sometimes lost a call, because I was to slowly...
My BT Headphone has a standby Time from more less 5 days! - so battery is no problem.
The way to disable A2DP brings that I can't use e.g. Voice Command over BT Headphone, isn't it?
So maybe there is no solution for my problem?
(The Athena cant "talk" quit... so I need the Headphone, when I get Calls - I don't like that everybody how is around me hear what the "caller" tells me...)
Over the weekend I had headphones plugged into my phone with music streaming (via TCPMP) and a call came in. It switched the audio over to the external speakers, then paused it, and played the ring tone over the external speakers.
Just what you wanted, right? I'm using the AP4 ROM, don't know if that is the difference or just using TCPMP.
Has anyone gotten this phone to work playing music through your car stereo through Bluetooth?
I'm paired fine and calls come through stereo, but music still comes through phone speaker. My gf isn't around atm or i'd ask her(she got her HD7 to do bluetooth music on my stereo).
I at least know that once it's paired, it's a phone setting.
I have mine paired with my Sony Bluetooth car stereo and it plays fine. I did have one instance where it played through the phone speaker but it corrected itself the next day.
Sent from my ADR6425LVW using XDA App
There should be an option depending on what music player you are using to determine what output you are using. Kinda like if you had a bluetooth earbud, you wouldn't want to play music through it, just receive your calls through it.
ANGERisMYgift said:
I have mine paired with my Sony Bluetooth car stereo and it plays fine. I did have one instance where it played through the phone speaker but it corrected itself the next day.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
So all you did was just pair, started music player, then it automatically went through Bluetooth?
No matter what I do, it just keeps going through phone speaker(only calls go through Bluetooth). I've tried with default music player and poweramp.
I don't have anything bluetooth to try, but there are no options at all to choose output path either in BT or Music player?
ANGERisMYgift said:
I have mine paired with my Sony Bluetooth car stereo and it plays fine. I did have one instance where it played through the phone speaker but it corrected itself the next day.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
AtLemacks said:
I don't have anything bluetooth to try, but there are no options at all to choose output path either in BT or Music player?
Click to expand...
Click to collapse
Under advanced Bluetooth options there is one labeled FTP Server which I believe you need to have on in order to stream music. Hmm... Tried turning Bluetooth on and off on both the phone and stereo, even rebooted phone. Blah!
voxigenboy said:
Under advanced Bluetooth options there is one labeled FTP Server which I believe you need to have on in order to stream music. Hmm... Tried turning Bluetooth on and off on both the phone and stereo, even rebooted phone. Blah!
Click to expand...
Click to collapse
When you pair a headset that is stereo capable, it will pair to 2 things, phone audio and media. Have you tried to unpair and pair and see if that fixes it?
I have paired my Rezound with a set of bluetooth stereo headphones and also with my car stereo. I have noticed that the media audio connection is intermittent. It always *says* that it is connected to media audio, but sometimes the sound comes out of my phone speaker anyhow. I have not figured out how to fix this. It seems to happen randomly (more frequently with my car stereo than with the headphones, but it has happened with both). All I can recommend is to go into a Disconnect/Unpair/Pair/Connect loop until you get it to work. It might also help to power cycle your phone. I just did that last night and it paired and connected properly with my car stereo this morning.
This all of course assumes you have checked "Media" under the options screen for the device with which you are pairing.
AtLemacks said:
I don't have anything bluetooth to try, but there are no options at all to choose output path either in BT or Music player?
Click to expand...
Click to collapse
If it behaves like any other Android phone, when it links up to a bluetooth connection with the audio profile enabled, it should automatically route it's sound to bluetooth, there's no setting in the music player to toggle that.
bfhunt2009 said:
I have paired my Rezound with a set of bluetooth stereo headphones and also with my car stereo. I have noticed that the media audio connection is intermittent. It always *says* that it is connected to media audio, but sometimes the sound comes out of my phone speaker anyhow. I have not figured out how to fix this. It seems to happen randomly (more frequently with my car stereo than with the headphones, but it has happened with both). All I can recommend is to go into a Disconnect/Unpair/Pair/Connect loop until you get it to work. It might also help to power cycle your phone. I just did that last night and it paired and connected properly with my car stereo this morning.
This all of course assumes you have checked "Media" under the options screen for the device with which you are pairing.
Click to expand...
Click to collapse
My car has the option for bluetooth media and when I sync'd the phone to the car last night for the first time it worked flawlessly I didn't have to to anything special. I don't think it's a problem with the phone, maybe the car stereo?
I suspect the phone since I've seen the same intermittent problem both with my car stereo and my headphones. Plus I never had any problem with my original Droid with both those devices.
Sent from my ADR6425LVW using XDA App
Update: did a plain old pair with the HTC HD7 again and the music came through the stereo just fine. Tried again with the Rezound and still keeps going through the phone speakers. Oh well... My fault for trusting HTC.. ;P
Anyone experience this? connected to the car bluetooth, but when i off the infotaintment and stop the car, the music continue playing using the phone speaker. H'mmm not a bit issue but very troublesome to stop what is playing every time
I read in a review that there's a setting you can change which lets you have music continue playing after removing headphones or have it automatically pause, I believe this setting will also affect bluetooth audio as well, perhaps this will help? I can't say if it is this though, I haven't got mine yet but it will be good for me to know too as I connect my phone to my car's stereo via bluetooth and will do the same with the Z2.