I have encountered a problem sending SMS to more than one contact in the To: field. The message is sent to outbox and remains there. Sometimes it says to "Your SMS message has not been sent, verify that you have network coverage and then try sending the message again."
Any comments/solutions??
Multiple SMS recipients II
Forgot to mention that I am running:
ROM version: 4.00.01
Radio version: 4.21.0
Protocol version: 32S54
Related
Does anyone have try this ArcsoftMMS MMS for magneto BY NCRUZ ON XDA-DEV?
1. Download AMmsC_XDAII_WM2k5 here
http://tofclok.free.fr/WM2005/AMmsC_XDAII_WM2k5.rar
2. soft reset my device
3. copy .dll to windows folder
4. install cab file
5. soft reset again
6. at this step I look in inbox --> no MMS)
7. go to menu > new account
8. step 1: set email to [email protected]
9. step 2: check the connection(I skip it)
10. step 3: name e ; user e ; password e
11. step 4: change to MMS account
12. step 5: INcoming mail ??? ; outgoing mail ??? ; domain ???
13. and then I check my inbox there is still no MMS account
14. Try to send and receive MMS & please tell me what the result... :?: :?:
for me:
Send MMS:
"Unable to send your message(s). Your Message(s) will remain in the outbox"
Receive MMS :
- Bubble Receiving MMS header in the Inbox appear but when i download MMS....
"Unable to Receive your message(s). Your Message(s) will remain in the inbox"
There is nothing wrong with my MMS setting but :twisted: :twisted: :evil: :twisted:
I have the same problem
the 1st time i setup a new mms account was a failure too, so i created another one. this time it worked & i have two mms accounts?
anyway, i did a clean install of 1.60c & followed the steps you mentioned (except 12. step 5, i placed "e" not sure if it matters at all?), mms account created the 1st time! i tried to send to my own cell number & received/download alright.
btw, i'm in indonesia too & using satelindo matrix. just for info if it would be of any help.
cheers!
rhmartin said:
the 1st time i setup a new mms account was a failure too, so i created another one. this time it worked & i have two mms accounts?
anyway, i did a clean install of 1.60c & followed the steps you mentioned (except 12. step 5, i placed "e" not sure if it matters at all?), mms account created the 1st time! i tried to send to my own cell number & received/download alright.
btw, i'm in indonesia too & using satelindo matrix. just for info if it would be of any help.
cheers!
Click to expand...
Click to collapse
well i will try with my Satelindo Matrix ASAP... i hope it works... :roll:
audio
I got the ArcSoft MMS Composer 3.0.0.25 to work in principal. However, it appears that the audio objects are not properly imbedded. Everything seems OK until the message is really sent. After sending, when the message is moved to the "Sent Items" folder, the audio object still appears under objects, but there is no sound when I play the entire message. Message received do not show any audio objects under objects, but the tex field includes a string <<sound.wav>> if the name of the audio object was sound.wav? Any idea?
help
Will somebody please explain to me...
I can make the MMS account and that but nothing is sent or received.
Please
Be sure to configure the server correctly.
Menu -> MMS Configuration ->Servers
You should get the data from your provider.
For my provider A1 in Austria I use
Server name: A1.net
Gateway: 194.48.124.71
Port number: 9201
Server address: http://mmsc.a1.net
Connect via: My ISP
Sending size limitations: 250K
WAP Version: WAP 1.2
Thanks!!
amazing!
thanks a lot. I just test sending myself a message and it works!!
But... (damn, why?)
I sent myself a message with a picture and the picture didnt came with the message, I just see a blank message and nothing more.
Did you receive this same thing?
I'm trying to configure the wspheader settings in my registry for Arcsoft v5. Having a hard time understanding exactly what value to type and what string(s) to create. I know this might sound stupid and somewhat silly to must of you, but you someone shed some light on me?
Thanks!
Anyone? Lol.
These should be your MMS settings in your registry.
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"SaveSentMessage"=dword:1
"Domain"="http://mms"
"CountryCode"=dword:1
"EnableRemoveCountryCode"=dword:0
"EnableSaveAudioObject"=dword:1
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Alltel MMSC]
"WAP1RecvDefaultSize"=dword:19000
"WAP1SendDefaultSize"=dword:19000
"PacketSize"=dword:3E8
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"WAP2SendDefaultSize"=dword:4B000
"WAP2RecvDefaultSize"=dword:FA000
"WAPType"=dword:1
"GatewayPort"=dword:1F90
"MmscURI"="http://mms.alltel.com/servlets/mms"
"Gateway"="mms.alltel.com"
"Name"="Alltel MMSC"
"ISP"="Alltel MMSC"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Alltel MMSC"
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"Accept"="*/*"
"User-Agent"="Titan"
"Profile"="http://www.htcmms.com.tw/gen/Titan-1.0.xml"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2"
"Accept-Language"="en"
"hmac-md5-key"="ph1uzoe52iuw"
That may or may not be in there already...I'm not sure if dcd removed that stuff from the carrier package cabs yet. If it is, leave it alone, if not you must enter it in. The entries that say dword are integers not strings.
Once that's all in you must navigate to HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader and create a new string called X-Alltel-MDN. Set its value to your 10 digit phone number.
Alright, did the changes using registry explorer, added the string, soft reset the phone, I tried sending an MMS to myself to verify the integrity of it. I'm getting the following error:
Warning!
Unable to send your message(s). Your message(s) will remain in the drafts folder.
Adding manually right now, will let you now how it works. Thanks!
Finished adding everything. Still no luck sending the MMS Message. Keep getting the same error code
Gelial said:
Finished adding everything. Still no luck sending the MMS Message. Keep getting the same error code
Click to expand...
Click to collapse
that message means you have NO data connection at all setup... Run the ALLTEL cab that DCD posted on the 1st post, that should provision a connection for you....
That cab has already been installed. I can browse the web and everything in my 6800 without a problem.
I really confused about how to configure MMS client in this phone (actually since I use WM5 on my mpx200).
This is the setting for my operator.
Access Point Name : mms.indosat-m3.net
Username : mms
Password : im3
IP address (WAP Gateway ??) : 010.019.019.019
Homepage : http://www.mmsc.m3-access.com
Where should I enter these configuration ???
I'm curently using WM6.1 by GantGoSplat
I downgrade my phone again to WM 5.0 and now the MMS worked.
Hi guys,
I`m facing the problem since last kies update. When I connect device via wi-fi to PC, kies air message show notification that device is connected and everything is perfect, but when I try to compose message or explore a contacts, I receive an error with "service not responding" -> "check solution online and close program". Tried to install older version of Kies, but it didn`t help.
I`m running W7 and JB 4.1.1 on mobile.
Can anyone suggest something?
Oh almost forgot, here`s log:
Problem signature:
Problem Event Name: BEX
Application Name: KiesAirMessage.exe
Application Version: 1.0.0.0
Application Timestamp: 5091e8cf
Fault Module Name: KiesAirMessageCtl.dll
Fault Module Version: 1.0.0.0
Fault Module Timestamp: 5091e8c9
Exception Offset: 000ea027
Exception Code: c0000417
Exception Data: 00000000
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1063
Additional Information 1: 0702
Additional Information 2: 07026e53635cb069580e8f0fa78513c7
Additional Information 3: ed87
Additional Information 4: ed874063ade0aa215128db54538f175e
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Hi,
I am having trouble getting exchange accounts to work in Gmail in Android 5.0.1
Pre-lollipop update we were using the onboard android mail client with no worries, keen for the gmail integration we upgraded to gmail where we discovered we cannot download or send attachments greater than 5mb when using an exchange account in gmail.
When downloading an attachment I get the following error "Couldn't download. Touch to retry."
When attaching a 5mb file I get "Can't attach file over 5mb."
The debugging I have done:
Files over 5mb can be downloaded/sent over wifi
All settings related to limits have been disabled
I have checked the exchange 2007 settings and there is a limit of 15mb set
Removing this limit did not help
Tested downloading an attachment using a gmail account, this was successful
Rolled back to lollipop with no updates: no success
Ensured all apps are OS is up to date
3rd party apps such as 'outlook' have no issue
I am able to download attachments greater than 5mb using OWA
I have tried multiple file types including PDF, ZIP and JPEG
Confirmed accounts are still working on email clients pre-gmail integration
Not getting anywhere from this I rooted a test phone and got the following information from logcat when attempting to download an attachment:
Code:
W/AttachmentService( 2363): Attachment #346 is not eligible for download
W/AttachmentService( 2363): Attachment #346 cannot be downloaded ever
I/ConvLayout( 2363): IN setHeight=386px of overlay item: [email protected]
W/AttachmentService( 2363): Attachment #346 is not eligible for download
W/AttachmentService( 2363): Attachment #346 cannot be downloaded ever
I/ConvLayout( 2363): IN setHeight=386px of overlay item: [email protected]
D/audio_hw_primary( 184): disable_audio_route: reset and update mixer path: low-latency-playback
D/audio_hw_primary( 184): disable_snd_device: snd_device(2: speaker)
I/wpa_supplicant( 884): wlan0: CTRL-EVENT-SCAN-STARTED
Vague results here didn't help me that much, is anyone here able to help with this issue I am having?
Unfortunately using a 3rd party mail application isn't a solution I can use for this.
Is this a known bug for the system?
Any help or advice for places to look is greatly appreciated, I have run out of ideas for trying to find what this issue is.
Thankyou