I Need help! I have fast running lines from top to bottom of my xda, no reset or bootloader mode helps - although the little one seem to function in the backrow (it beeps after reset and is recognized by xda-developers toolkit. What can I do?
Re: Need help! Fast running lines from top to bottom of my x
berndbitzer said:
I Need help! I have fast running lines from top to bottom of my xda, no reset or bootloader mode helps - although the little one seem to function in the backrow (it beeps after reset and is recognized by xda-developers toolkit. What can I do?
Click to expand...
Click to collapse
If the same lines also show in the bootloader mode, it is definitely a hardware problem.
You could try checking the connections between the motherboard and the screen, if you feel up to it. Otherwise, it's time to send it in for repairs.
Related
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
alikhan321 said:
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
Click to expand...
Click to collapse
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
the-equinoxe said:
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
Click to expand...
Click to collapse
LOL nice one Eqx
duh
i done that it dont work man i need exprt advice help
alikhan321 said:
i done that it dont work man i need exprt advice help
Click to expand...
Click to collapse
Soft SPL is put to MEMORY, it's not FLASHED.
Rebooting the device will clear the memory.
Thus removing the sSPL.
Try pulling your battery for a few minutes.
Then put it back again and boot the device.
HELP
I Took Out The Battery For 1hr Still The White Screen,help
Took Out Sd Card Took Out Sim ???????????
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
dferreira said:
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
Click to expand...
Click to collapse
That is the exact same advice I PM-ed him.
yes done all that nothing yet just some white screen always on can hear background noices of the phone ,the leds working like normal
please help i love my wizard its been 3 days now my coldrx turkey is very hard now
That's odd... if he can hear the phone start menu going on... maybe you can do it again (use sSPL to flash another ROM). Maybe that will work?
Could it have something to do with DROPPING HIS PHONE instead of the sSPL?
Because the sSPL isn't flashed as I said many times before, it is in MEMORY, not flash..
new screen
i put the new screen in same white screen tested the screen in mda(pic inclosed) so nothing to do with screen
any more ideas
the screen is fine howcan i switch white screen off
to any one who can help
the more you know.....http://www.mdatweak.com/downloads/Wizard_Service_Manual.pdf
make hard reset and then
contecet with ubs and use the SPL again.
its happend to me and i did what i wrote and its worked....
I'm in the same boat! My Wizard is in the stuck white screem as well.
Zpyro said:
I'm in the same boat! My Wizard is in the stuck white screem as well.
Click to expand...
Click to collapse
could you give us more details?
-device (G3/G4)
-what you did (exactly) before you got this white screen.
It is a 8125 (G4) that is unlocked.
I created a ROM from one of the kitchens, and flashed it ... White Screen.
WOO HOO!!! GOT IT!!!
Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.
Enjoy!
I have searched the forums and not found an answer so I am posting a question.
I flashed Aura ROM and been very happy for a very long time then suddenly the notification bar wont pull down.
The only thing I can think of is that I tried to use the Entertainment Dock and, although the phone went into entertainment mode, the TV remained blank, I unplugged and got on with my life.
I have since tried wipe (data/cache/dalvik), reflash Aura, wipe reflash Aura w/Bl, wipe reflash Home, flash update, flash theme, wipe...
After the above I went to restore a previous backup and got an MD5 Sums Mismatch. I repaired the backup and restored...still the problem persists.
Any ideas would be welcome. I am getting concerned that I have managed to ruin a fantastic phone.
I can confirm that there is no problem with the screen, that portion of the screen responds to swipes across and moves the desktop, just not the notification bar.
The really weird bit is that the buttons stop working, if I run my finger across from one side to the other then the screen responds (my home screen moves around).
If I go into landscape then the pull down works but the buttons are still shot and back to portrait doesn't help.
Standby and back seems to fix it (I do not have to power off).
Any help is greatly appreciated.
Thanks
Jez
Quick update (problem persists)
I used multitouch tester to see what was happening when I dragged down the notification bar. When functioning correctly it see's one finger as one. When going wrong it sees the finger at the top of the screen as two / three / four separate presses. When I drag the one finger down the extra points stay at the top. I guess this is why the notification bar doesn't go down.
Jez
Hardware Fault
I have decided that this is a hardware fault and so I am desperately trying to hide the "unlocked" text and return the device
...or brick it in the process
wish me luck...
jezarius said:
I have decided that this is a hardware fault and so I am desperately trying to hide the "unlocked" text and return the device
...or brick it in the process
wish me luck...
Click to expand...
Click to collapse
Just flash a GB SBF to remove the unlocked and you don't have to worry about bricks as long as you don't attempt to flash a froyo SBF. Don't worry if it doesn't boot after flashing the SBF. Just ssend it in. That's what I did.
Sent from my MB860 using xda premium
d3athsd00r said:
Just flash a GB SBF to remove the unlocked and you don't have to worry about bricks as long as you don't attempt to flash a froyo SBF. Don't worry if it doesn't boot after flashing the SBF. Just ssend it in. That's what I did.
Click to expand...
Click to collapse
I actually did the motorola update from their software update tool. It removed the "unlocked" text, put the T-Mobile startup animation back in and soft bricked it.
I have now sent it off for repair...three weeks
Thanks for the comment
Anyone know how to bypass activation on the VZW S3?
I'm having problems activating my device.
ty for the help.
Disregard this post I got my phone activated this morning.
Sent from my SCH-I535 using xda premium
eastwood1 said:
Disregard this post I got my phone activated this morning.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'd like to know how to bypass activation. So I can return the phone is there are screen defects. Isn't there some developer backdoor to use the phone without activating it or setting it up? Thanks..
Bump For Help
+1
I would like to know also, the standard Android 4 corners etc.. don't work.
Also looking to bypass activation
I'm currently in Alaska, and just received my Verizon S3 pre-order. VZW has yet to enter the Alaska market, so I'm on extended network up here, and I knew in advance that I wouldn't be able to activate the phone until I'm in Seattle in early August.
What I didn't expect was a seemingly bulletproof activation screen. If anyone finds a way past this, it sure would be nice to be able to at least play with this phone on wi-fi until I get to a place with coverage.
Thanks!
I don't know if this method will work specifically for your phone but it did with my HTC Incredible on vzw's network.
1. Go through the initial setup stuff and when it gets to the activate your phone click OK.
2. The phone places a call to activate your phone. When the phone connects, hang up on the call.
3. The phone goes back to the activate your phone screen and click OK again.
4. When the phone connects, hang up again.
5. I repeated steps 3 and 4 a couple times and my phone gave up on trying to activate my phone and went to the next prompt screen.
Have you tried the four corners method?
Sent from my MB508 using xda premium
selevine said:
I don't know if this method will work specifically for your phone but it did with my HTC Incredible on vzw's network.
1. Go through the initial setup stuff and when it gets to the activate your phone click OK.
2. The phone places a call to activate your phone. When the phone connects, hang up on the call.
3. The phone goes back to the activate your phone screen and click OK again.
4. When the phone connects, hang up again.
5. I repeated steps 3 and 4 a couple times and my phone gave up on trying to activate my phone and went to the next prompt screen.
Click to expand...
Click to collapse
Thanks, but no luck. The S3's activation is different from any I've seen before. The dialing is all done in the background, and there is no hang-up button. After it places 3 or 4 calls that don't go through, it pops up a message that says it can't activate and offers to restart the phone to try again.
There's no welcome screen to try the 4 corners, and the Konami-esque volume code doesn't work either. ## Codes entered from the emergency dial haven't done anything.
Hey guys,
It’s the same thing as the Galaxy Tab 10.1
On the Language screen (right on the first language) tap top left corner, then top right corner,(above the emergency call and next) then bottom left corner, then bottom right corner, then volume up.
czarbrain79 said:
Hey guys,
It’s the same thing as the Galaxy Tab 10.1
On the Language screen (right on the first language) tap top left corner, then top right corner,(above the emergency call and next) then bottom left corner, then bottom right corner, then volume up.
Click to expand...
Click to collapse
Confirming that this works!
Doesn't work for me. Followed to a t...
Above the emergency/next buttons, bottom left, bottom right, bottom left, bottom right, volume up.
Have you tried the method I suggested ?
I thought this was the new way andcthe four corners thing was the old way.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
czarbrain79 said:
Hey guys,
It’s the same thing as the Galaxy Tab 10.1
On the Language screen (right on the first language) tap top left corner, then top right corner,(above the emergency call and next) then bottom left corner, then bottom right corner, then volume up.
Click to expand...
Click to collapse
That is awesome. Reminds me of the konami code back in the day
Sent from my SCH-I535 using xda premium
Bypass
PIYIRIO said:
Doesn't work for me. Followed to a t...
Click to expand...
Click to collapse
To Bypass the S3 Activation it's very simple,
While in portrait mode of the languges screen
- tap below the last language, Left side - Right Side
- Left Side - Right Side
- Volume up Button.
They made it slightly difficult But thats the bypass for ya
- KARL LUGENBEEL -
swordphsh said:
Above the emergency/next buttons, bottom left, bottom right, bottom left, bottom right, volume up.
Click to expand...
Click to collapse
Just got mine while I'm still deployed overseas. Thanks.
Sent from my Incredible 2 using xda premium
Kglugenbeel said:
To Bypass the S3 Activation it's very simple,
While in portrait mode of the languges screen
- tap below the last language, Left side - Right Side
- Left Side - Right Side
- Volume up Button.
They made it slightly difficult But thats the bypass for ya
- KARL LUGENBEEL -
Click to expand...
Click to collapse
YES! This is it. Do it like he mentioned to a T and youll be fine!
Thanks Karl!
Dear all,
My Xperia phone is really nice and I have been using it for quite a while. However, something happened to my phone about 3 weeks ago. The right side and bottom of my screen has become totally unresponsive and since then, I really had trouble typing letters like 'p', 'l' and 'm', and also pressing space bar and enter. The bottom of my screen is occassionally okay, and I will sometimes be able to type space bar, comma and fullstop as per normal, but it is only sometimes. I have been putting up with it by tilting my phone whenever I type, but recently, I accidentally set a screen lock(password) and since the 'Done' button was at the bottom right of my phone, I am totally unable to press it at all. I tried tilting it, but it seem that the screen would not orientate at all, not before unlocking it. I used the Xperia phone companion on computer to factory reset my phone. Just as I thought that the problem was over, Xperia guide comes up and prevents me from using my phone. Since the 'next' button is located at the bottom right of my screen again, I am unable to press it at all. I tried tilting but it does not work at all and it seems impossible for me to use my phone now. Can someone please help me? Thanks in advance.
Its probably a hardware problem you must change the touchscreen by yourself or bring it so service center
Sent from my MT15i using xda app-developers app
Hi there!
I had the following situation:
My watch first ran out of battery.
Then I waited a long time for a new one to come.
I changed the battery and tried to install firmware via fastboot. Honestly, I don’t remember exactly how it all ended. But it didn’t work out.
And now (after a few months) I decided to try again to solve the problem, but my fastboot menu does not open at all.
As a result, I have a bootloop with 4 icons and that's it.
Can you please advise a solution?
Please, help... Anyone.
I didn't find solution yet....
How to enter fastboot
Keep the power button pressed at the bottom of the watch above the pogo pins. The moment it restarts and shows the LG logo. keep swiping swipe from the top left corner diagonally towards bottom right. Also, the first boot takes a really long time so be wary of that.