Related
wm2003 built-in functionality allows only for making a choice between - ring, vibrate and silence/silent ... no other option allowed
I would prefer to have one additional feature allowing for a/m - useful especially in noisy environment
any ideas ???
regards, monika
not sure if i'm barking up the wrong tree here but
are you talking about when you choose using the icon
on the today screen or inside the phone settings in control panel ?
if you cant choose both in the phone settings in control panel then they changed it since 2002 not sure
monika69 said:
wm2003 built-in functionality allows only for making a choice between - ring, vibrate and silence/silent ... no other option allowed
I would prefer to have one additional feature allowing for a/m - useful especially in noisy environment
any ideas ???
regards, monika
Click to expand...
Click to collapse
You have to configure it at Start->Control-Panel -> Phone.
Here you can say vibrate and ring.
Why aren't you playing little bit with your phone? It isn't very difficult to get this settings by your own...
Regards
Stefan
[/quote]
You have to configure it at Start->Control-Panel -> Phone.
Here you can say vibrate and ring.
Why aren't you playing little bit with your phone? It isn't very difficult to get this settings by your own...
Regards
Stefan[/quote]
ok, let me re-phrase to make sure all do understand :? I want that icon on today screen, that one that regulates the volume which is next to GSM signal reception, and not inside the XDA ... to keep it simple
regards
01/26/09 - This is just a minor update to fix some issues and add a couple small features.
Feel free to give comments or ask questions.
Thanks!
This program is a touch driver to handle the touchscreen presses and vibration. A settings program exists to configure how the vibration works.
Since this is a touch driver, there is no program you need to run to start it.
It has been tested on an HTC Touch and HTC Touch Pro for several days with several stability issues corrected. I am only releasing this now that I feel comfortable that you will experience no major issues. However, I cannot guarantee that it will work flawless for you. I cannot be held responsible for any loss of data or time you may experience while using this.
If you are experiencing problems after installation, please let me know so I can fix these issues.
Features
Global enable/disable option
Vibrate on touch/release
Variable duration of vibrate
Disable during Phone Call option
Disable when device is silent
Disable when device is locked
Disable when stylus is out (for devices that support this option)
Enabled for On-Screen Keyboard only (Temporary option until full include/exclude list is incorporated)
Settings Program->Settings->System->TouchResponse Settings
AppToDate support
Coming Soon
Include/Exclude list for vibration
Different vibration patterns
Resolve any software conflicts
Vibration tweaks
Sound on touch
Vibrate on hardware button press
Multi-language support in Settings program
I'm open to suggestions...
Known Issues
May or may not play well with touchflo/ftouchsl. If TouchResponse isn't working for you, try disabling those if they are enabled.
Disable when device is silent may not work on some devices. Let me know what kind of device you have if this is the case for you.
Donate
This is a free program and I plan on keeping it that way. If you enjoy using it and would like to support its development, please consider donating by clicking here:
Donate $ | Donate €
Change Log
.3.2 (01/26/09) - Minor update
- Option to disable vibration when device is locked
- AppToDate now supported - Download AppToDate to be informed of the latest updates
- Fixed issue when SIP Only didn't work as expected in landscape mode
- Fixed issue when Stylus Out still resulted in vibration when that option was set.
.3.1 (01/14/09) - Minor update
- Should properly upgrade when built into a custom rom
.3 (01/13/09) - More features
- Option to vibrate on release of touch
- Option to disable vibration when stylus is out
- Option for vibration to only be enabled for on-screen keyboard
- Better auto-detection of device model/vibrate id
.2.2 (11/27/08) - More Minor Updates
- Can increment the duration by one instead of five now
- The chance for a longer than usual vibration should be reduced if not eliminated altogether
- Disable while silent option should work a little better now
- Settings program allows for more Vibrate IDs in the Advanced tab
.2.1 (11/26/08) - Minor Update
- Windows Mobile 5 is now supported
.2 (11/26/08)
- Attempt to resolve suspend issues with certain phones - Let me know
- Disable while silent option added - may not work perfect
.1 (11/24/08)
- Initial Release
Questions and Answers
Q. How to I change the settings?
A. Start->Settings->System->TouchResponse Settings
Q. Why do I not see the settings program?
A. For some phones, the settings program does not appear in the control panel. Until I figure out a fix, you can run the program by going to \windows\TouchResponseSettings.cpl
Q. Why is it not vibrating when I touch the screen?
A. Go to the Device tab in TouchResponse Settings. It will display information about your device. If it says to select your vibrate id then find the one that causes the vibrate to work. Send me a PM with the name of your device model along with the vibrate id that works for you and I will incorporate that into future releases.
Q. Will this drain my battery life?
A. I don't have any statistics to show the before and after battery usage. However, I personally have not experienced any significant increase in battery usage. It all depends on how long the vibrate duration is and how often you touch the screen.
Q. Why does the vibrate last longer than it's supposed to sometimes?
A. This should hopefully be resolved as of version .02.2. If you experience this after this version, please let me know when it happens and how often.
Q. Why is the vibration always the same duration no matter what the settings are set at?
A. Use a registry editor to go to HKEY_LOCAL_MACHINE>Software>OEM>VIB and set STRENGTH_LOW to 0. Thanks to agdaniels for pointing this out.
Please don't post this cab on any other site. Let's keep all discussion here. I appreciate your cooperation.
Thank you for your support!
Ill try it and let ya know how it compares
Nice idea, thanks for sharing.
I read about a phone (I think it was LG Incite?) where some people complained about vibrating even when entering text with the soft-keyboard.
Could you give us an option to dis-/enable vibrating when entering text ? Maybe there´s an event you can use when the soft-keyboard flips up...dunno
regards,
Martin
m.schmidler said:
Could you give us an option to dis-/enable vibrating when entering text ? Maybe there´s an event you can use when the soft-keyboard flips up...dunno
Click to expand...
Click to collapse
Since the driver has first crack at the touch event, I should be able to determine which window is being touched and either vibrate/not-vibrate depending on how it's configured. For example, I can see that the SIP is being touched and not vibrate. I'll add that to the list, Thanks!
Just as Martin said.
When typng on the on screen keyboard. Vibrate on every button of the keyboard we pressing. That would be awesome.
Gonna test this on the X1i
It works great on my HTC touch PRO.
Yea Man !!
I love this Apps !!!
Thanks so much
all feature Works like a charm in my Kaiser (HTC TyTN II)
Well I guess I will put my suggestion here as I did with the other 2 programs like it. Would you consider creating a setting to were it is only active on SIP Keyboard AND when SIP keyboard is active I have choice between a vibration or a sound or both?
I know I can get a sound by going to the general settings of winmo but when it is on it makes a noise for all screen taps...annoying!!
CuriousG
curious george said:
Would you consider creating a setting to were it is only active on SIP Keyboard AND when SIP keyboard is active I have choice between a vibration or a sound or both?
Click to expand...
Click to collapse
Since this is a similar comment among everyone I will focus on this next. Thanks everyone for your feedback!
how about different types and lengths of viberations like the old motos used to have? dash-dash-dash-buzzz haha
maybe different intensities if possible?
I've always wanted 'heptic feedback' on my KS20 but non works for me. I've tried Heptick Feedback, Vibration Feedback and now TouchResponse, none work for KS20. Duh....
Can these options be added?
1. Not to vibrate when on silent?
2. Change buzz length (make it shorter/less intense)
3. An "use only when SIP activated" option.
richabi said:
how about different types and lengths of viberations like the old motos used to have? dash-dash-dash-buzzz haha
maybe different intensities if possible?
Click to expand...
Click to collapse
This is something I've been wanting to experiment with. I'll add that to my list, Thanks!
stutzedward said:
I've always wanted 'heptic feedback' on my KS20 but non works for me. I've tried Heptick Feedback, Vibration Feedback and now TouchResponse, none work for KS20. Duh....
Click to expand...
Click to collapse
You may have tried something similar with the other programs you have tried, but you can try changing the Led Id in the Settings program under the Advanced tab. Be sure to press ok to make the settings to into effect. Hopefully it is just a case where the KS20 doesn't use the default Led Id for vibrate.
derekwilkinson said:
Can these options be added?
1. Not to vibrate when on silent?
2. Change buzz length (make it shorter/less intense)
3. An "use only when SIP activated" option.
Click to expand...
Click to collapse
1. Yes, this is something I want to add! It's sometimes hard to go unnoticed when I use my phone in meetings at work when the vibration is loud.
2. Did you see the Settings program in the System tab of the "Control Panel"? Or do you mean a something like a longer buzz but less intense?
2. I'm going to be focusing on that with an include/exclude option next.
Thanks for your feedback!
Snailslug said:
You may have tried something similar with the other programs you have tried, but you can try changing the Led Id in the Settings program under the Advanced tab. Be sure to press ok to make the settings to into effect. Hopefully it is just a case where the KS20 doesn't use the default Led Id for vibrate.
Click to expand...
Click to collapse
Hey hey, it works for KS20 for the first time!!!!
I set the LED from 0 to 3 and hey, 3 works.
0 - LED displays green
1 - LED displays red
2 - LED displays blue
3 - it worked!
Thank you soo much! I gotta spread this on the KS20 thread because a lot of KS20 users are wanting this like me. I'll link them here.
very good work.
i have mine set to 25ms and the vibrate is a perfect length and silentness.
i agree on only sip active and/or blacklist
Just want to echo what's already said. What most ideally want is for vibration to be active ONLY on keyboard when text entering and to be as brief a buzz as possible. Some owners type very fast and we want the buzz to keep up and not still lag on the previous tap while tapping on the next key. It has to be super quick and not miss a key press when typing quickly. Thanks!
Ok, found the settings app, my bad
The other two requests would be awesome if they were to be fulfilled!
whats the difference between this program and this one : http://forum.xda-developers.com/showthread.php?t=425063 ??
Hi to All,
This is my first thread on the site. Forgive me if I do anything wrong.
Introduction
I have been using the auto answer feature on my touch hd and have found it to be very useful especially when driving. However, this feature is not easily accessible when you want to toggle between on and off. I decided to come up with this application (myCar Profile) and I would like to share it with you.
MyCar Profile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This application allows auto answer for incoming calls and automatically turns speakerphone on without pressing any buttons on windows mobile professional devices. I am not trying to replace the default feature but simply making it easier to access and use the feature. I have also made it possible to use auto answer with or without a headset.
The application is not code signed therefore you have to grant access if your device is appication locked.
Tips
1) The application should be running to enable the features to work.
2) The talk after (0-30) seconds should the less than the value set for call forwading otherwise your incoming calls will go to voicemail.
3) Assign a hardware button to the application to allow easy access. (Personally I use AE Button Plus to get more button options, I dont know if there are free alternatives)
4) On exiting the program your phone settings will be retained.
FAQ
Q - I have installed myCar Profile but the app does not answer incoming calls
A - Ensure talk after (0-30) seconds is less than the value set for call forwading otherwise your incoming calls will go to voicemail. Also some lock screen software and call intercepting software may be interfering with myCar Profile. Add the app to the exclusion list or change appropriate settings such as [Don't use KeyBoard Hook = OFF in S2U2.] You may also disable offending software temporarily.
Update - 24-01-2010
MyCar Profile Version 0.6 - [Updated app to remove notification on soft key. Added new menu MINIMIZE ON LAUNCH - this menu enables the application to be minimized automatically on start up. Added new menu SAVE STATUS ON EXIT - this menu enables the application to save talk after seconds, speakerphone & auto answer status (i.e. either ON or OFF). Once saved the status will be loaded on next start up.]
Donations: I created this app for anyone who needs it free of charge. However, if you appreciate my work and would like to buy me a beer click Here. Continue to use the app freely without any obligations.
Previous Versions:
MyCar Profile Version 0.5 - [Updated app to include icon & bubble notification. Added a new menu SHOW NOTIFICATION]
MyCar Profile Version 0.4 - [Updated app to increase compatibility with other software. Added a new menu ENHANCED SPEAKERPHONE]
MyCar Profile Version 0.3 - [Updated app to allow automatic bluetooth headset detection.
MyCar Profile Version 0.2 - [Updated app to allow audio routing to bluetooth headset.]
MyCar Profile Version 0.1
this is so cool bro thank u so much
kuda said:
Hi to All,
This is my first thread on the site. Forgive me if I do anything wrong.
Introduction
I have been using the auto answer feature on my touch hd and ahve found it to be very useful especially when driving. However, this feature is not easily accessible when you want to toggle between on and off. I decided to come up with this application (myCar Prifile) and I would like to share it with you.
MyCar Profile
This application allows auto answer for incoming calls and automatically turns speakerphone on without pressing any buttons on windows mobile professional devices. I am not trying to replace the default feature but simply making it easier to access and use the feature. I have also made it possible to use auto answer with or without a headset.
The application is not code signed therefore you have to grant access if your device is appication locked.
Tips
1) The application should be running to enable the features to work.
2) The talk after (0-30) seconds should the less than the value set for call forwading otherwise your incoming calls will go to voicemail.
3) Assign a hardware button to the application to allow easy access. (Personally I use AE Button Plus to get more button options, I dont know if there are free alternatives)
4) Finally, when you exit the program your phone settings will be retained.
MyCar Profile Version 0.1
Click to expand...
Click to collapse
cool app something like what i am looking for but i am seeking a app that will allow for when phone is connected via bluetooth to car which is concered "handsfree mode" making a app that would allow to select to answer call via car or phone or speaker phone of phone when phone is connected to car via bluetooth there is a switch in call menu which says turn off handsfree if some one could create a app to if user selects answer via phone or speaker phone simply turn off the switch and optionaly turning on the speaker phone (if speaker phone option is selected). is this something u could make? i have seen many post asking but no one has made it as of now
thanks for this kuda!
this is also usable while taking a shower.
Wonderfull app, I was always looking for something like this! When I'm driving the car and my girlfriend calls me.. I can pick it up but can not hear her Now i can with this usefull app!
The best feature: "This application allows auto answer for incoming calls and automatically turns speakerphone on without pressing any buttons on windows mobile professional devices"
Speakerphone bluetooth
rruffman said:
cool app something like what i am looking for but i am seeking a app that will allow for when phone is connected via bluetooth to car which is concered "handsfree mode" making a app that would allow to select to answer call via car or phone or speaker phone of phone when phone is connected to car via bluetooth there is a switch in call menu which says turn off handsfree if some one could create a app to if user selects answer via phone or speaker phone simply turn off the switch and optionaly turning on the speaker phone (if speaker phone option is selected). is this something u could make? i have seen many post asking but no one has made it as of now
Click to expand...
Click to collapse
Thank you for trying the app. At the moment I haven't found a way to detect bluetooth headset state.
Hi Kuda
Great idea, thanks for sharing but on my device works 50%: autoanswer yes, speakerphone no... Can you do something please ?
same with tito12... autoanswer: YES, speakerphone: NO.
I will run soms tests on my Touch HD to see if the speaker is working properly!
tito12 said:
Hi Kuda
Great idea, thanks for sharing but on my device works 50%: autoanswer yes, speakerphone no... Can you do something please ?
Click to expand...
Click to collapse
TheRem said:
same with tito12... autoanswer: YES, speakerphone: NO.
Click to expand...
Click to collapse
Hi All,
I will look into the bugs later today. At first thought it might something to do with bluetooth audio routing which i have a solution. Expect a new version soon
Works as described on my Fuze w/updated stock ROM. Tried;
- auto-answer on/speakerphone on
- auto-answer on/speakerphone off
- auto-answer off/speakerphone on
- auto-answer on/speakerphone off/BT headset active
and every scenario worked as expected. Also released the process and RAM after closing .
Thanks,
JIM
Update: myCar Profile Version 0.3
Hi All,
As promised I have updated the app again to allow for automatic detection of bluetooth headsets. First post has been updated with new screenshots explaining how the app is intended to work or be used. For those having problems try latest version and report back on this thread. It would be nice if you also report which devices you are having problems or which devices the app is working perfect.
Enjoy
problem with iGO8 on
the new version works great in my polaris, wm 6.1 official rom! it's compatible with s2u2 which i'm happy about and works even if the phone is at a sleep mode. however, when my iGO8 is on, the speaker on does not work (the auto answer works though). i hope you can find a fix for this. most of the time, i use my gps while driving and i get calls quite often. it would be perfect if the speaker on works too.
thanks a lot for this great app!
one suggestion too. if you can make an icon for your app and place it on the taskbar at the top (together with the battery, signal strength, etc.) so that it tells us that it is on and running. perhaps clicking on that icon can also open it to change the setting, or quit the app.
V0.3: speakerphone still doesn't work.
TheRem said:
V0.3: speakerphone still doesn't work.
Click to expand...
Click to collapse
Its working on my device and other people's devices. I am supprised that it doesn't work for you. Anyway, try the following:
1) Exit the app if its running.
2) Launch the app - don't press any buttons after after app started.
3) make a call to your phone and see if speakerphone works.
Which device is is the speakerphone failing and under what settings.
Hope this helps
Kuda
i did steps 1-3 but the speakerphone still doesn't work.
i'm using HTC Touch Viva (Opal) with WM6.5 Build 23506 (COM5).
Does not work (either Spearkerphone or AutoAnswer) on HTC Cruise with custom 6.1 ROM.
It does not autoanswer: S2U2 simply ignores MyCarProfile settings and keeps ringing until I press answer key.
Speakerphone doesn't work regardless autoanswer setting.
TheRem said:
i did steps 1-3 but the speakerphone still doesn't work.
i'm using HTC Touch Viva (Opal) with WM6.5 Build 23506 (COM5).
Click to expand...
Click to collapse
Do you have any other software using the speakerphone when you run run the app? I wish I could simulate the problem then I would be able to help.
Hi All,
If anyone has the same device(s) as our colleagues who are having problems can you be of assistance or can you let us know your experience with the app so that we may be able to help others or revisit the code.
Thanks,
Kuda
trepamuros said:
Does not work (either Spearkerphone or AutoAnswer) on HTC Cruise with custom 6.1 ROM.
It does not autoanswer: S2U2 simply ignores MyCarProfile settings and keeps ringing until I press answer key.
Speakerphone doesn't work regardless autoanswer setting.
Click to expand...
Click to collapse
I have just installed S2U2 on my Touch HD to test. At first it did not work as you have reported. In order for it to work I set the following setting in S2U2 Settings:
Don't use KeyBoard Hook = OFF
This is because myCar Profile uses keyboard hook.
Regards,
Kuda
First of all, thank you for your interest and feedback! Mostly due to your request I want to present you a new version.
Version 1.25 changelog:
1. Added Connections on/off
2. Added alarm - poor one
Version 1.20 changelog:
1. Added new profiles: WiFi on/off, Bluetooth (BT) on/off, Phone on/off. Added also Soft Reset.
2. Some minor changes.
Version 1.10 changelog:
1. Added half-hours (I think quarters are too much).
2. Hour format (24 or 12) is automatically changed depending on your regional settings.
3. I don't have VGA device, but I think now the screen is squeezed a bit so it can fit to VGA square screen. Please, try and tell me what happens.
4. Added sound profiles - low, medium, high and very high.
5. Number of settings increased from 4 to 15.
Please, download TProfiler120.CAB for latest version.
Automatically switches device sound mode(available profiles - sounds on, sounds off, vibrate, volume low, medium, high, too high), turns on/off wifi, bluetooth, phone mode and soft resets at selected hour and weekday and thus saves your battery power. Simple application, doesn't occupy memory. Tested only on HTC HD2 but should work on other devices too (TP2, Touch HD/Blackstone - tested thanks to replies to this thread).
It works fine on TP2
Great application.
It would be great if it had also a 24-hour mode .
It would also be great if we could set the device to change to a certain volume on the Ring and System. I like to turn my phone down to 2 notches on both of those and crank it back after 5pm.
digiblur said:
It would also be great if we could set the device to change to a certain volume on the Ring and System. I like to turn my phone down to 2 notches on both of those and crank it back after 5pm.
Click to expand...
Click to collapse
+1 on this request.
Would be also great if one could change profile on headset plug-in/plug-out.
When I softreset the phone it gives me a non signed error.
VGA please
scabbard1 said:
VGA please
Click to expand...
Click to collapse
+1
looks very promising as of this is really important to have because i tend to forget to switch my phone to silent when im at school
ill be watching this thread
Great application !
Feature request: time in quarter/half hours too.
You might want to add some additional 'rules'. If you have a different time schedule for every day in the week, 4 just aren't enough...
Awesome
Been waiting for a free app like this. The Connective Tools one is nice, but I love the continuing user driven development of XDA. The suggestions on here are great and I echo the setting the volume to a custom level and the quarter/half hours things.
zharptitza said:
Been waiting for a free app like this. The Connective Tools one is nice, but I love the continuing user driven development of XDA. The suggestions on here are great and I echo the setting the volume to a custom level and the quarter/half hours things.
Click to expand...
Click to collapse
+1 though 5 min time slots would be better. Are going to try and integrate the App so it will switch on calendar appointments?
just installed 1.10 on my HD, but when I start the app it alerts "Doesn't exist", and after tapping 'ok' the app doesn't respond anymore, actually the complete screen doesn't respond. Using the hardwarebuttons I can go back to my homescreen and then using the system taskmanager I can shut the app down after that everythings fine..
anybody got an idea? because it looks like a useful app to me
Dear Xsite3,
I think you had to wait for a while - when started first time the application takes more time (1-2 minutes).
Just installed v1.1 on my HD2 and i get the message attached. Any ideas?
When I try to start up TProfiler I get a message box that simply says "Doesn't Exist". After that I can click on the TProfiler icon all day long but nothing happens. Wonder what doesn't exist?
V 1.10 crashes for me
I was using version 1.00 with no problems on my HTC Fuze running WM 6.5. But version 1.10 crashes on startup with this error:
TProfiler.exe
InvalidCastException
at
Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger()
at
DeviceApplication1.Form1.Form1_Load()
at
System.Windows.Forms.Form.OnLoad()
at
System.Windows.Forms.Form._SetVisibleNotify()
at
System.Windows.Forms.Control.set_Visible()
at
System.Windows.Forms.Application.Run()
at DeviceApplication1.Module1.Main()
The app appears to draw at least a portion of it's window, and then crashes, though it goes by too quickly to see just how much of it is drawn
I really like the app. I especially like the addition of half hours in this version, if I can get it to work.
Hypermommy said:
When I try to start up TProfiler I get a message box that simply says "Doesn't Exist". After that I can click on the TProfiler icon all day long but nothing happens. Wonder what doesn't exist?
Click to expand...
Click to collapse
Hmm same here
Phone: TOuch HD
Rom: Xannytech 1.9B (+maxManila)
Cheers
Problems
Fellows, sorry for keeping you waiting - Please, try now - it should work.
So I got tasker up and running and have set up a small scene for when I plug my headphones in. It pops up a small screen asking what I'm doing, and I can either click do nothing (does just that), play music (sets volume levels and starts music), or car mode, which sets volume levels/wifi/blutooth/gps sensors and starts my ecu communication app (torque).
The only problem is, like any good computer science student, I know to unload something when done with it, and I unload the scene. This has the wonderfull effect reverting everything that little menu did back to it's previous state. I've come up with a few possible solutions, but have some gripes with each of them (see below). My question is though, is there any way to make those system changes static, so that when I unload the menu, it doesn't revert it's changes?
Solution 1 - Do not unload the menu, just hide it and have the profile that activates when I unplug my headphones unload it.
Problem - This leaves it in memory. Not the largest chunk of wasted space ever, but still less than desirable. Looks better to me than solution 2 though.
-------------------------------------------------------------------------
Solution 2 - Have the button set a variable which when active starts another profile to do all those things
Problem - That just creates 1 (or more) extra profiles that I assume tasker is constantly monitoring the status of. That's wasted cpu cycles right there.
-----------------------------------------------------------------------
Solution 3 - Somehow make the changes persistent, so that they do not revert when the scene is unloaded.
Problem - I'm not sure if it's possible to do this. Help would be appreciated, thank you!