hi,
just recenty got a t mobile.
apparently it is SID lock. tried all the utilities (Xda developer, showpin, xdaunlock, xdamsetup)
while running the nbf file the process got stuck and I'm getting " upgradind,,,,, it will take 5 minutes...
I don't mind reseting because there is no info on it but it is stuck.
how do I get out of it?
What upgrade method are you using SD or PC install?
If its the PC try using the SD method also if your device is SID locked
try upgrading to XDA SP ROM 1.2 it has a built-in unlocking program.
Good Luck!
right now I am trying pc install.
at the moment my pc won't recognize the device throu the USB, so I cant sync.
the PDA is stuck on flash tools or when I tried to reset it returned to " upgrading... 5 minutes"
is there is a way to get out of it?
Yea use the SD card method!
HTH
could you be more specific ( I am new in this stuff)
1. how do I get out ?
2. how do I get my pc to recognize the device again?
Related
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
p.s srry for my bad english
Did you rename it to eboot.nbo ? Have any files in root folder of your miniSD ?
Who make you try this way ???
i rename as i mentioned above with the long name only change the .nbf to .nb0
i also regret now coz cant even see anything from the screen >> althought tried reset eith all the mothod..
izzit my 6828 dead ad?
cant even repair by myself and have to send it back to hp for repair?
williamSun said:
i rename as i mentioned above with the long name only change the .nbf to .nb0
i also regret now coz cant even see anything from the screen >> althought tried reset eith all the mothod..
izzit my 6828 dead ad?
cant even repair by myself and have to send it back to hp for repair?
Click to expand...
Click to collapse
If you don't rename to eboot.nb0 => Your device didn't flash it => Your device not dead. Have another files in the root folder of miniSD card ? List for me!!!
--Try this way :
Press both softkeys (two "-" keys) and remove battery then insert battery again (don't unpress two softkeys) and softreset, wait 2-3 seconds. It'll go bootloader mode. You can flash your device again.
hmm, tried u way ad didt make it to boot screen..>.<
in case i rename to eboot.nb0 >>i not really sure<<
>>izzit case sencetive?
>>izzit 6828 dead??
williamSun said:
hmm, tried u way ad didt make it to boot screen..>.<
in case i rename to eboot.nb0 >>i not really sure<<
>>izzit case sencetive?
>>izzit 6828 dead??
Click to expand...
Click to collapse
What is your current bootloader, 1.01 or 1.05 ?
If you follow that menthod but it didn't go to bootloader, your bootloader was dead.
You can send it to HP to repair, or try this way : http://wiki.xda-developers.com/index.php?pagename=DeadBoot
I recommend to sent it to HP.
while the PDA is still can open and bootloader screen
is 1.01
and im trying to use the EBOOT0502_MNT_01.01.03.nbf which found in the
HP official RUU PC flash ROM
and rename to EBOOT0502_MNT_01.01.03.nb0
then put in the root of memory card
then start to flash ..
now the PDA wouldn't reapond to any button HR, SR, soft-key + reset ...etc
only can charge and orange LED indicated
williamSun said:
while the PDA is still can open and bootloader screen
is 1.01
and im trying to use the EBOOT0502_MNT_01.01.03.nbf which found in the
HP official RUU PC flash ROM
and rename to EBOOT0502_MNT_01.01.03.nb0
then put in the root of memory card
then start to flash ..
now the PDA wouldn't reapond to any button HR, SR, soft-key + reset ...etc
only can charge and orange LED indicated
Click to expand...
Click to collapse
You was flash wrong bootloader due to make your device dead.
Now you need restore bootloader.
If you send to HP, they will replace board you must pay for it.
But you try the JTAG menthod to restore bootloader it'll make your warranty expired.
thx for all ur answer, i really appreeciated.
btw, for sure hp center will replace a board in it and that will be expensive rite?
if i sent to other shop which is not HP official service, will they do the same?
izzit juz flash using tools they hv>?
and expensive?
Here is what I did ... might help you
Hi
Make sure your phone is powered, it would be wise to charge the phone via AC power at least for 1-2 hours before you try to install anything.
I finally managed to install WM6 on my HP ipaq rw6828. But it wasnt easy, it took me 1 full day to get it installed. Just to help other people who are installing this, here is my experience -
What all I did and how I finally got there -
1.
Tried to install it via PC. When I already had a higher version of the Bootloader installed. Best way is to install it via 1GB mini SD card.
2.
After reading other posts I managed to downgrade the bootloader to version 1.0.1 (not sure of the version number...but its the version you get after installing the HP SP34074).
3.
Once I managed to downgrade. I got into the Bootloader mode on my device( its pretty simple to get into BL mode, make sure you ask someone to help you with it, its easier with two people, to get into Bootloader mode - a)press the two "-" buttons on the phone together. b)While the two "-" are pressed have a second person remove the battery. c) Wait for a few seconds and ask the person to insert the battery back. d)Once the battery is in place ask the second person to use the stylus and push into the soft reset hole (its hole on the left of the USB connecter on the phone). e) Wait for a few seconds and then phone should go into the BL mode. f) release the two "-" buttons after it enters the BL mode. Sometimes for me it entered the BL mode after I released the "-" buttons also. But dont release the "-" buttons till you have pressed into the hole with the stylus.
4.
With my phone now in the BL mode and showing the older version 1.0.1 (not sure but it should not be 1.0.5) I clicked the Device Software Update Utility.exe. I got the screen where you get a combo/dropdown with "ALL" pre-selected. The install step clearly says choose "OS" only and not "ALL". But I made a mistake here, for some reason using the mouse I didnt see any other option in the dropdown accept for "ALL". so I selected ALL and did a next. The setup kicked in and I got different screens showing status of install. But on the final screen it got stuck at 6% and stayed like that for well over 6 hours...I didnt touch the install as the instruction clearly say not to disconnect or stop the exe. But after 6 hours I realized that something is wrong and i killed the Device Software Update Utility.exe file.
5.
I did a soft reset on the phone and to my surprise after a while it loaded WM6....but that was it. Has the install failed in between the WM6 on the phone was totally screwed up...nothing worked properly. I coudnt even get ActiveSync to recogonise my device or connect to it.
6.
I tried the whole sequence mentioned in step 4 again but no luck now Device Software Update Utility.exe would error out I assume it could be because of the BL version 1.0.5. So I thought let downgrade and install the older BL version....but with no active sync i coudnt downgrade the device.
7.
Then i read somewhere SD card boot method to copy the EBOOT0908_MNT_1.00.05.nbf from the SP34074 and rename to eboot.nbo. This didnt work either, am not sure if I renamed the file correctly to .nbo(Orange) or .nb0(zero). Well I dont know whats correct eboot.nbo or eboot.nb0. But since this step didnt work. I was really upset as I felt I was stuck...then GOD had mercy on me and I did something which simply worked ...
8.
I took my mini SD card out connected to my Laptop in the SD card slot with the SD adapter. Did a quickformat to clean it up...if you have data its a good idea to back up the SD card in a seperate folder.
9.
Now I had a clean SD card with no files I downloaded the 1.0.5a (for 68x8) for miniSD. I copied the diskimg.nb0, size : 64,000 KB to the SD card root folder.
10.
Since I was trying the SD card method, I connected the mobile to AC power instead of the PC just to make sure I had enough power for install.
11.
I popped the SD card back into the phone. Removed the phone battery. Then entered into the Bootloader mode (refer to step 3 for getting into BL mode). Well nothing seemed to be happening...but I decided to stay on the BL mode .... to my surprise after 10-15 min i got a message asking my reset and goto factory mode. I wasnt sure if it was asking me to do something or was just a message. While I was wondering...the phone restarted automatically and it loaded WM6 ..asked me to do the tap thing to configure like the initial factory setup .. after all this I poped my SIM inside. Connected the phone to my PC. Active Sync finally recognized my device and synched everthing. Now everything WORKS!!! Though there are some issues like the camera flash doesnt come on.. etc but more or less everything seems to work. I havent tried other applications like email SMS wifi bluetooth etc.. I will post soon my experience weather all main applications work without a glitch...but am so happy my patience paid off..
Thanks to nhocbanme for WM6 version for HP ipqa rw6828, my biggest mistake was not to properly follow steps listed by nhocbanme. For people trying to install WM6 on HP ipaq rw6828....please please use the SD card method...it works and takes less then 30 minutes...you can follow my steps 8,9,10,11 to have a trouble free setup.
Good luck
Amit Reddy
Hi... my bootloader is dead any I cannot locate the fin out to flash my ipaq rw6828... please tell me where exactly are the pin out for rw6828
Thanks you.
Hi WilliamSun,
if you can go to boot loader it mean you can repair your device. You should download WM5/WM6/WM6.1 ROM that design to flash via mini SD. you can download it from nhocbanme's or hellowordl1's thread, and flash your device again.
Good Luck.
HELP
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
in this case i cant solve my problem
downgrade with SP34074 from PC (like intruction on screen PC)
1. run SP34074 from PC
2. remove battrey from device for sec, and put back to device
3. connect the device via USB, n make sure the PC is respon that
4. follow the instruction in screen
its work for me
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
Hi all,
I have a Lumia 710, with an unlocked Qualcomm bootloader. Yesterday accidently while flashing a rom as the NAND Disk Drive, whilst doing that i 'didn't' select the OSBL mode & the one beneath it which says W7 Qualcomm, before flashing it. Now it got flashed but the problem is its stuck to one rom. The App deployement tools gives errors such as 'make sure the phone is booted' even though its booted & fine. Or the other error it gives is 'request rejected by host machine'. When connected to Zune i now get pop up from Zune stating 'we can't create a connection from your phone to the internet' now this comes up all the time. I can sync stuff but can't deploy stuff or flash stuff
When i did try flashing the same rom again. After flashing it started directly at the livetiles screen as if nothing happened. I was expecting the 'Welcome to Lumia' screen. Please tell me whats happening. Also i was able to flash another rom on it. However still Zune gives the same error when connected so does the Deployment Tool. I can't figure out what can be done to solve this. I suppose the bootloader might be affected. How do i refresh it? I thought about going to Dload & then Back to Qualcomm. But it seems that many people have bricked phones trying to goto Dload from Qualcomm.
I want my Lumia to be unlocked, but more over, i want it working fine...
Any help & info is appreciated, Thanks
try going back to DLOAD..or do a hard reset to your phone and flash another Custom ROM again.
wen u connect the phone..open device manager and uninstall the drivers..reconnect in same mode..let the drivers reinstall.
surya467 said:
try going back to DLOAD..or do a hard reset to your phone and flash another Custom ROM again.
wen u connect the phone..open device manager and uninstall the drivers..reconnect in same mode..let the drivers reinstall.
Click to expand...
Click to collapse
I followed your instructions... Heres what i did...
Step I: Performed a Hard Reset using the Vol Dwn + Camera + Power Up keys.
Step II: Turned the Phone off & connected the phone with Vol Up + Usb connect. Theres an asterisk sign on Qualcomm CDMA Technologies MSM (I had it uninstalled prior to the reset using the Device Manager, It was detected whilst i connected it in Nand mode again)
Step III: Flashed a new rom on it. Lumiatrix v4.3. Still Zune is giving the same error & Application Deployment is not yet possible.
Surya there are three things i need to ask you.
1. In your Noob Guide the rom flash part you are asking people to turn On their phone, select Nokia Connectivity Mode & then select the .nb file & click Write Os. When i try that it asks me for a Nand Drive.
2. If i should try going back to Dload (can i switch to Qualcomm whenever i feel like?), can you please suggest me a clear & concise method, as to how to do it. I wanted to try this (http://forum.xda-developers.com/showthread.php?t=1702815) but its too confusing.
3. Is a bootloader refresh possible? I connected my phone when it was On. I got the Nokia Connectivity Mode. I tried installing the bootloader it found the phone but wanted me to be in the flash mode. However, when i enter the Nand mode it never finds my phone except when i Write Os on it.
I know i have a long list of questions. Its only because of the fact that i want to understand this better. I dun wanna end up bricking my phone. Thanks in Advance. Tc & Godbless!
Ok..wen u connect your phone to the PC while its ON, its in normal mode...the moment u turn on NSS, it will change modes, so it doesnt matter unless u click WRITE OS, which switches the phone OFF and puts it in the NAND dDrive.
as you have a 710, you can try going back to DLOAD and flash a Stock rom and see if that works, and then you can always go back to a qualcomm by my guide.
your at no loss , unless the problem you have a more complicated than we think it is.
surya467 said:
Ok..wen u connect your phone to the PC while its ON, its in normal mode...the moment u turn on NSS, it will change modes, so it doesnt matter unless u click WRITE OS, which switches the phone OFF and puts it in the NAND dDrive.
as you have a 710, you can try going back to DLOAD and flash a Stock rom and see if that works, and then you can always go back to a qualcomm by my guide.
your at no loss , unless the problem you have a more complicated than we think it is.
Click to expand...
Click to collapse
i would try going back to Dload. However, can you please suggest me a clear & concise method, as to how to do it. I wanted to try this (http://forum.xda-developers.com/show....php?t=1702815) but its too confusing.
Are you suggesting using NSS Bootloader Restore? If so, is there a mode that i need to be in? I'm using NSS 0.51b & when I click on restore it brings up a very scary warning message. As I don't want to brick it, i haven't used it yet.
Please suggest me a method... to return to Dload
SO dont know why but i have the security error under logo. NOTHING WORKS.. tried to use lelus to go back to ics but i cant get into the Lg Software mode or whatever to even do adb or abd (spelling)... Even going into S/W Upgrade mode my comp says its not plugged into the phone.. I.. AM... OFFICIALLY STUCK.. i've tried everything and all methods... I cant get into cwm to run a nandroid or nothing... If I get to Mobile Support it just keeps repeating "Connecting to device" over and over again
I have all the necessary drivers installed.... this is getting tough
this is still a problem.. really need help here.... its as if the s/w update or usb drivers arent installed but they are sooooo idk... im stuckk
Hi aarongotgame, did you try with a back USB 2 port (no USB 3), or with another OS (http://revryl.com/2013/08/06/install-unsigned-drivers/) , or another USB cable?
or perhaps with sammyz's LGFlashTool method? http://forum.xda-developers.com/showthread.php?p=52582562
Cheers. Good luck.
Edit: Or this way http://forum.xda-developers.com/showthread.php?p=50729855
** In LG Mobile Support Tool Navigate to Update/Tools and there select upgrade recovery.
Cheers . Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
UPDATE: I USED THIS METHOD.. CREDIT TO http://androidforums.com/optimus-l9-all-things-root/807569-guide-security-error-fix.html
So you've eventually solved your issue! Congratulations!
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
:highfive: Hi !
I run Windows 7, Samsung Galaxy S7390G (rooted) originally under stock rom (because there's no custom rom for my phone :crying:,) and without any custom recovery (because there's no custom recovery for my phone)
I had problem with my internal SD card, I posted on forums, but not this one, and had no help, so I decided to restock my phone.
I used Odin, because I failed with Heimdall, and Odin began flashing my Rom, but gave me a red "fail" message error.
I tried the SamMobile's stock rom for my device, S7390. I tried several ones, always S7390, and Odin failed each time, and stuck me in half-bricked state.
Note: My old computer is with Linux Mint, but I can't use it for now, but I can make a live USB with a Linux distro under the Window computer that I use now if it helps.
I have sometimes some trouble with the USB drivers, and I have been forced to reinstall them many times, trying different packages. For now, but I don't know if it will last, Odin is able to recognize my phone, but each time I try to flash a Rom, it fails. I tried another USB cable, and other USB ports, same thing...
I don't know what to do? I read that there was solution with the adb command, I'll read about it, because I have poor knowledge, but I despair
Even if I know it can be repair, but I can't do it! :crying:
I can only access to download mode.
Please, help a poor despaired French girl. Thank you very much.
Nobody?
None to help? :crying:
Same Problem
No worrys darling you can just go to recovery mode of your phone and select wipe factory data reset and then your phone will reboot and it will be as new as you bought it that time only.
Hope it helps
Sent from my GT-I9300 using XDA Free mobile app