Related
Help!! My SGS2 is stuck on a screen with an orange triangle and excmamation mark between a cellphone and computer after a ROM flash attempt!
I can go to Downloading mode and Odin can detect my smartphone but i don't know what else to do...
Flash a full (different to whatever you were trying) ROM, problem solved.
Sent from my GT-I9100 using XDA App
yep, that's just a soft brick.
since you can access DL mode, just reflash with odin and normally problem solved
Haaa, thx all i fixed it! ^^
It took me 5 hours to find out what i had to do and find the stock Firmware tho...
But all fine now
Hello,
I've got the same problem but it seems I can't go into download mode. What am I doing wrong? What else can I try?
My SGS2 is not rooted and was on Android 2.3.3. Kies told me there was an update available to android 2.3.4 so I went for it.
But I'm really disappointed, now my phone is completety stuck on this screen with the phone...orange triangle with exclamation mark (warning)...PC.
EDIT : Samsung Kies proposes to do an emergency recovery, but in the end it also fails.
Fortunately, I took a screenshot before upgrading. See attachment.
Please help me.
kind regards,
Andrew
andrewvbv said:
Hello,
I've got the same problem but it seems I can't go into download mode. What am I doing wrong? What else can I try?
My SGS2 is not rooted and was on Android 2.3.3. Kies told me there was an update available to android 2.3.4 so I went for it.
But I'm really disappointed, now my phone is completety stuck on this screen with the phone...orange triangle with exclamation mark (warning)...PC.
EDIT : Samsung Kies proposes to do an emergency recovery, but in the end it also fails.
Fortunately, I took a screenshot before upgrading. See attachment.
Please help me.
kind regards,
Andrew
Click to expand...
Click to collapse
If your phone is not rooted, you still have your warranty, bring it back to the shop and ask for a new one
I bought it an amazon. But I'd prefer to have a solution right now instead of having to complain.
I continued my quest on the net... Apparently, a usb jig might take me out of this screen and back to the download mode. Can somebody confirm this?
andrewvbv said:
I bought it an amazon. But I'd prefer to have a solution right now instead of having to complain.
I continued my quest on the net... Apparently, a usb jig might take me out of this screen and back to the download mode. Can somebody confirm this?
Click to expand...
Click to collapse
One minus Did you follow the Kies recovery instructions .
One turn off and remove battery for a short period .
Two turn on
Three try recovery mode
Four try download mode ..
Five yes USB jig may enable you to get to download mode and from that you can flash a stock Samsung rom .
Six service centre
jje
Thanks JJEgan. I'll try once more and let you know. Assuming that I am able to get in download mode, why should I use a stock kernel and not the normal firmware I had before? Sorry about my question, but this is all new for me.
A USB Jig should be standard equipment for anybody who flashes their Galaxy phone, IMO.
andrewvbv said:
Thanks JJEgan. I'll try once more and let you know. Assuming that I am able to get in download mode, why should I use a stock kernel and not the normal firmware I had before? Sorry about my question, but this is all new for me.
Click to expand...
Click to collapse
Download Odin, download stock ROM, use Windows Task Manager to kill any Kies-related processes. Then turn off the phone, turn it back on in download mode and flash using Odin. Do not tick repartition and do not use the PIT file if the stock ROM comes with one.
Hi,
Thanks to this forum I managed to bring my SGS2 alive again step by step after that Kies broke it during the android upgrade from 2.3.3 to 2.3.4... Moreover, I am in the official 2.3.4 version now without using Kies!! ;-) Here's my story:
In the end, I was able leave the screen with the "phone..orange warning triangle..computer". and I was able to go in download mode without a usb jig. You have to press the 3 keys (volume down, home, and power on) quite a few seconds without releasing them. And then the download warning menu appears, press volume up to confirm that you want go go in download mode. And I was in "download mode'. Anyway, I will buy a jig ;-)
I tried once more the emergency recovery with samsung Kies without success. Failed.
Then with Odin I had problem. It was stuck at step "setup connection". Kies was not running and was not visible in the system tray. Though in the task manager, I still had 2 Kies* processes. Kiestrayagent.exe and another one starting with Kies and 4 letters (sorry I didn't write it down). I killed both processes. One step further... Then Odin was stuck on step complete(write) operation failed. Never found why. I tried several times, battery in and out again, without success. This was on a Win7 32bit. Latest Kies version.
In the end I installed Odin on another PC Win7 64bits. I had to install Kies also on it otherwise Win7 says "no driver found" when you plug in the usb cable of the SGS2. And on this computer, flashing with Odin worked perfectly.
Thanks again to all people who helped me + also thanks to this super forum where I could find the official firmware I needed after that Kies broke down my phone.
Andrew
hi
Spl1tz said:
Haaa, thx all i fixed it! ^^
It took me 5 hours to find out what i had to do and find the stock Firmware tho...
But all fine now
Click to expand...
Click to collapse
but tell me how you got it fixed
help i have the same problem
Spl1tz said:
Help!! My SGS2 is stuck on a screen with an orange triangle and excmamation mark between a cellphone and computer after a ROM flash attempt!
I can go to Downloading mode and Odin can detect my smartphone but i don't know what else to do...
Click to expand...
Click to collapse
i have the same problem how can i silve it
skhoudary said:
i have the same problem how can i silve it
Click to expand...
Click to collapse
Simple solution:
Read the posts above!
"To err is human, to forgive is divine"
Sent from my SGS II
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
I am using the UCKH7 one click w/root tool.
I start download mode by holding volume up and down while plugging in USB. I click the start button but the program hangs at 'factoryfs.img'
Please help. Thanks.
AT&T galaxy s2
Deenybird said:
I am using the UCKH7 one click w/root tool.
I start download mode by holding volume up and down while plugging in USB. I click the start button but the program hangs at 'factoryfs.img'
Please help. Thanks.
AT&T galaxy s2
Click to expand...
Click to collapse
I use heimdall personally. Never had any problems with it. Do you have all the sgs2 drivers installed?
Also check md5 sums to make sure your download is ok.
Sent from my SGH-I777
I'll try heimdall. Drivers should be fine as kies is installed. Rom should be good as I've tried 2 different download sources
Make sure you install the libusb drivers for heimdall before flashing. The instructions are in the heimdall readme. Good luck
Sent from my SGH-I777
Just wanted to post that my problem is solved.
Summary: My AT&T Galaxy SII showed an error on boot (software upgrade failed. connect to kies...). Kies wouldn't even recognize the device so that route was a no go. So as everyone's recommended method of last resort, I decided to flash the device back to stock via odin. I entered download mode (volume up + volume down and plug in usb) and Odin would recognize the device, I would load the stock rom in the PDA slot and hit start and it would begin normally, but it would always fail after a few seconds on 'NAND write start', or 'factoryfs.img'. So I got a 1 click download solution using odin for reverting my phone back to stock. Same thing, it would recognize the phone, but stall out and fail. I also tried flashing clockworkmod via odin but and same problem. People recommended I try heimdall. It would recognize my device, and then fail after 'kernel 100%'.
I tried both programs on 3 different computers, and must have tried 12 different USB slots amongst all of them. I'm fairly handy with this stuff and I worked for hours on it.
xtra info: I had successfully used odin on my computer to flash a kernel just a week ago so I know my stock usb cable was working etc...
Resolution: So I hung my head and drove to the ATT store. After pressing a few buttons on the device and not getting anywhere they sent me to a nearby Device Support Center. I told the girl at the counter that my phone booted to this error screen and that connecting it to Kies did nothing. She asked if it was ok that in the case that she couldn't fix it she would offer me a replacement. I said that was fine and after 10 minutes in the back room she came out with a replacement (free of charge).
Well that was the good news. For the bad news, unfortunately I still don't know how to fix the problem I had, and don't really know how to avoid it in the future. I thought phone's could only get truly bricked if you messed with PIT files and such. There didn't seem to be anything more I could do than flash with odin or heimdall as those were already last resorts. I know I had the right files, the right drivers, and working usb. No matter how crazy I got with my iphone, a full restore was only a click away by plugging in to iTunes. Somehow I messed up my phone so bad that even the device support center couldn't fix it....? Shouldn't have had to be like that.
Thank yous: Thanks to ATT for having a walk-in store and for so easily offering up a replacement. Thanks to the many people on the web who offered remedies.
tl;dr - phone broke, att replaced, still a mystery
Hi guys.
Tonight I did a data reset via the system settings menu within the OS so that all personal data can be wiped from the phone.
Shortly after I did this, the phone reset, then just started randomly flashing and not booting, occasionally pausing on a totally white screen.
I tried to enter into recovery mode with no luck, and had no luck with download mode either.
My USB jig worked and got me into download mode, and it now also lets me enter download mode via the 3 button method.
I figured I would just use odin to flash a new kernel/ROM, however the phone refuses to come up in odin and is no longer even recognised on my PC (unknown usb device).
I've tried installing and reinstalling drivers, different usb ports, different cable etc and nothing makes any difference.
Anyone have any clue what I can do about this?
PS. The phone was on rootbox rom (unsure of version) and I'm fairly certain it had siyah kernel.
sorry, posted in the wrong section.
please switch it over, mods
No recovery?
Sent from the little guy
What version were you running? GB, ICS or JB? Which kernel? Did you try to flash tar file? Repartition through Odin?
Sent from my digital submersible hovercraft.
It was running ICS, unsure of exact version.
And I did not try to do anything with odin as the phone is not recognised at all any more, doesn't come up in odin..
and yes, I cannot access recovery mode at all via the 3 button method
Didn't it work with the jig?
Tell us what you can do with your device right now.
Sent from the little guy
as above, I can enter download mode, but absolutely nothing else.
no boot, no recovery, phone is not recognised in odin, phone is not recognised by windows.
Can you find the device in windows device manager as unknown device?
Sent from my GT-I9305 using xda app-developers app
Wuxar said:
Can you find the device in windows device manager as unknown device?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
yep, that's exactly what it comes up as.
Have you tried with another computer?
Sent from my GT-I9305 using xda app-developers app
Hold on, i'm going PC Mode.
In the meantime flash siyah v6
Sent from the little guy
---------------------------------
Try these and report back.
gastonw said:
Hold on, i'm going PC Mode.
In the meantime flash siyah v6
Sent from the little guy
---------------------------------
Try these and report back.
Click to expand...
Click to collapse
mate, I really appreciate you trying to help me but I'm not entirely sure that you are even reading my posts.
I'm not sure how I am supposed to flash a kernel when my device is not even seen (besides "unknown device") on my PC, and does not display at all in Odin.
ps: i've already tried all of those steps in that link, nothing has helped
lolthrash said:
mate, I really appreciate you trying to help me but I'm not entirely sure that you are even reading my posts.
I'm not sure how I am supposed to flash a kernel when my device is not even seen (besides "unknown device") on my PC, and does not display at all in Odin.
Click to expand...
Click to collapse
I've read your post?
Have you read mine?
What are we trying to do here?
To make your PC see your device.....am I right?
yes, the objective is to make my PC see the device.
and seeing as the PC needs to see the device for me to flash anything to it, I'm unsure as to how flashing siyah will help me when I cannot in fact flash anything at all
lolthrash said:
yes, the objective is to make my PC see the device.
and seeing as the PC needs to see the device for me to flash anything to it, I'm unsure as to how flashing siyah will help me when I cannot in fact flash anything at all
Click to expand...
Click to collapse
yeah yeah
You get unkown device when plugged in? delete that.
Install kies.
Already installed? uninstall it.
Re install.
just figured out the problem with it not recognising it via usb, it was a dodgy USB flex that I'd installed to fix a microphone problem (which eventually turned out to not be hardware related).
just swapped back the original board and hey presto, the damn thing is recognised in windows and in odin.
thanks for the help guys
Be carefull now.
Sent from the little guy
wrong post, didnt read your post properly