Related
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
paperuccio said:
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
Click to expand...
Click to collapse
Why not email the author, he is most helpful.
Had the same issue with the Parrot. My Plantronics headset works a treat, but not the Parrot.
I mailed the author who confirmed there are some problems and a new release will be needed.
As the author is doing this work unpaid and the functionality is so good, I can wait.
@ mrg2003
I send an e-mail some days ago but still had no response.
Anyway, I agree with IanF and I'll wait for the new release.
I wish I read this bulletin board more often.
Yes, I have exactly the same problem with the CK3000 (v3.13) and PBT. HBH-35 works a treat but CK3000 does not bond (XDA thinks it does but there is no handshaking and CK3000 repeats request to bond).
Back to basics again ...
Incidentally, does anyone know if Tobias plans to engineer a way to trigger Voice Command and take input from the car microphone for voice recognition? Would be the dogs and well worth a major donation ....
Cheers
I've had some problems with pocket bluetooth. I have emailed tobias as follows and am awaiting a reply. Was wondering if anyone has faced similar problems:
Tobias,
Thanks for all the hard work in getting these tools working. I have just bought an XDAII with the latest 1.60.00 ROM using the 1.10.00 radio version.
At the same time, I have a WIDCOMM bluetooth dongle on my PC which supports numerous profiles including the headset profile, which allows me to use the PC's speakers and mic as a 'headset' with the XDAII.
I set up the XDAII with the PC, using the built-in bluetooth bonding and pairing application and managed to get it all working fine with the PC using the speakers and the mic as the headset, with the phone automatically transferring the call to the PC when the 'Bluetooth Headset mode is enabled' shows on the today screen. Furthermore, activesync also seems to work fine too.
After installing Pocket Bluetooth Tools, the headset stops working. Before installing it, I unpaired the device by deleting it from the list of paired devices. After installation and going through the process of pairing the device again, it correctly gives me the option to choose the Serial Port, ActiveSync, Modem, and Headset profile. I select all of these and click on OK. Once this happens, my PC gives me a message saying that the XDAII has connected with the headset. However, this doesn’t happen once but goes into a continuous loop giving me notifications every 2-3 seconds that this is the case. Furthermore, when making a call to see if the voice has been transferred to the PC< this stops working and the XDAII's speaker and mic continue to be used. The only way to stop the constant loop of connections is to switch off the bluetooth radio on the XDAII. Furthermore, when deleting the pairing from the XDAII this constant loop continues.
Have you faced this issue previously, as I think it may be a bug. The only reason I installed pocket Bluetooth is that my current b.tooth headset is a Nokia HDW-30 that supports the handsfree profile and your documentation states that Pocket Bluetooth tools supports this profile.
Let me know if there is a fix for this.
pap[/quote]
Why not email the author, he is most helpful.[/quote]
maybe just because he doesn't answer
i wrote a very long report some days after the long awaited new version came out in april, but haven't got any reply. (maybe my email got lost - who knows ...)
i have exactly the same problems. i also have a parrot ck3000 (tried with firmware 3.11 and 3.13) and an mda2 with rom 1.6.00GER and extROM 1.60.07. the two devices pair, and sometime i can even select the "headphone profile" afterwards. i even managed to make it work ONCE, after several hours, of installing, reinstalling, pairing, reparing, ect, ect ...
what did work once was making calls. but after the first call came in, i could answer it, the caller could hear me, but i couldn't hear anything. this happened twice and then i just turned off bt and used the mobile as always.
as i'm using my mda in my car for work and not for fun this is no solution for me . i went back to the original bt stack that works quite well. i can make and take calls w/o any problems.
one thing i'd like to see changed (as soon as parrot and mda work together) is, that ALL calls are made via the handsfree, as, as long i'm in the car it HAVE TO use the handsfree by law (and it's much more comfortable anyway). it's not practicle to dial with the mobile, and then by pressing the green button on the parrot to move the call to the handsfree. but that's the only way you can do it when using speeddial.
another thing i desperately miss is a way to change the volume of the handsfree. i could do this using the volume slider of my nokia 6310, but volume stays all the same when using the mda. and it's just too low when doing higher speeds on the autobahn
of course voice dialing would be a great feature to have ... but it's not that necessary.
please don't get me wrong .. i'm don't want to be ungrateful as i'm not paying for this software - i just want to help ppl by saying that they are not alone with their problem and they should give up wasting their time and better wait for a new release....
and of course i'm very willing to PAY for that software as well as soon as it is any improvement over the original bt stack (for me of course. for most of you it already is)
maybe TOWA could say some words here. that would be really appreciated.
thanks anyway a lot to all ppl that spend their free time developing software and providing it to the comunity!!! thumbs up !
regards ize|man
Bluetooth tools and ROM 1.72
Does ROM version 1.72 require TOWA's bluetooth tools? In this ROM, there are options for COM port selection etc under Bluetooth settings and the clubimate site mentions bluetooth improvements. Anyone with this info?
other com settings then
Inbound COM port com4
outbound COM port com5
??
if so what are they?
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
faisal said:
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
Click to expand...
Click to collapse
These are the ports for BT beaming, as I understand! (not for BT GPS).
For BT GPS you do not specifically need BTHTools anymore (since 1.66) because WM can install a BT GPS com at first bonding.
Something is different however (vs BTHTools) since with 1 application (Alturion) I can not get the BT GPS working anymore, which can also not be solved by still installing BTHTools!! (while I have no problems with my other application TT. Figure that out?!)
Ronald
I now have the same problem, the parrot ck3000 was working until I insatlle dthe bluetooth tools, and now it doesn't.
Its a shame I did not see this thread before
Will the 1.72 rom work with both parrot and my emtac bluetooth gps?
Cheers
Justinp
justinp
have you tried uninstalling Bluetoothtools?
no not yet, I might give that a go, but then my gps wont work :?
justinp said:
no not yet, I might give that a go, but then my gps wont work :?
Click to expand...
Click to collapse
I think it will still work!
With my working application (TT3) I see the GPS on COM5 (installed by WM) + on COM7 (installed by BTHTools) + on the BT/SIRF interface!
If I uninstall BTHTools I only loose the selection for COM7. The other two selections still work!
Of course you must have acknowledged the WM com installation with first bonding (in any case for the serial operation)! My BT/SIRF connection always works in TT3 regardless of WM/BTHTools installation of serial ports.
Ronald
I'm also having that strange problem with the parrot CK3000. I did install the previous version of BT but I don't see any difference with or without BT. But when I de-install and want to go back to the original state, the same problem persist. Is there any way to download anyware the original Bluetooth stack without re-install everything (and loosing all my settings and software)?
Thanks for helping out.
Frank.
The Introduction: So I've been researching this for awhile now and I haven't been able to come up with any answers except try a hard reset. I just flashed over to Silence's new Pro. 6.5 CE ROM and set everything up when this reared it's frustrating head so I'd like to avoid that.
The Phone: HTC Touch Pro(Sprint), Silence's WinMo 6.5 Professional CE.
The Problem: My phone doesn't seem to recognize that I've plugged in head phones. Nothing doing in Windows Media Player or Pocket Player. I tried calling to the phone but it just rings through the speaker. Tried plugging the head phones in before starting the music player and while music was playing with same results. I can charge my phone and connect to my PC with ActiveSync so it's not the whole connector. I tried a new set of head phones at the Sprint store and they didnt work either. I can't find my 3.5mm adapter or I'd try some regular head phones though I doubt they'd work.
The Dénouement: Anyone know of a fix to this or a way to check the registry entries that control audio or whatever? Not that I know how the registry should be set up, I was just really hoping for a glaring error or for some entries to be completely missing. Barring that, any great deals on Bluetooth headphones out there?
The Thanks: All help is greatly appreciated. Thanks.
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
I bought a bluetooth dongle on Amazon (ORICO BTA 403, CSR8510 A10 chipset) and installed it on my Windows 7 x64 computer.
The dongle installs fine and works perfectly with all my older phones but not with my Xperia S running Android 4.1.2.
Basically, if I install the automatic windows driver, and pair with the phone, windows complains about no drivers for the device, and I can't do anything with it.
If I install the supplied software (CSR Harmony wireless software stack) I can pair and the Xperia S is installed properly, the various audio services work (I can stream music to PC using BT), but I still can't send or receive files, either from PC to Phone or from Phone to PC.
The connection times out after a second and gives me a connectivity error. It's like the phone refuses to connect to the PC, both when transferring and receiving.
I don't know if the phone is the problem, it seems to not work only when doing file transfers with PC, if I try to transfer files to other phones or to my mac (which has built in BT) it works fine.
Is there any way to fix this issue? Any way to troubleshoot this issue to tell if the problem comes from the phone or the dongle?
Searching with google I can't find any solution, I just get lost into a sea of bluetooth problems which have nothing to do with what I'm experiencing.
By the way, using Airdroid instead of BT is not a fix.
Csr8510 a10
MarkMRL said:
I bought a bluetooth dongle on Amazon (ORICO BTA 403, CSR8510 A10 chipset) and installed it on my Windows 7 x64 computer.
The dongle installs fine and works perfectly with all my older phones but not with my Xperia S running Android 4.1.2.
Basically, if I install the automatic windows driver, and pair with the phone, windows complains about no drivers for the device, and I can't do anything with it.
If I install the supplied software (CSR Harmony wireless software stack) I can pair and the Xperia S is installed properly, the various audio services work (I can stream music to PC using BT), but I still can't send or receive files, either from PC to Phone or from Phone to PC.
The connection times out after a second and gives me a connectivity error. It's like the phone refuses to connect to the PC, both when transferring and receiving.
I don't know if the phone is the problem, it seems to not work only when doing file transfers with PC, if I try to transfer files to other phones or to my mac (which has built in BT) it works fine.
Is there any way to fix this issue? Any way to troubleshoot this issue to tell if the problem comes from the phone or the dongle?
Searching with google I can't find any solution, I just get lost into a sea of bluetooth problems which have nothing to do with what I'm experiencing.
By the way, using Airdroid instead of BT is not a fix.
Click to expand...
Click to collapse
Hi
I just purchased a similar BT usb dongle to use with my Windows7 32bit laptop, model name/number BTA-CSR4B5 Inateck USB Bluetooth 4.0 Low Energy USB Adapter USB 2.0 Wireless Bluetooth Adapter with LED Indicator For PC Desktop Computer Laptop Notebook, Compatible with Windows XP/ Vista/ 7/ 8 & Bluetooth 3.0/ 2.0, Support Bluetooth Stereo.
I want to use it for streaming audio to my headphones, I have successfully installed application/drivers with no problems then plug in dongle which searched & installed from windows more drivers which in compatibility mode and run as administrator installed ok, but then when i pair my BT headphones again auto search tries to find & install more drivers but always fails so i cannot get audio connection from laptop to BT HP's although there is a BT connection between dongle & HP's, I have tried another pair of BT HP's but get the same problem. any help from any1 most appreciated. BTW how did u get on with your problem?
i will try to upload some screen grabs hopefully yourself or any1 else maybe able to help me, solve this problem. thanks in advance.
Adeo63 said:
Hi
I just purchased a similar BT usb dongle to use with my Windows7 32bit laptop, model name/number BTA-CSR4B5 Inateck USB Bluetooth 4.0 Low Energy USB Adapter USB 2.0 Wireless Bluetooth Adapter with LED Indicator For PC Desktop Computer Laptop Notebook, Compatible with Windows XP/ Vista/ 7/ 8 & Bluetooth 3.0/ 2.0, Support Bluetooth Stereo.
I want to use it for streaming audio to my headphones, I have successfully installed application/drivers with no problems then plug in dongle which searched & installed from windows more drivers which in compatibility mode and run as administrator installed ok, but then when i pair my BT headphones again auto search tries to find & install more drivers but always fails so i cannot get audio connection from laptop to BT HP's although there is a BT connection between dongle & HP's, I have tried another pair of BT HP's but get the same problem. any help from any1 most appreciated. BTW how did u get on with your problem?
i will try to upload some screen grabs hopefully yourself or any1 else maybe able to help me, solve this problem. thanks in advance.
Click to expand...
Click to collapse
your problem is bare and I think you can try these two solutions out:
1- Restart your phone and check whether your problem has solved or not. 2- Restart your windows and also turn off your Antivirus and firewall and try again.
fa2020 said:
your problem is bare and I think you can try these two solutions out:
1- Restart your phone and check whether your problem has solved or not. 2- Restart your windows and also turn off your Antivirus and firewall and try again.
Click to expand...
Click to collapse
1.Its not a phone its Headphones. 2.Restart made no difference plus Antivirus/firewall not the cause, seems to be a driver problem when installing from windows update! Ta all the same.
The problem is ****ty drivers from the manufacturer. I installed Bluesoleil and it worked perfectly. Another solution is to use the Windows stack by manually installing drivers from the MS Windows Mobile Suite (or whatever it's called, I don't remember) but that only supports file transfer.
I'm a little lost. Been trying to get this thing working and Nada. I can connect for a short few seconds. Then it disconnects. From all the videos I've seen, drivers install. But not here. It says Galaxy S5. But no driver pop up. I've uninstalled and reinstalled drivers. Still nothing. I've installed the newest Bluetooth drivers for My Dell PC and still. What's going on? Any ideas
Anyone?
nFiniti said:
I'm a little lost. Been trying to get this thing working and Nada. I can connect for a short few seconds. Then it disconnects. From all the videos I've seen, drivers install. But not here. It says Galaxy S5. But no driver pop up. I've uninstalled and reinstalled drivers. Still nothing. I've installed the newest Bluetooth drivers for My Dell PC and still. What's going on? Any ideas
Click to expand...
Click to collapse
What are you trying to do exactly? Mine connects and works great. It will only connect when it needs to for instance, when sending or receiving a file. It won't stay connected constantly. It's not like a Bluetooth speaker or anything.
Sent from my SM-G900T using Tapatalk
well with windows 8 your able to use the pc as hands free device as well as use pc fof phone audio like streaming music.
https://www.youtube.com/watch?v=JpKQIdGu3cU
once 8.1 hit millions of bluetooth drivers were damaged. its an obvious common problem but some say they have fixed it by installing drivers. i have the latest drivers from dell... for some reason drivers never installed on my pc for the S5. it was just there. it happened so fast. i did pair it without internet at first. but since have uninstalled an attempted to re connect so drivers will reinstall. im on the verge of picking up an external bluetooth dongle to try it out.
nFiniti said:
well with windows 8 your able to use the pc as hands free device as well as use pc fof phone audio like streaming music.
https://www.youtube.com/watch?v=JpKQIdGu3cU
once 8.1 hit millions of bluetooth drivers were damaged. its an obvious common problem but some say they have fixed it by installing drivers. i have the latest drivers from dell... for some reason drivers never installed on my pc for the S5. it was just there. it happened so fast. i did pair it without internet at first. but since have uninstalled an attempted to re connect so drivers will reinstall. im on the verge of picking up an external bluetooth dongle to try it out.
Click to expand...
Click to collapse
Hmm never knew that, I will try it out on my computer and see if it works. I do have an external dongle I can try too.
I do know that the windows drivers for the external dongles never works right so you have to download the newest from broadcom. But I lost mine so I can't try it now with Windows 8.1. Things like headphones wouldn't work without. I'm not sure if its lack of proper drivers for My Bluetooth on my Dell with Windows 8.1. Trying to find someone with an external to try. I use that every day in my car since my head unit is a dell computer.
nFiniti said:
I do know that the windows drivers for the external dongles never works right so you have to download the newest from broadcom. But I lost mine so I can't try it now with Windows 8.1. Things like headphones wouldn't work without. I'm not sure if its lack of proper drivers for My Bluetooth on my Dell with Windows 8.1. Trying to find someone with an external to try. I use that every day in my car since my head unit is a dell computer.
Click to expand...
Click to collapse
So I think I figured it out.
It is NOT your computer. It is the phone. Either Samsung or T-Mobile tampered with the bluetooth services it is capable of. Meaning, if you try to use your phone for Bluetooth tethering, you will notice its not an option. This is because inside the /system/lib/hw folder, one of the lib files that controls Bluetooth communications with the hardware is telling other devices that is connected that only Contact Syncing and File Transfer services are available. I would attempt to flash an AOSP ROM, and check if you get any better results. If so, I may be able to hack the lib file to allow us to use more services. I remember I did this on the S4 to allow Bluetooth tethering so I hope its as easy for other services. I just need something to compare so if It works on AOSP I can compare with the lib file from there.
I do need to update the phone. Just so happy I got tethering without T-Mobile s bs telling me how much I can use. Don't wanna mess up lol.
Flashed the xtralite ROM .. Still have issues
I bought a new Bluetooth dongle. Damn 20 dollar dongle. Well it works. Not completely. Its missing the hands free portion.
nFiniti said:
I bought a new Bluetooth dongle. Damn 20 dollar dongle. Well it works. Not completely. Its missing the hands free portion.
Click to expand...
Click to collapse
Which ROM is this on?
Sent from my SM-G900T using Tapatalk
I'm currently using the ... What is it called. Its the slimmed down ROM. Like 500mb download size and you can install what addons you wish. Before I don't know what I was on. J don't really change roms a lot if its working flawless. The new cheap dongle i just got is working fine. Enough... Lol BT stereo works nice most of the time and will bring up a media player looking window with track info even using things like I heart radio. Hands free works but I don't have an on screen dialer. Have to initiate the call with the phone. Unless I'm missing a program I could use.