Related
Since two days I got the problem, that I can not activate Bluetooth anymore. On the settings "Wireless & network setting" I press the Bluetooth activation (Turn on Bluethooth). The status changes to "Turning on ... " for about 10 seconds, but doesn't turn on. Before was working fine, I do not remember to have something deleted.
It seems to me, as if Bluetooth is switched off (or disabled) by some application.
Would like to isolate the problem. Any ideas how I can find out.
- Log file
- command line
- etc
1.ATRIX-in-PT said:
Since two days I got the problem, that I can not activate Bluetooth anymore. On the settings "Wireless & network setting" I press the Bluetooth activation (Turn on Bluethooth). The status changes to "Turning on ... " for about 10 seconds, but doesn't turn on. Before was working fine, I do not remember to have something deleted.
It seems to me, as if Bluetooth is switched off (or disabled) by some application.
Would like to isolate the problem. Any ideas how I can find out.
- Log file
- command line
- etc
Click to expand...
Click to collapse
Do you have anything frozen through titanium backup? Have you installed any apps that use Bluetooth? I had an issue with car home locking my Bluetooth up when I undocked it. Telling Car home to turnoff Bluetooth once disconnected fixed mine. If all else fails and you cant figure it out, I would try flashing back to 1.57 and then OTA update it back to 1.83. Last resort of course so you don't have to set your phone back up, titanium backup can make this process easier.
If nothing works then may be a hardware issue. Best of luck.
Just wait before you get into it, another person may have better advice!
Dirtburgler said:
Do you have anything frozen through titanium backup? Have you installed any apps that use Bluetooth? I had an issue with car home locking my Bluetooth up when I undocked it. Telling Car home to turnoff Bluetooth once disconnected fixed mine. If all else fails and you cant figure it out, I would try flashing back to 1.57 and then OTA update it back to 1.83. Last resort of course so you don't have to set your phone back up, titanium backup can make this process easier.
If nothing works then may be a hardware issue. Best of luck.
Just wait before you get into it, another person may have better advice!
Click to expand...
Click to collapse
Hi. I installed a Bluetooth Transfer app. This was the reason, why I found out that Bluetooth wasn't working anymore. But I know for sure that Bluethooth was running fine, just a few days ago.
I really would like to find the reason, quite sure there is a software reason, and defenitly do not want to flash back.
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
jdommer said:
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
Click to expand...
Click to collapse
Mine vibrated yesterday and now it wont vibrate. If you scroll down from the top on your home screen, click the icon in the top right corner, that should bring up your wifi, airplane mode, gps, battery, etc icons. If you scroll down to audio profiles, there is one called meeting that has a picture of a phone vibrating. That should make calls and messages vibrate your phone. You can also manually turn them on because if you go to settings/device/audio profile/settings for general where you can select vibrate plus ring, and if you scroll down there is an option for vibrate on touch. Even though I have both these settings checked, and they used to work, they are no longer working. I tried a factory reset, and that didn't fix it. Now, when I power on my watch, I get a message that says headphones disconnected. It seemed to stop working after I started getting this message, not sure if that is normal or if it has anything to do with it. I will let you know if I figure out a way to get mine vibrating again, but for now it looks like mine could be broken. Can anyone else chime in on this if this has happened to you?
flimmyflam said:
Mine vibrated yesterday and now it wont vibrate. If you scroll down from the top on your home screen, click the icon in the top right corner, that should bring up your wifi, airplane mode, gps, battery, etc icons. If you scroll down to audio profiles, there is one called meeting that has a picture of a phone vibrating. That should make calls and messages vibrate your phone. You can also manually turn them on because if you go to settings/device/audio profile/settings for general where you can select vibrate plus ring, and if you scroll down there is an option for vibrate on touch. Even though I have both these settings checked, and they used to work, they are no longer working. I tried a factory reset, and that didn't fix it. Now, when I power on my watch, I get a message that says headphones disconnected. It seemed to stop working after I started getting this message, not sure if that is normal or if it has anything to do with it. I will let you know if I figure out a way to get mine vibrating again, but for now it looks like mine could be broken. Can anyone else chime in on this if this has happened to you?
Click to expand...
Click to collapse
I cannot get my vibrate to work again, if anyone has experienced this, please reply and let me know how to fix it, for now, i am giving up, and extremely disappointed
jdommer said:
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
Click to expand...
Click to collapse
It does vibrate. But very few things use that function it seems. I was thinking about setting up a tasker script to vibrate on any notification.
mortis2600 said:
It does vibrate. But very few things use that function it seems. I was thinking about setting up a tasker script to vibrate on any notification.
Click to expand...
Click to collapse
Anyone have any ideas on how to get mine vibrating again? I've done the backup and restore option, is that how you do a proper factory reset, or is there another way I can try to get this thing to start working again?
update: Just flashed 1900_20140120 firmware using the excellent guide on here, and still no vibrate
flimmyflam said:
Anyone have any ideas on how to get mine vibrating again? I've done the backup and restore option, is that how you do a proper factory reset, or is there another way I can try to get this thing to start working again?
update: Just flashed 1900_20140120 firmware using the excellent guide on here, and still no vibrate
Click to expand...
Click to collapse
Mine started working. Not sure why; I tried to reset to factory and despite following the directions and watching Loki's video, i managed to lock the watch up. Popped the battery, put it back together, wiped the device. Now it vibrates and that is good. Just wish i knew what I had did that fixed it.
Thanks all!
Jd
Mine does not vibrate either, never did.
I tried with the stock firmware, Loki's firmware, stock with enhanced security... no luck...
Thoughts?
jdommer said:
Mine started working. Not sure why; I tried to reset to factory and despite following the directions and watching Loki's video, i managed to lock the watch up. Popped the battery, put it back together, wiped the device. Now it vibrates and that is good. Just wish i knew what I had did that fixed it.
Thanks all!
Jd
Click to expand...
Click to collapse
stanelie said:
Mine does not vibrate either, never did.
I tried with the stock firmware, Loki's firmware, stock with enhanced security... no luck...
Thoughts?
Click to expand...
Click to collapse
Mine started vibrating again. I went to take the battery out, but couldn't get the screws off, so I gave up, when I rebooted, all the sudden vibrate worked again. Not sure if it was powering it on and off a few times, or shaking it around, try taking the battery out and putting it back in if you can, if not, just try turning it off and then on and maybe lightly shaking it around
Well,
It looks like a bad electrical contact, I've downloaded an app called "vibrater" that does just what it says, and it won't start the vibrator until I lightly tap the watch on it's side while the app is turning the vibrator on.
But it does not stick. I guess I will have to return the watch to have it fixed...
Until tonight, I thought the TrueSmart just didn't have a vibrator...
Vibration doesnt work
Hey, just received my Omate Trusmart! (Kickstarter edition)
Overall I am extremely happy with the watch, but there are a couple of major problems:
1. The vibration doesn't work, I have tried rebooting, factory restore etc but nothing seems to work. Does anyone know a fix to this or is it a hardware problem?
2. My screen has very faint dark spots in the center. Looks like a manufacturing defect.
Is it possible to return the watch to get a replacement? I havent opened the back cover yet.
Thanks.
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
UPDATE: I'm an idiot / Samsung's instructions on how to do a hard reset are awful.
I decided to Google how to do a hard reset and discovered that when in the Recovery Menu, you need to hold down the Power button to choose an option (Samsung's instructions just tell you to press the Power button until you highlight what you want and I assumed it would automatically choose that after a few seconds because the phone would restart for me). Watch is now factory reset and so far the screen issue appears to be resolved. Another four hours of transferring music it is then.
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
allow to power down
BOZG said:
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
Click to expand...
Click to collapse
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
theroblog.com said:
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
Click to expand...
Click to collapse
samsung gear s screen on and off..looping
There you go. Not much to read there though as it's just me and OP. The problem re-emerged for me after a few days again so I was forced to do another hard reset to actually use the watch. I noticed it when I woke up in the morning and noticed that another update had been pushed to the Gear app. That's twice now that this has happened shortly or immediately after the Gear app was updated.
I haven't been able to uninstall an app / change clock face to see if it works as the watch is completely unusable when it happens to me. The Gear app registers that it's connected but it's impossible to change anything from there either and if I turn the watch off and back on again, the Gear app will no longer connect.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Not sure if I've actually tried letting the battery drain. I'll try that the next time it happens (if it happens).
I had the same problem after the update, a reboot didn't solve the problem. Eventually the battery drained. After a recharge most is fine but I never know which watch face will suddenly appear.
Same issue again. Didn't see the Gear app updating but there was an update released the day before. Going to switch off auto-updates and see if it definitely the problem. Just seems too coincidental that this problem starts right after an update is released for the Gear App.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Started doing it again yesterday so let the battery die and charged it fully and it didn't help. Left it on the box overnight and brought it to a Samsung Service Centre this morning and of course it was working again when I took it out of the box! Left it with them anyway so I'll see what happens.
I've had my Gear S a few weeks and it has also started doing this, I will give some of the suggestions here a go.....
EDIT: So opening the Gear Manager App once Bluetooth was connected brought my Gear S back to life. Phew!
It's only entered this state after I turned it off at night and then turned it back on in the morning - so it had been off roughly 8 hours. Upon turning it on the screen would cycle from the right time and notification numbers and the wrong time and wrong notification numbers too off again.
@ BOZG - Just wondering if you got your S back yet and if so, were they able to tell you what was causing this on/off problem. Mine just started doing it yesterday.
Also, how did you find the "Samsung Service Centre"?
holding the screen seems to cause it...
Had to send mine to Samsung for a new charging cradle and they updated the software to latest, when i got it back it seemed fine. Then i was messing about with it and was holding the screen to my chest for a while and that seemed to cause it to happen. It seems to be the screens gets too much activation and it flips out. I think this is what started the problem last time it happened.1
Switching to power saving mode seems to fix it for me... have to wait until it gets low on battery and when the low bat warning comes on, switch then... leave for a bit then switch back to normal.
I called Samsung Thursday and they sent me a UPS label and told me to send the watch, charging cradle and AC charging cord back in for service. She told me it takes about 7-14 days. We shall see.
Happy to have found this. </rant>I'm starting to get enough of this Samsung stuff. I had the note 2 and now I have the note 4 and gear S. That is mote then 1000 euro of equipment. And today when I tried the restore to fix this, both the phone and the watch rebooted. Crazy that they can not build good software and hardware for this price. </rant>
To me it seems that is freezes somehow when this happens. It kept jumping back to 22:10 time and changed to the watch-face and settings keep rolling back. It seems to happen to me, when the watch is off for some hours. The samsung way... no update to fix this.
solved for me
hi first of all sorry if i do any mistakes because English is not my language
i had similar problem and i found the solution at least in my case . THE PROBLEM IS NOT WITH THE GEAR S
all was ok using 4.4.2 kitkat on my note 3 before few months i upgrade with lollipop 5 official from sammobile via odin
from that moment the problems begin with the reconnection of the gear with the note
long time to connect and no auto reconnection only manual by turning off-on the bluetooth
i was boring to do format to the note3 so i left it as it
few weeks ago probably of gear manager update the gear start freezing and the screen turning on and off
first i do a factory reset and the gear was ok for a while but after it do the same but the next time the screen was not ok the colors was different so i send to service in Athens
the service in Athens is very fast and very helpful , is one of the reasons that i will difficult go with other manufacture , so they return me the gear saying that they change the motherboard and now there is new imei
but the gear that they send me was brand new except the band and the box. BUT after some time the same problem ..... i call them and they tell me to send it back so i send it and i receive it again but this time the say that the watch is ok
GUESS NOW .... i turn it on and after a while of the connection with my note AGAIN the same problem the screen on and off and freezing plus was overheat underneath
i was ready to call them and to say few words but they was closed ..... then i search the net and i found this post and i thing probably is not the gear the problem ,no hardware problem, i decide to do a test
i download the last working rom to my phone 4.4.2 and magically the problem disappears .... but now there is a software update on my phone lollipop 5 so i do the update and i was ready if the phone cause again the same problem
to return and stay with 4.4.2 But now all is ok the problem solved .... now is more of 24h and all are ok
i hope this will work for you also
Same problem
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
JALUK said:
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
Click to expand...
Click to collapse
Ok but doing a downgrade and all working ok you can do update again.... i am not with 4.4.2 i went to the latest 5.0 for me now and all are ok.
Maybe something was wrong with the update procedure.
UPDATE
the touch function of the 2nd gear stop working so i send it back and they send me new device
for a few days all was ok . But today when i restart the phone while the gear was disconnected the problem with screen turning on repeatedly appears again .
for sure is not problem of the gear , this is the 3rd device in my hands, something is wrong with the gear manager software .
i have also reconnection problems .... if the phone is far away and they lost Bluetooth connection the most of the times i must reconnect manually , the gear say disconnected but the note think is still connected
I wonder has anyone tried to reset the watch as a stand alone device and see if the problem happens? I know you might lose a lot of the blue tooth functionality but I think I will test it and see if the problem still happens.
Hi, I need your help, sorry for my english.
So, today, first thing in the morning that I did (as I do every once in a while) was to install any app updates that I had, and everything went well... until the afternoon, when I woke up from a nap, I went on to use Whatsapp and the app suddenly said that it had stopped (you know that message that appears every once in a while). I went in and opened it again, but this time it gave me the option to restore my conversations and stuff, but I closed the app knowing that it would take a lot of time, and I restarted my cellphone. That probably was a mistake.
It only turned off, it didn't turn back on, which was confusing but I thought 'oh well, I must have not clicked on 'restart''. But as soon as I turned it on, several messages of other apps started to say that they had stopped working. I tried restarting it again, and then it said that it wanted to update my Android software, but it didn't finish because there was a mistake (I didn't touch anything), and then it just stopped working correctly, and it turned itself off, and you know, when you turn it on, the first thing that appears is 'Samsung Galaxy s4 Mini -----', but after a while it didn't appear anymore. And that's where we are.
The first thing I thought was to go for my USB cable to try and format my phone, but I didn't know that the phone had to be on to do that.
Then I tried to do the hard reset thingy that I read on the internet, but that doesn't work either.
I tried charging the battery for a very long time, I took the battery out, put it back in, everything.
The thing is, when I turn it on, it vibrates as it normally does, but it just doesn't work.
Hopefully someone can help me!!!!!!!
Ok so to start off im gonna give you some information: my phone was rooted with magisk and it was running b360, it worked just fine until one day my wifi kept turning it's self off for no reason.That kept happening but not very often so i didn't mind it. Today my wifi wouldn't start at all(the switch thingy went blue then gray immediately) again and if i tried to turn it on again my phone would reboot.I then unrooted and went into safe mode to see if it would fix the issue but it was the same, so i tried recovering my data from twrp. That didn't fix anything once again, so i did a factory reset(that prolly screwed me over big time) after the factory reset i realized that my phone wouldn't finish the setup thing because it needs to connect to the internet to check for new updates. So my issues are that i can't seem to be able to access my phone through adb since when i use "adb devices" it doesn't show my device, and that my phone is basically unusable right now since it wont get past the "checking for updates" phase. So what should i do? Any help is appreciated!
*update*
I got past the "checking for updates" phase and i completed the setup by sheer luck(my wifi worked for a couple of seconds), but the problem still persists. My wifi can't be turned on, or when it turns on it stays like that only for a couple of seconds and then goes off again also my phone crashes from time to time aswell(usually when i mess with the wifi, but sometimes it just does it on it's own).
I know is abvious, but is WiFi+ turned on? That can turn off your WiFi for you if not near a saved hotspot. Could be a confusion between this and location services.
UrbanBushman said:
I know is abvious, but is WiFi+ turned on? That can turn off your WiFi for you if not near a saved hotspot. Could be a confusion between this and location services.
Click to expand...
Click to collapse
WiFi+ is turned off. From what I've observed so far after i restart the phone i can use the WiFi for about an hour or two, after that it stops turning on. But if i use it for about 20-30 mins, turn it off, and turn it on again after a while when i want to use it again, it works (obv if i use it for 1-2 hours the problem will occur again). So what I've been doing so far is just use it for about half an hour then turn it off until i need it, and repeat. I know that im probably not making much sense right now but i don't know what to do anymore.