Dear list.
I've upgrade my xda to ROM 4.00.11
ROM Date 06/23/03
Radiostack 4.21.00
NOW the VIBRATE doesn't working, when i received an incoming call.
Any suggestion to resolve this issue.
rochliadi
is it turned on in the phone settings ?
Yup I've turn it on.
same problem...please help
In most telephone systems is the vibrate function integrated in the battery.
I don't know if it's the same with de XDA.
If you own another battery try it with the other one!
Mark
I have the same problem. My phone's vibrate function worked for the first two weeks, and now it does not. Everything on my device is stock. I installed a few games, adobe, etc; but I haven't done anything but import my sim to my address book.
I don't know when it stopped, but now my phone doesn't vibrate.... at all. Please Help.
the vibrator on the xda isnt integrated into the mainboard, it is a seperate device which sits in a recess in the edge of the case, it is removable but it is easy to break the retaining lugs when doing so.
Related
Hi
Using a recently purchased used Xda (64mb version). Trying to amend settings for Ornage SIM (machine was supplied already unlocked) the screen froze. Have tried soft and hard resets but nothing. All I have is the Microsoft Pocket PC 2002 screen which doesn't react to anything it appears. Even the battery light doesn't flash although I have fully charged it. Any offers of help out there??
Did you have the xda working with your orange sim? Have you tried unscrewing the top of the stylus and pushing it once in to the hole at bottom right of your xda, then wait one minute and press one time again? You will lose all data.
Yes, I had it working quite well with Orange. Had web browser plus using POP 3 to receive all incoming e mails. Couldn't send e mails though, hence trying to change seetings which is when it all went wrong. Tried soft reset first, followed by hard reset but still nothing other than the welcome screen
And this happens even with the sim removed? Sorry I should have asked that before. It seems to be exhibiting radio stack problems, but if you havent messed with that I dont know if its possible for it to corrupt spontaneously.
Yu, happens with SIM removed
Is there a registry tweak to allow the speakerphone to stay enabled when you close the flip? Currently it ends the call.
I believe the same thing happened with the old MPx220 and the MPx200 but nothing was ever figured out for these phones.
I would like to know this as well.
Bump - Speakerphone while lid closed...
Any news on this?
My Googling is telling me thus far - NO! NO! and NO!
Any Russian Gurus care to negate this?
speakerphone
Ok, I am trying to figure this out, here is what I have so far,
I have two 3125's, one was running an old dopod rom and the other the most recent Cingular release. (will get numbers later)
On the old phone, if I hit the "lock keys setting" (press and hold home button), while on a call with the speaker phone on, I can close the phone, the call continues and the outer display shows the call info (ie, who the call is to and connection time)
One the newer phone, with the same setting, the phone just hangs up when you close it.
I backed up the old phone with sprite backup, then ran sprite on the newer phone thinking maybe the registry setting would carry over (in case I was missing something), but the newer phone still just hung up when closed during a call.
After several rom changes I remembered why I quit using the old phone, the charging port came loose and does not work, so my guess would be that the old phone stays on due to the broken charging port, what leads me to this is of course if you have the headset in, the phone can be closed while on a call.
Where does that leave us? It would seem that the issue is not a registry value change (although I won't give up on trying to find one) but a software issue and until someone figures out how to change it were are stuck with no closed speaker phone.
Hello,
I've got my HD2 for 7 months. Since I bought it I'm experiencing a small difficulty concerning voice calls and light sensor.
When calling, the light sensor detects proximity of my head (ear) and when the phone is close enough, display darkens and locks to avoid pushing buttons by cheeks and such stuff. That's quite handy sometimes.
My issue is, that when I put my HD2 next to my head (enough to darken the display) while dialing someone, the second when the dialed number accepts the call, my HD2 automatically hangs up.
If I dial the same person again without putting HD2 next to my head, the call connects and everything is OK.
So my question is, what is the reason for my HD2 to automatically hang up when the display is dark and how to avoid this situation? Is there some registry fault and fix or something similar?
It's driving me pretty crazy Please help.
Thanks in advance, Pete.
I think its a registry thing. I never experienced this, although i hear a lot of people complaining about it.
Solution to the issue
So finally after consulting few people over the internet, I've come to satisfying solution.
The basic idea is to backup, wipe everything out using hardreset and then restore everything back to its original state.
As backup&restore software I used SPB Backup 2.1.
I've done 3 tests: before reset, after reset&before restore, after restore.
First one went bad, as expected, second and third ones went good....
So everything solved, thanks for your attention
Hallo!
I have a mysterious Problem:
When i make a call than is the Display on and active - I can activate the speaker an so on.
IF i get a call the Display is aktive so long as i take the call. Then the Display gets dark and inaktive. So it´s inpossible to activate speaker or others. Pressing ANY! Key is not succesfull, intead the right - but THEN, the Call is over...
I tried the system, two other SimCards, Regitry-Hacks, flashing other Rom´s!
Nothing solve this Problem....
Mysterious: After flashing a new SystemRom, one or two times ist works, but than it´s like before.
ALL other functions are OK, so a hardware-Problem is unrealistic.
The HTC-support has also no idea (change the SimCard....).
It is NO other Software installed and i tried the original ROM´s from T-Mobile (win6.5) and some other Rom´s (like Duttys).
WHAT can I do?
make sure there's nothing blocking the proximity sensor during the call.
second day and already have many problems:
1. ringtone turned off vibration only. still have ringtone with incoming calls
2. making calls screen turned off once near ear. moving away from ear doesn't turn on the screen. try any button nothing works. have to turn off power to cut
3. smart stay isn't smart. screen still turned black even with bright environment
Am I unluckily with a faulty phone or they are known bugs? thanks
Not to sure mate
I have had NONE! of the problems that you have had, although i have had a few problems e.g. the turn to mute media stopped working and things like that, all i had to do was a restore and it is fine now, i was speaking to the people at the carphone warhouse (phone shop in the uk) they said they have only had 1 return since launch and that was because the screen wasnt big enough and they went for the note, i have also always found that samsung is happy to help you if you have a problem with your phone just give them a ring.
1: you need to explain exactly what you changed.
2: It's supposed to go off near ear because uses proximity sensor to save battery turning screen off.
3: Smartstay just doesn't work as well as it should do.