[Q] HD2 Phone-Problem Display is OFF - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hallo!
I have a mysterious Problem:
When i make a call than is the Display on and active - I can activate the speaker an so on.
IF i get a call the Display is aktive so long as i take the call. Then the Display gets dark and inaktive. So it´s inpossible to activate speaker or others. Pressing ANY! Key is not succesfull, intead the right - but THEN, the Call is over...
I tried the system, two other SimCards, Regitry-Hacks, flashing other Rom´s!
Nothing solve this Problem....
Mysterious: After flashing a new SystemRom, one or two times ist works, but than it´s like before.
ALL other functions are OK, so a hardware-Problem is unrealistic.
The HTC-support has also no idea (change the SimCard....).
It is NO other Software installed and i tried the original ROM´s from T-Mobile (win6.5) and some other Rom´s (like Duttys).
WHAT can I do?

make sure there's nothing blocking the proximity sensor during the call.

Related

HELP!!! PROBLEMS with WM6 Crossbow Underground Edition????

Here's some of the problems that I am having....
1. When using phone, I occasionally cant hang up - whether I use the screen button or the pushbutton - the only thing that lets me end the call is a soft reset. Imagine!!!
2. Yesterday, for no reason, the ringtone for an incoming call played 2x faster than it should have (ie. the speed of the song was doubled)
3. Just after I notice the ringtone song issue, I tried to use voice dial, and the prompts for voice dial were also playing twice as fast, a soft reset seemed to have fixed the problem... lets see if it happens again.
4. After installing WM6 Crossbow Underground, I was having problems not getting ANY calls, so I upgraded the Radio Rom to 2.61.11 and it seemed to work, BUT then I started noticing that I was getting SOME CALLS AND NOT AL CALLS, so I switched back to 2.25.11 Radio Rom
5. Under Regional Settings > Time ...I tried to switch to 24HR mode and using it for a while, I went back in to revert back to the 12HR mode but it wouldn't let me switch back to 12 hour mode.
6. When I touch the screen to Turn ON Flight Mode (shut off the radio), and then touch the screen to Turn OFF the Flight Mode, the dialogue STILL says Turn ON Flight Mode, even though its already ON (it should change to say, Turn OFF Flight Mode).
7. I was just on the phone with someone when a text msg arrived, and it booted me off the call I was on (it hung up).
8. When on a call, I touched the Mute botton on the screen to MUTE the call, but when I tried to UNmute the call it wouldn't let me.
9. Did anyone notice that the SIMPLE LOCK (4 digits) now requires you to click on the unlock button after entering the code? WM5 didn't require this, if you entered the right 4 digits, you were in, without having to press anything else.
10. When I am on a call, and another call comes in (call waiting), I cannot answer or ignore the other call... it doesn't respond to me whether using the touchscreen or the buttons.
And there's MORE that I will post another time.
Any suggestions or solutions, to these problems?
Actually I would recomend you upgrade to Most Beautiful version
I used Underground version, and Office Mobile doesn't work too
Everything is ok here with MB (search with this and you'll find it in piratebay under applications) version
Where is the "Most beautiful edtion"?
ANTC said:
Where is the "Most beautiful edtion"?
Click to expand...
Click to collapse
Uhhhhh, I think he said "you'll find it in piratebay under applications" didn't he?
find it here
here you go link for the rom you want andmany others
http://rapidshare.com/users/EXGZ7T
do you still need to apply the battey leak patch and the other extra stuff you had to do with underground

Please help me with the HD2 loudspeaker...

... it get activated by itself every incall or outcall, I already make hardreset (nothing happends), make MTTY and then install again BsB Beast 7, and the same thing the loudspeaker gets active in every call I do or every call I receive...
... I was thinking, maybe its something about CARKIT MODE, because the display automatically turns Horizontally when a call is Active, by the way, the Beast 7 ROM dont have neather COPILOT nor NAVIPANEL installed. Maybe a hardware problem... hope isn't.

[Q] Xperia Mini (ST15i) proximity sensor issues - Is there a solution?

Hi everyone!
I have a T-Mobile Xperia Mini, 4.0.2.A.0.42 build.
If the phone is in my pocket, and i get an incoming call, when i take it out of my pocket to answer the call, the touch screen is not active. I cannot move the slider on the screen. I have to press the power button to turn off the screen, and after 20-30 seconds i can turn te screen on again, and then i can answer the call. But if i leave the screen on, it does not activate the touch screen, no matter how long i wait.
The second problem is that if my phone is in my pocket with headset connected, and i answer the call with the headset button, it unlocks the screen. So as i walk talking, i press random things on the screen. For example, during a 2 minutes call, i disabled the microphone, got to the main screen, turned a page, enabled the gps and bluetooth via the shortcuts on my screen...
I think this is not how it was meant to work. I think is it a software issue. The service test shows htat the proximity sensor is working. But i can not answer most of my calls.
Is there a solution for these, or should i take it back where i bought it? I cannot update the software, PCC says it is up to date.
I tried factory reset and software reinstall, i got the same results.
I searched the "hw_config.sh" file, thre are parameters for proximity sensor, but i can not understand the functions of them.
I have the same Problem On Xperia Mini Pro SK17i
but when I open the qwerty the screen will light again
Note: I already deleted the software and but it again on my device and the problem solved for just 3 days and it happened again
PLZ help me I love my phone and I want to solve this problem fast
I did not find a solution. Only possibility left is to bring it back to the trader for repair.
Sent from my ST15i using XDA App

[Q] faulty or bug?

second day and already have many problems:
1. ringtone turned off vibration only. still have ringtone with incoming calls
2. making calls screen turned off once near ear. moving away from ear doesn't turn on the screen. try any button nothing works. have to turn off power to cut
3. smart stay isn't smart. screen still turned black even with bright environment
Am I unluckily with a faulty phone or they are known bugs? thanks
Not to sure mate
I have had NONE! of the problems that you have had, although i have had a few problems e.g. the turn to mute media stopped working and things like that, all i had to do was a restore and it is fine now, i was speaking to the people at the carphone warhouse (phone shop in the uk) they said they have only had 1 return since launch and that was because the screen wasnt big enough and they went for the note, i have also always found that samsung is happy to help you if you have a problem with your phone just give them a ring.
1: you need to explain exactly what you changed.
2: It's supposed to go off near ear because uses proximity sensor to save battery turning screen off.
3: Smartstay just doesn't work as well as it should do.

help! accidental touches to the screen during calls

when I use the original oxygenos, I always happens (in each call) that there are unintentional touches the screen that usually make me turn the microphone off or pause the call, all this makes it impossible to make a phone call.
I tried doing upgrades, downgrades, cache cleaning, reset but nothing!
The only way to solve it is to use the CyanogenMod 13 where the bug does not occur but.
can someone help me with this problem ??? I like the stock rom and I would use it without problems
Lock the phone after acepting or making a call, maybe? Ive never had such issues with OOS.
aredpanda said:
Lock the phone after acepting or making a call, maybe? Ive never had such issues with OOS.
Click to expand...
Click to collapse
Yes! the only way is to turn off the phone with the power button after starting the conversation, it is still very frustrating!
If I type a number and make e call the display will immediately go off when I put the phone near the ear. If I just keep it in the hand it will not go off. I guess this is what happen by default. Maybe it has to do with some kind of sensor you turn off on your settings in OOS?
fotjon said:
If I type a number and make e call the display will immediately go off when I put the phone near the ear. If I just keep it in the hand it will not go off. I guess this is what happen by default. Maybe it has to do with some kind of sensor you turn off on your settings in OOS?
Click to expand...
Click to collapse
I think the screen is responsive to the touch in some cases despite the proximity sensor turns off the screen, it's a pretty serious problem, those of OnePlus are willing to fix it, but they will leave at least 30 days.
I do not understand if it is a sofware or hardware problem because with the various tests I did the sersore proximity seems to work fine, but I can not make a phone call without any problems

Categories

Resources