Is there a registry tweak to allow the speakerphone to stay enabled when you close the flip? Currently it ends the call.
I believe the same thing happened with the old MPx220 and the MPx200 but nothing was ever figured out for these phones.
I would like to know this as well.
Bump - Speakerphone while lid closed...
Any news on this?
My Googling is telling me thus far - NO! NO! and NO!
Any Russian Gurus care to negate this?
speakerphone
Ok, I am trying to figure this out, here is what I have so far,
I have two 3125's, one was running an old dopod rom and the other the most recent Cingular release. (will get numbers later)
On the old phone, if I hit the "lock keys setting" (press and hold home button), while on a call with the speaker phone on, I can close the phone, the call continues and the outer display shows the call info (ie, who the call is to and connection time)
One the newer phone, with the same setting, the phone just hangs up when you close it.
I backed up the old phone with sprite backup, then ran sprite on the newer phone thinking maybe the registry setting would carry over (in case I was missing something), but the newer phone still just hung up when closed during a call.
After several rom changes I remembered why I quit using the old phone, the charging port came loose and does not work, so my guess would be that the old phone stays on due to the broken charging port, what leads me to this is of course if you have the headset in, the phone can be closed while on a call.
Where does that leave us? It would seem that the issue is not a registry value change (although I won't give up on trying to find one) but a software issue and until someone figures out how to change it were are stuck with no closed speaker phone.
hi to all xda family, i need ur help please.
i am using imate jasjam hermes 100, i am having an annoying problem with my set. The front buttons of my jasjam stop working suddenly, but the light behind the bottom two call buttons still remains on even i go to stand by time using side power key. Sometimes the screen fades away and a blank white screen appears. It seems to me that the the cell hangs temporarily as after sometime it starts working fine (in some cases i have to soft reset the device). but in the scenario described above my cell is in on state as if someone calls me, i can hear the caller tone. i just wanna ask to all of you that if it is a software problem or a hardware problem and how to solve that.
i am using joshkoss manila2d plane jane version with radio rom 1.16.0.0 and hardspl 2.10 installed. i've also tried tai 6.5 roms, but the problem still exists.
Hallo!
I have a mysterious Problem:
When i make a call than is the Display on and active - I can activate the speaker an so on.
IF i get a call the Display is aktive so long as i take the call. Then the Display gets dark and inaktive. So it´s inpossible to activate speaker or others. Pressing ANY! Key is not succesfull, intead the right - but THEN, the Call is over...
I tried the system, two other SimCards, Regitry-Hacks, flashing other Rom´s!
Nothing solve this Problem....
Mysterious: After flashing a new SystemRom, one or two times ist works, but than it´s like before.
ALL other functions are OK, so a hardware-Problem is unrealistic.
The HTC-support has also no idea (change the SimCard....).
It is NO other Software installed and i tried the original ROM´s from T-Mobile (win6.5) and some other Rom´s (like Duttys).
WHAT can I do?
make sure there's nothing blocking the proximity sensor during the call.
When i got this device i thought how stupid this was and hoped after flashing a custom rom maybe it would eliminate this stupid feature of this device. It seems HTC thinks it's a good idea to turn the screen ON after ending a phone call, WTF?
At work i use my bluetooth headset all day with my phone in my pocket. I will take my phone out, dial the number i want to speak to, press power to turn screen off, put device in pocket and have my conversation. I end the phone conversation with my bluetooth headset and guess what? The dang phone's screen turns on while it is in my pocket. I guess the light sensor has zero effect here! So now since this happens and my device has a timeout of 2min i set before screen turns off my phone accidentally "butt dials" people and without me knowing i'm now calling people randomly while i'm working!
Another case. I have my phone in my car's cupholder, i use bluetooth to make a call with my car, it initiates the call to my phone and again it turns the screen ON to make the call. WHY? I never pressed power on my device to turn the screen on to make a call. So again i press the power button to turn screen off while in call. I hang up the call when i'm done via the bluetooth in my car and again the device turns the screen back ON once i disconnect the call via bluetooth.
I just don't understand the logic behind this? Is this some HTC thing or all android? Coming from iPhone 4 never had this issue so was a first for me with this device. Just don't see the reason or logic for this?
Anyway to prevent this or stop this from happening? I mean isn't that the point of bluetooth to not need to touch your device thus no need for the screen to be turned on????
+1
It seems that this is not a HTC thing because I have the same behavior on my Samsung device. Same problem as well with pocket dialing during/after a call. Really annoying. I had the same thing on my old HTC Nexus One running Froyo, so this is not a new bug. Back then I tried a lot of different apps, and none helped. I even flashed CyanogenMod on it and it didn't change anything.
I really hope someone has run across a fix whether it's an app, a patch or a whole new ROM, because pulling my phone out of my pocket to turn the screen back off TWICE for every call I make or receive is getting to be a pain.
I can't believe this behavior is voluntary on the part of the designers. If it is, please someone explain why.
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
ethanon said:
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
Click to expand...
Click to collapse
Just downloaded but no idea how to use this thing. Not very saavy with this type of stuff. How can I use tasker to turn the screen off when ending a call ONLY while connected to a Bluetooth headset? This is my biggie since it's in my pocket.
Got it to work
Ok, I downloaded Tasker and I'm impressed.
Here's how I got this to work:
1: Create new profile using STATE, then go to NET, then hit BLUETOOTH CONNECTED. Here you can specify if you want only a specific device or any Bluetooth.
2: Set new task: SET plsLock to ON
3: Set exit task: SET plsLock to OFF
4: Create new profile using EVENT, then go to PHONE, and hit PHONE OFFHOOK.
5: Set new task as: SCREEN, SYSTEM LOCK
6: Hit IF, and specify if plsLock is ON
7: Create new profile using EVENT, then go to PHONE, and hit PHONE IDLE.
8: Set new task as: SCREEN, SYSTEM LOCK
9: Hit IF, and specify if plsLock is ON.
You're done.
Since I had the same problem with the wired headset, I also created a profile with HARDWARE, HEADSET that sets the variable plsLock to ON and exit task sets it back to OFF. You can name the variable anything you want and it will still work.
If anyone has a better/simpler way of programming this, please share. I just started using this program and am still trying to wrap my head around the way this is structured.
As this stands, it works... But it's still a patch on something that should be an option in Android.
Let me know what you think.
Ok thank you I'll give it a try. Yeah could never understand why my device thinks it's a good idea to turn screen back on after ending a call via Bluetooth or not? I receive call, I then press power button to turn screen off bit continue my call, the caller hangs up, boom my screen turns on displaying the phone dialer until my time out settings turn screen off. Dumbest feature I swear. Hello phone I pressed power offbutton to turn screen off, get the hint and keep screen off until I press power button and want it back on again. No sense...
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
ethanon said:
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
Click to expand...
Click to collapse
No unfortunately not. I would greatly appreciate that! I would think it's a simple task but honestly I'm very handicapped when it's comes to stuff like this.
Basically a string for tasker that would simply just do this:
When my device is connected to a Bluetooth device whether it be my car kit, headset, stereo headset, etc. and a phone call ends where by me pressing the End Call on screen button, by ending call with car kit, headset, etc, doesn't matter but will make the screen turn off. That's it.
When connected via Bluetooth, a phone call ends, screen turns off.
Now here's a kicker and not sure if this part would be harder. I'm connected via Bluetooth headset or device, I have screen on to manually make a phone call, then while on the call I press the power button to turn screen off while on call and put device in my pocket. Now when the call eventually ends I would want the screen to stay off.
I will read into the link you provided and mess with it somewhere. Thank you for your time and help.
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
ethanon said:
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
Click to expand...
Click to collapse
Correct BUT only when connected to a Bluetooth device. My gripe is on a Bluetooth call, place a call manually then talk on headset, car kit, etc. I press power button to turn screen off then put phone back in pocket, when call ends the phone turns screen back on for some reason. Never understood this?
Hi guys,
I know that someone with some deep knowledge can help with this problem.
I discovered that when I start a call with plugged in headset, and then I switch off the screen, the mic gets lost completely.
The same doesn't happen to the the mic if the headset is not in at all.
However if I start the call without a headset, but if I plug it afterwards and continue the call, then even switching off the screen does not stop the mic.
This behavior started for sometimes now and I am not sure what caused it. I cannot remember or find any relevant setting that may be the cause of this faulty behavior.
My phone (LG G3) is rooted, I use Xposed with some modules and additional tools, so it is possible that somehow I disabled or changed something unintentionally.
Can someone help with an useful advice?
Thank you very much in advance for the reasonable advises and hints!
I think I found the bug myself.
I switched off "Ok, Google" detection and it looks the issue is solved:
Settings-> Google-> Search & Now-> Voice->"Ok Google" detection-> Turn all settings off.