Internet speed? - MDA, XDA, 1010 General

How fast is the network speed when surfing when on the XDA? It dosen't seem any faster than a 56k connection...

nor is it likely to be
http://bandwidthplace.com/speedtest/
here you can test how fast it is
dont think anybody ever claimed that gprs were fast
but it sure faster then the wireless data option we had before which
was max 9600

I agree. The best I ever get is 9600. You can use the GPRS tracker to see average speed. I got to look for the link for it and will put it here.

Related

How to speed up GPRS/EDGE on a G4

well the topics self explanatory
any ideas?
........
faster internet on MDA's
I notice if I overclock the cpu to 247 Mhz it does download a little faster in the phoenix area.
Even you can do a bit faster, it's still GPRS speed. You can not push much speed from it, it's always slow.
The EDGE part should give a bit more speed, but i'm not sure if T-Mobile in The Netherlands has EDGE part. Lucky i have unlimited GPRS, thus no paying for each byte, i don't care much about speed. And there is no time limit or paying for seconds like normal phone. Yes, you can let GPRS online and connected, and you can set Wizard in standby. The GPRS traffic is still going in standby mode!
(i have for example use PocketCHAT, a IRC client. I have set it always online so i can read messages from my friends. The IRC is not disconnected when i put it in standby mode. And very low battery drain too )
GPRS speed is always affected by mobile traffic. When there are more slots free in GSM traffic, GPRS has more room and can go faster. If it's busy, for example in New Year calls, GPRS speed goes down.
GPRS uses unused bandwidth in mobile traffic, that's why it's free compared to normal GSM modem traffic which is forced to use mobile traffic. GPRS don't affect mobile traffic very much, thus in positive way.
That is my theory here about GPRS.

REV A not working for me

what do you enable to get the revA speeds?
I am on the 3.2.3 rom and the .3 radio.
I just ran "mobilespeedtest" and ger 349 to 645.3 kps.
What am I doing wrong?
I have already.
.. select data network (#777).. click edit.. click next.. click next again..
under username: Yourphone#@vzw3g.com
pasword: vzw
without any sucess.
I am sure there is a simple setting I forgot about.
allenfdavis said:
what do you enable to get the revA speeds?
I am on the 3.2.3 rom and the .3 radio.
I just ran "mobilespeedtest" and ger 349 to 645.3 kps.
What am I doing wrong?
I have already.
.. select data network (#777).. click edit.. click next.. click next again..
under username: Yourphone#@vzw3g.com
pasword: vzw
without any sucess.
I am sure there is a simple setting I forgot about.
Click to expand...
Click to collapse
It is on by default with the latest Radio ROMs if it is available in your area. Anything above 256K/sec I believe is REV A speeds. I get any where from 150K to 1meg depending on the signal strength.
you people need to clarify Kbps/KBps/Mbps/MBps.
Big difference between bits and bytes...I've been getting 600kbps or 84KBps (plently fast for surfing) with crappy signal strength. I'll have to do some more testing with it.
machaf said:
you people need to clarify Kbps/KBps/Mbps/MBps.
Big difference between bits and bytes...I've been getting 600kbps or 84KBps (plently fast for surfing) with crappy signal strength. I'll have to do some more testing with it.
Click to expand...
Click to collapse
I use http://www.dslreports.com/mspeed so what ever units they are using is my units that I quoted above.
EDIT: with a 30% signal strength on EVDO I get 194 kbit/sec but have gotten upwards to 1 mbit/sec with full strength.
jambrose said:
It is on by default with the latest Radio ROMs if it is available in your area. Anything above 256K/sec I believe is REV A speeds. I get any where from 150K to 1meg depending on the signal strength.
Click to expand...
Click to collapse
That is not correct, as non RevA has speed bursts that is capable of getting up there.
I'm running the stock VZW rom and with full EVDO signal (non RevA) I've gotten speeds in excess of 600kbps
jambrose said:
I use http://www.dslreports.com/mspeed so what ever units they are using is my units that I quoted above.
Click to expand...
Click to collapse
Anyone else test on this site with both PIE and Opera?
PIE gives me a consistent sub 100kbits while opera gives me over 300kbits every time...
When tethered to my laptop.. 1000kbits +
its all about how efficient the browser you use is.
1xrtt, 1xEVDO, 1xEVDO-REV-A Lesson ,,,, again
Ok here it is,
I Do this for a living so here it is for real : 1xRTT shares voice resources, download speed max is 153.6kbps, up is 56k. 1xEVDO is an overlay with dedicated radio channels and up to 4 T1 spans connected directly to the front of the DOM (Data Only Module) with max theoretical download speed of 2.4mbps and max upload of 153.6kbps, this due to the reverse being similar to standard CDMA. REV-A is same sort of DOM but now called a DOM-A and has a max theoretical download speed of 3.5mbps and upload of 1.8mbps because the reverse link is true EVDO. If there is only 1 T1 on the DOM you will not exceed 1.54, actually 1.2 because of overhead bits, and remember also about EVDO that speeds drop more sharply with signal loss than 1xRTT does. There is no REV-A active indicator on the 6800, but it is now on by default, so if it is there you will have it.
Anyone got an upstream test I can run to test for RevA speeds? My download speeds have not changed since I upgraded.
madman34 said:
Ok here it is,
I Do this for a living so here it is for real : 1xRTT shares voice resources, download speed max is 153.6kbps, up is 56k. 1xEVDO is an overlay with dedicated radio channels and up to 4 T1 spans connected directly to the front of the DOM (Data Only Module) with max theoretical download speed of 2.4mbps and max upload of 153.6kbps, this due to the reverse being similar to standard CDMA. REV-A is same sort of DOM but now called a DOM-A and has a max theoretical download speed of 3.5mbps and upload of 1.8mbps because the reverse link is true EVDO. If there is only 1 T1 on the DOM you will not exceed 1.54, actually 1.2 because of overhead bits, and remember also about EVDO that speeds drop more sharply with signal loss than 1xRTT does. There is no REV-A active indicator on the 6800, but it is now on by default, so if it is there you will have it.
Click to expand...
Click to collapse
Thanks MadMan for the info. Very helpful indeed. I assume bits not bytes in the speed units?
Thanks MadMan for the info. Very helpful indeed. I assume bits not bytes in the speed units?
Click to expand...
Click to collapse
Yes, it's in bits not bytes
Ok, I just did a speed test using DCD's 3.2.5 ROM with radio 3.24.50 ROM.
===
http://www.speakeasy.net/speedtest/
Download Speed: 1861 kbps (232.6 KB/sec transfer rate)
Upload Speed: 588 kbps (73.5 KB/sec transfer rate)
===
SETUP:
I hooked up my phone via USB, went to Comm Manager, turned on internet sharing, clicked "Connect" on the screen. then I disabled all my other network adapters, and unplugged any internet cables. I disabled the WiFi and the Internal NIC, and unplugged the cat5 from the NIC. Also, I got my IP from 'whatismyip.org' and ran a WhoIS, and it was a Verizon IP. So this is the most clean/variable free test you can get. I had full bars too, but I do not know how far I am from the nerest tower. Just thought I would share that.
crobs808 said:
Ok, I just did a speed test using DCD's 3.2.5 ROM with radio 3.24.50 ROM.
===
http://www.speakeasy.net/speedtest/
Download Speed: 1861 kbps (232.6 KB/sec transfer rate)
Upload Speed: 588 kbps (73.5 KB/sec transfer rate)
===
SETUP:
I hooked up my phone via USB, went to Comm Manager, turned on internet sharing, clicked "Connect" on the screen. then I disabled all my other network adapters, and unplugged any internet cables. I disabled the WiFi and the Internal NIC, and unplugged the cat5 from the NIC. Also, I got my IP from 'whatismyip.org' and ran a WhoIS, and it was a Verizon IP. So this is the most clean/variable free test you can get. I had full bars too, but I do not know how far I am from the nerest tower. Just thought I would share that.
Click to expand...
Click to collapse
I would have liked to see you run the speed test on the device with at least PIE in the same location at about the same time to see the difference.
It certianly seems to me that while the phone can achieve fast speeds, the software and amount of free resources based on other applications running will have a major impact on the speeds you see. As I Posted earlier the speed in IE, Opera, and while tethered were dramatically different.. all performed within 5 minutes of each other in the same place.
Just because you dont see major speed on the speed tests does not mean Rev A isn't working.
I didn't have to do anything for my Rev. A to work. I am tethered to my laptop and get amazingly fast speeds with only 1 bar of signal strength. I am in Des Moines, IA and love my Sprint PCS!
Protonus said:
Anyone got an upstream test I can run to test for RevA speeds? My download speeds have not changed since I upgraded.
Click to expand...
Click to collapse
Anybody? A speedtest I can run in pIE that does upload speed testing?
dslreports.com/mspeed
and mobilespeedtest.com only test downstream...
x51 said:
I would have liked to see you run the speed test on the device with at least PIE in the same location at about the same time to see the difference.
Click to expand...
Click to collapse
im sorry, whats PIE?
x51 said:
Just because you dont see major speed on the speed tests does not mean Rev A isn't working.
Click to expand...
Click to collapse
i never said RevA wasnt working, i am not the thread starter, i just posted my speeds for the heck of it.
crobs808 said:
im sorry, whats PIE?
Click to expand...
Click to collapse
Delicious!
Sorry couldn't help it. pIE = pocket Internet Explorer. ie: the default browser.
I'm seeing the following from http://www.speakeasy.net/speedtest/ w/ the USB connection to my laptop.
Download Speed: 1201 kbps (150.1 KB/sec transfer rate)
Upload Speed: 453 kbps (56.6 KB/sec transfer rate)
dcd 3.2.5
3.42.30
im getting 1600 kb/s download speed with wmwifirouter and 1000 kb/s with pdanet. havent tried ICS.
I'm in fort worth tx and my speeds fluctuate from 50 to about 350kbs. The prl is 60613 and the rom is 3.56, radio is 3.42.02 and pri is 2.04-003. The last month or 2 the data speeds have been slow as molasses. That's tethering with pdnet and pie on the phone. Could somebody throw me a bone on this. Thanks.

[Q] Speed Test - Data Speed Test Results... Weird?...

Hi All,
I have the Speedtest.net app on my SGSII and have run some speed tests and am getting some results that I find weird.
Yesterday I tested my network speed from my home (small basement suite apartment if that matters) and the results were as follows...
Network HSPA Download -0kbps, Upload -0kbps, Ping -1ms at 8:12PM
Network HSPA Download 247kbps, Upload 15kbps, Ping 1172ms at 8:14PM
Network WiFi Download 11401kbps, Upload 505kbps, Ping 47ms at 8:26PM
Today
Network UMTS Download 2269kbps, Upload 664kbps, Ping 185ms at 10:07am
I know the WiFi ones will be different but can anyone tell me why my HSPA ones from yesterday are SO LOW and if my UMTS (3G) one from today is atleast in the normal range?
I am confused...
Thanks,
One test isn't enough. Maybe the network/cell tower was saturated or had a problem, preventing full speed in your HSPA test.
The 0/0/-1 are Speedtest's bug.
XpLoDWilD said:
One test isn't enough. Maybe the network/cell tower was saturated or had a problem, preventing full speed in your HSPA test.
The 0/0/-1 are Speedtest's bug.
Click to expand...
Click to collapse
Thank You for the info. Can you explain to me... Is UMTS 3G and HSPA is 3G+? Is that correct?
Today at work I ran a couple more tests and my UMTS Results were fluctuating as well... (I diddnt have any tests that came back HSPA today so far) Anywhere between 863kbps download to 1390kbps download and 301kbps upload to 748kbps upload... Are these weird as well? How can I get a true test of my 3G and HSPA speeds?
they are just slower speeds, the network seems to be under heavy capacity in your area. the only way to get a better idea is to test in the middle of the night, at 1 am, when the network is nearly empty and wide open.
RogerPodacter said:
they are just slower speeds, the network seems to be under heavy capacity in your area. the only way to get a better idea is to test in the middle of the night, at 1 am, when the network is nearly empty and wide open.
Click to expand...
Click to collapse
Thank You as well for your response. Can you tell me... IF my device was folr some reason running in 2G or "Edge" mode it would show that as the "Network Type" in the test like it says UMTS or HSPA? Is that correct?
Yes if your phone switches to edge you will see an E at the top of the screen and the setting menu will say edge. You were definitely on HSDPA though, just a slow network, cause edge is limited to 236 kbps. Your speeds were higher than that except for the one that goofed completely.

Speedtest in ace

I have the speedtest.net app on my phone but i'm getting very high ping ~100+ and download speeds of no more than ~2600kbps I have a 802.11G wifi and a 100mbit connection to the world, do we have such crappy wifi's on our phone?
My wife's LG P500 gets around ~8000kbps on the same router in the same spot
Could you guys who have access to a internet connection greater than 5mbit please try the speedtest.net app and report back to the thread test on wifi only plz
Just ran the app on my phone and PC. PC is running ethernet to the router; phone is obviously on wireless:
Phone is pinging 8ms more, which is expected.
What ROM are you running?
My speedtest app results on wifi ...
Sent from my GT-S5830 using XDA Premium App
I don't have an 5MBit internet connection, but if it makes you feel any better, I have a 30KBps connection.
Just flashed stock KPO
Did try a friends phone an SGS and he gets marginally better results...
Here are my results from a comp (with ehternet) and my phone
Flash a new ROM that's all i can say,
as you can already see people in here are getting such speeds of download/upload
There is nothing wrong with the Wifi adapter.. Flash another ROM as davinder mentioned.. If that doesn't work maybe somethings wrong with the Wifi adapter in your phone..
Just to let you know.
54Mbps is the theoretical max speed of 802.11g . file transfers are dependent on your system, and not just the transfer medium. For instance, if your HDD is being used simultaneously, your transfers are going to be affects by that. 3MB/sec is pretty decent for a wireless G connection IMO. other factors include electromagnetic interference; things like other wifi networks in the area, televisions, microwaves, and 2.4GHz wireless phones will interrupt 802.11 signals.
Ok, so I downgraded and still got the same results, but the comment about the HDD got me thinking about my SD card since it was the only thing on the phone not "stock" and I'm getting better results now wich is quite funny since the card I bought was a higher class Or so I thought atleast

[Q] What are normal ping, down and up speeds?

I just got around to downloading the speed test app to see how fast me x2 is and after the first test here is what I got:
Ping:19ms
Down:4989kbps
Up:703kbps
Now I dont know much but something tells me that up speed is a little low.
Im on cm7 with the Mash up script and wifi on.
Will the numbers be different if Im on 3G? Are these numbers even remotely good?
Many thanks to all!!
Apps aren't always accurate. I'm not sure what you meant will it be different if I'm on 3G? Wifi and 3G will always differ, wifi is much faster depending on your provider, where 3g can lag at times
On 3g I usually hit 3d and 1 up
Where wifi I'm like 25 down 8 up out there about.
SMILE It's Not Illegal Yet
Your ping time and up/down speeds can vary even when connected to the same tower or wifi network depending the congestion at any given time on the bandwidth provider's network, among other factors.
Your seemingly low upload speed could be attributed to other devices on the wifi network using the upload bandwidth allotted by the isp at the time you performed the speed test. It may also be the case the connection supplying the wifi network is 6Mbps down/1Mbps up. Your upload and download speeds while on wifi can only be as good as the connection from the isp regardless of the settings on your device or how many other devices are on the network.
For what it's worth, I have a Verizon 3G Network Extender plugged into my wireless router, meaning that both my WiFi and the Network Extender can only supply a connection that at best is only as fast as my cable modem's connection to Comcast. Eliminating all conflicting variables (e.g. no other devices on the network when running tests), my Droid X2's 3G upload and download speeds are consistently slower than when I'm on wifi.
19ms is a pretty good ping time, btw.
Lots of useful info. Thanks guys!
Sent from my MB870 using xda premium
I have also been curious and suspicious of my 3g data speeds. When I was stock and rooted with 2.3.4 I would get on average 20-30 kilobytes/sec in my house with a poorer signnal of -87dbm this is using speed test and checking the down up speeds with the mobile network app that puts the speeds up on the notification bar. I used that to monitor downloads and web browsing speeds which agreed well with speed test. In a good coverage area -67dbm I achieved pretty consistently 130-230 kilobytes/sec. I am now running eclipse 2.0.4 with CMDA build.prop edit to increase 3g speeds. I ve only noticed a doubling of speed when in -87dbma area nut otherwise I cannot achieve anyhigher than 300 kilobytes/sec. I wonder could my radio be weak or bad? I thought 3g speeds would but up to ~500 or greater in really good coverage areas.
MunkinDrunky said:
I have also been curious and suspicious of my 3g data speeds. When I was stock and rooted with 2.3.4 I would get on average 20-30 kilobytes/sec in my house with a poorer signnal of -87dbm this is using speed test and checking the down up speeds with the mobile network app that puts the speeds up on the notification bar. I used that to monitor downloads and web browsing speeds which agreed well with speed test. In a good coverage area -67dbm I achieved pretty consistently 130-230 kilobytes/sec. I am now running eclipse 2.0.4 with CMDA build.prop edit to increase 3g speeds. I ve only noticed a doubling of speed when in -87dbma area nut otherwise I cannot achieve anyhigher than 300 kilobytes/sec. I wonder could my radio be weak or bad? I thought 3g speeds would but up to ~500 or greater in really good coverage areas.
Click to expand...
Click to collapse
I never considered radio quality when I looked at my speeds. Exactly how one would go about checking ones radio quality is far beyond me. Its definitely something worth exploring (in my opinion)
Right I would also need to test other 3g speeds on a different phone on the same networko in the same area to rule out network end probs. Plus I got my DROID x2 used so that might be it there. Also if the radio heats up from persistent use that might reduce efficiency and lower speeds.
Those are fairly decent speeds. For a mobile device, that's about what I would expect. Your ping, 19ms, means that it takes .019 second to reach from your device to the Verizon servers, then to the servers of the sites you are accessing, and then finally back to your phone. Anything less than 80ms is considered good, so you have an excellent ping.
And to clarify, your upload speed will never be as high as your download speed. It's a throttling mechanism used by all (and I do mean all) internet providers of any kind to prevent things like hogging their bandwidth with torrents and the like. It's essentially an industry standard.

Categories

Resources