Related
Hi Friends,
First of all, let me tell you that this is NOT MY ROM. I've found it on the 4PDA forum so i am sharing it with you guys.
IMPORTANT INFO : THIS ROM IS FOR NEW P3400 and P3400i with S/N HT8xxx. I DONT KNOW IT WORKS ON OLDER P3400 OR NOT. NOR I HAVE EXTENSIVELY TESTED IT ON MANY DEVICES. I AM RUNNING IT ON A P3400i with ONBL 1.17.000 and SPL 1.07.Oref.
The Good:
1. This is a Windows Mobile 6.1 ROM with all default features of Windows Mobile 6.1 including the new welcome center etc along with a few HTC customizations.
2. You have about 43 MB of free User Memory after installing this ROM and about 19-20 MB of free RAM.
3. Device runs very fast when compared to the Stock WM 6 ROM.
4. Quiet fast boot up time.
5. The ROM doesn't have any customizations from the creator, ie. It has default boot screen, default About screen etc.
6. No EDGE related problems and No Control Panel icons missing. (This is a problem with lomlom's fusion 9.0 ROM)
The Bad :
1. I doesn't include HTC HOME, although this may not be quoted as a problem. HTC Home hogs quiet a lot of memory than the individual Messaging, Date, Calander and Task plugins.
2. Task manager incuded in the ROM is quiet old one.
3. As with most WM 6.1 ROMs, Windows Live is not working.
Download it from HERE if you have a 4PDA.com account (This is the original location of ROM where i found it: http://4pda.ru/forum/dl/post/132256/ruu_signed.rar
Else download it from here (I uploaded it on 4Shared for people who dont have a 4PDA account) : http://www.4shared.com/file/76614292/60fceda7/WM61_Stock.html
Sorry for not posting any screenshots but believe me, there is nothing special to post as screenshot. Its a very plain, WM 6.1 ROM.
In my opinion, if this ROM had got Windows Live Working, i can definetly quote it as the most wonderful and simplest Windows Mobile 6 ROM for P3400 and P3400i. But sadly enough, Windows live isn't working even after appying fixes and updates. So i guess i'll have to live with the browser version of hotmail.
For users who need MSN messenger functionality can try out Fring, search for it on google. Its a free, multi protocol messenger supporting Yahoo!, GTalk, MSN, AOL and others.
Also for task management features, I would recommend using HomeScreenPlusPlus plugin. Download it for free from this forum.
Enjoy!
UPDATE: I would also recommend reading Post #6 for knowing about my experiance about the ROM after customising it fully.
Thanks a lot for posting the same, here.
Just a couple of doubts, may be silly.
You have stated the following:
2. You have about 43 MB of free User Memory after installing this ROM and about 19-20 MB of free ROM
I guess, it is 19-20 MB free RAM, right?
Secondly, does this ROM contain Touch FLO, pre-installed?...
And finally, how is the file/directory browsing compared to lomlom's ROM?
krazy_about_technology said:
Hi Friends,
First of all, let me tell you that this is NOT MY ROM. I've found it on the 4PDA forum so i am sharing it with you guys.
IMPORTANT INFO : THIS ROM IS FOR NEW P3400 and P3400i with S/N HT8xxx. I DONT KNOW IT WORKS ON OLDER P3400 OR NOT. NOR I HAVE EXTENSIVELY TESTED IT ON MANY DEVICES. I AM RUNNING IT ON A P3400i with ONBL 1.17.000 and SPL 1.07.Oref.
The Good:
1. This is a Windows Mobile 6.1 ROM with all default features of Windows Mobile 6.1 including the new welcome center etc along with a few HTC customizations.
2. You have about 43 MB of free User Memory after installing this ROM and about 19-20 MB of free RAM.
3. Device runs very fast when compared to the Stock WM 6 ROM.
4. Quiet fast boot up time.
5. The ROM doesn't have any customizations from the creator, ie. It has default boot screen, default About screen etc.
6. No EDGE related problems and No Control Panel icons missing. (This is a problem with lomlom's fusion 9.0 ROM)
The Bad :
1. I doesn't include HTC HOME, although this may not be quoted as a problem. HTC Home hogs quiet a lot of memory than the individual Messaging, Date, Calander and Task plugins.
2. Task manager incuded in the ROM is quiet old one.
3. As with most WM 6.1 ROMs, Windows Live is not working.
Download it from HERE if you have a 4PDA.com account (This is the original location of ROM where i found it: http://4pda.ru/forum/dl/post/132256/ruu_signed.rar
Else download it from here (I uploaded it on 4Shared for people who dont have a 4PDA account) : http://www.4shared.com/file/76614292/60fceda7/WM61_Stock.html
Sorry for not posting any screenshots but believe me, there is nothing special to post as screenshot. Its a very plain, WM 6.1 ROM.
In my opinion, if this ROM had got Windows Live Working, i can definetly quote it as the most wonderful and simplest Windows Mobile 6 ROM for P3400 and P3400i. But sadly enough, Windows live isn't working even after appying fixes and updates. So i guess i'll have to live with the browser version of hotmail.
For users who need MSN messenger functionality can try out Fring, search for it on google. Its a free, multi protocol messenger supporting Yahoo!, GTalk, MSN, AOL and others.
Also for task management features, I would recommend using HomeScreenPlusPlus plugin. Download it for free from this forum.
Enjoy!
Click to expand...
Click to collapse
This ROM is only for new p3400 or P3400i,i have tried in Old p3400 and mine stuck in Boot mode,now flash the new GENE_WM6.1__1_17_720_02__B20764 by phamyang,it's better but i want an untouched WM6.1 ROM for old p3400 .If anyone have it please share.
dheerajk27 said:
Thanks a lot for posting the same, here.
Just a couple of doubts, may be silly.
You have stated the following:
2. You have about 43 MB of free User Memory after installing this ROM and about 19-20 MB of free ROM
I guess, it is 19-20 MB free RAM, right?
Secondly, does this ROM contain Touch FLO, pre-installed?...
And finally, how is the file/directory browsing compared to lomlom's ROM?
Click to expand...
Click to collapse
Yeh, the word is RAM. I've corrected that in my post.
File browsing os working perfectly. i have installed quiet many apps and still the windows folder is opening within 3-5 seconds.
No it does not have TouchFlo installed, it even doesn't have HTC home. Thats why there is so much free space. Its a very plain WM 6.1 ROM with all the features of WM 6.1 but very few customizations.
In fact, to tell you the truth, i dont miss Touch FLO coz it was a memory hogger. And now since it doesn't have HTC home built-in, i have installed HTCHome_1025_721_ALL.cab which is the 6 tab version of the HTC home. The 6th tab contains the music controller which can be used to play music using audio manager right from the HTC home screen.
The only problem this ROM has got is Windows Live! Thats it! I have searched a lot for a fix but haven't found any working one yet.
@ANKIT360 : Buddy as far as i have found out, the problem with Windows Live is connected to two things :
1. The original Windows Live that came in this ROM has some registry keys missing. For example, under HKLM\Services\Windows Live\Platform, the Transport key is missing.
2. There must be some problem with certificates etc that are causing Windows Live to not being able to communicate using SSL(Secure Socket Layer). WIndows Live uses SSL for communication purposes.
Maybe this information help somebody in finding a fix.
Thanks For sharing Man I am Going to try it tonight
Thanks a lot & keep Going
@swapnil_0081: My Pleasure man.
My Experiance with the ROM till now
UPDATE: Did about 25 different experiments with around 11 cabs, changing connections settings and installing different certificates. No avail, Windows Live and Messenger stuck at startup. Now i am not doing any more tries, even deleted the shortcuts to Live and Messenger from Start Menu.
Software i installed:
1. 6 Tab HTC Home plugin and HomeScreen Plus Plus for Today Plugins. HomeScreen Plus Plus also doubles as an always available task switcher and task manager. I needed this functionality very much as the HTC Taskmanager 2.0 is not included and task management is not possible from home screen without the HomeScreenPlusPlus plugin.
2. Mundu IM for muti protocol messaging, its paid but its great. It can connect to all the chat services and can do things that Fring cannot do, for example, adding new messenger friends.
3. WM5Storage for Mass Storage Mode
4. Resco File Explorer and GFinder+ for managing files.
5. TCPMP, YouTube, Nitrogen (Great Audio Player!), Flash Player 7, Flash Lite 2.1 and Real Player for Multimedia.
6. Opera 8.60 and Opera Mini 4.2 (Mini has great browsing speed with full website browsing, normal Opera is great for other stuff)
7. Yahoo Go! and Google Maps for maps and positioning.
7. iContact BERT Edition for finger scrolling Contacts, PCMImageViewer for Touch friendly Image Viewer and PCM Keyboard .14 for touch friendly keyboard.
8. Advance Config, FDCSoft TaskMgr 3.1, ClearTemp, PIMBackup, psShutXP, SoftKey (for changing functions of both softkeys on Today screen) and SKTools for system tweaking.
9. FDCSoft StartMenu for desktop Windows like cascading menu. Requires very less resources and normal start menu remains accessible as well. PointUI Home as an alternate shell.
10. Misc Software including FlashSMS (for sending SMS which show up directly on screen instead of going into inbox), CHMReader (for reading e-books in CHM format), Picsel Browser (A great E-book and document Reader), PocketRAR 3.8, SQL Server CE 3.5 with Query Analyzer (Databases can be created directly on device), VSPainter Lite (MS Painbrush like APP), Wordnet CE (Pocket Dictionary with a huge word database of 66 MB), Gerald Caller Location (It shows the network name and area name of person that is calling or being called, for India only) and OBEXinfo (changes the location to recieve files via bluetooth to SD Card.
Click to expand...
Click to collapse
With such a comprehensive list of software installed, i have about 28 MB User space free, and 16-18 MB of RAM free after 10 minutes of system startup with HTC Home, Homescreen plus plus, Tasks and Appointment plugins running. And with default caching, FileSystem performance is good, Windows folder opening within 5-7 seconds of taping
Isn't is amazing guys! This ROM is quiet good, much better than others.
So far only 3 problem i have identified :
1. Windows Live (The hotmail part, messenger part is solved with Mundu IM) not working.
2. In the Encryption option in System Tab of Settings, the checkbox remains always checked although files are not being encypted (In other words, using encryption is not possible, but people dont use it anyways, mostly).
3. An Old version of task manager with no Today screen task management support is given. This could be solved by using th task manager or HomeScreen plus plus which is better due to the fact that it can be accessed anytime to switch between applications
Click to expand...
Click to collapse
In short, i will recommend this ROM to everyone who wants to use WM 6.1 with faster device response. A little bit of tweaking, some software and a 2-4 GB of good quality memory card will make your gene as closely feature rich as other costly phones.
PHEW! Long Post! Sorry guys if you get bored from this post. But i wanted to share my experiance in detail with everyone.
krazy_about_technology said:
@swapnil_0081: My Pleasure man.
My Experiance with the ROM till now
....
PHEW! Long Post! Sorry guys if you get bored from this post. But i wanted to share my experiance in detail with everyone.
Click to expand...
Click to collapse
First of all, thanks a lot for taking time for hosting as well as testing and giving such a long feedback. Really appreciate... You have been simply superb in this forum.
But, I am still a bit reluctant to flash this ROM over Fusion, just because of that RAM avaialbility. In Fusion, I have around 23 to 24 MB RAM free, even after running TouchFlo, Wisbar advance etc., as well as after installing a huge amount of softwares (some of them in storage itself), I still have around 16 MB free in ROM. So, I am just perplexed, as why should I flash this one.
The only advantage, I can make out in this rom, is fast "windows" directory browsing as well as booting. But, I feel these are the items which we don't do each now and then. Even, I am pretty satisfied about the responsiveness of Fusion rom, such as switching applications etc. Moreover, responsiveness of TouchFlo has been simply great, and never felt it as a memory hogger, as its RAM consumption has been consistent and may be because of the 28 MB free RAM, provided by Fusion on start-up.
I have also attached a screenshort here, in which you can see that around 20.21 MB RAM is free, even when the ROM is running Touch Flo, Wisbar Advance, Hi-Calc, Resco Explorer, Excel (with a document loaded) and SPB screenshort applications. There may be even other applications such as SPB Keyboard in the background. Isn't it cool? Moreover, swiching applications have been instantaneous too. When I click on the icon of a running application on the Wisbar, the app is displayed immediately, within a second.
Again, I am not at all trying to downplay the efforts put by you to upload this ROM on a mirror and give us not only the access but also the feedbacks and support. Just wanted to put the points here. May be, you will come up with valid arguments and make me flash this one. Just because you must be knowing much more about these stuffs than me, who is almost a newb.
Best Regards...
Hi Dheeraj!
Buddy, if the lomlom's ROM is working for that much great for you, you have no reason to flash this. In my case, it was not. I got only 16-19 MB free without running any app whatsoever, in the case of lomlom's. Plus there were icons missing in Settings tab, and small inconsistensies here and there. Moreover since i tinker around with my phone a lot currently, accessing the \Windows folder is a routine task for me, and with lomlom's ROM i was having a lot of problem with that. Talking about Manilla 2D, ya it looks fancy but after a week of use, i found that its not that usable with me, personally. For me the charm of it was over.
And apart from all this, I always wanted a ROM that works like stock WM 6 ROM of HTC, in short, gives the "Original" look to my phone but still provides me with all the features of WM 6.1. I dont know why but i dont like it when the original OS is crippled in anyway. In this ROM, nothing is missing from the original WM 6.1 installation as described on the feature comparison page for Windows Mobile on Microsoft website.
So in short, its a matter of personal tastes. Our needs are a bit different and so are our ROMS I guess if you dont feel any problem with lomlom's then stick with it. Its a great ROM too and i and other members have solved almost all problems that happen with it after first time boot, so someone should use the result of those efforts too
When i came to this forum, i found that GENE users and specially those with NEW GENE were just crying around with SPL problems and nothing was there as a choice for them in terms of ROM availability. Thats why i decided to do whatever efforts i can to make things better for this part of the forum, ie. The GENE section. Now, i am not a social worker, but i feel for people whom problems i can sense becuase i also have them
Thanks for your complements
HTC Applications in this rom like home plugin,comm manager ,task manager , audio manager,album are very old versions
Can any one help me to update that one
or cook this rom with newer versions ????????
Home plugin? its not even there buddy! ya the ROM is a bit old, but works nicely.
Help !!!!!
hi guys ...i have a new gene (s/n ht8xxx) can any one tell me the steps to update my old wm5 to the new one step by step ...... please .....
Buddy, the way is completly described here:
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
Not to offend you or anything, please try to search before posting. Many of the custom ROM flashing problems with P3400 and P3400i have been already solved. Just a suggestion, Ok buddy.
And ya, although that tutorial references the lomlom's fusion ROM, you can use the ROM described in this thread too if you want to. The procedure is same, only use this ROM in place of fusion one.
thaaanx
thanx alot man ...u help me alot ....
Dear Krazy, Thanks for the Great ROM
Nice ROM. Thanks for ur Info Krazy. Using it on my P3400i HT8xxxx with SPL 1.07.oref.
Thanks Guys for your good words! Check out my new, self made WM 6.1 ROM which i will post tomorrow. Its a lot like this one with new version of software taken from Touch 3G and some goodies along with that. Currently, i am uploading it.
vishal
hey man i have downloaded wm6.1 rom as per given link but i m still not aware of its installation will u guide for that
is any body able to guide to install wm6.1 rom
vishalsanghani said:
is any body able to guide to install wm6.1 rom
Click to expand...
Click to collapse
^^ Did you happen to notice that there is a tutorial on the very first page about upgrading your Gene ?
why do they all want the ezyway
hi additcted & krazy
u guys are still very very nice guys i see u guys still wanting to help these @#$% are the words i wana say to these lazy guys it was different went i wanted to try no stiky no guide but now we have every thing
so all u new guys pls pls pls search read and then ask for help dont just expect help without u trying on ur own
Addicted2xda said:
^^ Did you happen to notice that there is a tutorial on the very first page about upgrading your Gene ?
Click to expand...
Click to collapse
This is Yota Contacts, an application lifted off the HTC Quartz (MAX 4G) which is WiMax device on russian operator, Yota's network.
It was initially in russian and a different resolution, but a team of great people (AllTheWay, CloudyFa, fhiesh, Yozi and last, but not least myself) helped traslate it English and 10 other lanaguages.
This first post is for the english version, for VGA devices only. CAB's for QVGA and WVGA devices, can be found three posts down.
Please read the information below before you install any of the cabs in this thread and PLEASE search before you post questions.
Benefits:
- Yota Contacts completely replaces the built in windows Contacts application.
- New dialer that's much faster then the built in dialer.
- Favorites groups
- Better onscreen keyboard\
- Much more, which I'm sure you'll find once you install it and play around...
Minuses:
- Will NOT read your SIM contacts. You would have to copy them to the phone memory if you want to use Yota Contacts.
- No easy VoiceMail access (holding down 1 doesn't work). The "New Voicemail" link on TF3D's homescreen also doesn't work.
- No "face down mute" feature.
- No "bluetooth on/off switch" while in a call.
- No "Slide to Answer".
- No "Company Directory" lookup if you're hooked up to a company Exchange server.
- This app doesn't display special characters in the contact names.
- S2U2's caller ID functions HAVE to be disabled if you have the Yota Dialer also installed. (S2U2 conflicts with the Yota Dialer)
- If you have a password lock on the phone, it will impede your ability to answer the phone quickly, because you will have to input the password before you can hit "Answer" on the screen.
- No video calling or "Videoshare" (yet)
Most of the minuses listed above can be avoided by simply installing the Yota Contacts application ONLY. You will find cabs for that at the end of this post.
Please keep in mind that none of the people involved in translating this application, actually developed it. This application came from the HTC Quartz, which is a WiMax phone operating on the Yota network in Russia. Therefore, any requests you might have, to add this or that, CAN NOT, and I can't stress this enough, CAN NOT, even be considered. The reason ? We don't have the source code for the applications included in this package. All we can do is make graphical skin changes or translations to other languages... to a point. Also, the keyboard can't be extracted either, it's an integral part of YotaContacts.exe.
One more thing to remember is this app takes up quite a bit of RAM (about 9 megs for the full version and about 4-5 for the Yota Contacts only version), which on a Diamond, Touch Pro, Touch HD, etc is not really an issue, since we have plenty of RAM. On a QVGA device, you should consider this before installing it, ESPECIALLY if you only have 64 Megs of RAM to start with.
The application takes a few seconds (at least) to start the first time you use it after you turn the phone on. It's recommended to keep it running in the background after first use, instead of closing it down. You can easily setup an "exception" in HTC's task manager for it.
The cabs don't modify any of the softkeys on the Today screen, but if you would like a link anyway, you can download a cab from the second post to do that.
Now, on to the good stuff.
-----------------------------------
The following three cabs contain the Yota Contacts and the Yota Dialer application. They both take over the Contacts and Dialer function of your operating system. You HAVE to reboot after install these cabs, even if the installation wizard doesn't prompt you to.
Base VGA version + Dialer >
MobileMatt Mirror
TF3D skin version + Dialer(shown in the last screenshot) >
MobileMatt Mirror
Skin1 skin version + Dialer(shown in the next to last two screenshots) >
MobileMatt Mirror
The following cabs contain ONLY the Yota Contacts application, the Yota Dialer has been left out. These cabs also work with CDMA devices (Alltel, Telus, Sprint, Verizon, etc...)
Base VGA: Download
TF3D VGA(shown in the last screenshot): Download
Skin1 version(shown in the next to last two screenshots): Download
This post reserved for extras for ANY version
If you would like to assign either the Left of the Right softkey on your TF3D Today screen to Yota Contacts, please download and install one of the cabs below (the names should be self explanatory).
The other cabs, change the language of the Yota Contacts application to the language code in the cab's name. So look for your country's language code and download the appropriate cab, install and reboot. This does NOT change the language of the dialer. There aren't that many translations available for the dialer, yet.
More translations available three posts down
This post reserved for cabs and screenshots of the QVGA version.
Base skin + Dialer QVGA version: Download
Base skin CONTACTS ONLY: Download
If your Today screen has a shortcut to "Phone" and you get an error trying to open "cprog.exe", edit that shortcut to point to "dprog.exe" and you should be fine.
This post reserved for the WVGA version.
Link to Yota Contacts: Download
Link the Yota Contacts + Dialer: Download
Great work,waiting for QVGA version to test on my Kaiser.
Thanks for sharing.
THANKs .
More translation changeover cabs available...
Sim Card Contacts
I would just like to get this clear with myself and maybe any other GSM members does this contacts app support Sim contacts?
No, it doesn't
After installed with QVGA version....
Nice looking
and bugs
I would try to fix that for you, but unfortunately I'm not the original author of the QVGA cabs and I can't test on my phone to try and fix the problem. If anybody wants to take a crack at it, you can edit USSDskin.zip in the cab to adjust it down to QVGA size
NRGZ28 said:
I would try to fix that for you, but unfortunately I'm not the original author of the QVGA cabs and I can't test on my phone to try and fix the problem. If anybody wants to take a crack at it, you can edit USSDskin.zip in the cab to adjust it down to QVGA size
Click to expand...
Click to collapse
yes,all right.I will try resize it.
I've had this installed on my Xperia for a while now and although I love it, I suspect it's extremely power hungry. My battery drains in under 1 day now as opposed to ~3 before I used yota.
Anyone else experience this?
Hey all,
first of all I would like to say that I really like this app.
I have one big issue.
After installing the app my connection with my Parrot CK3100 goes crazy.
When connect to my phone there is already a call been made???
My contacts aren't sync anymore.
I use a HTC Touch Pro.
What is wrong, or what do I wrong?
Who can help me, I would realy love to use this app.
I use HTC HD but nothing works, does not load the phone numbers in your address book.
I use the VGA version.
The log can not display even call calls
Works fine on my Touch HD. Your contact's probably don't show up because they're on your SIM card. This app can only read contacts that are in your phone memory.
Rozenthal said:
Works fine on my Touch HD. Your contact's probably don't show up because they're on your SIM card. This app can only read contacts that are in your phone memory.
Click to expand...
Click to collapse
I use only the contacts on your phone.
But the call log that also do not see
ussd skin for qvga
For fix the USSD services screen just put this zip file in Windows/skins folder.
Another request: Anyone know how fix the incoming call picture? It is in VGA size.
Thanks
ryomahino said:
For fix the USSD services screen just put this zip file in Windows/skins folder.
Another request: Anyone know how fix the incoming call picture? It is in VGA size.
Thanks
Click to expand...
Click to collapse
Thanks for that. Updated post #3 with the updated version
Golgo said:
I've had this installed on my Xperia for a while now and although I love it, I suspect it's extremely power hungry. My battery drains in under 1 day now as opposed to ~3 before I used yota.
Anyone else experience this?
Click to expand...
Click to collapse
A few people have reported this with the WVGA version, myself I don't have any problems running the VGA version. Try running the "contacts only" version. I'm sure your battery will be back to normal
Hi there,
Bluetoggler is a very simple application that allows you to toggle bluetooth (Off / On / 'Discoverable') on your WM6 device. When you run it, it switches your Bluetooth radio on or off or to 'discoverable', depending on the state it was in. There's a 5 sec. timeout to enable tristate switching. (Just see it for yourself, then you'll know what I mean)
Why:
I was getting tired of all the trouble one has to go through, just to enable or disable Bluetooth, so yesterday I wrote this application. I thought it might be nice to share it with other people who encounter the same problem, so here it is.
I really don't know if there already are other applications which do the same thing. If so, Bluetoggler might be a nice alternative. If not: have fun with it.
This application uses the .NET compact framework 3.5 and I tested it on my HTC Touch Pro. (Rom: 5.05.404.1 NLD, Original update from HTC). Of course I do not provide guarantees or can be held responsible for damage blablabla...
I think it's allways nice to hear what others think of something you've created, so please feel free to comment or send me an email at:
brrrbaybay (<_AT_>) gmail (_._) com.
Friendly regards,
Joost Haverkort (BrrrBayBay)
WM6.5 compatible??
WM 6.5?
Haven't tried that. It's compiled for the .NET compact framework 3.5, and I assume that WM6.5 will provide backward compatibility with WM6 or 6.1.
It runs fine on my original HTC ROM with WM6.1.
--
Joost
Check It: http://thewingster.com/bluetoggler.aspx
Ur app has been added to The Wingster! Feel free to post that link anywhere you'd like!
Nice App!
This is nice!
I love this!!
Thank you Joost!
Since you wrote the app.. is there a chance that you can add some options..
· When the phone button is press or the exe is active, enable bluetoooth
· When you hang up the phone disable bluetooth
· When you hang up the phone do nothing to the bluetooth
· When a call comes in enable bluetooth
Thank you for your contribution to the forum.. I am currently using AEButton to triple clock a button to turn it on and off cause there was nothing that did it automatically.
Extra functions
@Eazy:
I really like you ideas, though I'm not sure if I'll implement them due to lack of spare time :s
I'm considering buying the HTC Touch Pro 2. If that device also has crappy bluetooth toggling, I'll certainly update BlueToggler.
Bluetoggler source dump
Hi all,
I decided that if I'm not continuing to work on this application I might as well give away the source code. It's not much (understatement), but here it is. Have fun with it.
Friendly regards,
Joost Haverkort
Ps.
This application needs the "Embedded source tools for bluetooth" package from microsoft to compile.
delete "On-Discovery" mode?
Can anyone make another version with the "On-Discoverable" option out of it? That is, just have it as "On" and "Off"? I have a Sprint/HTC Touch Pro, and I love this program, but I don't want to turn on the discovery mode. I just want on/off.
Compatibility with WM 6.5
The purpose of BlueToggler interrest me because i want to implement a bluetooth application on WM 6.5.
However, when I run it, it doesn't switch my Bluetooth radio because it can't check the state it was in.
I tested your application on my HTC HD mini T5555. (Rom: 1.07.401.1 (85429) WWE, Windows Mobile 6.5 Professional).
No compile error, the program just doesn't apply.
Perhaps, Microsoft.WindowsMobile.SharedSource.Bluetooth.dll doesn't work on WM 6.5.
If someone knows why it doesn't run correctly, it'll be great to answer me as he can.
hi all,
====================================================================================
a new version is now available for android - go to google play
====================================================================================
after a long time where i had so many tips and software solutions from this community it is about time a put something back to it.
i have been looking for an application to allow me record a voice memo and send it to myself as a reminder with a voice clip attached.
found a commercial program that did not do it as i wanted so had decided to do it myself.
MemoMe is a light application that enables you to record your memo when you just got an idea or remembered something you do not want to forget, like when you drive or just do your shopping... it goes to your mail or your secretary mail etc. easy to use and configure. it supports all WM devices and all screens.
MemoMe uses any one of your existing email account so no data is passed on and your personal info is untouched, this is mainly for security reasons so no
one can use your smtp info or expose your user is & password.
as said it is offered as a freeware to all as a tribute to this wonderful comunity.
as per donations etc - is you feel like donating, please think of someone who really needs it like poor children etc or donate to charity.
a nice thank you is much more than i need.
http://download.arkom.co.il/freeware/MemoMe_Freeware.CAB
have fun...
OK, the first official release is now available for download.
change log from the pre - release:
- UI was completely changed.
- many internal engine changes
- sound effects were added
- the send engine was totaly changed and due to security reasons there is no direct SMTP support at all. the only mechanism supported is sending the Memo using the internal outlook engine. any existing account can be used and the configurator shows all available options. in the older version there was a need to provide your SMTP server, username and password - not very good for security...
this way no sensitive data is stored to be a potential risk.
if i will find a way to use a public service or any other option were no info will be stored i will consider.
setup & update procedure:
just download one of the setup packages either EXE or CAB and install it
if you have installed any older version i recommend you uninstall it and delete the folder to make sure nothing is left behind
run the config utility and just follow the few selections and save.
very easy to use and nothing to write a manual for
now you can use the MemoMe app and enjoy !
for any questions or requests or ... just let me know
may you all have a great weekend
=============== 16/09/2009 ================ Version update ==========================
there is an update available for download at the same links above
ChangeLog:
- AutoPilot: it is now possible to set the app to load in auto pilot mode where it does not show all 4 buttons etc. the app loads directly in recording mode where there is one big stop recording button on screen. tapping the stop recording button will automatically send the memo and exit.
naturaly the standard mode is also available - look at the configurator screen...
- SoundCompress: there is an option to dramatically compress the memo file sise (for internet air time saving) a typical 300 KB file will be ~20KB (!!), of course voice quality will be a slightly lower... but realy not too much
- Splash screen time is neerly nothing now on the AutoPilot mode...
- Configurator is automatically loaded if first run or no INI. no need to exit and run configurator...
- internal engine modifications...
- no change in pricing model - this is still the same - free
in spite of huge interest from mobile operators to use it as an embedded application to increase data the application will stay freeware.
will be glad to have your comments (and wish lists)
===================================== 19/12/2009 ================================
a new version is now available for download - 1.5.0
- a major UI change was done and major internal engine
- the audio quality is well kept but can now bw compressed
- you can now select a differentrecording time by just entering your rec time value in seconds
- any device - any OS version - any screen resolution
this is the last and final freeware version as the application will now go to its commercial phase with many more features.
for most of us this basic version is exactly what we need...
=======================Version update to 1.5.1 =============== January 20 2010 ======================
a new version is available from the link above
- time recording bug - fixed
- compression bug fixed
- added indicators for compression mode and time recording / time left
====================== version update to 1.6.0 ================== Jan 23 2010 =======================
new version, answering to most requests
change log:
1. audio engine completly renewed - now normal audio will go as WAV and compressed as OGG
2. in AutoPilot you can pause and resume as much as you like. don't forget to set the option in config...
3. the app can now hide for faster reload - set in config...
4. you can set the subject - allow in config...
5. minor internal fixes
note: if you use soundFX you will get a beep in audio file every time you pause so you can know where you paused
if it is not wanted stop soundfx in config
enjoy...
enjoy !
Help me with Setup
Hi, I am having problems sending to my mailbox I am not sure of the smtp address, could you help with the setup if its not too much trouble, I am using windows live mail........................Thanks for the neat apps
currently the application supports 2 options of sending your Memo:
1 - using your SMTP information where you will have to enter your SMTP server, User & Password and to mark the Authentication if your server requires (most do).
2 - using your AS pocket outlook. if your device is configured to sync your email using pocket outlook (means your outlook can send / receive email) and the default account name is ActiveSync, that option will send the meno using this account. so when you next manually Send/Recv or it performs an automatic Send/Recv according the time intervals you specified.
the nextversion will ofer a different mechanism - either you use your outlook and by this BTW you dont even have to know or provide your SMTP info or the application will directly send using a special set SMTP account I will provide it internally.
i hope by this weekend i will have sometime so i will update the application, in the download server there is a "fresh" version - with fresh user interface that is the final UI from now i will update the functionality only -
- it will allow taking a photo, add a memo to it and send
- it will allow sending to third party as well
and the "wish list" is getting longer and longer as other guys are also sending feedbacks with ideas...
one thing will remain - as much it will be further developped i will keep it free, that's my obligation to this great community that provided me with so many free applications so far
Thanks for the information I will wait for you updated version, btw great work and thanks
you can now go back to the first post - i've updated the post (and app)
Thanks for the update..I didn't notice any changes in the UI, I got the same UI as the previous ver... there were some changes in the configuration.. didn't see any option to take a photo either maybe I downloaded the wrong file?????
oh, i see.
you probably downloaded the temporary version.
the previous version had a simple blue backgroung and the white one with rounded buttons was just added, but that is not your problem
the version available now is the latest one (last night) and is final (before the next one )
as i said the next version will have the camera option and more, it was important to get to a final look and functionality before going to futuristic features.
trus me that the next version will not take years ( it is under design right now but i have my real day job to attend first, this is only a hobby)
keep on and buzz me if you need anything
Thanks a lot, this ver works for me just finishing testing
good, i'm happy.
enjoy it and please send feedbacks on your experience
comeback to see if there is a newer version
send your friends too...
BTW - what device you use ?
very impressed....
tested ..MemoMe ..on my blackstone with standard rom ,working very ..very smooth for me ..!
for me, it is very handy, for reasons, you also set out and more ( if you just want to be a bit lazy, in typing short email ,this is it ! )
thank you
thanks Willcor, really pleased to hear that.
it did not come out of being lazy it came out of a real need - say you are driving or just walking, you just remembered something or were told something you do not want to forget... i operate it over a voice command so when i drive i just call the app by its name - record and send...
next will come as said a photo attachment so you will be able to take a pic add comment and send.
next will come third party reciever...
and i hope to add a voice recognition to so you can dictate...
have fun
ZeevG said:
good, i'm happy.
enjoy it and please send feedbacks on your experience
comeback to see if there is a newer version
send your friends too...
BTW - what device you use ?
Click to expand...
Click to collapse
I am using a Blackstone
Mr.Naresh
Dear ZeevG,
NoteMe Working nice.
One query , if i record the note and exit without sending, will the note save anywere or it deleted automaticly ? and if not deleted can i listen and send it in next time login.
Please reply.
Regds
Naresh ( India )
ZeevG said:
hi all,
after a long time where i had so many tips and software solutions from this community it is about time a put something back to it.
i have been looking for an application to allow me record a voice memo and send it to myself as a reminder with a voice clip attached.
found a commercial program that did not do it as i wanted so had decided to do it myself.
MemoMe is a light application that enables you to record your memo when you just got an idea or remembered something you do not want to forget, like when you drive or just do your shopping... it goes to your mail or your secretary mail etc. easy to use and configure. it supports all WM devices and all screens.
you can use your SMTP direct sens or use your mobile outlook to send it for you (mainly for security reasons nor to expose smtp user and password if you are concerned). as said it is offered as a freeware to all as a tribute to this wonderful comunity.
as per donations etc - is you feel like donating, please think of someone who really needs it like poor children etc or donate to charity.
a nice thank you is much more than i need.
there is a CAB download link and EXE link for those who prefare.
http://cc4biz.com/Downloads/MemoMe_Setup.exe
http://cc4biz.com/Downloads/MemoMe.CAB
have fun...
OK, the first official release is now available for download.
change log from the pre - release:
- UI was completely changed.
- many internal engine changes
- sound effects were added
- the send engine was totaly changed and due to security reasons there is no direct SMTP support at all. the only mechanism supported is sending the Memo using the internal outlook engine. any existing account can be used and the configurator shows all available options. in the older version there was a need to provide your SMTP server, username and password - not very good for security...
this way no sensitive data is stored to be a potential risk.
if i will find a way to use a public service or any other option were no info will be stored i will consider.
setup & update procedure:
just download one of the setup packages either EXE or CAB and install it
if you have installed any older version i recommend you uninstall it and delete the folder to make sure nothing is left behind
run the config utility and just follow the few selections and save.
very easy to use and nothing to write a manual for
now you can use the MemoMe app and enjoy !
for any questions or requests or ... just let me know
may you all have a great weekend
Click to expand...
Click to collapse
of course - if you record and not send or the sending failed the memo is still stored in memory - usually the file is in the program folder so easy to find.
next time you run the app you can listen to the record and send
if you try to record when there is an unsent memo you will get a worning and then can choose to overwrite or go back...
Using it on my touch diamond2, it works like a charm, thanks!
just two simple questions:
1) does it sync with outlook?
2) can the voice memos be attached as tasks?
thanks a lot for your fine work!
two simple answers:
1) if you meant pocket outlook - the answer is yes - it uses outlook to post your email to yourself. if you meant pc outlook - no need to as your pocket outlook should sync to your desktop. MemoMe then sync to pocket
2)no. the voice memo goes as an attached file via email to your inbox, that's what it says in first place.
Nice software.
But
When Sound Effects are off it still plays some sound when it starts, buttons pressed etc.
If you wait until max recording time in pilot mode it hangs. It draws blue line till screen end. You press hand button. Button become a clock. It again draws blue line till screen and hangs.
oops, i will check it out ASAP
anyways there's a new version in the oven just about to be ready
thanks any how for your comment
That is great - I'll wait for new version
Could you implement pause button? So one could start recording, press pause and then continue recording to the same file?
Hi all, I decide to make this small tutorial because it is really difficult to make a rom if you don't have that device
so this is the way I make my rom's, I know there are a lot of other ways to make a rom but this is the way I cook.
And I want to ask all other cookers to help me with this, because I simply don't know everything about cooking, I'm still learning.
PART 1
First of all the kitchen.
The kitchen I use is the one from airextreme which can be found HERE thanks to airextreme
After downloading the kitchen, just install the kitchen by example c:\kitchen
Now we have to add the stock rom in the kitchen, the great thing about this kitchen is that you don't have to
extract the exe file from the original rom, the kitchen will do that for you.
If you have a NEON400 download your rom HERE
All other shipped rom's can be found in conflippers thread HERE thanks to conflipper
To add the stockrom just run oskitchen.exe as an administrator and the kitchen is asking you for the device,
if your device is not in the list just type a name for your device.
Search for RUU_signed.nbh if you extracted the exe file or just search for your original exe file
by example (WWE_2.16.831.3_Radio_NikeMR_1-65.29.22_signed_Ship.exe) if you didn't extract the exe file.
And let the kitchen do his job, after the kitchen is finished, you just made your own kitchen.
And if you all can see the kitchen exactly know which files you must recmoded so you don't have to do that.
PART 2
Where can I found the latest wm 6.5 builds and how to add them into my kitchen.
There are a lot of site's where you can found the latest wm 6.5 builds, I just have to ask the owners if I have permission to add
the link here (If you send me a pm, I can send you the links). But I don't think it is a problem if I upload the latest build.
How to add a new wm 6.5 build, just click on Import and choose Import a windows mobile build.
As you can see there are 3 options to add a new build.
Just search for the new build and click on it and then start importing.
Now you've added the latest wm 6.5 build into your kitchen.
In post 3 I placed the tested builds, you don't have to import that one I already made it ready for the kitchen.
Click to expand...
Click to collapse
That's it for now, more to come later....so keep an eye on this thread.
HTC Packages and what do they do (Thanks to cnzqy1 from www.mobileunderground.info)
Abbreviations of device names:
A - All devices, L - Leo, S2 - Topaz S2 and Rhodium S2, Q - Qilin(TI OMAP Chipset, GSM and TD-SCDMA dual mode), TC - Tachi(GSM and CDMA2000 dual mode), R - Rhodium, T - Topaz, G - devices with GSM network support, C - devices with CDMA2000 network support, O - Old devices(Diamond, Raphael and Blackstone).
Packages:
A4 IME(Q, TC): Chinese Pinyin IME, Chinese only.
Abobe PDF(A): PDF viewer.
AdvancedNetwork(L, S2, Q): Sets network for operators, GSM only.
Album(A): HTC replacement of original Pictures and Videos. Including picture viewing and video playback function, dependency of Manila and Camera(maybe).
aGPSConfirmation(L, S2): Ask for confirmation when uses A-GPS, GSM only.
App Service(A): Application Service. May be a dependency of other HTC applications.
Appoinment Editor(L, S2, Q): HTC replacement of original appointment editor, dependency of Manila 2.5 and 2.6.
Arcsoft MMS(O): MMS application.
Arphic CHS Font(A): Font for Simplified Chinese, Chinese only.
Audio Booster(A): Visual Equalizer.
Audio Manager(O): Audio manager with GUI, dependency of Manila 1.x.
Audio Manager Engine(A except O): Audio manager without GUI, dependency of Manila 2.x.
AutoRun(O): First boot customization.
BluetoothSetting(A): Extension of the original Bluetooth Setting.
Boot Launcher(A): Launch applications or services when boot.
Browser Snapshot(L, S2, Q): Support bookmarks thumbnails in Manila 2.5 and 2.6.
BTBPP(O): Provides print messages by Bluetooth printer function.
BTFTP(O): Makes your device a Bluetooth FTP server, also named as Bluetooth Explorer.
Caculator(L, S2, Q, TC): HTC replacement of original calculator.
Camera(A): HTC camera application, device dependent.
CheckAutoRun(O): Dependency of AutoRun.
CHS FontSetting(A): Switches between the Simplified Chinese fonts, Chinese only.
ClearStorage(A): Hard reset the device.
CM Guardian Service(TC): Prevent the connection settings from lost on Tachi. Not useful.
CMBandSwitching(L, S2, Q): Switches between bands, GSM only.
CMBluetooth(Q): Bluetooth earpieces setting-up wizard.
CMCallBarring(L, S2, Q): ?
CMInternetSharing(L, S2): Make your device a Wi-Fi access point.
CommManager(A): HTC replacement of the original Comm Manager. Wireless controls, dependency of several CM applications and WiFiWizard.
ConnectionSetup(L, S2, Q): Sets up connection for the phone, GSM only.
Concurrence Mgr(A): Deals with applications behaviours when two applications running together according to registry keys.
Contact Picker(L, S2, Q): HTC style contact picker, dependency of new Message Enhancement and HTCMessaging Client, newest versions are not suitable for VGA devices.
Contact Utility Engine(A): Deals with contacts, dependency of Manila and Phone Canvas Enhancement.
CyberonVoiceSpeedDial(Q, TC): Voice dialing application, Chinese only.
DataDisconnect(A): Disconnects data connections, dependency of CommManager.
DelWMPTempFolder(L, S2, Q): Deletes the Temp folder of Windows Media Player.
DeviceInfo(A): HTC replacement of th original Device Info.
DigitalCompass(L): Hardware compass, device dependent.
DMRouter(C): Diagnostic tool for CDMA2000 devices, CDMA2000 only.
Dopod Base(Q): Controls and graphics for Dopod applications, dependency of some Dopod applictions, Chinese only.
DopodCTApp(TC): Applications specially for China Telecom, Chinese only, not useful if not on China Telecom network.
DRM Middleware(A): Related to DRM functions, dependency of Audio Manager and Audio Manager Engine.
Dshow(A): Multimedia components, dependency of Album and Camera, device dependent.
Email Setup Wizard(A except O): HTC replacement of original Email Setup Wizard, dependency of Manila 2.x.
EPST(C): CDMA2000 NV items editor, CDMA2000 only.
ExtNewPhoneSetting(L, S2, Q): HTC replacement of the original Extended Phone Setting, GSM only.
Facebook Engine(L, S2, R, T): Facebook integration for Manila 2.x, dependency of Manila 2.x.
FlashLiteShareDll(L, S2, Q): Dlls for Flash Lite, may be a dependency of Manila 2.5 and 2.6.
Field T e s t(G except Q): Diagnostic tool of network status of GSM devices, GSM only.
FieldTrial(C): Diagnostic tool of network status of CDMA2000 devices, CDMA2000 only.
FM Radio(Almost A): FM radio application, device dependent.
Fuart(C): Enable/Disable Full Speed USB Mode, CDMA2000 only.
Full Screen Player(A): Plays videos in Album, dependency of Album.
GMM(L, S2): Google Maps.
GMM Customized(L): Fake Google Maps(?), Chinese only.
GoogleLocationService(A except O): Google Location service, dependency of My Location service.
Group Editor(L, S2, Q): HTC replacement of original Contact Group Editor, dependency of Manila 2.5 and 2.6.
G Sensor Calibrator(A): Calibrates G-Sensor.
HTCAnimation(A): Boot and shutdown animation and sound.
HTCAPM(O): HTC Advanced Power Management.
HTCApplication(A): Dependency of some HTC applications.
HTCBirthday(L, S2, Q): Birthday notification manager.
HTCBookmark(L, S2, Q): HTC bookmark manager, can replace the Opera one, dependency of Manila 2.5 an 2.6.
HTCFDN(L, S2, Q): HTC fixed dialing network, GSM only.
HTCFont Link(A): Manila fonts support.
HTCFramework(A except O): Dependency of some HTC applications.
HTCGeoService(A except O): Dependency of My Location service.
HTCGesture(O): ?
HTCMessage(A): ?
HTCScroll(A except O): Provide scrolling function for HTC applications, dependency of some HTC applications.
HTCSettings(A): ?
HTCStartUp(A): ?
HTCUtil(A): Related to several system functions, dependency of some HTC applications.
IE6Enhancement(L, S2, Q): ?
InCallRecorder(Q): Record phone calls.
IME CHS(L, Q): Touch Input Simplified Chinese variant, Chinese only.
IPDial(Q, TC): Auto prepend IP dial prefix, Tachi variation has dual-mode support and may be Tachi only, Chinese only.
JBlend(A): Java Virtual Machine.
Jbed(R): Java Virtual Machine.
LockScreenAppLauncher(A except O): HTC replacement of original Windows Mobile lock screen.
Long Press End Key(A): Prompt you long pressed end key, newest versions are device dependent.
MaLanHua(TC): Chinese handwriting IME, Chinese only.
Manila(TC, R, T, O): Manila 1.x or 2.0 or 2.1.
Manila Calendar(L, S2, Q): Calendar tab for Manila 2.5 or 2.6.
Manila Core(L, S2, Q): Core components of Manila 2.5 or 2.6.
Manila Footprint(L): Footprint tab for Manila 2.5.
Manila Home(L, S2, Q): Home tab of Manila 2.5 or 2.6.
Manila Internet(L, S2, Q): Internet tab for Manila 2.5 or 2.6.
Manila Mail(L, S2, Q): Mail tab for Manila 2.5 or 2.6.
Manila Message(L, S2, Q): Message tab for Manila 2.5 or 2.6.
Manila Music(L, S2): Music tab for Manila 2.5.
Manila People(L, S2, Q): People tab for Manila 2.5 or 2.6.
Manila Photo(L, S2, Q): Photo tab for Manila 2.5 or 2.6.
Manila Program(Q): Program tab for Manila 2.6.
Manila Settings(L, S2, Q): Settings tab for Manila 2.5 or 2.6.
Manila Stock(L, S2): Stock tab for Manila 2.5.
Manila Twitter(L, S2): Twitter tab for Manila 2.5.
Manila Weather(L, S2, Q): Weather tab for Manila 2.5 or 2.6.
Media Tool kit(A except O): Dependency of Album, must match Album version.
Menu Enhancement(A except O): Provides a finger-friendly menu.
Message Enhancement(A except O): Provides numbers and links interactions in messages and a compose page, dependency of Manila and Phone Canvas Enhancement, must match Manila and Phone Canvas Enhancement version.
mHub(O): Codec pack, dependency of Album and Camera.
mHub Emz(TC): Codec pack, dependency of Album and Camera.
mHub VO(L, S2, Q): Codec pack, dependency of Album and Camera.
MicrophoneAGC(A): Microphone auto gain control.
MP3 Trimmer(A): Trims MP3 files on your device.
Mute(A): Provides some mute features.
MyCPL(A): Make shortcuts in Settings, just like the .cpl files, dependency of many packages.
New Contact Card(A except O): Create and edit contacts, dependency of Manila and Message Enhancement, must match Contact Utility Engine version.
NewMailAccount(A): ?
Notification Enhancement(A except O): Enhances notification manager.
OmniBizCard(Q, TC): Chinese business cards scanner, Chinese only.
Opera Browser(A): Internet browser.
PhoneAlarm(Q, TC): Qilin variation: Extended events notifier, repeatedly notifys when there are unread SMS, missed calls, etc. Tachi variation: Notifys you when you have a call for every 1, 5, 10, 20 or 30 minutes.
Phone Canvas Enhancement(A): HTC style phone canvas.
PhoneCanvas(C): CDMA2000 dialer parser, support entering EPST, etc. by inputting phone codes, CDMA2000 only.
PhoneExt Service(C): Extended services for CDMA2000 devices, CDMA2000 only.
Picture Enhancement(A except O): ?
PKG(A): Installs .pkg files.
Power(A): HTC replacement of original power settings.
Power Service(A except L): Power service of devices.
PowerOffWarning(A): The prompt when you long press power key.
PowerWord(Q, TC): English-Chinese and Chinese-English dictionaries, Chinese only.
Quick GPS(A): Download satellite maps to speed up GPS positioning.
Resource Proxy(A except O): Preload graphical resources and be the proxy of resources for HTC applications, dependency of some HTC applications.
Ringtone Plugin(A except O): Set ringtones by long press on audio files in file explorer.
SCP(Q, TC): Personal security center, provides calls firewall, messages firewall, remote control by messages and notifiy if SIM card changed functions. Device dependent, Chinese only.
Search Call Log(Q): Provides searching call logs function in built-in search application.
SendContactViaSMS(O): Provides sending contacts via SMS function, Chinese only.
Sensor SDK(A): Fundamental service for all sensors, device dependent.
Settings Improvement(L, S2, Q): Dependency of Manila 2.5 and 2.6 and some HTC applications.
SharedDll(O): Dlls used by HTC applications, dependency of some applications
Shared Modules(A except O): Modules used by HTC applications, including vibration service, dependency of some applications.
SharedResource(L, S2, Q): Graphics and some files for HTCFramework, must match HTCFramework version.
SignatureReplace(A except O): ?
SlidingSound(R): Play sound when you slide out/in the keyboard.
SmartTouch(O): Support of the touch panel of Old devices, device dependent.
SMS Pack(Q, TC): Provides several SMS related funtions(backup, search, auto replay, group send), Chinese only.
SMSInboxThreading(L): Switches between threaded mode and unthreaded mode.
StartIconLoader(L, S2, Q): Dependency of Manila 2.5 and 2.6, must match Manila Core version.
Storage Low(A): Notify you when your storage is low.
Streaming Media(A): Streaming media player.
Streaming SDK(A except O): Streaming media component.
TaskManager(Q, TC, O): HTC task manager with a quick menu in Today.
TaskBarIconMgr(A except O): Taskbar icons service with icons pack(Bluetooth headset icon, earphone icon, etc.).
Teeter(A): HTC G-Sensor game.
TimeZoneAutoFix(A except O): Auto fixes time zone when connected to Internet.
TVOutPopUp(R): Provides TV-Out feature, device dependent.
USB To PC Pop Up(A): Switches USB connection between ActiveSync mode, Mass Storage mode and Internet Sharing mode.
VBookmarkMgr(L, S2, Q): Manages visual bookmarks, dependency of Manila 2.5 and 2.6.
Voice Recorder(A): HTC replacement of original Recorder.
VoiceOut(O): Reads out incoming SMS, time, etc., Chinese only.
Volume Control(A): HTC style volume control, newest versions are devices dependent.
WiFiWizard(A except O): Wizard for Wi-Fi connection.
WiFiSettings(A): Basic settings for Wi-Fi.
WLANSettings(A): Advanced settings for Wi-Fi.
zlibce_m(A except O): ?
Click to expand...
Click to collapse
To make it easier for all off you, I will place the tested builds here, the only thing you have to do is extract the file and place it into your kitchen/sources/windows mobile builds folder and you're done.
23673 com3 Contains some bugs.
23128 com3 Already replaced cprog.exe, pimstore.dll, tpcutil.dll, lockscreen.dll taken from 23563, take care small sms bug.
21914 com2 No bugs, added office mobile 2010
23130 com3 Already replaced cprog.exe, pimstore.dll, tpcutil.dll, lockscreen.dll taken from 23563
Thanks for posting this tutorial!
Looking forward for the next parts!
Regards
GLa'DOS said:
Thanks for posting this tutorial!
Looking forward for the next parts!
Regards
Click to expand...
Click to collapse
Thx buddy, I add some more info later today.
Greetz,
I have a problem with the building, after I insterted a build and made a rom, there is still the cube and the default designs, settings and programs of the stock rom.
I added some programs and themes in the kitchen but they are not in the new rom
Hope you can help me
GLa'DOS said:
I have a problem with the building, after I insterted a build and made a rom, there is still the cube and the default designs, settings and programs of the stock rom.
I added some programs and themes in the kitchen but they are not in the new rom
Hope you can help me
Click to expand...
Click to collapse
Sure I can help it had to be my next part but don't have much time at the moment,so go to your oem-packages and uncheck everything except OEMDrivers and OEM_Lang_0409, then open your OEM_Lang_0409 and delete everything except the files ended with : *.htm, *.mui, *.pwi, *.provxml, mxip_initdb.vol and initflashes.dat.
Hope this will help
Regards,
Rataplan said:
Hope this will help
Regards,
Click to expand...
Click to collapse
It worked!!^^
One more question
I have a problem with the built (21907) you posted:
After I imported it into the kitchen it says:
"No locales are available. Make sure the OEM_Lang_LCID folders and their matching
WM LCID ones are present.
If i try to make a rom with the languagefolder from the stock-rom it gives an error that there happend an error when building the language
Ok, I will check the build and see if there is something missing, I thought I used it for cooking a NEON400 rom but didn't get any feedback so I will check this and keep you informed.
Greetz,
Hi rataplan. i look at WM 6.5 button style at bottom bar.
The normal build SYS for kitchen always result button with circle style for any button or option on the bottom bar. i look at your custom ROM and found that the circle style is change into the rectangle style for any button on the bottom bar. can u tell how to change that ? - sorry newbie.
Thanks for posting this tutorial! I will try soon!
lion_snake1 said:
Hi rataplan. i look at WM 6.5 button style at bottom bar.
The normal build SYS for kitchen always result button with circle style for any button or option on the bottom bar. i look at your custom ROM and found that the circle style is change into the rectangle style for any button on the bottom bar. can u tell how to change that ? - sorry newbie.
Click to expand...
Click to collapse
If I understand you, I didn't change that but that is just another build which uses the old style, I used liven's themes to customize it a little bit, you can find livven's theme's HERE.
Greetz,
pajerm said:
Thanks for posting this tutorial! I will try soon!
Click to expand...
Click to collapse
You're welcome, just watch this thread I will post more information
certainly!
Thanks rataplan for the liven themes. that is exactly what i want.
Now i have a problem when cooking using 6.5 build 24619.
1. the phone canvas has the problem on scroll bar, already fix with phcanrc.dll
but the second problem appeared when my photo contact can not display on phone canvas when call come in.
2. click SMS on contacts did not display any number on "To:" section on SMS entry
any idea ?
lion_snake1 said:
Thanks rataplan for the liven themes. that is exactly what i want.
Now i have a problem when cooking using 6.5 build 24619.
1. the phone canvas has the problem on scroll bar, already fix with phcanrc.dll
but the second problem appeared when my photo contact can not display on phone canvas when call come in.
2. click SMS on contacts did not display any number on "To:" section on SMS entry
any idea ?
Click to expand...
Click to collapse
Hi lion_snake1 just to answer your both questions, I think it isn't a problem from the kitchen but a problem from build 24619, I didn't use that build so it would only be guessing what it could be, so I suggest to take a look at Da_G's thread if there is an answer for your question. You can find Da_G's thread here.
Goodluck buddy,
Rataplan said:
Ok, I will check the build and see if there is something missing, I thought I used it for cooking a NEON400 rom but didn't get any feedback so I will check this and keep you informed.
Greetz,
Click to expand...
Click to collapse
Have you checked this build?
Does it work for Niki's,too, if you used it for Neon Roms?
GLa'DOS said:
Have you checked this build?
Does it work for Niki's,too, if you used it for Neon Roms?
Click to expand...
Click to collapse
I checked this build and it's working, the builds are not device specific, so you can use every build you find, the only thing that is important is that you use dpi 96.
Regards,
But do you know how to solve this error: "No locales are available. Make sure the OEM_Lang_LCID folders and their matching
WM LCID ones are present.
?
GLa'DOS said:
But do you know how to solve this error: "No locales are available. Make sure the OEM_Lang_LCID folders and their matching
WM LCID ones are present.
?
Click to expand...
Click to collapse
I think that you forgot to check under Localization Settings your Locales, you can find that under the tab Project Settings.
If not give me some more info.
Greetz,