Hello
Can someone help me save my Imate ?
I got the official upgrade to 1.52.00 Ext 1.52.83 radio 1.06.01 from my existing CE image 1.03.00 Ext 1.03.20 and Radio 1.05.12
I ran this upgrade on a windows 98 with nothing else and the Imate connected over the USB cradle with power.
Then I got ERROR 101 - rerun the upgrade.
NOW, my Imate is dead and when I try the upgrade program I always get "ERROR 101".
What can I do to save it ?
Thanks, Dave
Related
Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
:lol: not buy serial cable!!!
there is an OFFICIAL UPGRADE ready and existing, but not yet PUBLIC,
it is one nice 40 MB RUU file which will uprgade your unit to english language:
Microsoft Pocket PC version 4.20.0 (Build 13252)
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
Indirizzo http://xda-developers.com/incoming/rom160wwe/RUU16006WWE_T-mobile_NL.exe
IT'S FANTASTIC AND EASY WHIT THE USB CRADDLE
What you may try to do, for a start, is to reinstall the ROM upgrade once again, USING THE USB CRADLE and nothing else. Better remove the SIM card before installing the upgrade. Also, make sure that the battery is fully charged. All through the upgrade process, do not touch the device.
Finally....
Next day When i was in my job put my imate in the cradle, ran the upgrade and it worked.....I am happpppppy ¡¡¡¡
Upgrade failed
I had the same problem as dherrero. However, I have no luck as him. My XDA II still dead can not be boot. Anyone can help? Thanks.
IT's DEAD
I have a MDA from T-Mobile for 3 weeks now. I find out about the rom update (RUU16006WWE_T-mobile_NL.exe), tried it and got the message that the update failed.
On my MDA screen therse is only the message "USB v1.01".
Running the update again doesn't help.
Is there a solution or do I have to contact T-Mobile?
Hi all ,
One of my Friends had the same problem , he tried another computer and it works , then guess what was the problem ???? We found that it was ZONE ALARM !!!
So please check You'r computers guyes ,it might be another software makes the upgrade failed .
Thanks
Hi all!
We have to be aware, that the upgrade program says "NO PROGRAMS RUNNING ON THE PPC AND NO PROGRAMS RUNNING ON THE PC ITSELF"
It's a hard lesson i learned years ago while flashing a BIOS..... if possible, do it at an UPS equipped PC (or notebook btw) to reduce your chances of killing your device.
Windows XP has many more programs running than one would suspect. As a first measure, kill all the ones you can in the right side of your taskbar, shut down your Anti Virus and Firewall, and cross your fingers while upgrading.....
Should we also shut down Activesync? Or is it needed for the upgrade?
Thanx.
I am in the same boat this day. Please help !!! I tried to upgrade the imate threw the club imate ... i downloaded ok i believe ... i did not use the cradel just a mini sync usb cord ... i used this before many times to sync... but when i tried to run the official update it stopped and now it says only serial v1.02 when i put it in the cradel it says usb v1.o2 its dead... no light for batter scharge nothing???? no sync at all please help
ActiveSync is not involved in the upgrade process. The upgrade program runs out of this, with it's own connection and settings via USB.
I haven't used the mini cord, so I'm of no help about it.
Try the upgrade program again, looks like it failed to fully flash your ROM. (That's why you don't see the charging light, it's Software controlled)
Good Luck!
mm
Try to update your imate using a cradle connected to a pc(usb). It should work
i have the exact same problem as highlighted by the others here, USB and v1.02 screen. Question is, how do you continue to flash your rom after it fails and you put back your unit into the cradle and activesync does not sync it anymore
the upgrade doesnt use activesync so it doesnt matter. Just put the imate in the cradle(in other pc, if possible) and run the upgrade
qtek rom update problem
hi guys. my qtek only says USB v 1.02. I cannot do any rom flash. what rom should i use. where can i download it from?
HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...
Installed a WM2k3SE downgrade from wm2k5 - now I cant activesync to my device (or install any different ROMS), activesync says it is connected, but you cannot open the program up! If you try to upgrade to a different ROM (I have one that I know works), the update program just crashes out! Please help.
I have ROM v 2.02.t1WWE
Radio 1.18.0
Protocol 1337.38
EXTROM 1.12.924 WWE
May have got a bit excited there - installed activesync 4 and it seems OK!
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected properly between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Simply get your WM5 version in the WIKI section and run it. That is all you have to do!
I asume you had CINGULAR WM5 and upgraded to AT&T WM6? Here you can find all shipped versions WM5: http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades and here all WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
Just pick yours!
enahsak said:
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Click to expand...
Click to collapse
Also, http://mrvanx.org has downgrade guides. Great one.
Its been awhile since I've used spb backup, but I thought that there as an option to selectively restore files. Have you tried this?
Latest AT&T WM5 rom is avilable direct from HTC... just download it and flash away... Puts you right back to latest shipped settings.
http://www.america.htc.com/support/8525/software-downloads.html
What are you trying to recover though?
HELP still on HOW TO DOWNGRADE
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
What operating system are you using?
enahsak said:
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Click to expand...
Click to collapse
I had this once too!
If you grab the official AT&T WM5 ROM from the WIKI this error will not appear!
Another workaround: extract the nbh file from your downloaded WM5 and flash it with CUSTOMRUU