DOWNGRADE from WM6 to WM5 on 8525 att - 8525, TyTN, MDA Vario II, JasJam Software Upgradin
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected properly between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Simply get your WM5 version in the WIKI section and run it. That is all you have to do!
I asume you had CINGULAR WM5 and upgraded to AT&T WM6? Here you can find all shipped versions WM5: http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades and here all WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
Just pick yours!
enahsak said:
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Click to expand...
Click to collapse
Also, http://mrvanx.org has downgrade guides. Great one.
Its been awhile since I've used spb backup, but I thought that there as an option to selectively restore files. Have you tried this?
Latest AT&T WM5 rom is avilable direct from HTC... just download it and flash away... Puts you right back to latest shipped settings.
http://www.america.htc.com/support/8525/software-downloads.html
What are you trying to recover though?
HELP still on HOW TO DOWNGRADE
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
What operating system are you using?
enahsak said:
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Click to expand...
Click to collapse
I had this once too!
If you grab the official AT&T WM5 ROM from the WIKI this error will not appear!
Another workaround: extract the nbh file from your downloaded WM5 and flash it with CUSTOMRUU
Related
HELP HELP - Imate died in upgrade, now got only "USB v1
Hello Can someone help me save my Imate ? I got the official upgrade to 1.52.00 Ext 1.52.83 radio 1.06.01 from my existing CE image 1.03.00 Ext 1.03.20 and Radio 1.05.12 I ran this upgrade on a windows 98 with nothing else and the Imate connected over the USB cradle with power. Then I got ERROR 101 - rerun the upgrade. NOW, my Imate is dead and when I try the upgrade program I always get "ERROR 101". What can I do to save it ? Thanks, Dave
HELP - trashed my xdaII installing wm2k3SE downgrade
Installed a WM2k3SE downgrade from wm2k5 - now I cant activesync to my device (or install any different ROMS), activesync says it is connected, but you cannot open the program up! If you try to upgrade to a different ROM (I have one that I know works), the update program just crashes out! Please help. I have ROM v 2.02.t1WWE Radio 1.18.0 Protocol 1337.38 EXTROM 1.12.924 WWE
May have got a bit excited there - installed activesync 4 and it seems OK!
Jamin rom downfall
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811) i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6! I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update , i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need! By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said: Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6! I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this! Click to expand... Click to collapse Hi animelover, Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS? Thanks!
Can not upgrade to WM 6.1
I've download the ROM "dkamin german 6.1". The I've reset my MDA, connected with ActiveSync and started the Himalaya Upgrade Tool. The tool can not read out the actual Firmware Version an ist also can not upgrade the MDA. What can i do? Cisko
upgrade problem?
My phone model is 838Pro and upgrade to WM6.0 by official ROM, now IPL 1.04 and SPL 2.03. 1/only SSPL method to install other version ROM or radio. is it right? 2/copy sspl to ppc and run, connect usb cable with PC and the then run RUU program to install OS or radio. process OK? 3/above process need XP PC to complete? Thanks you very much!!