Bluetooth driver for MDA II - MDA II, XDA II, 2060 ROM Development

Hello,
For one week now, I'm trying to connect my MDA II with a bluetooth carkit. This doesn't work 'till now. The main reason is the missing profile in the bluetooth driver. The MDA supports a lot of profiles, but not the handsfree or cordless tephony profile, wich is needed to communicate to carkits (and more and more headsets too).
Are there more people having this problem and does anybody know if there is an update of the bluetooth driver available?
Menno

The MDA II does not support the handsfree profile, and there is no add-on software that provides this functionality.
However, there are some handsfree sets that can use the headset profile (which is implemented in the MDA II). An example is the Parrot handsfree unit.
If your handsfree set does not support the headset profile, I'm afraid you're out of luck...
Cheers
Daniel

mbernard said:
Hello,
For one week now, I'm trying to connect my MDA II with a bluetooth carkit. This doesn't work 'till now. The main reason is the missing profile in the bluetooth driver. The MDA supports a lot of profiles, but not the handsfree or cordless tephony profile, wich is needed to communicate to carkits (and more and more headsets too).
Are there more people having this problem and does anybody know if there is an update of the bluetooth driver available?
Menno
Click to expand...
Click to collapse
Look at this site. Its in german. This link is recommended by Royaltek in it's FAQ, then the Royaltek BlueGPSMouse BT 3000 doesnt work with the Royaltek-Driver and MDA. I installed the driver from this site on my MDA II and now I have the contact with the mouse. At first, uninstall the old driver!
http://bluetooth.i-networx.de/

widder said:
Look at this site. Its in german. This link is recommended by Royaltek in it's FAQ, then the Royaltek BlueGPSMouse BT 3000 doesnt work with the Royaltek-Driver and MDA. I installed the driver from this site on my MDA II and now I have the contact with the mouse. At first, uninstall the old driver!
http://bluetooth.i-networx.de/
Click to expand...
Click to collapse
The software on this site implements a proper serial profile. It doesn't help with handsfree at all, unfortunately.
Cheers
Daniel

Daniel (and Widder),
Thx very much for your replies. I've already have contact with T-Mobile Netherlands with the question to deliver a driver for the handsfree profile. I'm still waiting on a reply.
The Parrot is indeed supporting both profiles. I will try the CK 3000. Do you have experience with this unit?
Regards,
Menno

Related

Headset option available but no Hands Free option on XDAII

I need some help and I'm not technical... when using my XDAII with only a Jabra FreeSpeak BT250 I had no problems at all. Recently I had my car dealer install a bluetooth hands free system (Parrot CK3000 - www.bluedrive.com) in my car and when I pair with my XDAII the headset connection is lost with the Jabra becuase there is no handsfree option on the XDAII. As I understand it, I must have a headset profile for the Jabra and a handsfree profile for the CK3000. Is it possible to have two profiles on my XDAII for two types of connections? If so, how? If not, does anyone know how I could have two headset profiles that I could easilly switch between based on the pairing device I want to use? Please help...
Re: Headset option available but no Hands Free option on XDA
Charles said:
Is it possible to have two profiles on my XDAII for two types of connections? If so, how? If not, does anyone know how I could have two headset profiles that I could easilly switch between based on the pairing device I want to use? Please help...
Click to expand...
Click to collapse
Well, the XDA II comes with Microsoft's Bluetooth stack, and that stack just does not implement the Handsfree Profile. Some people have, with some degree of success, installed a Widcomm Bluetooth stack on an XDA II. However, as the Widcomm stack was never officially ported to the XDA II, it cannot completely replace the Microsoft stack, so that solution has a few quirks (having two stacks, and switching betrween them for different applications). If you want to try that, just search for "Widcomm". Be advised, however, that the Widcomm stack is not freeware, and is not sold separately. So, all version you find are pirated.
Then there are the Pocket Bluetooth Tools (http://bluetooth.i-networx.de). I think they would allow you to have more than one Bluetooth headset paired with your XAD II, but unfortunately at least the version 1.1.0 does not work with your Parrot. I know that for sure, because I have a Parrot CK-3000 myself (firmware 3.13), and no matter what I tried, it didn't work.
And this is where your options end... no luck, I am afraid.
Cheers
Daniel
Two BT Stacks...what are the potential problems
Thanks for the initial support...very helpful!
If I install the Widcomm Bluetooth software what functions will not be supported/available. I currently have he Jabra FreeSpeak BT250 and the Parrot CK-3000 I would like to pair but also have a BT Sony Vaio Laptop PCG-Z1WAMP3 that I will pair over the next few days and plans to purchase a BT GPS unit in a week that works on the XDAII and the Laptop. Will Widcomm software support all my needs or will it fall short.
PS - before reading your post I tried Pocket Bluetooth Tools (http://bluetooth.i-networx.de) version 1.1.0 and I could not pair the two either. I was initially happy and finally maddened! Should this be removed before adding Widcomm if I do elect to proceed?
Cances of getting anything to work with your sony vaio (other than other sony kit) are slim, sony use their own peculiar bluetooth stack and it doesn't support any but the most basic profiles on any other stack. If I try to search services on my sony c1-mhp from my xda 2 with either widcomm stack or microsoft stack all i get is a load of serial ports.
I did see a thread a while ago about using the widcomm stack on a vaio, but can't remember where.
Re: Two BT Stacks...what are the potential problems
Charles said:
Will Widcomm software support all my needs or will it fall short.
PS - before reading your post I tried Pocket Bluetooth Tools (http://bluetooth.i-networx.de) version 1.1.0 and I could not pair the two either. I was initially happy and finally maddened! Should this be removed before adding Widcomm if I do elect to proceed?
Click to expand...
Click to collapse
Well, it'll be hard enough to get two stacks together working on one hardware, so I don't think it'll be a good idea to add a third player (the Bluetooth Tools) to the game.
I had the Widcomm installed only very briefly. Some time after that, more elaborate instructions on how to install and set up the beast occured on this forum, so your best bet is to search the forum for "Widcomm" and read everything you find. Be warned - it still is a big hack that involves manually adjusting Registry entries and such things.
Cheers
Daniel

O2 XDA II->WM2003SE->Sin->Merged->v1.0

This merged English version of WM2003SE is compiled for the Australian model O2 XDA II.
:!: NOTE: It is supplied as is. Use it at your own risk!!!
:idea: TIP: First backup your data and settings using either ActiveSync, SDBackup or XBackup - then download the attached ROM_Backup.zip - extract and follow the instructions in the ROM backup folder.
To install the merged WM2003SE:
1. Download the attached Setup.exe
2. Insert your O2 XDA II into it's USB cradle and confirm that a successful USB connection has been made with your PC
3. Run Setup.exe and follow the onscreen prompts.
Details:
The ROM image is based on version: 2.06.00WWE (ver 4.21.1088 build 14132)
The Radio image is version: 1.18.00
The Extended ROM image is a variance of version 2.06.100a (Sin.Merged.v1.0)
The Extended ROM contains the following:
Merge of ROM 2.02.t1WWE over ROM 2.06.00WWE, pre-configured with:
AltTab, Blackberry, Caller ID, Camera, ClearType Landscape, ClearType Tuner, ClearVue, CMD, Contacts, Explorer, ExtROM Tools, Flash, Fonts, IE Tools, IntelliDialer, Keyboard Extension, Midi Ringtone, MMS Composer, MS Reader, Notepad, O2 Customisations, Paint, Print, RegEdit, Reset, Rotate Screen, Run, Scheduled Tasks, Space Invaders, Task Manager, Tray Launch, Video MMS, WiFi & BT Headset/Handsfree Profiles.
The Autoconfig only contains support for the following Australian Carriers: - Optus, Telstra & Vodafone + "Not Listed - Set Manually"
KNOWN ISSUES:
Today Screen BT Profile Icon likes to play Hide'n'seek
BT HandsFree Mode may disable headset mic.
A choice of either HandsFree or Headset profile is now enabled, please select only one or the other.
NOTE: BT HandsFree Mode may disable headset mic
Uninstall "Version Sin.BT.Handsfree" from "Settings->Remove Programs" if necessary.
:arrow: INFO: New version is here!
Thanks very much Sin!
Been Looking forward to this SiN! Made my weekend!
Thank Sin for putting it together.
I originally Had and Orange SPV M1000, and upgraded it with the O2 1.72 version, in the hope that it would sort out the problems with Blue Tooth and Handsfree car kits, which it did not of course.
Thought I would try the rom from Mystery Man, which interestingly did not require any changes to the files to allow it to update, which also did not work the blue tooth, so I was going to try just updating the Radio to 1.18, but saw your new package pop up, so thought what the hell, give it a go, and now I am made up cos been very frustrated that it would not work in car kit.
The car kit I have is the Nokia CK-7W Blue tooth if this helps anyone else, I also assume it will work with the others, in particualr the built in ones in BMW's.
So thanks again everyone, I can sleep now.
Mark
Other known issues..
Thanks for the job SIN!
I have to point out a couple of issues I'm having since long, that seem related to the BT problem, but looks like no one else is having: "DUAL STEREO" sound in both (XDA II and Handsfree/headset) devices.
No matter BT headset is "enabled" or "disabled", the devices configured as "handsfree" are operational. Plus, my HBH 35 headset refuses to work unless configured as a handsfree device. After that, every handsfree device works in "STEREO" mode. Nice for multi part conferences, but annoying for your caller, who hears every tap on the XDA in your pocket, since the mic is operational no matter what.
I'm really the only one with this problem?
:?:
Hi Sin
Just a quick question, tried to change the splash1 & 2 images, to get away fro O2 image you put into file, but having probs with corrupted display if the image, howd you do it please, as I understand the normal method does not work with Chinese and Trial versions !
Many thanks in advance.
Mark
BTHFP
Does the headset mic work on handsfree profile Sin?
thanks Sin
I tried to modify the extended ROM to modify the provider list but couldn't found the autoconfig.txt, is it ok to create autoconfig and put it there? or did you merged the autoconfig inside Sin.Merged.v1.0.cab?
please let me know
thanks
Brumie
Re: Other known issues..
Looking Glass,
Your not the only one with this problem.
I have a bmw with bluetooth and it does the dual stero trick.
I have a Bluespoon Digital and it also does the dual stereo trick.
Has any one tried removing the head set profile and leaving just the hands free
Thanks
Jon
hai where can i download the attachment? i need to upgrade my xda2 urgently.. thanks.
Other Bluetooth Devices
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Re: Other known issues..
"I have a bmw with bluetooth and it does the dual stero trick
Click to expand...
Click to collapse
I just tried the car again and it worked perfectly. So it looks like I only have the problem with the Bluespoon.
I'm pretty happy with the car working as that was what I really wanted.
Johnson..... you have to log in then you will find the attchments at the bottom of the first post in this thread.
Guest... I dont have a bluetooth GPS. Ive no idea if it works. I do know you cant get the Sandisk WiFi SD card to work which is a bummer.
Jon
ExtendedROM...
@ Sin,
This merge ROM version of yours, what is the most very important file that I need to keep on my extended_ROM? Last time I used your version without any problem But I need to remove some CAB file for my own customization. But now seems that ms_.nbf has only one file (Sin.Merged.v1.0.cab) which I think all the CAB file was in there.
Is it possible to gave us your merge CAB without the rest of installed program? Or is it okay to delete some CAB on extended_ROM after installation (cooked-own ROM style)?
Thanks!
Re: Other Bluetooth Devices
Anonymous said:
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Click to expand...
Click to collapse
What ROM are you using now? I used to have 1.72 ROM and I need to used Bluetooth tools to be able to use both BT headset and BT GPS (Belkin/rebadge Fortuna Clip-on). BUT with ROM 2.06 (mysteryman), Sin.AU.v3.5(extended_ROM) and 2.02t1 Reg CABv3.cab (from henrylim). I am no longger needed bluetooth tools, it works without any issue.
file mentioned can be found here:
http://forum.xda-developers.com/viewtopic.php?t=13660&postdays=0&postorder=asc&start=50
Hope this help. I haven't tried Sin.merge.v1.0 yet but I will soon.
Re: Other known issues..
916senna said:
Looking Glass,
Your not the only one with this problem.
I have a bmw with bluetooth and it does the dual stero trick.
I have a Bluespoon Digital and it also does the dual stereo trick.
Has any one tried removing the head set profile and leaving just the hands free
Thanks
Jon
Click to expand...
Click to collapse
Nice to know, thanks for info, I was about to think no one else has the problem.
I've been experimenting during the weekend, and found that the problem remains quite the same: some headsets/handsfree only work if the HandsFree profile is selected, and then the "dual stereo" problem arises again.
By contrast, version 2.20 properly handles every "audio" device (at least my devices) but I haven't found how to made BT ActiveSync back to life. Plus the other known issues with the translation (May I help Buzz_lightyear?)
Resume: Excellent job by Sin (regards) but the whole BT thing is not yet fixed. I like his "new compact" Ext Rom, but since HandsFree profile is at this time more important to me than BT ActiveSync, I'm going back to 2.20.
Not there yet...
with WMP 10
in rom, with wmp 10 ?
Re: with WMP 10
bos_xda_II said:
in rom, with wmp 10 ?
Click to expand...
Click to collapse
Only 2.20 comes with wmp 10. Sin's rom has version 9.
Not there yet...
Re: Other Bluetooth Devices
Anonymous said:
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Click to expand...
Click to collapse
I have a CoPilot Bluetooth GPS unit and it does not need Bluetooth Tools to get it to work via serial port emulation. I'm using 2.06 ROM.
With the BT GPS bonding, you get to say you want it to be a serial port but you don't get to specify what specific port number like with Bluetooth tools. This is not a problem with CoPilot software as it will FIND the serial port and baud rate in it's Bluetooth connection/configuration setup.
I also have a SanDisk SDIO WiFi card which also works fine (note the card is NOT the SDIO RAM+WiFi though!).
Re: Other known issues..
916senna said:
"I have a bmw with bluetooth and it does the dual stero trick
Click to expand...
Click to collapse
I just tried the car again and it worked perfectly. So it looks like I only have the problem with the Bluespoon.
I'm pretty happy with the car working as that was what I really wanted.
......
Jon
Click to expand...
Click to collapse
Hi again!
How exactly did you get to eliminate de "Dual stereo" effect in your carkit? I have too a HBH 35 headset and the problem remains on both of them.
This is my only complain, everything else works so well! And Sin made such a good job putting the Ext Rom together!
Thanks Sin for the easy to install ROM.. well done.
My Bluetooth GPS works fine, a bit of a change not having to select a port, but the port is displayed so that wasn't a problem.
My Logitech Headset refuses to work. It pairs with the XDAII but I am unable to iniate a call from the headset and the mic doesn't work.
The Bluetooth smybol is gone from the task bar too... probably something I did...
Is there a cab about that allows me to reinstall the bluetooth section just in case I stuffed somethign up?
Thanks.

Bluetooth in general and HF800 BT speaker in particular

Has anyone tried to pair and use the Motorola HF800 Bluetooth speaker together with the Wizard?
According to http://www.mobiletechreview.com/tips/Motorola_HF800.htm, the following functions, apart from being able to produce the audio output from the pda, are supported by the speaker: "voice dialing, redialing, putting a call on hold and call conferencing". Do these features work together with the Wizard?
Coming from fantastic SonyEricsson and Ipaq bluetooth environments, where I never had to worry about bluetooth functionality, I have realised that the MS Bluetooth stack isn't to be taken for granted...
If I have understood it correctly, the Qtek offers "Dial-up Networking", "Serial Port" and "Object push" as bluetooth services. Is there a limitiation regarding services, provided by other paired devices, that it can utilize (eg the above mentioned services provided by the Motorola speaker)?
Thanks in advance!
Bluetooth problems too!!!
Hi,
I am not sure about your problems with the Motorola headset...
All I can say is that i am very disappointed with the functioning of the Nokia Carkit ck7-w in combination with the Qtek 9100... I only have this carkit for about 6 months, and now it doesn't work with the Qtek 9100. Well, it works but there is a very annoying echo for the person on the other side of the line...
Appearantly nokia say that the carkit is only fully compatible with Nokia phones... So what's the thing with Bluetooth, i thought this was meant to be a universal system, so howcome it is still brand-specific...
Anyway, if anybody has a solution for Bluetooth communication with this carket, or the Motorola Headset it would be very welcome.
Re: Bluetooth problems too!!!
Maarten78 said:
Hi,
Anyway, if anybody has a solution for Bluetooth communication with this carket, or the Motorola Headset it would be very welcome.
Click to expand...
Click to collapse
Please do not "hijack" this thread. My questions were:
1.) Has anyone tried to pair and use the Motorola HF800 Bluetooth speaker together with the Wizard?
2.) If I have understood it correctly, the Qtek offers "Dial-up Networking", "Serial Port" and "Object push" as bluetooth services. Is there a limitiation regarding services, provided by other paired devices, that the Qtek is capable of utilizing (eg the above mentioned services provided by the Motorola speaker)?
Stepping on your toes
Sorry man, didn't mean to step on your toes!!!
As nobody replied to your item for over a month i decided to try and broaden the subject so maybe YOU and other users get helped in one go.
Obviously i see these items as related since they all deal with the bluetooth issues from Qtek....
Anyway, let's try to solve both 'problems' and wait for replies for other Forum users.
Ciao!

Bluetooth problem with WM6 ROMs for ATOM

Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????

Hermes Bluetooth - Fiat Car Speakers

I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
291 said:
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
Click to expand...
Click to collapse
Pairing a Hermes with a Bluetooth Car Kit is certainly possible, and indeed routine. I have successfully paired with my two Ford cars, with a variety of WM5, WM6 and WM6.1 ROMs.
I merely followed the usual steps to set up a partnership, and ensured that the partnership was set as 'Hands Free' on the final page of the setup process.
So my experience is - no dramas, and I can't see why you are having problems. The car is, after all, just acting as a Bluetooth headset.
Transfer of contacts to your Car Kit is a bit more problamatical, as you have to set up Bluetooth Sim Access Protocol (BT SAP), to give the car, as it says, access to your sim card.
Hi and thanks for the response.
I have no problem pairing the hermes and it reads all my contact information and does everything I would expect save for the sound; I don't get any sound from the cars speakers and yet it all works perfectly with other makes/models of phone/pda.
I suppose the problem would be easier to solve if none of it worked but it does. I watch the car screen as it tells me I am making a phone call from my address book and I can see calls coming in but I cannot use the microphone on the PDA nor hear anything via the pda or the car's speakers. The XDA Exec (WM6) Nokia 5300 and XDAIIi (WM2003) work flawlessly (I borrowed those from my friends).
Thanks once again.
291 said:
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
Click to expand...
Click to collapse
291,
I've had the same problem...
But found this program... From JetWare Mobile - Its not free but there's a trial period to at least see if this fixes your problem...
http://www.jetwaremobile.com
Now My bluetooth on phone and car works flawlessly, including: Music connection (can play Mp3's from phone and contacts loaded to the car stereo) I was even able to get Voice Commander to work through the car stereo but could not get announcements to work (a known issue with VC 1.6)
Look at this post, may help...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=75BT
Hermes with RT4 system
I have got th esame problems with my hermes and my Jumpy with RT4 and bluetooth connection. I can drive my hermes, make a call by the way of the RT4 but speakers and mic are out. The only solutions to make them working is to make call by my hermes ans after RT4 working good and for and incoming call, accept it by the way of my Hermes. With this solution, I can ear ans speak unsing bluetooth system. If some one can help me, thank a lot...

Categories

Resources