Hi,
I'm trying to use MMS on my XDA II... Everything seems to be OK to send MMS-messages (my recepient receives my MMS-messages without problems).
When I receive MMS-messages from someone, I could not download them! I re-entered my settings a few times without success! Then I contacted my mobile network provider to see what's happening!
I only receive the header of the MMS-messages, but I could not download that messages!
What I noticed is that I'm using version 1.5.0.7 of the ArcSoft MMS Composer. Do I need an upgrade to receive MMS-messages or what?
I know there is a newer version (1.6.0.9), but I don't know if this will solve my problem.
I took a look at the website of ArcSoft, but could not find any upgrades or patches.
Anyone has a suggestion what to do or had the same problems?
FYI: Every 2 hours I got a notification that I have a new message, but this always the same message...
Thanks,
Sam
A collegue of mine has a similar problem, he can send ok, but does not receive any MMS. His XDA2 when configured for another Telco Provider has no problems. Will revert if I find a solution. Apparently not all Telcos have the same infrastructure setup.
talked to the telco provider, they believe it is their SIM card. Are sending me a new one.
Related
Hello,
Just recently I noticed I can't send long sms anymore from my O2 XDA. Before it used to work. The only thing I've done is to add general sw to it, in addition to that patch showing senders name rather than only mobile number when receiving new sms-messages.
Does anyone have a clue what this is? I have checked all SMS settings and they are definitely fine.
The error message I get is this one:
'Your SMS message cannot be sent. Contact your customer service center for more information.'
Hmmmm... please help..
Fred
guest
What version Rom?
What software have you added?
ROM version: 3.14.17 ENG
Radio version: 4.17 (just upgraded, but had problem also before that)
Protocol version 32S54
Programs added recently:
SMS-Name Patch (Paragon Software SMS Name)
HTC PROGRAMME B (the radio-upgrade..??)
ACDSee Mobile for WinCE
Macromedia Flash Player
Tillanosoft SmallMenu
DK ipCalc
Spb GPRS Monitor
Pocket Media PocketDivx
.. and some more..
I don't know when it happened, because I usually do not write
so many long sms messages..
Fred
(it's me again, got a username now..)
I hereby conclude that my problems sending long sms's must be something weird with my local Telenor Mobil provider in Norway. I was in Monaco last week, and I had no problems at all to send long sms's, even to same recipients that did not work before... And even by using the same Norwegian sms centre... hmmm, really strange thing.. So I reported this to my provider, of course getting all general nonsense replies with settings on mobile etc, but they also admitted that the QTEK1010 phone could only send messages less than the length of 2 sms's at a time????
I don't understand this at all... is my phone pushing the sms's out too quickly for the sms centre? does it think I am flooding it??
Any ideas here, any other free sms message centres I could try this with?
FS
Hi. I am asking this question for my partner who has an iMate Smartflip and she always roasts me for not sending here texts when I know I have. (I have a TyTnII with delivery noti on).
It appears she sends an SMS to me and I answer immediately, her Smartfilp does not pick it up but if she receives one 'out of the blue' it's OK. This is also very hit and miss in the way it fails.
Just wondering if anyone else has seen this. Checked the Forum and can't seem to see anything.
Cheers.
BTW, tried the obvious and put the SIM card in a different phone and it works fine....
Doesn't she use any data connection (GPRS)? The SMS should be delivered even when are connected but I have experienced delays of messages (I recieved SMS's few hours after the sending even my phone was turned on).
No GPRS in use as it's a PAYG SIM. Just the standard service center number.
It's really strange, the messages are not delayed, just don't appear on the phone even if I send them and get back a delivery notification as if its getting certain data it can't handle.
It's probably been fixed in a HTC firmware update but you know how iMate are slow to follow...
You can install any firmware you want to. If it's not a problem for you/her I hope update (which wipe out all user data as well) helps you. The newest firmware from Cingular would be probably the best one. (I dont have phone from Cingular but Im using their fw so it must be the same with iMate)
Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.
How do everyone...
I've got a pink Hero from mobiles.co.uk for my girlfriend (really it is for my girlfriend) and I'm having the strangest issue with MMS on it.
If I send a message to myself, it sends it fine and receives it fine.
If I send it to another phone, it sends fine and the person receives it fine.
However, If I get one sent to my phone from another phone, it wont receive it.
I just can't understand why, is there anyone here who can actually receive MMS messages from someone else who is on Vodafone?
I haven't bothered posting my APN settings just in case its a known issue but I will do if some people can send messages. I'm on Modaco 2.6 too.
Cheers
Nobody on Vodafone here and tried to send an MMS?
Come on, let us know if you can or can't... be helpful
same here
my Hero was receiving mms ok, then just stopped cant receive any now, on vodafone cant seem to find out why, starting to annoy me, no bluetooth and now no mms why did i buy this peice of sh** aarrgghh
at my local (AUSTRALIA) virgin/optus/vodafone store he has a magic vodafone & i have a hero optus & we were testing this as i was setting up my MMS & all worked ok
SEARCH:
http://www.google.com/cse?cx=000825...+hero&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
having the same trouble on my Hero.
UK vodafone, using MCR 2.2 ROM (will update soon!), MMS worked pre uprgade, but now does not. Tried all sorts of APN settings.
Hey all,
Just wondering whether its me or not, but ever since the update if I type a text longer than '1 message(+9) '(weird but cool feature if I must say) my phone will Not send the message no matter what..and as long as I have it under that character limit it works fine...
I'm in australia and with Optus, and I work for them as well so I know it isn't my sim or my account :/
Anybody else had this issue? Because I know currently the samsung galaxy S(2.1) is having compatability issues with texting, but I wouldn't imagine it'd be the same cause...
- Shalz
Sent from my X10i using XDA App
I just did a test text and it worked fine.. 2 messages sent no problems.. (UK Vodafone).. World Generic 2.1 firmware.
just wondering did you update to the optus 2.1 or the generic?
I have a feeling i must be on the generic firmware because i did have 1.6 Rooted prev. to the update
I asked the guys at work about the update today and none of them so far have been able to update...even though i downloaded the Australasian PC Companion.
but even picture messages and everything else works perfectly fine...its just that one thing =/
I have the exact same issue, it happened to me also on 1.6 bu that was more generous and gave me 2 message lengths before it would fail to send. its strange as the first couple of messages i sent on the nordic 2.1 update where fine and they were well over 2 message lengths and then suddenly if i try to send one over 1 message length it fails!!! weird
would love to find the reason to this
Someone found any solution FOR THIS??? Help
It's saying "Could not send" for me, but is actually sending the first 160 characters of the message
Edited to add: I'm on UK Vodafone with the Global Generic 2.1 firmware.
Further edit: I'm able to send long sms to myself, just not my intended recipient...? She's on O2, could this be why?
Even more edit: Just tried sending to someone else and they didn't receive anything?! Very inconsistent!
sms Issue
Hi,
I have the same issue with my sms, it will not send more than 1 message otherwise the text bounce back saying message not sent, I just upgraded to 2.1 Nordic. The problem did exist when i was on the 1.6 but then the message will not send only if it was more than 2 messages, I am on vodafone uk, my phone was not debranded whilst running 1.6.
Any help will be greatly appreciated.
zerro2hero said:
Hi,
I have the same issue with my sms, it will not send more than 1 message otherwise the text bounce back saying message not sent, I just upgraded to 2.1 Nordic. The problem did exist when i was on the 1.6 but then the message will not send only if it was more than 2 messages, I am on vodafone uk, my phone was not debranded whilst running 1.6.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
I still haven't found a solution to this, interesting that you're also on UK Vodafone though, maybe it's something to do with them rather than the firmware?
has anyone found solution to this I have Rogers X10a and Telus sim card in it. Can't send sms if its longer than 160 charecters . Please help
I'm having the same problem as well. Any message over 160 characters and it won't send. This has actually resulted in my not being able to send shorter messages after trying to send a message that is over 160 characters. Not sure what is going on here or if there is a setting that can be changed for this.
I'm in the U.S. on AT&T. Used the xda flash to global and rogers and neither would send an sms message over 160 I guess? (it's 2 sms) Did a global firmware to 1.6 and then updated to x10a 2.1 via sony and then tried and it still would not send. It will send through GSM however using the edge network. It must have something to do with the h network then and no I don't get 3g to pop up at the top of the screen ever..
I'm not too sure what the problem is here but it is the only one I am having on my phone, everything else is working great!...
If anyone can help us all out with any ideas or suggestions it would be great but as of now it sounds like it's a problem with the new software from sony. Gonna try messing with the sms apn a bit and see if I come up with anything but as of now 2.1 sms is considered broken in my opinion.:/
im having the same problem. im using chompsms and at the botton, instead of saying 160 char it says 70 and wont send more than two texts long. If the network is changed to GSM only, any size text will send but then internet is slow unless its changed back. AT&T settings were found automatically but they are all correct.
my SE Xperia X10 on 2.1 wont send messages at all. no matter the size. ive tried to send messages like "Hey" or "No" and they dont send. Im with in Canada, with Rogers. And its not my signal because i have 4 bars...
-Thanks
Hi All,
Just wanted to let you know we had this posted on our forum also at talk(dot)sonyericsson(dot)com and I've sent it off to the correct team to find us a solution, or at least get a comment from them. I'll update you all here when I have more info.
-Jeff
Sony Ericsson Answers Team
Jeff-SEAnswers said:
Hi All,
Just wanted to let you know we had this posted on our forum also at talk(dot)sonyericsson(dot)com and I've sent it off to the correct team to find us a solution, or at least get a comment from them. I'll update you all here when I have more info.
-Jeff
Sony Ericsson Answers Team
Click to expand...
Click to collapse
Thanks Jeff! As I am having this issue too, awaiting for any news about it...
Hi Everyone,
I've heard back from our team today. This is not a generic problem. I will need information from your phones to pass on so I can duplicate the problem. Please PM me the following details:
Country:
Service Provider/Operator:
IMEI:
SI#: (SI is the ####-####.# on the back of the phone)
Did this happen in 1.6?:
Did it ever work on 2.1?:
I need at least 5 examples to pass to the team to move this forward. I will update you when I've collected these.
Hi all,
Ok, found a solution - try this and let us know how it goes, its worked for me!
1. Open dialer and dial: *#*#4636#*#*
2. Select Phone Information from menu
3. Scroll down to SMSC
4. Enter SMS centre number given by your service provider in this box
5. Select Update
I got a "update error" message but it still seemed to save the number, but with " and a 3 digit code after it.
If the above doesn't work, as a short term solution you caould switch to just "GSM" in your network settings and this also works - not ideal, but it's a workaround!
dubbug1971 said:
Hi all,
Ok, found a solution - try this and let us know how it goes, its worked for me!
1. Open dialer and dial: *#*#4636#*#*
2. Select Phone Information from menu
3. Scroll down to SMSC
4. Enter SMS centre number given by your service provider in this box
5. Select Update
I got a "update error" message but it still seemed to save the number, but with " and a 3 digit code after it.
If the above doesn't work, as a short term solution you caould switch to just "GSM" in your network settings and this also works - not ideal, but it's a workaround!
Click to expand...
Click to collapse
Didn't work for me, UK Vodafone.
doesn't work for Telus Canada