Related
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
After I tried to downgrade my Qtec2020 from WM2005 tot WM2003SE the updated stoped in stage 1.
This is what I found in the RUULog.log file:
19:15:11 Connection with Serial
19:16:31 Begin stage 1
19:17:01 CE Erase retry 1
19:17:31 CE Erase retry 2
19:18:01 CE Erase retry 3
Now I am stucked in bootloader mode and tried softreset, hardreset, special WM2005 hardreset but nothing seems to work. I have only a grey screen with Serial v1.02 on it.
Is there anybody who could help me
I've never performed any downgrades from WM5.0 but I have an idea that could work?
Install WM5.0 again, then perform a Hardreset but this time perform the Registry and Storage format (press power+record+camera+reset pin for about 5 seconds and you should see a menu on the screen, by using the record button to select an option and camera button to change to YES. It should be NO, YES, YES and press ACTION button to save changes). Then unhide the Extended ROM and erase anything in there.
Then perform the downgrade to WM2003SE.
I hope this works for you...
Regards,
Rayan
Thanks for the information but it's not the solution.
I tried to install WM5 again but I get an error 112 during the install.
The RUULog.log file:
20:42:03 Connection with Serial
20:43:26 Begin stage 1
20:43:56 CE Erase retry 1
20:44:26 CE Erase retry 2
20:44:56 CE Erase retry 3
The device is still stuck in bootloader mode. All the reset actions won't work (soft, hard, special)
Have you tried the upgrade/downgrade method using an SD card instead of the cradle/pc?
No I only tried it by USB/PC. I will search the forum for how to do this and give it a try. I will let you know later if this is the solution. Thanks for the information so far.
Regards Marco
I search the forum but can't find any way to do this. Can someone tell me how to flash by SD card
It's in the Wiki, not the forums...
Here you go:
http://wiki.xda-developers.com/index.php?pagename=XDAtools
Good Luck!
Hi, I was just upgading my XDA 2 os when my laptop froze in the middle of the upgrade! Now it only has the o2 startup screeen it won' turn off or connect to my computer to complete the upgrade. What can I do?
Is my Xda gone for good??
skud try aggain
you can put it back in bootloader mode and try aggain
this time on a destop you know power problem in laptop
you will not want a power failure in the middle of an upgrade
hope thats helped
Stuck on Bootloader
I experienced the same thing too.
Just detached battery from your device for about 10 minutes (I pressumed, may need more time)... then do the downgrade again.
in your PC task manager ''end process'' the ff:
''wcescomm.exe''
''WCESMgr.exe''
''rapimgr.exe''
now connect again the device and start the reflash...it works for me.
hope this wl help you...
No joy I'm afraid. How can I get it back in bootloader mode when I can't get past the O2 startup screen. Putting in an sd card Doesn't do anything either it is completely dead except for the annoiying but colorful O2 Logo.
Ok, it just turned itself off so I am after turning it back on andnow all I have is a white screen! What is going on? The laptop crashed when it was at 65% in the upgrade proces.
I'll give this taskmanager thing a go and get back to ya.
Thanks for all the help btw!
I have placed a ROM.nb1 on my SD card, but I get a eror with the XDA OS Image Tool. It looks that I can't find any way to get out of the bootloader mode whatever reset I tried. The battery was out for almost 12 hours but this also makes no difference. Is there a other way to flash by SD card or is there a way to reset/upgrade the bootloader mode. I think the bootloader mode hangs or is corrupt.
Regards Marco
I've tried that now and it still won't connect and still the same white screen! Any othere suggestions? Is there anything I can download which would force a connection or install something onto my XDA or does anyone know how I can get past this blank screen and maybe get to the settings window?
This must have happened other people anyone managed to fix this?
:!: :!:
hey power kite! It seems we got similar problems but your a bit ahead in getting it fixed. Can you tell me where you got the Rom.nb1 file so I can give this XDA tool thing a go?
What kinda power kite you got BTW?
Here is the link where I get the NB1 file
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=sd+rom
Good luck
Cheers Power kite,
I was just doing a bit of seaching on the sd flash method and found a website that takes you throught it step by step if your interested
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=93&PN=1
Hurray I'm back in business!!! Talk about relief! :lol: Its upgrading as we speak!
Now just to watch it like a hawk and not let this crappy laptop crash again!
Thanks everyone!
Give that link a look Power kite.
Skud
99% !!!!!!!
Great that it worked for you.
I did procedure 1, 2 and 3 but I'm still stuck in bootloader mode. Every upgrade WM2005, WM2003SE wich I have flashed before give me an error 112. I have flashed my SD card but I don't get any instructions on my screen.
Is it possible to install the bootloader again or upgrade it. I think my problem is the bootloader.
got stuck on o2 splash screen. don't know what happend and what to do.
got any tips?????
thanks
Do a hard reset -> press the power button and the reset button at the same time
i've done it already and still hangs...
Reflash the rom with one from your original operator. If you're using an o2 xda please download a rom from www.my-xda.com and follow the on screen instructions.
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset button SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
sorry, forgot to mention, yes its himalaya.
ok, i will try all your advices
thanks a lot
rago,
thanks for the tips, it worked.
ur always welcome bro
good to know that u have ur device back
RAGo, I did the same, and it said MODEL ID ERROR. How to fix that? Mine is now WM2005.
hi prd00...
replace the HimaUpgradeUt.exe in ur upgrade folder with the attached file,u will bypass country ID error...
good luck
RAGO :lol:
Hi all,
I think I need help from you guys. I have my xdaII dead with screen showing bootloader(it turns to USB when i plug into usb port). after I followed the instructions above...it shows model ID error. Please help....
problem solved
sorry guys...i forgot to use the given attachment file...thanks a lot.
Special thanks to RAGOv. your tips is worked.
splash
good day.
i have similar problem. it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install teh ARABIZER.
thank you.
splash
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
dead XDAIIS (in bootloader mode) please help..
Dear Guys,
My XDAIIs is in bootloader mode (it shows serial--> at top and V 2.07--> at bottom, and doesnt turn to usb when i plug into my usb port). Does anyone know how to fix it? Please help....
hi ordinary...
haven't u said it worked!!!so what happened next???!!
plz explain more,for the mean while try changing the USB port ur using,check ur cable,and try to change the computer(desktop/laptop)...
if it doesn't work plz explain more what happened,so we can help u find the solution...
@arcquisumbing:u are not clear in ur post my friend...what same problem(are u in bootloader mode???!!),how did it happened after installing item from the extended rom????and u want a solution for what???!!!
sorry i couldn't help u my friend but plz try to explain more so we can undestand ur problem...
RAGO :lol:
stuck in splashscreen
i'm sorry.
i was referring to the stuck in splash screen.
after the hard reset, autorun was initiating installations for the contents of the extrom. i installed each and every item and at the end of it, it required resetting. i just clicked on yes to reset, then when it did, it just stops at the splash screen. i tried waiting for an hour or so, maybe it would just come, but still to no avail. i tried re-installing everything, but still the same thing. but when i tried NOT TO INCLUDE the ARABIZER, everything worked just fine.
now, i'll just pray for two things, 1-that you can help me solve this problem, and 2-that the light at the end of the tunnel is not a train.
thanks. more power to you.
hi arcquisumbing
now if u still have a 2003 OS on ur device,wich i doubt it,(i've read ur post in the thread How can I increase Storage memory in WM 2005),then ur problem can be solved inchallah :wink:
*if ur device is i-mate,do the following:
1-remove arabizer from Ext ROM,so ur device can enter OS
2-install arabizer cabs after being in the OS
download arabizer cabs from here http://forum.xda-developers.com/download.php?id=6292
*if ur device is not an i-mate,then u have to wait untill my no brand arabizer succeeds.... :wink:
RAGO :lol:
Re: splash
arcquisumbing said:
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
Click to expand...
Click to collapse
Hey bro since you have an Imate! Download this file from clubimate http://www.clubimate.com/support/PPC/ROM/RUU172810WWE_CDL_SKU2.exe and flash it.
I'm sure your problem will be solved for sure
Ps : RUU172810WWE_CDL_SKU2.exe is just the Arabic Extended Rom
dead XDAII and XDAIIs
Hi RAGOv,
THank you for your willingness to help my problem
1. The one I said worked is for my xdaII, but only to pass the MODEL ID error (it runs well, after i use your attachment file. I upgrade it to O2 ROM upgrade 1.66 WWE). However, After finish upgrading, It still stuck on O2 splash screen.
2. Now, Im facing the other thing. "the dead XDAIIs". Its screen only appear O2 splash screen when i put on the battery(even i already did a hard reset). Then I tried to change mode into bootloader mode (by pressing power button, record, and reset).in the end, after I did an upgrading. it also stucks on O2 splash screen.
Please help...I dunno what to do anymore..
My Atom stucks in Update Utility mode ! I flash almost roms available ! I can complete but still stuck ! Any idea ? Please help me !!!
1 Remove your sim and sd card.
2 Press "Power" + "Action" + "Soft Reset" to enter the BootLoader
3 Connect to the pc via usb cable
4 Run Atom Upgrade utility again.
don't work
i have the same problem..did you solve your problem? if you did, please tell me how to fix this problem...stuck in update utility screen...
You have only one choice. And that is to return your Atom for repair. Mine was actually replaced with a new one 8)
See here http://forum.xda-developers.com/viewtopic.php?t=50749
xda ii s boot loader mode
Hi iam lok,
Is there any updates on the Boot loader problem.
Regards
Lok
IamGuest said:
1 Remove your sim and sd card.
2 Press "Power" + "Action" + "Soft Reset" to enter the BootLoader
3 Connect to the pc via usb cable
4 Run Atom Upgrade utility again.
Click to expand...
Click to collapse
Guys, dont worry. You have to be patient.
I had the same problem and following O2 Support suggestion
I returned it to their service center .
Now forty (40) days later I a still waiting for something that had a max turnaround of five working days.
take battery out - start update utility and stop at screen before it starts to install.
put battery in and connect to pc and then click continue
worked for me a while ago... i was just listing steps from my memory so i couldve written something wrong there
The steps are not clear :roll: Do you take battery out and connect atom to pc before starting update utiliy?
you take the battery out so the atom shuts down completely
and then you turn it on/plug it in and immediately run the rom upgrade
if you want to solve this problem use anther pc to upgrade your O2 ATtom
because the problem in your PC not pocket ( A atom) .
i had the same problem before i solve it when i change pc
I tried on three different laptops and it still did the same...would not finish flashing radio rom and now stuck in utility update black screen...any other ways to repair this problem?
ok had this happen to me a few times, seriously cant tell u what worked but keep trying to do soft boot and boot loader, and battery removal and reboot the computer, then try update again...
Each time it happened to me i had to try and try and after a while (maybe its a time thing) it worked amazingly enuff.......i was told to take it back to store, but perserverance won out!!.....
i figured if i have to take it back i have nothing to lose so i tried all the solutions and eventually it responds........
Good luck..
I hope this helps.
I've been fighting with my Atom for a few days and found a fairly reliable solution for the failure to complete the upgrade. I take out my SD card remove the Battery and the SIM, replace the battery and the unit goes into Update Utility. I then connect it to my PC and the USB connected appears on the Atom screen.
I am then able to run the upgrade utility at which point my Atom was previously running. In my case the upgrade that was released in February Xda-Atom-ENG-20060123.exe, this runs through without issue and my Atom is installed cleanly again.
Running a subsequent upgrade, it hangs again in the Update Utility again, but I can restore to the previous version successfully and have done repeatedly.
NeilB said:
I hope this helps.
I've been fighting with my Atom for a few days and found a fairly reliable solution for the failure to complete the upgrade. I take out my SD card remove the Battery and the SIM, replace the battery and the unit goes into Update Utility. I then connect it to my PC and the USB connected appears on the Atom screen.
I am then able to run the upgrade utility at which point my Atom was previously running. In my case the upgrade that was released in February Xda-Atom-ENG-20060123.exe, this runs through without issue and my Atom is installed cleanly again.
Running a subsequent upgrade, it hangs again in the Update Utility again, but I can restore to the previous version successfully and have done repeatedly.
Click to expand...
Click to collapse
Hello neilB. Could u, or anybody, tell me where I could find ROM such as yours? I wanna try it to my Atom. Perhaps, God helps me, I could "cure" my Atom which is stuck at "Update Utility" and when I flash its ROM, never pass stage 5.
Thanx in advance. i really appreciate it.
helllo everyone...
i have a same problem..my atom is stuck on update utility screen..
dunno wat to do... i'm tryin to reflashed again..but it stooped at step five..'burn radio stack"..
i've been tested flashed it with another rom..
really appreciate any help..
kubo_yosiharu said:
helllo everyone...
i have a same problem..my atom is stuck on update utility screen..
dunno wat to do... i'm tryin to reflashed again..but it stooped at step five..'burn radio stack"..
i've been tested flashed it with another rom..
really appreciate any help..
Click to expand...
Click to collapse
Please go through this I had the same problem, but remeber to follow the instructions precisely as if u do not follow the same procedure u will not be able to correct the problem:
http://forum.xda-developers.com/showthread.php?t=358442
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Please try the search button in this forum!!! And don't worry it's not bricked;-)
sayjeng said:
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Click to expand...
Click to collapse
check your .NET Framework and see if you have the 2.0 version installed. Reboot your pc and start again. We always experience these hiccoughs.
i've tried the search..
seriously saying, its quite hard to find what i want..
i seem to be able to flash the PV_TEMP ROM, it says on my computer its successful but my PDA just goes back to bootloader.
anyway, i'm installing .Net framework 2.0... will see how that goes..
still doesn't work..
RUU says its congratulations...
PDA goes back to bootloader
i cna flash jester's rom, i can flash PV_temps rom..
but all i get is the bootloader screen after that..
can't flash the NVID thats from the upgrade guide... it just says wrong NBF file..
wonder how much will it cost for me to send it to service center to replace the whole flash chip
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
sayjeng said:
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
Click to expand...
Click to collapse
so you know now what is the problem!
recharge it by connecting to a PC with USB and wait wait wait and hope for the best. Try recharging it by what ever means you can do. If you said, you are successful in getting PVtemp, then, try installing battery_status.cab (find it search it by google or whatever) and watch the battery_status line on the front page and wait for a + sign before the 100mA at the right bottom line to appear.
Wait till it is full, then redo step 2 again. I'm sure you can get over without getting the machine to the manufacturer for repair.
no no
the first problem still stands
i'm still stuck at bootloader..
but now i can't flash anything cause my batt is dead..
so i've got 2 problems now
hello all,
sayjeng, I got the same problem last week.
I couldn't use any RUU rom because of the corrupted nbf file.
The PV_TEMP rom worked but I was stuck on boot loader screen too...
I tried many times and with some random hard resets... Eventually, the fourth time , WM5 started...
My advice are :
- charge your battery by any means like SeaPea said
- reboot your desktop computer
- remove your (fully charged) battery from your phone for some seconds and put it back...
Really, I may have been lucky that time...
I just wanted to post here to say that I sympathize...
Good luck!
will give it a try tomorrow..
its past 1am now and i need to be up early tomorrow..
if it doesn't, really have to make a trip to service center..
wonder what should i tell them then..
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
sayjeng said:
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Click to expand...
Click to collapse
me too....any progress?
Jow ... flash your rom from dopod!
If your Radio Rom is crashed ... it stuck at Bootscreen too! After that it must run! it fix partition errors too.
ROm from dopod is 2.15..
my prophet is now on 2.20...
i can't flash it... i haven't been able to find a vendor rom wiht 2.20..
does anyone have any ? Qtek maybe ?
something to get my prophet running...
cause i did try in my attempt to get my prophet back by flashing the Radio ROM.. and it fails.. maybe thats why i can't boot my prophet
tried almost every rom..
used almost every RUU
anyone got any RUU that might help ?
or any suggestions ? thinking of throwing the towel and just pass it to dopod for them to handle....
worst case, change ROM chip
finally
I got this to work using the guide - BUT:
Windows XP SP2 English was the key for me.
I used VMWare to do step 1 of flashing (NVID)
then step 2 of flashing I did on a separate PC.
Worked after so many different attempts
i am running on XP sp2 english.. not using vista..
problem is, i can't even hard reset my phone.. it just says Format is Failed.
but my phone seems fine and still responds to my plugging the USB in and reseting....
Hi sayjeng
The same problem with my imate jamin too..
Whatever you said in you posts is an exact recall of my case.
Now it makes two of us
Waiting to see if someone can come up with a solution.
IPL/SPL at 2.20
Frequent automatic disconnection from activesync.
No means to charge the battery which i think is almost dead.
Tried the Dopod rom,for no avail.
The list goes on and on just like yours.
help..Anyone..?