Can someone help me find a replacement Digitizer?
I bought my phone off of eBay a while back and it had scratches on the screen, now I want a new screen. I thought about getting one from eBay, but someone told me that those were cheaply made and came from China. And that if I tried replacing one myself It could maybe not work correctly or I could get some particles in between the screens.
Is there a place that I can get it repaired?
Also my phone won't charge anymore unless I put it in a certain position...
i got mine from ebay recently. well, i got it for T7373 international version tp2 instead.
what i would advise is, avoid from getting those cheap digitizer. they work sucks with finger. now i only able to use my tp2 with either stylus or fingernail which is seriously terrible.
and i changed it all myself. weirdly is, the digitizer need some glue to glue it to the tp2. a bad experience i had anyway.
sending my set back to my distributor for cleaning up mess soon.
I bought a replacement verizon digitizer last week
https www dot gounlock dot com
Paid $22.00 plus $10 to ship
I dropped my HTC Legend yesterday onto concrete, and now my screen is cracked. I've looked online to see if I could buy the part myself, and try and fix it myself as a local cell repair shop says it will cost 180$ to fix, for that price I'll just buy a brand new Legend and cut my losses with this one. Looking around online though, I'm unsure as to what I need to buy? I've found an LCD screen, or a digitizer... My touchscreen and all those functions work 100% all thats wrong is the glass is spiderwebbed pretty good. I'm thinking that I need the digitizer not the LCD screen? Or is there just a part thats just the glass? I'd post a picture of the phone, but I can't due to site restrictions.
I can't find any info on this, but it looks like it could be tricky to replace. I cracked my glass by dropping it onto stone, still works OK. You can pick up digitisers pretty cheap on ebay (£20 UK) but does anyone know how to replace? I read that they can be glued to the LCD?
Thanks
Google for the fixit website, if someone has done it there will be a tutorial, or you could follow the guide on here to upgrade your sd card....only because you have to take the phone fully apart. You need to check if the lcd is glued or like the iphone 4 resin. If they are a sealed unit you'd be better off getting the lcd/digitizer combo on ebay. trying to separate an lcd from the digitizer is asking for trouble imho.
I have ordered a digitiser, really hope the digitiser is not glued to the LCD, there is a big price difference. I'll let you know how I get on.
I bought a Mozart with wrecked digitizer and also want to repair it. The digitizer is on its way, so in a week i could tell you how difficult or maybe easy it is.
If you are faster, please post your experience.
I found this thread on xda.cn, and it seems that the lcd isnt glued on the digitizer, so lets hope so
hxxp://xxx.xda.cn/newshow.php?snid=2167
EDIT: sorry cantpost links, so must change the x's to t's and w's
I have got my digitiser now, looks brand new. Just need to find the time to replace, might upgrade the SD card at the same time.
Done
I did this with Andy's guide to help: http://lifeinthefastlaneok.wordpres...-7-mozart-sd-card-memory-upgrade/#comment-225
I used this guide to replace my digitiser (the glass) which I smashed. The good news is that the digitiser is not stuck to the LCD at all. I just bought a grade A digitiser off ebay for £20 which was pretty much perfect - glass was perfect with a couple of small marks on the back case, but basically like new.
There were a couple of differences to this guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
I now have a phone as good as new, I didn't replace the SD at the same time but probably will do at some point when I can stand loosing all my data.
Found time today to replace the digitizer. I also used Andy's videos for instruction. And it's really not that hard. Pretty easy for someones first mobile phone repair.
Well done, I would add for anyone else needing to do this, be very careful not to touch the inside of the digitiser or the LCD when you have it apart! Also have a glasses cloth handy for removing any dust particles just before you put it back together.
I do have one strange thing however - before I had intermittent issues where I could not slide the screen up when locked for 10 seconds or so. No I have a slightly different issue when unlocking - it doesn't always let me press on the right hand 3 numbers on the PIN screen! So it seems the unlocking issue some people have is due to a hardware issue. My digitiser was second hand so I might ask for a replacement, but I can change my pin so that it is not an issue.
My Mozart touch-screen hardly works at all plus my wife's Mozart has a cracked digitizer glass (still working fine).
So silly me I took the plunge and ordered three cheap replacement digitizers via eBay (from Hong Hong). They arrived today and all are s**t useless.
When I opened the box I smelt the rat when I spied the HTC logo on each was blanked out on the outside of the plastic zip-lock bags (with what looked like black felt pen), plus each glass has minor blemishes/scratches. Comparing each with the digitizers I removed from my and my wife's phones, they have a different design of ribbon cable conductor layout plus there are indications the plastic moulding isn't as well finished in a couple of places. Either these are factory rejects or knock-off copies. Lesson learnt :-(
Anyway, I now need to buy genuine HTC parts.
Any pointers toward reliable sources appreciated, thanks.
KJ
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Can someone who as changed a screen on this phone using Andys guide, please tell me how easy or hard it was, and how long does it take??
And would be grateful if someone could give me a link to the correct digitizer for this phone....
I am in the UK and have been qouted 50 pounds at a phone shop for the to supply and fit screen...
Did you see my post?
There were a couple of differences to this (Andy's) guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
The most tricky thing for me was getting all the dust off the LCD and the digitsier, as soon as you get it apart things start sticking to it like crazy. Have a clean glasses cloth around.
It takes about an hour on your first go. The main thing is to get the orange ribbon cablle in fully, it can be tricky - you need to get a good grip on it (fold it a little) and push it home quite hard, otherwise you get it all back together and find it doesn't work.
I have had 2 dodgy screens off ebay, £50 sounds OK if it is a brand new original HTC screen.
Or just search for 'htc mozart digitiser' on ebayt there are loads.
hsclater said:
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Click to expand...
Click to collapse
Thank you for that. A close look at the ones I bought from china I'm sure now are removed from phones with faulty digitizers, then repackaged as new. One of the three had significant dust and dirt on the inside of the digitiser screen. I've requested a refund via PalPal disputes.
I've ordered some digitizers from ecell in the UK. I'm led to believe by them that these are genuine HTC factory supplied spares.
KJ
I just replaced my 4th screen (1 broke, 2 dodgy).
This one is perfect - as new condition and works perfectly, my last one was not responsive in some situations e.g. lock screen.
This is the one I got (UK)
http://www.ebay.co.uk/itm/130498971267?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Of course, your mileage may vary - some are probably good, some not. Replace it, if it doesn't work ask for another, etc.
My new digitizers arrived today from the uk. Horray they are genuine HTC spare parts properly packaged. The downside is they don't include the frame the glass sit in and is adhered to.
So I watched the official HTC Mozart disassembly video on youtube to see how to remove the existing digitizer glass from the frame - got it apart ok after heating the unit to soften the adhesives but it didn't come away entirely cleanly i.e some of the adhesive foam broke away and was left on the underside of the glass.
So... check on eBay and found sellers selling refurbished screen frames ready for a new glass to be attached.
Will update on progress once they arrive.
KJ
just ordered my digitiser today... wish me luck...lol
poolielad said:
just ordered my digitiser today... wish me luck...lol
Click to expand...
Click to collapse
Well I am now buzzing... have just changed my screen at it works perfect.....
£50 they wanted at the shop...it cost me £13....
Just to let you know how easy this is to do........If I can do it, anyone can..
Did anyone find a reliable supply in the end? I just cracked my digitiser so looking to replace it...
--edit--
Also, how much have others paid? Don't want to be ripped off for some sub-standard part.
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
fx.lagwagon said:
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
Click to expand...
Click to collapse
Mate, I had the same problem. However it seems no one was able to help me either.
I also purchased a digitizer from Ebay for my Mozart - the exact same inverted issue occurred with me. I wasn't able to find a solution.
I'm in Australia with a T8697 model. The digitizer I received from Ebay had a circle around the windows button at the bottom - This was not on my original screen.
In the end, I purchased a digitizer from an Australian business. Cost double the Ebay digitizer did, so I hope it works... Haven't received it yet, but I'll let you know when I put it in.
What model Mozart do you own?
I just cracked my screen and HTC wants to charge me $230 to fix it. I can do the repair myself but can't find the parts. Anyone have any idea where to get these parts?
Sent from my PC36100 using XDA App
I just replaced a few 2 sets of these.
The digitizer can be purchased on the net but I received mine from ebay here
http://www.ebay.com/itm/220925620885?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
If this is what you cracked be careful removing as to not damage the LCD (Heat gun helps tremendously)
The LCD is tougher to find but you can get them on ebay here as well.
I purchased mine here took about 1.5 weeks to receive since not in the US.
http://www.ebay.com/itm/260906551668?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 $82.00
It is also available in the states through this place.
http://www.ebay.com/itm/PH-LCD-HT-2227-LCD-Display-Screen-HTC-Flyer-US-Seller-/170717545360?pt=LH_DefaultDomain_0&hash=item27bf8f0390 $119.99
I would borrow a good heat gun to separate the digitizer from the unit. You will not need to remove all parts on the rear of the unit. Back cover, battery, top main board, and unplug the digitizer and the LCD. The rest will be removed on the screen side. It is more difficult than standard units since they use a good adhesive to hold the screen. There are also some clear pieces than need to be saved as well. Both worked great but still you will have about a $150-170 invested. Since you can by a new unit on sale sometimes for around 230-240, I would weigh my options. If you are on Sprint, think will keep an account, they have it less than 200.00 with a contract. If it is only the digitizer, then by all means, fix it yourself. Things to think about.
WOW parts are almost as much as I paid for it....I'm just going to toss it and get the Transformer Prime
I would be interested in the unit if you want to sale it at a reasonableprice. Pm me. Thanks
I'm looking for whole screen bundle (lcd and digitizer) for my atrix but I couldn't able to find it yet. I found few US websites, but I don't think they ship internationally. Do you know a website who sell a whole package?
Also, I also doubt if it is worth to fix atrix in the first place. My USB input is somewhat broken (cannot connect to PC), lcd has dead pixels and digitizer is almost gone. 2 months ago phone get a little water in it so I suspect that is the problem. What do you guys recommend?
If I were you, I'd just buy a cheap used Atrix (like some bricked one) and scavenge the parts.
Yeah actually I thought that but it will be used like my phone and it can cause problems any minute. Besides, even a broken phone is almost the same price as brand new lcd + digitizers. So, if I have to choose, I'd choose to assembly lcd and digitizer by myself since it would be more solid.