Related
http://www.o2.co.uk/productsservices/xda/software/0,,174,00.html ?
rom nr 3.14.15 (latest o2 ned: 3.15.15)
?
gonna give it a go
downloading the radio stack v4.16
and radio unit upgrade 3.14.13
Going to look round this forum a little more before installing though!!
Martin
hi i have installed this yesterday and it works fine
The link above directs to O2 Uk but rom is 3.14.13 and not 3.14.15, anyone know where to get 0.15 for UK xda.
Regards
Lee
Hi All,
I upgraded my QTEK2020 to T-Mobile 1.60.00WWE. Everything normal except with radio on (radio vers. 1.06.01) sync hangs up and when i use contacts it usually hangs too...
What is the best upgrade available?
Anyone can help me? :?:
Thanks :lol:
MMoura
The latest radio stack is 1.10.00 and included in all new o2 (and i-mate) upgrades. I suggest that you take this radio stack 'cause I did not experience that kind of problems yet.
Think it should be possible to use that radio stack for qtek as well but I think that there is already an upgrade for qtek containing the latest radio stack. Maybe you should check with your provider first...
How specifically do you take parts and pieces from a ROM upgrade, or in the case of this thread the Radio Stack?
I have an MDA II, with 1.60. I did not upgrade to the 1.60.36, because I did not really hear positive things about it and my device is working quite well.
I would however like to improve the Radio Stack independent of upgrading the ROM Ext.
How do I do this?
Ed
Hi. I'm very new to the XDA II, just received mine this morning, previously had an SPV E200. I've just tried to register on myxda.com so that I could download the rom updates but it keeps saying I am enetering an invalid IMEI number and therefore I can't register to gain access to the site. Is there any other way of getting the ROM updates and also which is the best Rom to update too. I am wanting to unlock the phone to all netwroks and use with a bluetooth headset and bluetooth gps receiver.
Thanks In Adavnce
P.S. Im in the UK and on the O2 network
The official O2 Rom update can be found at the developers Source O2 site:
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
The current version is 1.60.50
I would guess that this is the version you probably have already installed.
There are a number of unofficial ROM updates which could be installed on your XDAII, these can be found searching this forum. The latest ROM version which you could install is the i-Mate 1.72.00.
Before attempting to install any new version I would suggest that you read the following post by dcs which hopefully would help you avoid the common pitfalls of upgrading:
http://forum.xda-developers.com/viewtopic.php?t=12101
i wold like to see your home cooked extended rom if you dont mind
The Hobbit said:
i wold like to see your home cooked extended rom if you dont mind
Click to expand...
Click to collapse
The attached home cooked Extended Rom 1.72.800 has been build for the following:
Device: XDAII
Operator: O2
Language: WWE
Network: Orange
A new english ROM for the Hermes has been uploaded to XDA-Developers ftp:
version: 1.21.116.4
radio: 1.05.02.00
CID: T-MOB007
BootLoader: 1.06
language: WWE
Download link and ROM details posted on the wiki shipped complete updates page.
ruu_hermes_tmhu_1.21.116.4_1.05.02.00_wwe_ship.exe
Please note this is from T-Mobile Hungary (CID T-MOB007) and not from T-Mobile UK, and it has bootloader 1.06 on it.
Thanks to the person who uploaded it!
Enjoy!
Hungarian ROM in the UK
Bought my vario 2 on e-bay and it did not come with a CD I have called up T-mobile and they wont give me one. When I switch on my phone it says "test only not for sale"...I basically looking to reinstall the t-mobile uk rom hoping that it will removed this message but can not find it anywhere. Is this Hungarian ROM going to work on a uk phone ? Are the GPRS & 3G settings the same ?
I am clueless any advice would be greatly appreciated.
Cheers
I guess you got a preproduction hermes version with a super cid and 300mhz processor...just look in the hermes wifi in preproduction section...and you will get all of ur answer....
Hi,
Has anyone tried to install this ROM yet? Is it in English?
Thanks
Msuk
Yea did someone already test this ROM ??
It should be in English, given that it has WWE in its title.
Very interesting. The very first T-Mobile Hungary ROM that has ever hit the internets.
(T-Mo Hu never releases ROMs... if you want an upgrade, you have to take it to the service and let them do it... they still sell their Wizards with AKU 1.1.1 ROMs)
Update works
Updated my Dutch T-Mobile MDA Vario II (2).
Took some time, first made Super CID and SIM lock free.
After upgrade the regional settings are indeed Hungarian but the ROM itself is English.
Thanks Y'all!
I've just updated my (I think is the right term) rom using
RUU_HERMES_HTC_WWE_1[1].35.255.2_1.35.255.102_1.08.00.10_SHIP.
Now the installation was fine but some of the original setting on the t-mobile rom are missing, like the quick launch 'running program' button on the screen, the 3g connection symbol as well as a few quick launch icon that use to be at the top of the main screen ' web & walk , contacts, notes. These have all disappeared, is there a way of getting the t-mobile vario 2 setting back or at least a way of configuring the keys to how it was with t-mobile. I think what i've currently got is the HTC original rom hence the HTC logo when I now turn the phone on.
just wondered how this rom compares to "HTC South Africa Version: 1.35.255.2" ??
Hi,
I need T-Mobile UK latest Herm Rom version. i dont mind boot-loader version as my device stuck on boot-loader screen with ver 1.06.
Ive tried to download platform builder for CE5 from microsoft but couldnt find the right download.
Please can somebody help to sort out my problem. please
Br,
XdaKing
I cant download the file. How can we download it now?
Hi,
Please, be kind enough to pass me a link to download T-Mobile UK ROM for my HERM, or Platform builder for CE please.
I was looking everywhere for T-M UK Rom but but no result.
Is there anyway we can extract the ROM from any T-Mobile HERM device and flash it to our HERM.
Many thanks in advance
Br,
Xdaking
I'm in need of one too! I'm really struggling with my Vario II
BrownAss said:
I'm in need of one too! I'm really struggling with my Vario II
Click to expand...
Click to collapse
Have you searched and looked for the rom pages in the Wiki, all roms are posted there.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
msuk said:
Hi,
Has anyone tried to install this ROM yet? Is it in English?
Thanks
Msuk
Click to expand...
Click to collapse
yes it english,I install it and it work fine no issue yet.
on herm100
problems with the Wi-fi adapter
with this ROM my wi-fi signal constantly drops, any suggestion??
I just installed this ROM on my Hermes 200, but not it just gets stuck in the "Windows Mobile" screen. It wont load after that... any ideas?
Help! Me! Please!
Hi.
Has anyone got a T-Mobile UK WM5 version available please?
I've updated my T-Mobile MDA Vario II officially from WM5 to WM6 and it's lost Hotmail (attachments), Messenger and Terminal Services Client. I need to go back! AARRGGHH!
Thank you.
New T-Mobile Hungary ROM version 1.21.116.4 (WWE)
--------------------------------------------------------------------------------
A new english ROM for the Hermes has been uploaded to XDA-Developers ftp:
version: 1.21.116.4
radio: 1.05.02.00
CID: T-MOB007
BootLoader: 1.06
language: WWE
Please new link !!!
thx
Hey all,
I have just purchased an iMate JasJam from Telstra (was a cheap display model) and i have signed up to three mobile. I want to access planet three and do everything as if i had brought the phone on three.
Can i just install the Dopod 838 Pro ROM?
Can someone post a link to a Dopod ROM? as im not allowed into the dopod website due to me not actually owning a dopod!
Any help greatly appreciated!
Regards,
Geordie
Check the Wiki, mate...
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Look for Dopod in the WWE Versions list...
Baggy
And if i download the Dopod 1.30.707.4 08/22/06 and install it, it will work correctly?
geordieb said:
And if i download the Dopod 1.30.707.4 08/22/06 and install it, it will work correctly?
Click to expand...
Click to collapse
To use planet 3 all you have to do is type three.net.au in ie.
before you can do that you will need the settings for 3services, 3mms and or 3netaccess configured. There is a tool that does it on wm6. link is below, you can try it for your WM5 rom. The dopod rom will only serve you to remove any telstra programs. If the cab program below doesnt work there is a thread which has the settings for you to enter manually.
*edit* the cab file has been removed from the thread (first one below) you will have to check back again to get it.
http://forum.xda-developers.com/showthread.php?t=299023
http://forum.xda-developers.com/showthread.php?p=1211919&highlight=australia+cab#post1211919
Dopod ROM for 3 Aus
Dopod have released a ROM update specifically for 3 in AU on 2007/03/28.
The version number is: v1.30.707.8 and it states as follows:
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
As i'm not on 3 (using Black 2.0 WM6 using Vodafone AU here) i havent actually downloaded it for myself and from the look of it, its not even mentioned on the Wiki so i cant tell you exactly whats different from the generic AU ROM v1.30.707.4 released on 2006/12/01.
If you cant find it anywhere else, maybe I could download it and get it to you somehow!
Cheers,
Chris
Dopod have released a ROM update specifically for 3 in AU on 2007/03/28.
The version number is: v1.30.707.8 and it states as follows:
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
As i'm not on 3 (using Black 2.0 WM6 using Vodafone AU here) i havent actually downloaded it for myself and from the look of it, its not even mentioned on the Wiki so i cant tell you exactly whats different from the generic AU ROM v1.30.707.4 released on 2006/12/01.
If you cant find it anywhere else, maybe I could download it and get it to you somehow!
Cheers,
Chris
Click to expand...
Click to collapse
Hey mate,
Yeah, i cant log into the dopod site as i have an imate so it doesnt accept the serial number. If you could download it and post it on a filesharing site or something, that would be awesome. I know they are fairly big so i assume that writes email out (i have space, im on gmail)
Also, is WM6 good? where do i upgrade?
Thanks so much for your help
No probs mate, its uploading to www.megaupload.com now, i'll update this post with a link when complete. (approx 25 mins to go)
EDIT: Here is the link to the Dopod ROM: http://www.megaupload.com/?d=OY2IJE79 (I'll update the Wiki with this link soon)
EDIT2: I have updated the Wiki with this ROM info. As i haven't installed it, i can't confirm the exact radio, bootloader etc versions however i believe its just minor changes from the previous release so have left most of the versions the same. http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
As for upgrading, before you do anything i would read, read and read as much of the XDA Wiki as you can. If you havent flashed any ROM's on your JasJam before you will need to do this before uprading to the Dopod ROM as your JasJam will most likely still be locked down to i-mate ROM's only and the Wiki explains exactly what you need to do.
The link to the Wiki is here ---->> http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
As for upgrading to WM6, the same advice applies. All the information you need is in the Wiki or the Hermes Mobile 6 forum and as long as you read carefully before doing anything you should be right to go.
Puckster said:
No probs mate, its uploading to www.megaupload.com now, i'll update this post with a link when complete. (approx 25 mins to go)
EDIT: Here is the link to the Dopod ROM: http://www.megaupload.com/?d=OY2IJE79 (I'll update the Wiki with this link soon)
EDIT2: I have updated the Wiki with this ROM info. As i haven't installed it, i can't confirm the exact radio, bootloader etc versions however i believe its just minor changes from the previous release so have left most of the versions the same. http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
As for upgrading, before you do anything i would read, read and read as much of the XDA Wiki as you can. If you havent flashed any ROM's on your JasJam before you will need to do this before uprading to the Dopod ROM as your JasJam will most likely still be locked down to i-mate ROM's only and the Wiki explains exactly what you need to do.
The link to the Wiki is here ---->> http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
As for upgrading to WM6, the same advice applies. All the information you need is in the Wiki or the Hermes Mobile 6 forum and as long as you read carefully before doing anything you should be right to go.
Click to expand...
Click to collapse
Have you got the ExtROM for this ROM version?
ROM Ver: 1.30.707.8
ROM Date: 12/13/06
Radio Ver: 1.16.00.00
Protocol Ver: 35.53.7018.01H
Binyo said:
Have you got the ExtROM for this ROM version?
ROM Ver: 1.30.707.8
ROM Date: 12/13/06
Radio Ver: 1.16.00.00
Protocol Ver: 35.53.7018.01H
Click to expand...
Click to collapse
y dont you download the nbh and extract it?
walshieau said:
y dont you download the nbh and extract it?
Click to expand...
Click to collapse
I already have the ExtROM but I couldn't find the network wizard cab file.
Can anybody upload the NetWiz.cab from 838Pro (WM5) ROM code for Hutchison ‘3’ Australia Network - version 1.30.707.8?
Thanks in advanced.
These settings are pretty hard to find. I think it's all I've done all night.
Courtesy of a thread on Aussie3G, I got a link to a thread on this site.
http://forum.xda-developers.com/showthread.php?t=298936
Amongst the attachments on that thread is a "CWW Enterprises AUS Operator Con.cab"
This program has configuration settings for the Australian carriers, including "Three".
I've just run it and it's created 3mms, 3services & 3netaccess, but I'm still having troubles with email. I'll be leaving it to another day now.
If you can get it all working, please tell me how
Cheers, Oggy.
User Agent String From 1.30.707.8 PIE
Hi can anybody on 3AU with the latest firmware from Dopod; 1.30.707.8, go to this web site; "www.useragentstring.com" with pocket IE and post the results from "your user agent string box" your help would be greatly appreciated
Since Dopod838 is now officially supported on X series and Planet 3, im trying to get Black 3.5 working with it completely.